Used Cormak Wrhs 1020 for sale (1,036)

Condition: new, Year of construction: 2026, CORMAK HBS700 Band Saw Nedpfx Ajvugtnjb Usdb The CORMAK HBS700 is a high-performance band saw designed for professional cutting of metal, wood, aluminium, and plastic materials. Thanks to its large guide wheel diameter, powerful 4 kW motor, and robust construction, the HBS700 band saw is an ideal solution for production plants, metalworking workshops, woodworking facilities, and industrial applications. Main Advantages of the Machine Large working capacity – maximum cutting height of 430 mm and cutting width of up to 700 mm allow machining of large and heavy workpieces. High-quality work table – a cast iron, ground, and polished table ensures stable material support and precise cutting. Quick blade tensioning lever – reduces setup time and simplifies blade replacement and maintenance. Wide table tilting range – adjustment from -5° to +45° enables precise angled cuts. Blade tension inspection window – allows continuous monitoring of blade tension without stopping the machine. Constant blade speed of 18 m/s – optimized for cutting materials with different hardness levels. Construction and Technology The CORMAK HBS700 is an industrial-class band saw based on a rigid steel structure and a heavy-duty machine frame, ensuring long service life and resistance to deformation. The large band wheels with a diameter of 680 mm provide smooth operation and stable blade guidance. The machine is powered by a three-phase motor with a power rating of 4.0 kW (S1) / 5.6 kW (S6), allowing efficient operation even when cutting thick and demanding materials. Integrated dust extraction outlets 2 × 100 mm enable effective connection to extraction systems for sawdust and chips, significantly improving workplace cleanliness and safety. Precision and Working Efficiency The large work table measuring 790 × 500 mm, combined with a wide cutting blade (up to 40 mm) and a rigid guide system, ensures high-quality and repeatable cuts even in demanding applications. The operator has full control over cutting direction, angle, and depth. The well-balanced construction minimizes vibration and reduces the risk of cutting errors, ensuring smooth and accurate operation. Applications The CORMAK HBS700 band saw is suitable for: Cutting non-ferrous metals and structural steel, Processing solid wood and laminated timber, Prototype and production work in industrial facilities, Cutting technical plastics and composite materials, Use in technical workshops, tool rooms, and metalworking facilities. Standard Equipment High-voltage release safety switch Precision rip fence Cutting blade 5020 × 25 mm, 10 TPI Optional Equipment Extraction hose Ø100 mm Clamps for dust extraction connection Transport trolley or mobile base Technical Specifications Parameter Specification Wheel diameter 680 mm Maximum cutting height 430 mm Maximum cutting width 700 mm Work table dimensions 790 × 500 mm Table tilt range -5° to +45° Blade width range 19 – 40 mm Blade length 5020 mm Blade speed 18 m/s Overall dimensions 1090 × 700 × 2430 mm Weight 308 kg Motor power S1 / S6 4.0 / 5.6 kW Dust extraction outlets 2 × 100 mm Power supply 3-phase, 400 V Operating manual (DTR) Included CE declaration Yes

Condition: new, Year of construction: 2026, CORMAK PT410 Planer Thicknesser – Professional Woodworking Machine The CORMAK PT410 planer thicknesser is a high-performance woodworking machine designed for professional applications in carpentry workshops, furniture factories, and industrial production facilities. The applied technical solutions ensure exceptional precision, stability, and operator comfort during both surface planing and thicknessing operations. The PT410 model offers an impressive 410 mm working width and a powerful 5.2 kW (S6) motor, meeting the requirements of the most demanding users. Main advantages of the machine Heavy-duty, robust construction – a 330 kg machine weight and cast iron working tables eliminate vibrations, ensuring stable operation even when processing large wooden elements. S6: 5.2 kW motor (S1: 4.0 kW) – high motor power enables smooth machining of hard wood species and intensive operation without the risk of overload. Working width up to 410 mm – ideal for processing wide panels, beams, countertops, and furniture boards. Quick change between operating modes – eccentric locking mechanisms allow switching from planer mode to thicknesser mode within seconds. Aluminium fence with angle scale – precise adjustment from 90° to 45° enables machining of angled and bevelled elements. Central thicknessing table lifting system – ensures uniform material guidance without tilting or uneven thickness. Construction and technology Ndsdpfxovxh T Ds Ab Usb The CORMAK PT410 planer thicknesser is built on a heavy welded frame with precision-ground cast iron tables. The 1660 mm long planer tables provide excellent material support and accurate feeding. The cutter block rotates at 5500 rpm and is equipped with three precisely adjusted HSS knives measuring 410 × 25 × 3 mm, allowing smooth and high-quality surfaces after a single pass. The 120 mm dust extraction outlet ensures efficient chip removal, which is essential during continuous operation. Precision and working efficiency The PT410 allows machining materials with a height range of 5–225 mm and provides a maximum cutting depth of 3.5 mm in thicknessing mode. The 7 m/min feed speed enables fast and efficient processing of large quantities of wood. Thanks to the accurate height scale and ergonomically positioned adjustment wheel on the right side of the machine, the operator has full control over machining parameters. Standard equipment Three HSS knives, dimensions: 410 × 25 × 3 mm Cast iron planer tables (1660 × 410 mm) Cutter head guard Feed stop switch and emergency STOP switch Ø120 mm dust extraction outlet Polish-language operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 5500 rpm Dust extraction outlet diameter 120 mm Tilting angle of fence 90°–45° Number of knives / dimensions 3 / 410 × 25 × 3 mm Maximum planing width 410 mm Maximum thicknessing width 408 mm Maximum thicknessing height 5–225 mm Maximum thicknessing cutting depth 3.5 mm Maximum planing cutting depth 4 mm Thicknessing feed speed 7 m/min Planer table dimensions 1660 × 410 mm Thicknessing table dimensions 600 × 408 mm Gross weight 330 kg Machine dimensions (L/W/H) 1640 / 920 / 1000 mm Motor speed 2800 rpm Motor power S1/S6 S1: 4.0 kW / S6: 5.2 kW Power supply 3-phase, 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, CORMAK WK50 Pillar Drill Press – Heavy-Duty Industrial Metal Drilling and Tapping Machine The CORMAK WK50 is a high-performance industrial pillar drill press with tapping function, designed for intensive drilling, reaming, countersinking, hole enlargement, and tapping operations in metal. Thanks to its rigid rectangular body construction, high feed force, and wide range of spindle speeds and torque values, the WK50 industrial drilling machine is suitable for both single-piece production and serial manufacturing, ensuring repeatability, accuracy, and high machining efficiency. Main Advantages of the Machine Large drilling capacity – up to 50 mm in steel and up to 55 mm in cast iron, enabling machining of large-diameter holes. Drilling