Used Tilting spindle moulders for sale (68)

Condition: used, Year of construction: 2009, table length: 2,600 mm, power: 7.5 kW (10.20 HP), table width: 920 mm, No. 04469 Spindle moulder / swivel spindle milling machine Casolin F 45 KL EVO Used, year of construction 2009 Very heavy version with full equipment Control unit EVO EL 2 with programming functions The body of the machine consists of one part Spindle swivels +/- 45.5° on both sides 4-axis control EVO Spindle diameter 30 mm Effective height of the spindle 140 mm Maximum tool diameter for profile milling 250 mm Maximum tool diameter for tenoning 300 mm Motor power 7.5 kW Direction of rotation right/left Speeds 3000 / 4500 / 6000 / 8000 / 10000 rpm Table with extensions 2600 x 920 mm LW Including 3-roller feed unit Maggi 2 suction connections each 120 mm diameter Transport dimensions approx. 2600 x 1500 x 2000 mm LWH Weight approx. 1350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location Bslewhck Uerh I Igjwl

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Bwolrh I Ieiknp Rjgol Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: good (used), Code: 0105 Brand: SCM Model: T 150 - CE Standard Bwslrh Ijwgkg Ij Igel Automatic spindle moulder with tilting shaft and extended tables - CE standard Technical data: Shaft tilting from -10 to +45 degrees Shaft diameter mm 35 Worktable length mm 2600 Height from ground of worktable mm 920 Max shaft projection from worktable mm 215 Shaft rotation speed rpm 3000/4500/6000/7000/10.000 Motor power Hp 7,5 Motorised shaft lifting Motorised shaft inclination Diameter of suction mouth mm 120 Adjustable table Automatic movement register with display Extension for supporting large workpieces Support for feeder Automatic 4-roller feeder with variable speed Overall dimensions: mm 2600 x 1400 x 1800 h Weight kg 990

Condition: used, Hofmann TFS 107 heavy-duty tilting spindle milling machine Electrically tiltable spindle on both sides, diameter 30 mm Swivel range -45.5° / +45.5° Spindle rotation left/right Motorized spindle height and tilt adjustment with LED displays Milling spindle with variable speed from 1,500 - 10,000 rpm Milling stop 2620 with cast-iron jaws and safety rulers Overall adjustment via handwheel and LCD display Digital display for individual jaw adjustment Motor 7.5 kW Table length 2000 mm Including 4-roller feeder Year of manufacture 2019 Bsljwc N Tferh I Igowl Machine is in perfect working order and in very good condition Retired from a carpentry workshop Ex works

Condition: used, Year of construction: 1996, Hofmann TFS 2000 Tegamatic Table size 1600 x 820mm Table Heigth 890mm Motor power 7,5 kW Speed 1500/3000/4000/4500/5000/6000/8000/9000/10000 Tilting -15° / +45° Heigth adjustment 125mm Dust extraction 2 x 120mm Air speed 20 m/s Weight 1000 kg Bolowgbfbjrh I Igowl (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Bäuerle Type 201 tilting spindle router for profiling and milling wood with electric height and tilt adjustment, as well as an Aigner integral stop and feed unit. table width: 2.000 mm Direction of rotation: Left Right Spindle ø: 30 mm clamping length: about 120 mm number of revolutions: 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm Bweljwdrvxsrh I Igsl

Condition: new, Year of construction: 2024, Functionality: fully functional, height adjustment type: electric, power: 7.5 kW (10.20 HP), Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° Bwslrh Iju Nz Ndj Igsl 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Bwolocuwptorh I Igjl (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Code: 0099 Brand: HOFMANN - GERMANY Model: TFS 1245 - CE Standard Automatic spindle moulder with spindle tilting +/- 45 degrees with extended table - CE Standard - Year 2008 Sturdy structure with cast iron table Table size mm 2050 x 815 Extractable support extension for large workpieces Spindle diameter mm 50 Spindle tilting +/- 45 degrees Motor power Kw 4,7 - 6,3 Spindle speed 3000/4000/5000/6000/8000/10000 rpm with display Electric spindle lift with display Electric spindle tilting with display Reversing spindle rotation Adjustable spindle moulder fence with displacement visualised by mechanical numerators Hanging control panel Bwjlrh I Iewd Ityegel Aigner accident-prevention guides Spindle protection Arrangement for feeder 2 Suction ports diameter mm 120 Overall dimensions mm 2050 x 1250 x 1850 h Weight kg 900

