Used Cloos Wire Feed Case for sale (15,012)

Condition: used, Year of construction: 2007, Travel distance: X 500 mm Y 350 mm Z 300 mm Water bath machine Gisdpsuu Dl Rjfx Anxjt Automatic wire threader

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Gijdpfx Aney R Npcsxet Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1990, functionality: fully functional, Control panel at the top, electric spindle lift, 30 mm spindle, electric tilting 45° 6 speeds, motor power 7 kW, cast iron fence jaws, large table 2500 mm, Haffner 4-roller feed unit with 8 speeds, dimensions 2500 x 1100 x 1680 mm, weight 1000 kg, Gijdpjyaq U Djfx Anxot good condition Price ex location Transport available at extra cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Year of construction: 2012, condition: excellent (used), 1 used feed water tank ----- cylindrical, horizontal on saddle feet, insulated with degaser Giodemfq Rkspfx Anxet capacity approx. : 5.900 ltr max. allow. work. pressure : 0 / + 6 bar max. allow. work. temp. : 0 / + 200°C year of construction : 2012

Year of construction: 2008, condition: used, Case packer für 10 and 6 packs of 330 ml disposable bottles. Inclusive videojet printer dating machine construction year 2016. The line is controlled via a S7 Touchpad. Voltage: 400 V Compressed air: 6 bar Length: 5,4 m Width: 1,15 m Height: 1,95 m Weight: 700 kg Base construction: on feet Features: Inkjet Dating machine construction year 2016, hot glue unit Godpevcqn Esfx Anxeit

Condition: new, Shaft diameter: 120roll diameter: 390motor power: 15length: 2000width: 1650heigth: 1900weight approx.: 4450 Standard Equipment • Steel construction frame • 3 rolls powered by hydromotor and planetary gearbox • Horizontal and vertical working position • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-tensile special steel • Digital read-outs (2 pcs) • 3-axis hydraulic lateral angle guide rolls • Two-speed working system • Hydraulic elements: Duplomatic (Italy) components used • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Built according to EC safety directives (CE mark) and ISO 9000 certificate • User’s manual in English Options: - NC Unit 7 Screen EURO 7.500,-- Capacity Chart: NoProfile TypeSize Max Min. es1125x25 1200 Standard Rolls2200x50 1000 Standard Rolls365x65 750 Standard Rolls4Ø80 850 Optional Rolls5Ø5”x6,35 1500 Giodpfxsy Hymqs Anxot Optional Rolls6Ø160x4 2800 Optional Rolls7120x40x4 1800 Optional Rolls890x5 1800 Optional Rolls9120x120x12 1200 Optional Rolls 10100x100x10 1200 Optional Rolls 11100x11 800 Standard Rolls12100x11 1000 Standard Rolls13100x11 800 Optional Rolls14UPN 220 1000Standard Rolls*15UPN 220 1200 Standard Rolls*16IPN 220 1000 Standard Rolls *17HEB 120HEA 14012001200Standard Rolls *18UPN 120 10000 Optional Rolls 19IPN 160 5000 Optional Rolls 20HEB 100HEA 12016004000Optional Rolls

Year of construction: 2026, condition: new, High precision servo feeder solutions for press lines, punching systems and automated metal forming applications. Bosporas Machinery is a manufacturer of coil processing, press feeding and automation systems, delivering high-performance and customized industrial solutions worldwide with strong R&D capabilities. Our servo feeder systems are designed for accurate, synchronized and repeatable material feeding in press lines, punching operations and automated production systems. Equipped with advanced servo motor technology, the machines provide precise feeding length control, high-speed response and stable production performance. Suitable for both standalone use and complete line integration, Bosporas servo feeders can be customized according to material width, thickness, feeding length and production requirements. Whether for new investments, line upgrades or replacement projects, we provide reliable and efficient feeding solutions for modern manufacturing environments. ⚙️ AVAILABLE SOLUTIONS Standalone Servo Feeders Press Integrated Feeding Systems Coil Line Servo Feeding Units Giedpfey E Hnrex Anxet Custom Feeding Automation Solutions 📊 TECHNICAL RANGE Feeding Length: Customized according to production needs Working Width: Customized according to material width Material Thickness: Based on application requirements High feeding accuracy and repeatability Continuous industrial duty operation 🔧 ENGINEERING FEATURES High-performance servo motor driven system Precise feeding length control Fast response and synchronized operation Programmable feeding parameters Multi-job memory capability PLC & HMI control interface User-friendly operation panel Heavy-duty industrial machine structure ⚡ OPERATIONAL ADVANTAGES Improved production accuracy Faster setup and job changeover Reduced material waste Stable and repeatable feeding performance Easy integration with presses and automation lines Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Press feeding lines Punching systems Stamping operations Roll forming pre-feeding systems Automotive suppliers White goods industry General sheet metal processing 🧩 OPTIONAL CONFIGURATIONS Different feeding widths and capacities Custom control software Automation upgrades Press synchronization packages Turnkey integration solutions 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar servo feeder systems successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request.