machine with tapping function – reverse spindle rotation and high spindle torque allow efficient and precise thread cutting. Precise spindle guidance – 250 mm spindle travel and 9 feed settings (from 0.056 to 1.80 mm/rev) allow optimal adjustment of machining parameters. High spindle torque – 35 kgm – enables effective drilling and tapping even in high-strength materials. Rigid rectangular column design – provides excellent stability of the drive system and resistance to dynamic deformation. Cooling system – coolant pump with a capacity of 12 l/min ensures proper thermal conditions in the cutting zone. Intuitive operation and easy maintenance – the machine has been designed for ergonomic use and reliable long-term operation. Design and Technology – High Rigidity for Industrial Applications The CORMAK WK50 pillar drill press is based on a highly rigid construction with a vertically adjustable spindle head featuring 200 mm manual travel. The solid machine body and precision guide system ensure accurate positioning of tools and workpieces. The 12-speed spindle gearbox (31.5–1400 rpm) provides a wide operating range, allowing optimal cutting parameters to be selected for different materials and machining operations. The large 710 × 490 mm worktable makes it easier to mount large and irregularly shaped workpieces, increasing the machine’s versatility in industrial environments. Ndedpfx Aorigc Neb Uob Precision and Working Efficiency High spindle torque and precise feed adjustment ensure excellent repeatability during serial production tasks. The CORMAK WK50 drill press with automatic feed enables semi-automatic drilling and tapping operations, reducing errors caused by manual operation. The integrated cooling system and work lighting improve operator comfort and safety, especially during precision machining and long production cycles. Standard Equipment Cooling system with 12 l/min pump Work light 710 × 490 mm worktable Drill chuck 1–13 mm Morse reduction sleeves – 2 pcs. (for MK5) Technical Specifications Parameter Value Maximum drilling diameter 50 mm (55 mm in cast iron HB=220) Spindle taper MK5 Spindle travel 250 mm Spindle head manual travel 200 mm Maximum feed force 1600 kg Maximum spindle torque 35 kgm Spindle-to-column distance 335 mm Number of spindle speeds 12 Spindle speed range 31.5–1400 rpm Spindle feeds 0.056–1.80 mm/rev (9 settings) Worktable dimensions 710 × 490 mm Spindle-to-table distance 550 mm Main motor power 3 kW Coolant pump capacity 12 l/min Overall dimensions 1300 × 1200 × 2530 mm Weight 1350 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK DC3000 Cyclone Dust Collector – Advanced Sawdust and Dust Extraction System The CORMAK DC3000 is an advanced cyclone dust extraction system designed for intensive dust collection processes in woodworking, furniture manufacturing, and metalworking industries. Thanks to its modern cyclone separator, powerful centrifugal sawdust fan, and dual filtration system, the unit efficiently removes both coarse and fine dust particles from the air. The DC3000 sawdust extractor is equipped with an automatic filter cleaning system, ensuring consistent performance and reduced maintenance requirements. Key advantages Automatic filter cleaning system – maintains constant extraction efficiency and reduces downtime. Cyclone separator – effectively separates larger dust particles before they reach the main filter. High-performance centrifugal fan – provides strong suction with low operating noise. Dual filtration system – suitable for both dry and damp sawdust applications. Compact and mobile design – equipped with a durable metal waste container for convenient operation. Precision sealing system – airtight connections ensure high vacuum performance. Construction and technology The CORMAK DC3000 is equipped with a powerful 3 kW three-phase motor (400 V) operating at 2,800 rpm. The centrifugal fan generates high vacuum pressure, enabling efficient extraction even from multiple suction points. An integrated pressure gauge allows real-time monitoring of filter condition and system performance. The cyclone separator reduces the load on the main filter by removing heavier particles before filtration, extending filter life and improving overall efficiency. Precision and performance The cyclone separation system effectively removes larger contaminants, significantly reducing filter clogging. With an extraction capacity of up to 7,000 m³/h, the DC3000 provides efficient operation in multi-point extraction systems and high-dust environments. The combination of two collection containers and four transport wheels improves functionality, mobility, and ease of operation in industrial environments. Applications The CORMAK DC3000 dust extraction system is suitable for: woodworking plants and sawmills furniture manufacturing and flooring industries workshops processing soft metals building material warehouses with high dust levels Standard equipment Automatic filter shaker system Pressure gauge Dual filtration system (pre-filter and main filter) Metal container under the cyclone separator Transport wheels Ndodswwtz Nopfx Ab Ujb Optional equipment Additional suction outlets with different diameters Pipe distribution systems for workshop-wide extraction networks Protective filter covers Technical specifications Parameter Value Extraction capacity 2,000 – 7,000 m³/h Noise level 75 dB Fan speed 2,800 rpm Suction connections 3 × Ø100 mm / 1 × Ø200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions (L × W × H) 1300 × 1000 × 2200 mm Weight 219 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MM3146 230V Drum Roller Sander for Wood is an efficient, single-unit sanding machine designed for finishing flat surfaces made of solid wood, furniture boards, metal components, and plastics. Thanks to its robust construction, precise guidance system, and large-diameter sanding drum, the machine provides uniform surface finishing with high working efficiency. It is an ideal solution for production facilities, woodworking workshops, and companies involved in renovation and finishing processes. Main advantages of the machine Reinforced construction – a rigid, heavy-duty frame minimizes vibrations and ensures stability even during intensive operation. Precise sanding thickness adjustment – a mechanical height gauge allows accurate setting of the required machining dimension. Precisely balanced sanding drum – made of drawn aluminum, it ensures even contact with the workpiece and effective cooling. Universal application – suitable for removing old paint, varnish, corrosion, as well as smoothing and deburring surfaces. Metal drive coupling – provides durable and reliable transmission of torque from the motor to the sanding drum. Working width up to 920 mm – allows sanding of wide panels using a double-pass method. Construction and technology The CORMAK MM3146 stands out with its solid industrial construction. The 1.5/2.2 kW (S1/S6) main motor, combined with a reinforced 60 W feed drive, provides sufficient power reserve for intensive, long-term operation. The variable feed speed system (0–4 m/min) allows adjustment of the working pace depending on the material type and required surface quality. The sanding belt measuring 2100 × 75 mm drives a high-speed roller (2800 rpm), enabling fast