Used Chip Drying Barrel for sale (7,475)

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Djdsd I T Exjpfx Ap Djku Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: good (used), Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm -Automatic opening when: setting down the barrels Dksdpfx Aed Aghkop Dju -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm -Weight: 47 kg

Condition: ready for operation (used), Heraeus UT 6060 Heating Oven No. 415 Max. 300°C Dimensions: External: 750mm x 730mm x 580mm (L x W x H) Internal: 400mm x 350mm x 380mm (L x W x H) Further technical data can be found in the images. You are welcome to come and inspect the oven. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. Djdpfjlt Ut Rox Ap Doku The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Dkedpfx Apok S Dw Ej Dsu Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2001, condition: like new (used), Filter area: 22 m²# Nominal volume flow: 4700 m³/h Minimum flow rate: 3530 m³/h External pressure suction port at V min.: 2450 Pa Sound pressure level max.: 69 dB Suction nozzle Ø: 250 mm Suction engine speed: 3000 rpm Motor: 400V 5.5KW Dksdpfx Aek Tahzop Dju Required space: 2520 x 900 x 1963 mm Weight: 730 kg

Condition: good (used), Offer 24083 Technical data: - Capacity 300 L - Load capacity up to 750 kg - Entry pockets for forklift trucks - Tipping function - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg Dkeder Hn Daepfx Ap Deu

Condition: new, Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Dkodpfx Aperxtuis Dsu Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips Djdpfxorxw E Ne Ap Deku -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

Condition: good (used), Year of construction: 1987, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 mm -Transport dimensions: 2510/1600/H2380 mm Dkodpfx Asryalbep Dju -Weight: 1500kg

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm Dodob A E Uhopfx Ap Doku -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Year of construction: 1994, condition: used, dryer dry-air KOCH CKT 300, 300 m³/h, year: 1994, price: 4.900 €, contact: Mr. Rainer Eckerle Djdpeb Hu S Tofx Ap Dsku

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm Dkedpfx Aob Iqf Uep Dju -Weight: 280 kg

Condition: new, Year of construction: 2026, Rotary dry vane vacuum pump model MVS-V250. Available in stock. Dodpfjftzvisx Ap Doku Completely new with 12 months warranty. Nominal flow: 250 m3 / h at 50Hz. Final vacuum: 200 mbar Any clarification, do not hesitate to contact us.

Condition: reconditioned (used), complete plasticizing unit for DEMAG 2,300 machine, with an 80 mm screw and barrel. Dedefwcttjpfx Ap Doku

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Dksdpfx Apefzb Nio Deu Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Dedsfz U Hvepfx Ap Djku Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2026, condition: new, DESCRIPTION Horizontal drum chipper, engineered and built for maximum performance and reliability. This heavy-duty, robust machine is suited for the most demanding conditions and is ideal for processing all types of waste wood materials. The Varli VDC-1600 drum chipper features a large infeed opening, making it highly capable of processing waste wood material, logs, and wood bundles (diameters over 700 mm can be easily accommodated). The VDC-1600 can achieve outputs of approximately 100,000 kg per hour of high-quality pulp mill chips or finer fractions suitable for biofuel production. The chipper can also deliver coarser fractions, producing chips up to 200 mm in length (depending on configuration). Built with a heavy-duty frame, the chipper features over-sized, self-aligning bearings housed in steel casings, firmly secured to the chipper’s side structure for long service life and reliable operation. Equipped with 14 feed rollers fitted with special, wear-resistant, surface-hardened teeth, the VDC-1600 provides secure feed and optimised material throughput. The chipper comes standard with drum-mounted cutting tools made from Hardox, along with replaceable wear plates. OPERATING PRINCIPLE The VDC-series is designed to produce wood chips from logs or bark bundles. Material is horizontally fed by vibrating chute into free-floating feed rollers, which automatically adjust to the material’s height. The feed rollers securely grip and transport the material into a high-speed rotating drum armed with solid knives, fixed with centrifugal wedges—fostering durability, preventing knife damage, and minimizing downtime during tool changes. The rotor knives are easily accessible and can be re-sharpened multiple times. Key features include an adjustable stator knife, hydraulic hood, and hydraulic device for stator knife exchange. BENEFITS - Extremely robust construction and heavy-duty design for stable operation - Centrifugal wedge knife mounting for reduced machine downtime - Adjustable stator knife to extend operating life - Hydraulic hood for swift and easy maintenance TECHNICAL DATA Dkedpfsyi H Rysx Ap Dju Model: VDC-1600 Infeed Width: 1250 mm Rotor Diameter: 1600 mm Number of Infeed Rollers: 14 Number of Cutting Tools (Knives): 4 Drive Motor(s): 2 x 400 kW Electrical Supply: 400V, 3Phase, 50Hz Fraction Output: 60 mm (SPF), approx. 100,000 kg/h Total Weight: 96,000 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Dkedpfx Apoznca Hs Dju Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed with ash discharge with control

Year of construction: 2000, condition: good (used), functionality: fully functional, The system is suitable for the accelerated drying of painted components, which are transported through the dryer on trolleys with a chain conveyor. The dryer has a total length of approx. 20m and is equipped with a high-speed door on both sides. Maximum component length is approx. 5m. The heating medium is hot water 90°/70°C. The plant can currently still be viewed in operation. Dksdpfx Apovi Hdvs Dju

Condition: used, Year of construction: 2002, functionality: fully functional, – German-made – Year of manufacture: 2002 TECHNICAL SPECIFICATIONS: – Feed opening (length / width): 1000 / 800 mm – Rotor diameter: 200 mm – Rotor length: 800 mm – Main motor: 11 kW – Hydraulic pump motor: 1.1 kW – Number of knives: 19 pcs – Reversible cutting knives: 40 mm x 40 mm, serrated – Screen: Ø 20 and 25 mm – AUTOREVERSE – HYDRAULIC DRAWER – Clamp drawer height: 140 mm – Extraction outlet diameter: Ø 200 mm – Dimensions (L/W/H): 230 / 160 / 215 cm Dksdpfx Aow Ip R Tjp Deu – Weight: ~1650 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, volume flow: 1,526.4 m³/h, type of cooling: air, pressure (max.): 14 bar, Equipment: type plate available, Used Atlas Copco FX17 refrigerant dryer Dksdpozzn D Rsfx Ap Dju 25.44 m³/min 14 bar Year of manufacture: 2021

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, volume flow: 1,116 m³/h, type of cooling: air, pressure (max.): 14 bar, Equipment: type plate available, Used Atlas Copco FD310 refrigeration dryer 18.60 m³/min 14 bar Year of manufacture: 2011 Dkjdpfx Apsym Ub Uj Dsu

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Width of metal links: 200 mm Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at the top: 400 mm Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Dkodpfx Aehwt H Aop Dju Motor power, belt drive: 0.37 kW Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Dsdpfopy Uzyex Ap Deku Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, Tipping container for forklift trucks RMS Rotherm Mechanical Systems Type KK-125 Chip bin - bulk tipping container - folding container Manufacturer no.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping body - Tipping process is triggered by gravity Dkedjxpqzzopfx Ap Dsu - 4 polyurethane swivel castors, Ø 160 mm, 2 of which are swivel-mounted - Fork entry pockets/forklift attachment Dead weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with chassis: 1190 mm Good condition Suitable for collecting, storing and transferring recyclables