Condition: used, Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees Gjdownhabepfx Anxjit input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Documentation available: No - CE certificate present: No - Number of cylinders [pcs]: 6 - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm Godpfx Ajw N D Suonxeit point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Giodpfx Aeuhxqmonxjt Constr. year: 1994 diameter range: 2,5-3,8 mm nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !!

Condition: good (used), Year of construction: 1980, Technical Details ; Wire Diameter - 1.2- 4,5 mm Nails lenght - 10- 150 mm Capacity - 800 kg/h List of equipment : 1x Wafios S150 2X Wafios S120 1x Kovopol THA 60 Gjdovfc A Tspfx Anxeit 1X Kovopol THA 100 1X Moroni SPND 80 2x Nails polishing machine Wire Drawing Line SKET 5 Blocks Wire input - max. 6,0 mm Complete nail making plant in good working condition !! wire output - min. 2,5 mm

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. Giodpfx Ajyubh Rsnxot They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Year of construction: 1987, condition: good (used), Technical Details : Input wire - 7.0 mm Out put - 1,8 mm Gedpedzru Ujfx Anxjit Vertical and horizontal Coiler Motor power - 55 Kw/ Block

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Gieder Nfvmepfx Anxst Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Godpemqk Tpofx Anxoit Power - 3,5 kw

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: Gjdpfx Anen Ut A Soxjit 1997

Condition: good (used), Year of construction: 1994, functionality: fully functional, Forward and reverse operation, 3-1000 rpm, Brake motor with Haffner 3-roller feed unit, 8 speeds in good condition 5.5 kW Transport available at extra cost! Gijdeybv A Ajpfx Anxjt

Year of construction: 2007, condition: used, Case maker Hoerauf BDM Speed Year: 2007 The BDM Speed is a high speed casemaker with an output of 85 cases per minute, specially designed to meet the requirements of medium and large size companies, for the production of book cases with rigid or flexible spine, as well as one-piece cases for ring binders and letter files. Description: - Colour monitor - Automatic setting - Board pre stacking conveyor - Board magazin - Board cutter: KS - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing quarter-bound cases in 2 passes - Pressing station - Stacking delivery - Pump Palletiser Solema Cartesio Year: 2006 Description: - Automatic setting - Colour monitor with touch screen Giodpfxsvcmilj Anxjt - Infeed conveyor - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system Hörauf (also known as Hoerauf or Horauf) Size range opened case (max): 680 x 380 mm Size range opened case (min): 190 x 130 mm Max. mechanical speed: Up to 85 cases/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Giedey Iddiopfx Anxst

Year of construction: 2014, condition: used, Used machinery. 3 of total available. Gijdpfx Ajy R U Spsnxst

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3–18 m/min), electronically controlled height and angle adjustment, spindle diameter 30 mm, Centrex access protection for spindle moulder, fence for max. cutter diameter 250 mm, continuously adjustable fine setting for the outfeed side (+35/-10 mm) with digital display, fully position-controlled, adjustable spindle fence with flip-up/down function, 550 mm anodised ALU fence rails with safety rulers, quick-clamping device for fence, 1270 mm pull-out frame with emergency stop, EURO cutter guard, 5.5 kW motor with variable speed control, speed range: 1,500–10,000 rpm, speed range high-speed spindle: 8,000–15,000 rpm, operator panel at eye level with x-motion control, table size: 1160 x 770 mm, table opening: 320 mm, swing-away device for feed on F 900 incl. feed extension. Gijdey H Hf Tspfx Anxot Location: Nattheim