and effective material removal. The aluminum sanding drum cools itself during operation, eliminating the risk of overheating the work surface. The side guide has been additionally reinforced, improving parallel alignment and sanding stability across the entire working width. Precision and working efficiency The CORMAK MM3146 drum sander guarantees repeatable results thanks to its mechanical height adjustment system with a precise scale. The minimum workpiece thickness is 3.5 mm, while the maximum is 100 mm, allowing the processing of both thin panels and solid structural elements. The working width of 460 mm in a single pass (or 920 mm with double guiding) provides production flexibility, even when processing larger batches of components. Standard equipment Precision aluminum sanding drum Metal drive coupling for the sanding drum Working table 460 × 465 mm Conveyor belt 1120 × 450 mm Thickness gauge with precise scale Reinforced side guide Dust extraction port Ø62 mm Technical specifications Parameter Value Motor power S1/S6 1.5/2.2 kW, 230 V Belt speed 2800 rpm (for wood and metal) Sanding belt size 2100 × 75 mm Feed belt size 1120 × 450 mm Ndsdpfx Aew Hb Atsb Ujb Working table dimensions 460 × 465 mm Extraction port diameter Ø62 mm Feed speed 0–4 m/min Minimum material thickness 3.5 mm Maximum working height 100 mm Working width 460 (920) mm Reinforced feed motor 60 W Machine dimensions 880 × 540 × 1230 mm Net/gross weight 134 / 160 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Njdpsxrdhajfx Ab Uodb Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 3900 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Dust Extraction System for Cabinet Sandblasting Machines The dust extraction system for cabinet sandblasting machines is a specialised extraction unit designed to improve visibility, cleanliness, and workplace safety during abrasive blasting operations. Equipped with a built-in 1100 W motor and an efficient filtration system, the unit ensures effective removal of contaminants from the working area. It is an essential component of every sandblasting cabinet, especially when used intensively in industrial environments. Main Advantages of the Machine 1100 W motor – provides high extraction performance while maintaining the unit's compact dimensions. Capacity of 3 m³/min – effectively removes dust and improves visibility inside the cabinet during operation. High-efficiency filter – captures fine dust particles, helping to protect the operator's health and improve the quality of the working environment. Stable construction – designed for operation with large sandblasting cabinets. Compact dimensions – allow easy installation near the cabinet, even where space is limited. Construction and Technology The extractor is equipped with an efficient 230 V/50 Hz electric motor that generates a stable extraction airflow, essential during intensive sandblasting operations. The unit's housing is made of durable materials resistant to industrial conditions. The 310 x 170 mm filter effectively captures even fine dust particles, preventing them from being re-suspended in the air. The 52 mm inlet diameter ensures compatibility with most sandblasting cabinets. Precision and Work Efficiency Thanks to its high-efficiency filtration system, the extractor eliminates excessive dust accumulation inside the cabinet, which directly improves the precision of the abrasive blasting process. Improved visibility allows for more accurate cleaning of components and reduces processing time. Reducing the amount of airborne dust also helps extend the service life of other cabinet components, such as lighting systems and door seals. Applications The unit is recommended for use with sandblasting cabinets featuring a large working area, where significant amounts of dust are generated. It is suitable for repair workshops, metalworking shops, and industrial production facilities where regular sandblasting requires clean air to be maintained. The extractor is compatible with most cabinet sandblasting machine models; however, attention should be paid to the different mounting-hole spacing used on the KDP200, KDP200TOP, and KDP220TOP models. Standard Equipment Njdpfx Aberh E Azj Uedb Integrated 230 V electric motor High-efficiency filtration system Housing with wall-mounting bracket 52 mm diameter inlet Technical Specifications Specification Value Extraction power 1100 W Capacity 3 m³/min Power supply 230 V / 50 Hz Noise level 85 dB Inlet diameter 52 mm Handle length 280 mm Extractor dimensions (height × diameter) 730 × 260 mm Filter dimensions (height × diameter) 310 × 170 mm Weight 9.5 kg

Condition: new, Year of construction: 2026, The professional CORMAK BS912N metal bandsaw is a robust and precise machine designed for cutting tubes, profiles and solid elements. The model allows cutting materials with a diameter of up to 230mm and operation at angles from 0° to 45°. Automatic downfeed of the saw arm, lowering adjustment by means of a hydraulic cylinder, a cooling system and a stable cast iron construction make this machine ideal for metalworking shops, production workshops and craft workshops. CORMAK BS912N metal bandsaw – precise angled metal cutting The CORMAK BS912N metal bandsaw is a professional machine designed for precise cutting of tubes, profiles and solid elements. Its solid construction, automatic tool downfeed and hydraulic adjustment of the saw arm lowering ensure convenient operation, repeatability and high cutting quality. The BS912N model allows cutting of materials with a diameter of up to 230 mm and making angled cuts in the range from 0° to 45°. This makes the machine suitable for metalworking shops, production workshops and anywhere that accuracy, stability and machining speed matter. Main advantages of the machine Automatic tool downfeed increasing convenience and cutting repeatability Hydraulic adjustment of saw arm lowering using a cylinder and an oil flow control valve Cutting at angles from 0° to 45° thanks to the swivelling vice Heavy cast iron vice ensuring stable clamping of the material Blade guides with carbide inserts and bearings affecting cutting accuracy and quality Cooling system supplying coolant to the blade and the cut element Wire brush cleaning the blade preventing the blade from clogging Automatic drive shut-off after completion of the cut by means of a limit switch Construction and technology The material to be cut can be fed manually or by means of any mechanical device. The tool feed is automatic, which makes the operator’s work easier and allows stable, repeatable results to be achieved. The lowering speed of the saw arm is adjusted by means of a hydraulic cylinder. The appropriate speed is obtained thanks to a valve regulating the oil flow between the cylinder chambers. This solution makes it possible to adapt the machine operation to the type of material being processed and the expected cutting precision. The required linear blade speed is obtained by changing the ratio on the belt pulleys between the worm gearbox and the drive motor. In the machine base there is a coolant tank with an electric pump, responsible for effective cooling of the blade and the workpiece. Equipment and functions Automatic tool downfeed Hydraulic adjustment of saw arm lowering Swivelling vice with angle scale Quick vice clamp Nsdpey En E Sofx Ab Usdb Convenient handle for blade tensioning Blade tension indicator Table for selection of blade tooth pitch and cutting speed Cooling system for the blade and cut material Wire brush cleaning chips from the blade Blade guides with carbide inserts and bearings Automatic limit switch after cut completion Emergency stop of the “mushroom safety” type Technical data Motor 230 V, 50 Hz, 1100 W / 400 V, 50 Hz, 1100 W Blade dimensions 2655 x 27 x 0.9 mm Blade speeds 24 / 36 / 49 / 71 m/min Cutting angle range from 0° to +45° Machine package dimensions 1420 x 500 x 1150 mm Weight 151 / 202 kg Angle 0° Ø 229 191 x 305 max. 355 230 x 230 45° Ø 160 230 x 140 155 x 155