Condition: used, Heavy-duty spindle moulder SCM T 160 Automatic tilting – 45° Automatic up/down Milling spindle with 5 speeds: 2900 to 10,000 rpm Motor approx. 7.5 HP Bwjlrhjv D H Uko I Igjl Including 3-roller feeder Machine is in working order Ex works NET €2,900.00

Condition: used, Year of construction: 1979, Functionality: fully functional, Spindle diam. 30 mm Speeds 2,800 - 4,500 - 6,500 - 10,000 rpm Motor 10 HP Bolrhsum S Azo I Igjwl Table dimensions 1,100 x 1,000 mm Suction nozzle diameter 2 x 120 mm Swivel range -5 to +45 degrees Max. spindle stroke 130 mm Various tools available at extra cost incl. 4 - roller feed unit HOLZHER type 1112 4 speeds each in forward and return motion Self-made table extension right & left

Condition: new, Year of construction: 2024, STOMANA T 1000 S Dimensions of the work table, mm 1000 x 550 Dimensions of the movable table, mm 1150 x 350 Bslrh Isllun Ns Igowl Spindle diameter, mm 30 Spindle tilting 90° / 45° Vertical travel of the spindle, mm 175 Spindle working height, mm 125 tool diameter, mm: - for shaping - for machining of journals diam. 180 Wed. 250 Engine power, kW (HP) 4.0 (5.5) Revolutions, min-1 1400 / 3500 / 6000 / 8000 Weight, (kg) 390 Telescopic guide bar 900 with 2 stops: Left / right spindle rotation: Spindle protection for profiling, mm dia. 250

Condition: good (used), Year of construction: 2002, Robust swivel milling machine T 26, swivels from -45 to +45 degrees with 2-axis positioning control Duocontrol Swivel milling machine with very good equipment A treat for every Martin fan Bwelrhovv H T Ro I Igsl Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L running Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is shown in the upper display, which is then set at the stop, so settings can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel-fix quick-change spindle with torque wrench Electrically adjustable stop, inlet jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of the height and stop Stop can be swiveled away with lifting device (for curved milling work) Table opening via eccentric table rings, electrically adjustable Table extension right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Foldable stop for insert milling Original Martin aluminum stop jaws with two bars Workpiece pressure device Aigner Centrex 3-roller feed HolzHer 1117, with 8 speeds, R/L running, new rollers Feed socket, can be switched from the control system Extraction nozzle 2 x 120mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been repainted Approx. 7400 operating hours Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this provider".

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Bwjlrhsr Hr D No I Igel Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: used, Motor power: 10.0 PS/HP (7.35 kW), milling unit with controlled height and angle adjustment, milling spindle lock from outside, max. milling cutter diameter 250 mm, table size 1160x770 mm, milling stop rail set INTEGRAL Bwjlsvwl D Rorh I Igol

Condition: like new (used), Year of construction: 2020, operating hours: 40 h, Functionality: fully functional, machine/vehicle number: 424.01.131.21, The spindle moulder was located in a small carpentry shop and has a maximum of 40 working hours. Therefore, it is in mint condition. The feed mechanism is not an original Felder product and was installed later. The description in the images is an original text from Felder. Bjlrewdrraeh I Igswl Inspection possible on-site. Pickup only, no delivery.

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, milling spindle length: 150 mm, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Bwolrh I Ijwcpqqogol Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Mill arbor with 40 mm diameter and 150 mm length

Condition: new, Year of construction: 2024, ROBLAND T 120 TP voltage 3 x 230V / 3 x 400V weight 1070 kg motor power 7 kW (optional 9.2 kW) table dimensions 1200 x 705 mm table height 930 mm interchangeable spindle diameters 30 / 32 / 40 / 50 mm 1" 1/4 spindle length 180 mm Bwolrellup Reh I Igsl height adjustment 205 mm number of revolutions per minute 3000 / 4500 / 6000 / 7000 / 10000 max diameter and height of the table 320 x 95 mm dimensions of the movable table 760 x 500 mm table height adjustment 1050 mm diameter of the extraction spigot 120 mm