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 440 CC Year of manufacture: 2004 Charmilles Millenium control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Machine dimensions (complete): 2600 x 2810 x 2240 mm Total machine weight: 3300 kg The machine is currently connected to power and can be inspected under power. On request, we offer the following services: - Commissioning of the machine at your site Gsdpfx Aney Ifrhoxjit - Overhaul with 6 months warranty - Control system training - Accessories such as chiller and clamping devices

Condition: used, Colour: Grey Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T Giodpswng S Aefx Anxot 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Number of cylinders [pcs]: 10 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,435 mm, total width: 2,203 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 725 mm, workpiece length (max.): 600 mm, overall weight: 2,850 kg, warranty duration: 12 months, The Kmway EK-Series Wire EDM machine has been developed for users who value accuracy, efficiency, and long-term reliability. Thanks to its compact design, advanced wire threading technology, and robust, thermally balanced construction, it offers the perfect combination of precision and practical application. Why choose the EK-Series? – Next-generation Automatic Wire Threading (AWT): Highly reliable threading system that operates with or without flushing, increases machine uptime, and reduces operator intervention. – Linear Motor Drive: Friction- and backlash-free motion improves long-term cutting accuracy and reduces mechanical wear compared to conventional ball screw drives. – Extremely Rigid One-Piece Frame: Thermally balanced and designed for stability – ensures dimensional accuracy even during long or high-load machining cycles. – Small Footprint, High Performance: Compact design with integrated generator and filtration system, ideal for confined workshop spaces without compromising on performance. – Advanced Filtration System: The improved design allows for a 3 to 5 times longer filter life than conventional systems and enables quick and easy replacement when needed, minimizing downtime. – Operator-friendly Head Design The upper and lower heads are optimized for easy maintenance access, ensuring consistently high output quality with less effort. Gijdpfx Anjy Rk H Noxjt With decades of experience in the field of electrical discharge machining (EDM), Kmway provides energy-efficient, high-precision solutions that are appreciated worldwide. Technical Specifications: Axis Travel (X, Y, Z) mm: 400 x 300 x 220 Axis Travel (U, V) mm: 60 x 60 Maximum Workpiece Size (W, D, H) mm: 725 x 600 x 215 Maximum Workpiece Weight kg: 350 Axis Drive System: Linear Motor for X and Y axes U + V + Z: AC Servo Motors X-Y Axis Traverse Speed mm/min: 1800 Wire Diameter mm: Ø 0.15–0.3 (Standard 0.25) Maximum Taper Angle: ±14.5°/80 mm Machine Weight kg: 2850 Machine Dimensions (W x H x D) mm: 2203 x 2015 x 2435

Condition: excellent (used), Catalogue number 7670 TECHNICAL DATA - Track width: 340 mm - Roller width: 400 mm - Max. blade diameter for multi-blade saw: 350 mm - Blade bore diameter: 80 mm - Max. cutting height for edger: 100 mm - Max. cutting height for multi-blade saw: 120 mm Giodpfxsyk E Hpj Anxot - Table width with clearance: 900 mm - Table length: 1780 mm - From above: - Kickback fingers - Pressure roller, sliding, metal - Kickback fingers - Pressure roller, sliding - Saw shaft with blades - Pressure roller, sliding - Sliding pressure shaft, metal - From below: - Guide bar - Kickback fingers - Track - Central lubrication - Stepless feed speed adjustment - Electric lifting of saw shaft 0.75 kW + body 1.1 kW - Feed motor 1.5 kW - Main motor 22 kW - Floating saw movement 0.55 kW - Lasers (not working, require inspection) - Extraction port diameter: 210 mm - Overall dimensions (L/W/H): 2200 x 1450 x 2000 mm - Weight: 1925 kg ADVANTAGES – Made in Germany – Shaft with floating blade for edging – Additional sleeve for multi-blade saw included – Used multi-blade saw, in very good condition Net price: 58,900 PLN Net price: 14,030 EUR (based on exchange rate 4.2 EUR) (Prices may change with larger fluctuations)