Condition: new, Year of construction: 2026, CORMAK PT310 Planer Thicknesser The CORMAK PT310 planer thicknesser is an advanced woodworking machine combining the functions of a surface planer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and solutions designed to improve accuracy and operator comfort. It is a reliable tool for professionals who expect efficiency, durability, and repeatable precision when working with both hard and soft wood. Main advantages of the machine Powerful motor S6: 4.2 kW (S1: 3.0 kW) – one of the most powerful units in its class, ensuring stable performance even under heavy loads. Stable construction with a weight of 250 kg – rigid cast iron tables and additional rubber feet minimize vibration and improve machining accuracy. Quick change between operating modes – fast conversion from surface planer to thickness planer by lifting the tables and repositioning the chip extraction cover. High operating comfort – low noise emission and precise material guidance ensure comfortable and safe operation. Efficient dust extraction system – Ø120 mm extraction connection enables effective chip removal, especially during intensive use. Design and technology The PT310 is built on a massive frame with ground cast iron working tables, ensuring long service life and excellent rigidity. The main control elements, including the thickness planer table height adjustment wheel, are ergonomically positioned on the right side of the machine. The tilting fence with a clear scale allows precise adjustment from 90° to 45°. Thanks to the solid guiding column of the thickness planer table, the machine provides repeatable accuracy across the entire working width. Precision and working efficiency Nedpfx Absvxh Rvj Uedb The Ø75 mm cutter shaft equipped with three HSS knives measuring 310 × 25 × 3 mm rotates at 5500 rpm, allowing perfectly smooth surface finishing. The maximum planing width is 310 mm, while the thicknessing height range is 5–225 mm. The 6 m/min feed speed enables efficient processing of larger workpieces. The maximum cutting depth in surface planing mode reaches 4 mm, significantly reducing material preparation time. Applications Carpentry and furniture workshops – for everyday efficient processing of solid wood and glued panels. Production of structural elements – ideal for leveling and calibrating construction components, stairs, frames, and moldings. Technical schools and training workshops Standard equipment Three HSS knives, dimensions 310 × 25 × 3 mm Cutter head guard Cast iron surface planer tables Ø100 mm dust extraction outlet Feed switch and emergency STOP switch Polish-language operating manual (DTR) CE declaration of conformity Technical specifications Cutter shaft diameter 75 mm Cutter shaft speed 5500 rpm Dust extraction outlet diameter 100 mm Tilting fence angle range 90–45° Number of knives / dimensions 3 / 310 × 25 × 3 mm Maximum surface planing width 310 mm Maximum thickness planing width 308 mm Maximum planing height 5–225 mm Maximum thickness planing cutting depth 2.5 mm Maximum surface planing cutting depth 4 mm Thickness planer feed speed 6 m/min Surface planer table dimensions (L × W) 1300 × 310 mm Gross weight 250 kg Motor speed 2800 rpm Motor power S1: 3.0 kW / S6: 4.2 kW Power supply 400 V, 5-pin socket, 16 A Operating manual (DTR) Included CE declaration Yes

Condition: new, Year of construction: 2026, CKT 560 × 1500 CNC Metal Lathe is a professional industrial solution combining advanced CNC technology with a robust machine structure, designed for production facilities requiring the highest standards of machining quality. This industrial CNC lathe enables a wide range of complex operations, including external and internal turning, spherical turning, threading, drilling, grooving, and contour machining. Key Features Exceptional machining accuracy – maximum swing over bed of 560 mm, swing over cross slide of 340 mm, and a 430 mm wide bed ensure high rigidity and precision during demanding operations. Flexible spindle system – spindle speed range of 100–800 RPM and a 75 mm spindle bore (optional 90 mm) with an A2-11 spindle nose allow machining of a wide variety of materials, from steel to lightweight alloys. Intuitive CNC control – Siemens Sinumerik 808D control system with Polish-language interface and Siemens servo drives provides a dedicated operating mode for conventional lathe users, reducing the learning curve for CNC operation. Rigid construction – with a net weight of 3600 kg and dimensions of 3770 × 1500 × 1900 mm, the machine provides excellent stability when machining workpieces up to 1500 mm in length. Efficient tooling system – an 8-position turret (optional 6-position) with 25 × 25 mm tooling enables fast tool changes and reduces production cycle times. Fast setup and adjustment – allows convenient tool setting, work zero positioning, and corrections without the need to write complete CNC programs, making it ideal for single-piece and small-batch production. Enhanced operator safety – controlled rapid movements and spindle speed limitations enable precise and safe machine operation. Extended component life – automatic lubrication of gears and guideways reduces wear and ensures long-term reliability. Optimized cooling system – maintains thermal stability and protects tools and workpieces during intensive machining. Wide range of applications – suitable for precision turning in mechanical engineering, automotive, and tooling industries, for both serial and small-batch production. Energy-efficient performance – the 11 kW main motor provides high productivity with optimized energy consumption. Integrated machining cycles – supports operations such as facing, taper turning, threading, and drilling by entering basic parameters without requiring detailed G-code knowledge. Advanced automation options – available with hydraulic chuck, hydraulic tailstock, bar feeder, and chip conveyor systems. Machine customization options – available upgrades include Fanuc Oi-TF, Siemens Sinumerik 828D, tool probes, and CAD/CAM software integration. Standard Equipment Siemens Sinumerik 808D CNC control Siemens servo drives Manual 3-jaw chuck 8-position turret Complete set of soft jaws Manual tailstock Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting User manual EC Declaration of Conformity Technical Specifications Specification Value Swing over bed 560 mm Swing over cross slide 340 mm Maximum workpiece length 1500 mm Spindle speed range 100–800 RPM Spindle bore 75 mm (optional 90 mm) Bed width 430 mm Ndjdsi Apf Tspfx Ab Ueb Spindle nose A2-11 Number of tools 8 Tool size 25 × 25 mm Tailstock taper MT5 Maximum tailstock travel 150 mm Main motor power 11 kW Machine dimensions (L × W × H) 3770 × 1500 × 1900 mm Net weight 3600 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) Nedpfeychbasx Ab Ujdb The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, CORMAK LUP7T WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well-suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation system, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7T if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7T wood splitter The CORMAK LUP7T wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7T model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Njdpfxezarp Ns Ab Ujdb Who is the 7-ton wood splitter for? The CORMAK LUP7T is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for use at home, on a farm, or in a small service point. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage compared to stand-mounted versions The CORMAK LUP7T is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover over the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Technical parameters of CORMAK LUP7T: Splitting force: max. 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: mains Length: 950 mm Width: 325 mm Height: 510 mm Warranty: 2 years Stand: not included Standard equipment CORMAK LUP7T hydraulic wood splitter Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Ndjdpfxeycg Ryo Ab Ueb Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK OS-4000S Welding Fume Extractor The CORMAK OS-4000S is an industrial welding fume extractor designed for effective removal of welding fumes, dust, and fine contaminants generated during welding and related operations. The OS4000S features a new, lower-profile housing. The unit operates locally at the workstation, capturing contaminants before they spread throughout the workshop or production hall. This significantly improves working comfort, visibility in the welding area, and helps maintain workplace health and safety standards. Specifications Parameter Value Model OS4000S Power Supply 400 V Power 4.0 kW Airflow Capacity 3000–4000 m³/h Operating Pressure 3050–2600 Pa Filtration Efficiency 99.00% Number of Filter Cartridges 4 pcs Filter Specification Ø325 × 600 mm Filter Material Polyester Filter Cleaning Method Pneumatic, pulse cleaning Dust Container Capacity 50 l Noise Level ≤ 78 dB(A) Dimensions 900 × 900 × 1950 mm Why Choose the OS-4000S? High extraction performance – effective suction of fumes and dust near the welding arc. Large-surface cartridge filtration system – highly efficient separation of fine particles. Automatic pneumatic filter cleaning – stable operation with fewer maintenance interruptions. Dust collection container – fast and convenient emptying without mess. Ndsdpfxey Sgc As Ab Usb Easy operation – user-friendly controls and quick access to consumable components. Effective Filtration and Consistent Suction Power The OS-4000S uses a multi-stage filtration system based on cartridge filters. This allows the unit to efficiently capture fine dust and welding fume particles. Additionally, the pneumatic pulse cleaning system shakes dust off the filter surfaces, which: maintains constant suction efficiency, extends filter service life, reduces performance loss during intensive operation. Comfort and Safety at the Workstation Extracting contaminants directly at the source provides immediate benefits: less smoke in the operator’s working zone, improved weld visibility and more stable working conditions, cleaner workshop environment and reduced dust accumulation on machines and installations. Applications The CORMAK OS-4000S is suitable for: MIG/MAG, TIG, and MMA welding, metalworking and maintenance operations in production facilities, grinding and deburring near the workstation, light cutting and processing operations that generate dust and fumes.

Condition: new, Year of construction: 2026, CORMAK Z5040L Column Drill Press The CORMAK Z5040L column drill press is an industrial metal drilling machine designed for intensive and precise operation in production plants and tool rooms. Equipped with an automatic spindle feed, tapping function, and a rotary tilting cube table, it enables efficient execution of the most demanding drilling and threading operations. This complete industrial drilling machine provides full adjustment flexibility and safe operation. Main advantages of the machine Automatic spindle feed – two feed rates (0.1 mm and 0.2 mm/rev) ensure stable and repeatable operation during deep drilling processes. Rotary tilting cube table – adjustable around the column and tiltable by ±45°, providing access to difficult-to-reach working surfaces at various angles. Tapping function – automatic spindle rotation change (right/left) enables fast and safe threading in steel (M22) and cast iron (M24). Wide spindle speed range – 18 speeds from 75–1450 rpm allow optimal machining parameters depending on the material and tool used. High structural rigidity – achieved through a large-diameter column and a massive base with 18 mm T-slots. Drilling depth indicator – provides precise control of hole depth. Standard cooling system – an independent 75 W pump improves drilling quality and protects tools against overheating. Construction and technology The CORMAK Z5040L column drill press has been designed with high stability, durability, and versatility in mind. The cast iron spindle head and column construction provide excellent vibration resistance, resulting in higher machining accuracy. The main worktable, measuring 560 × 520 mm, and the side table measuring 560 × 250 mm provide a large working area with the possibility of mounting various types of fixtures and machine vices. The large spindle stroke of 185 mm allows deep drilling without interrupting the machining process. Precision and work efficiency The CORMAK Z5040L drill press with automatic feed is designed for continuous operation while maintaining maximum accuracy. Thanks to the 18-speed gearbox, two automatic feed rates, and extensive angular adjustment options of the table, the operator can precisely adapt working parameters to the requirements of a specific workpiece. High-quality LED lighting enables accurate tool positioning even during complex machining operations. Standard equipment Angular cube table with T-slots Side table with mounting slots Cooling system with pump Automatic spindle feed LED work light Drilling depth indicator Technical specifications Parameter Value Maximum drilling diameter 40 mm Ndedpfxeridxxo Ab Ujb Maximum tapping diameter (steel/cast iron) M22 / M24 Spindle stroke 185 mm Spindle taper MK4 Automatic feed range 0.1 / 0.2 mm/rev Spindle speed range 75–1450 rpm Number of speeds 18 Spindle-to-column distance 350 mm Maximum spindle-to-table distance 770 mm Maximum spindle-to-base distance 1215 mm Main table dimensions 560 × 520 mm Side table dimensions 560 × 250 mm Base dimensions 730 × 500 mm T-slot width 18 mm Motor power 1.5 kW Coolant pump power 75 W Overall dimensions 2230 × 560 × 850 mm Weight 510 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BA1310 – Mobile Electric Pallet Strapping Machine The CORMAK BA1310 is a mobile electric strapping machine designed for securing cartons, multipacks, and other products arranged