Condition: excellent (used), Year of construction: 2007, Robust swivel milling machine swivels from -45 to +45 degrees Bwslrsvbrygsh I Igjl Tiltable milling machine with very good equipment A treat for every Hofmann fan Complete 3-axis positioning control for spindle height, spindle tilt and stop. Programs can be saved All three axes can be positioned. Adjustment of the single jaw with SIKU counter Swivel control panel at eye level for control Manual movement of each axis and positioning to the set target value Pole-changing drive motor 4.7 / 6.3 kW with automatic motor brake R/L run Swivel angle electrically adjustable from - 45 to + 45 degrees Height adjustment max. 125mm, electrically adjustable Six speeds 3000, 4000, 5000, 6000, 8000 and 10,000 rpm Spindle diameter 30mm Fence is adjusted electrically Electric spindle lock for tool change Table with table slide instead of table rings Planed machine table 2750mm long Extendable workpiece support at the front Cast fence jaws Aigner Centrex workpiece pressure device 4-roller feed Holzkraft, with 8 speeds, R/L run, new rollers Feed socket, switchable from the control unit Extraction socket 2 x 120mm Compressed air connection 6bar 2 emergency stop switches Original paint, partially repaired Operating instructions CE mark Dimensions approx. 2800 x 1350 x 1900mm (LxWxH). Weight approx. 1300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Hofmann TFS 2000 spindle moulder available for sale due to new purchase starting around the beginning of June. Built in 1997. 7.5 kW motor. Table length 2 meters. Spindle electrically adjustable from 1000-10000 rpm. Electric spindle lock. Spindle tilts from -15° to +45°. With Aigner folding stops. With programmable speed, height, and tilt adjustment. Bwolrh Iewcz Afj Igsl Stop manually adjustable. With 3-roller feeder type 1117 from Holzher.

Condition: used, Year of manufacture: 2023, Milling machine speed: 3000/6000/8000/10000 rpm, Milling table opening: 180 mm, Sturdy and compact milling unit for many years of satisfaction:, Milling spindle usable height above table 100 mm, Forced-guided height adjustment in cast iron bushing, The MULTI adjustment system, Safety rulers Bwjlrheunvbwj I Igol

Condition: used, Year of construction: 1990, used, good conditionMake Panhanstype 240Year of construction 1990Machine no. 212Motor boosted 11 kWswiveling from -5 to +45Speed levels 3000 / 4500 / 6000 / 9000 ht-left runTable size 1350mm x 800mmTable top extension approx. 600/2400 mmFrame support extendableMilling arbor diameter 30 mmcast stop jawsMilling fence with fine adjustmentElectric height adjustment, tiltingDigital displays for swivel spindle spindle heightPower socket for feederExtraction connection D 2 x 120 mmSpace requirement approx. 2500 mm x 1300 mm x 1300 mmWeight approx. 1100 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Bslrh Iovwfx Uj Igowl

Condition: good (used), sander consisting of: first group - electronic cross belt second group - electronic pad belt third group - electronic pad belt superfinisher machine with inverter on belt and vacuum for small parts Bwslrh Iet N Tfcs Igsl line machine

Condition: used, Year of construction: 2013, No. 04456 Spindle moulder Griggio T 45 i Used, year of construction 2013 Milling spindle swivels +/- 45° on both sides Brake motor 5,5 kW Manual swivel by crank Spindle height electrically adjustable Digital display for milling height and milling angle Long table 2600 mm x 750 mm LW Belrhsv D Hy Tj I Igswl Speeds 1500 / 3000 / 4500 / 6000 / 9000 rpm Max. tool diameter: Profiling 260 mm / Slotting 350 mm Clamping length 140 mm Milling protection and fence AIGNER Integral Arch milling hood CPS Extendable workpiece support CE-compliant Transport dimensions 2600 x 1200 x 1800 mm LWH Weight 750 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Engine power: 5.5 HP (4.0 kW), year of manufacture: 1991, tiller: Rigid, tiller speed: 4 speeds, incl. operating tool Bwjlsu Dxhyerh I Igjl