on pallets. The machine streamlines the preparation of loads for transportation or storage while reducing the number of manual operations performed by the operator. The retractable guide, which slides underneath the pallet, makes it easier to pass the strap beneath the load, reducing the need to bend down or reach into difficult-to-access areas. After passing the strap under the pallet, the operator guides it around the load and places it into the tensioning and heat-sealing mechanism. The built-in strap tensioner allows tension to be adjusted from 0–70 kg, making it possible to adapt the strapping force to the type of goods being secured. More delicate cartons can be strapped with lower tension, while heavier multipacks can be secured with greater force. The ends of the PP strap are joined by heat sealing, eliminating the need for additional buckles or clips. This reduces the number of packaging materials required and streamlines the preparation of subsequent loads for shipment. Key Benefits of the CORMAK BA1310 More efficient securing of palletized goods, easier routing of the strap underneath the pallet, reduced need to bend down or reach underneath the load, adjustable strap tension to suit different types of packaging, Ndjdpszwfpvefx Ab Ueb more stable preparation of goods for transportation and storage, heat sealing without additional buckles or clips, compatibility with PP straps 9–16 mm wide, easy movement of the machine directly to subsequent pallets, designed for regular pallet strapping operations. Easier Strap Routing Under the Pallet The retractable guide makes it easier to feed the strap underneath the pallet and bring it out on the opposite side of the load. This solution reduces strapping preparation time and improves workplace ergonomics, particularly when regularly securing a large number of pallets. The guide helps maintain a smooth workflow without the need to manually reach into difficult-to-access areas beneath the load. Adjustable Strapping Force The 0–70 kg tension adjustment range allows the strapping force to be matched to the type of product being secured. Lower tension reduces the risk of deforming delicate cartons, while higher tension helps provide more stable securing of heavier multipacks. Correct tension adjustment improves strapping consistency and helps prevent goods from shifting during handling, storage, and transportation. Durable Connection Without Additional Buckles Heat sealing joins the ends of the PP strap without the use of metal or plastic buckles. This reduces the number of consumables required for packaging and simplifies load preparation for shipment. Transport wheels allow the machine to be moved directly to the next pallet. This eliminates the need for a dedicated strapping station or for transporting every load to the machine. Technical Specifications Technical specification Value Machine type Semi-automatic pallet strapping machine Strap type PP Strap width 9–16 mm Strap tension 0–70 kg Strap joining method Heat sealing Strap routing Retractable guide inserted underneath the pallet Table height 524 mm Mobility Transport wheels Power 700 W Dimensions 867 × 662 × 1523 mm Weight 150 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DG32MD is a professional spiral drill sharpener designed for intensive operation in industrial and workshop environments. The machine enables precise sharpening of HSS and cobalt drills in the diameter range of ø5–ø32 mm, making it a highly versatile tool for production plants, tool rooms, and service facilities. Thanks to the use of a powerful motor, CBN grinding wheels, and an additional drill web thinning socket, the DG32MD model ensures not only high accuracy but also complete regeneration capability for cutting tools. Main advantages of the machine Wide drill diameter range: from ø5 to ø32 mm – ideal for sharpening both small and large cutting tools. Adjustable point angle: 90°–135°, allowing sharpening of most types of twist drills. Two clamping systems (ER20 and ER40): provide secure and rigid drill mounting across the entire diameter range. CBN (borazon) grinding wheels included: designed for sharpening high-speed steel drills, offering high durability and precision. Stable and compact construction: with a weight of 32 kg, it ensures accuracy and vibration-free operation. Complete equipment set: includes collets, holders, and tools – ready for operation without the need for additional purchases. Design and technology Ndsdsvu Ac Eopfx Ab Usb The CORMAK DG32MD has been designed for intensive use and long service life. The machine features a robust housing resistant to vibrations and a 250 W motor with a speed of 4400 rpm, ensuring smooth operation even when sharpening larger diameter drills. The quick-change ER20 and ER40 holder system allows easy switching between different diameter ranges, while the precise tool guidance eliminates the risk of operator errors. Precision and work efficiency High-quality components ensure that the CORMAK DG32MD drill sharpener provides repeatable and precise sharpening results, even during continuous production work. Applications The CORMAK DG32MD model is suitable for: tool rooms and production plants where fast drill regeneration is required, repair workshops and maintenance departments, service centres, technical and training facilities requiring high sharpening accuracy and repeatability. Standard equipment 2 × CBN grinding wheels – for high-speed steel drills 12 × ER20 collets: ø5–ø14 mm 18 × ER40 collets: ø15–ø32 mm 1 × ER20 clamping holder 1 × ER40 clamping holder Technical specifications Parameter Value Drill diameter range ø5–32 mm Point angle 90°–135° Power 250 W / 230 V Motor speed 4400 rpm Weight approx. 32 kg Dimensions 400 × 260 × 300 mm

Condition: new, Year of construction: 2026, The CORMAK PT265T Planer-Thicknesser is a professional machine designed for intensive and precise machining of solid wood and wood-based materials. The new version features an innovative combined table system that significantly increases work efficiency and eliminates setup errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable tool for carpenters, craftsmen, and production workshops. Key Advantages New combined table system – constant calibration of the infeed and outfeed tables eliminates errors and improves precision. Stable cast-iron construction – 170 kg machine weight minimizes vibrations and enhances safety. Total motor power S6: 2.6 kW – ensures smooth and efficient processing of hardwoods. Unique Benefit: Feed Rollers in the Thicknesser – specially designed roller extensions integrated into the thicknesser table support long and heavy materials, making feeding and receiving easier while improving surface finish quality. Easy conversion from jointer to thicknesser – quick switching between modes reduces operating time. Three HSS knives – precise cutting and high-quality surface finish. 265 mm working width jointer – large working area allows machining of wide workpieces. Construction and Technology The CORMARK PT265T is a modern wood thicknesser built on a robust, reinforced structure with cast-iron components. The worktables are ground and properly balanced, ensuring repeatability and accuracy. The new table system enables synchronized height adjustment—once set, the table level does not require recalibration when changing the planing thickness. The centrally positioned thicknesser table on a column ensures even material feed without deviation. Rubber feet further reduce vibrations, improving component durability and machining quality. Performance and Precision With a 2.6 kW (S6) motor, the machine delivers high efficiency while maintaining stable operating parameters, even when machining hardwoods. The cutterhead with a 75 mm diameter, equipped with three knives and running at 4000 rpm, ensures a perfectly smooth surface finish. A precise graduated scale allows accurate table height adjustment. The aluminum tilting fence (700 × 150 mm) with an adjustable angle range of 90–45° enables precise jointing at various angles. Standard Equipment Cutterhead with three HSS knives Aluminum fence 700 × 150 mm Graduated handwheel for table height adjustment Cutterhead guard Built-in dust extraction port Ø100 mm Anti-vibration rubber feet Technical Specifications Ndjdey El R Eepfx Ab Uob Cutterhead diameter: 75 mm Cutterhead speed: 4000 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives: 3 Cutterhead length: 262 mm Knife dimensions: 250 × 25 × 3 mm Max. jointer width: 265 mm Max. thicknesser width: 265 mm Max. planing height: 180 mm Max. thicknesser cutting depth: 3 mm Max. jointer cutting depth: 2.5 mm Feed speed (thicknesser): 6 m/min Fence dimensions: 700 × 150 mm Machine dimensions (L × W × H): 1080 × 269 × 1000 mm Weight: 170 kg Total motor power: S6: 2.6 kW Power supply: 400V

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230DBK Dust Collector is a professional dust extraction unit designed for the efficient removal of sawdust, wood chips, and dust generated during the machining of wood, metal, and plastics. With its compact design, high suction pressure, and 1,000 m³/h airflow capacity, it is an ideal solution for woodworking shops, technical schools, and craft workshops. Its lightweight construction, quiet operation, and excellent mobility make it a practical and efficient dust collector for users seeking reliable performance in a compact package. Key Features 1,000 m³/h airflow capacity – efficiently removes sawdust, chips, and dust from a single workstation. 0.75 kW motor powered by 230 V – operates from a standard mains outlet without requiring electrical modifications. Ø230 mm metal impeller – dynamically balanced for smooth, quiet operation and long service life. Vacuum pressure up to 1,030 Pa – delivers powerful suction, even when handling heavy or damp wood chips. Adjustable Ø100 mm extraction inlet – compatible with a wide range of woodworking and industrial machines. Mobile wheeled base – allows the unit to be moved easily between workstations. 56 L collection bag – reduces the frequency of emptying and supports uninterrupted operation. Ndodpfxsvu Apre Ab Usb Low noise level (approx. 70 dB) – provides comfortable operation in enclosed workshop environments. Construction and Technology The CORMAK FM230DBK woodworking dust collector is built around a proven impeller-based extraction system. Its 230 mm dynamically balanced metal fan operates at high speed to generate stable suction, ensuring efficient removal of dust and chips directly from woodworking machinery. The 56 L textile collection bag is mounted on a sturdy steel frame for quick removal and replacement, helping maintain continuous productivity. The entire unit is installed on a mobile base with four wheels, making it easy to reposition even in confined workshop spaces. The adjustable Ø100 mm extraction inlet allows simple connection to a variety of machines with different dust extraction configurations. Performance and Efficiency The FM230DBK combines powerful extraction performance with quiet, energy-efficient operation. Its large-diameter metal impeller and high static pressure significantly reduce the risk of clogging, while the 1,030 Pa vacuum pressure effectively captures heavier particles and larger wood chips. Thanks to its relatively low operating noise, the unit is well suited for enclosed workshops where maintaining a comfortable working environment is important. Standard Equipment Mobile wheeled base Heavy-duty steel support frame Flexible extraction hose with nozzle 56 L textile collection bag Adjustable Ø100 mm extraction inlet Optional Equipment High-efficiency filter bags Multi-point extraction manifolds Antistatic Ø100 mm flexible hoses Reducers and adapters for non-standard machine connections Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,030 Pa Impeller diameter Ø230 mm Extraction inlet diameter Ø100 mm Collection bag capacity 56 L Noise level Approx. 70 dB Overall dimensions 1,100 × 500 × 1,300 mm Weight 21 kg

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine The CORMAK RGE36PWx1700 electric tapping machine is an advanced thread-cutting device designed for both large production facilities and smaller workshops. This tapping machine significantly reduces thread machining time, increasing work efficiency and improving the precision of manufactured threads. It has been developed to provide high reliability, ease of operation, and versatility across a wide range of industrial applications. Main advantages of the CORMAK RGE36PWx1700 Electric Tapping Machine High precision and fast tapping: Thanks to the powerful servo drive and tapping arm, the machine ensures accurate thread cutting in a short time, which is essential for serial production. Easy operation: The machine is equipped with a touchscreen control panel available in Polish and English, allowing simple adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth. High flexibility: The tapping arm enables thread cutting at various angles, while the rotating motor assembly allows precise positioning of the machine for different applications. Efficient cooling system: The micro-spray lubrication system cools the tools with minimal lubricant consumption, extending tool life and reducing material waste. Comprehensive equipment: The tapping machine includes a chip blow-off system, improving visibility of the workpiece and increasing overall work efficiency. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction designed for efficient and precise tapping in various industrial environments. The machine is powered by a servo drive, ensuring reliable operation and accurate control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can perform threading in a wide range of materials, including steel, stainless steel, aluminium, and non-ferrous metals. The tapping arm is equipped with a quick-change tool holder, allowing fast and convenient installation of taps. Adjustable overload clutches integrated into the tap holders provide additional tool protection during operation. This system also allows precise adjustment of torque settings, ensuring accurate and repeatable tapping results. Nodpfjycdhpsx Ab Usdb Standard Equipment of the CORMAK RGE36PWx1700 Tapping Machine Touchscreen control panel: Enables easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE36PWx1700 Tapping Machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Maximum arm reach 1700 mm Maximum spindle speed 125 rpm Included in the set: Tap holders covering the range from M5 to M36. The machine is supplied without a workbench, vice, and taps.

Condition: new, Year of construction: 2026, CORMAK OS3500 is a mobile welding fume extractor designed for effective removal of welding fumes and exhaust gases directly at the source. The unit combines high suction power with a large airflow rate, while the sound-insulated fan chamber ensures quiet, smooth operation. Additional advantages include an integrated pneumatic filter cleaning system, airflow regulation at the suction inlet, and a robust, industrial-grade construction. Automatic Filter Cleaning – Consistent Performance The CORMAK OS3500 is designed with user convenience and long-term performance stability in mind. For this reason, it is equipped with an automatic pneumatic filter cleaning system. In practice, this means that accumulated contaminants are regularly knocked off the filter without the need for frequent manual intervention. The result is twofold: first, the extractor maintains a constant level of efficiency; second, service downtime and operating costs are reduced. In a production environment, this is crucial—any unplanned interruption or loss of suction affects workflow and the quality of working conditions at the workstation. Adjustable Suction Power Tailored to the Task Another key advantage is airflow regulation at the suction inlet. This solution allows the extraction force to be adjusted to actual working needs: different for short spot welds, different for long continuous welding, and different again for grinding operations. Regulation at the inlet enables quick, operator-friendly adjustment without time-consuming configuration changes. This makes it easier to maintain a balance between effective extraction and operator comfort (for example, when working with smaller parts where excessive suction could hinder handling). Robust Construction and Mobility The OS3500 is designed for everyday use, which is why great emphasis has been placed on build quality. Its solid construction performs reliably in workshop and industrial environments—where equipment is frequently moved, operates for many hours a day, and must withstand intensive use. Its mobility allows the extractor to be used at multiple workstations without investing in a permanent installation throughout the entire hall. This is a practical solution for both companies with several workstations and those that frequently change layouts or carry out varied jobs. Wide Range of Applications In practice, the OS3500 is suitable wherever air contaminants are generated: welding (MIG/MAG, TIG), metalworking, grinding, and other processes producing dust and fumes. Its purpose is to improve working conditions by reducing pollutants in the operator’s breathing zone. This solution positively impacts employee health, work comfort, and the perception of the facility as a modern and safe workplace. Technical Specifications Model Airflow (m³/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 *The power cable and plug are not included due to varying connection infrastructures and customer requirements. Ndjdpjygt Utofx Ab Usb

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools Ndodpfsud H H Uox Ab Usb drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual

Condition: new, Year of construction: 2026, MDC750 Metal Dust and Chip Extractor – 230V is a high-performance extraction unit designed for metalworking stations where effective removal of contaminants such as metal chips, filings, and dust is essential. Thanks to its compact design, durable motor, and high extraction efficiency, it is a reliable solution for professional metalworking workshops, production plants, and workstations equipped with belt, bench, and disc grinders. This metal extraction system provides a clean and safe working environment while maintaining stable extraction performance. Main advantages of the machine High extraction efficiency – airflow capacity up to 1800 m³/h without a bag, ensuring effective removal of even fine metal dust and filings. Compact design – a stable, well-balanced housing allows operation in limited workshop spaces. Quick access to the collection container – simplifies regular emptying and reduces downtime. Easy filter replacement – minimizes maintenance time. Suitable for various machines – an ideal metal chip extractor and grinder dust extraction system for small and medium-sized workshops. Design and technology The MDC750 has been designed for intensive operation in industrial environments. The construction is based on a durable steel housing and an efficient filtration system that effectively separates metal dust and chips. The suction unit is powered by a 0.75 kW motor, providing appropriate airflow parameters. The 350 mm diameter impeller generates stable suction pressure, allowing efficient removal of even heavier metal particles. The machine is equipped with a 1 × 100 mm suction port, making it compatible with the most common metalworking stations. The large collection container ensures long operating periods without frequent emptying. Precision and work efficiency The applied design solutions ensure constant performance during both metal chip extraction and fine dust removal. The extraction capacity of 1520 m³/h with a bag allows efficient operation of both single and multiple workstations. The compact dimensions make the unit easy to relocate and integrate into existing workshop layouts. Nodpfxoztn Sfo Ab Uedb Applications The MDC750 metal extractor is designed for professional applications, especially: bench, belt, and disc grinding stations, small and medium-sized metalworking workshops, metal component preparation and finishing stations, processes requiring effective removal of metal chips and dust. Standard equipment Basic filter Chip and metal filing collection container 100 mm suction port Set of mounting components and consumable elements Technical specifications Parameter Value Motor power 0.75 kW Voltage 230V / 50 Hz Suction ports 1 × 100 mm Extraction capacity without bag 1800 m³/h Extraction capacity with bag 1520 m³/h Impeller diameter 350 mm Dimensions 870 × 560 × 1170 mm Weight 31 kg

Condition: new, Year of construction: 2026, CORMAK VP3000 Gluing Press The CORMAK VP3000 is an industrial hydraulic gluing press designed for precise bonding of solid wood and wood-based components. Equipped with six fully adjustable hydraulic cylinders with high pressing force, the machine ensures uniform pressure distribution and repeatable gluing results across the entire working surface. Thanks to its robust construction and advanced hydraulic system, the CORMAK VP3000 is perfectly suited for both individual production and serial manufacturing. Main advantages of the machine 6 hydraulic cylinders – each with a pressing force of 2000 kg, enabling uniform bonding of large and demanding components. Full pressure adjustment – allows precise adjustment of the clamping force according to the type and thickness of the material. Hydraulic valves with locking function – maintain constant pressure throughout the entire working cycle, ensuring reliable and consistent gluing results. Pressure gauge – enables continuous monitoring and accurate setting of operating parameters. Easy adjustment of pressing units – quick positioning of the clamping elements saves time and increases work efficiency. Steel construction – provides high stability and resistance to deformation during long-term operation. Design and technology The CORMAK VP3000 press has been designed for intensive use in industrial environments. The rigid frame made of steel profiles provides a stable base for six hydraulic pressing units. Each unit can be adjusted independently and positioned according to the operator’s requirements. The minimum distance between pressing units is 240 mm, allowing work with narrow and short components. Thanks to locking valves and an integrated pressure gauge, the operator has full control over the entire gluing process, including pressing force and pressure distribution. This solution is particularly important in factories producing glued panels, countertops, and furniture components, where connection quality and stability are essential. Precision and working efficiency One of the key advantages of the VP3000 model is its excellent repeatability – both in terms of pressing force and the accuracy of glued joints. The gluing press provides even pressure distribution over the entire working area, eliminating the risk of gaps, voids, or improperly bonded sections. The machine is simple and quick to operate and does not require extensive operator training. This allows faster implementation into production environments and improves overall manufacturing efficiency. Applications The hydraulic CORMAK VP3000 press is ideal for: gluing solid wood and laminated panels, production of furniture and structural glued panels, manufacturing worktops and cabinet fronts, bonding frame and staircase components, professional woodworking workshops and serial production facilities. Standard equipment 6 hydraulic cylinders with a pressing force of 2000 kg each, hydraulic pressure gauge, working pressure locking system, adjustable pressing units, robust steel construction. Technical specifications Parameter Specification Total height 2040 mm Total width 3000 mm Maximum clamping height 1550 mm Minimum distance between pressing units 240 mm Hole distance from pressing unit 50 mm Nsdpfswcy U Tox Ab Usdb Working pressure 6 × 2000 kg External dimensions 3030 × 450 × 660 mm Total weight 260 kg

Condition: new, Year of construction: 2026, LUFT 700 VSD+PM COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT 700 VSD+PM COMPACT screw compressor with an integrated refrigerated compressed air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 VSD+PM COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 VSD+PM COMPACT oil-injected screw compressor with refrigerated air dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Nodpfx Aoybvkaob Usdb Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Output at 0–6 bar Average 690 l/min Output at 6 bar 690 l/min Output at 8 bar 650 l/min Output at 10 bar 650 l/min Outlet connection diameter (G) 1/2" Dimensions 1350 × 600 × 850 mm Weight 200 kg