Used D Piza Spot Welding Gun for sale (51,542)

Condition: ready for operation (used), Year of construction: 2025, number of axes: 7, This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details. Gjdszic Eljpfx Ab Tjbr - Technology: Steel Transfer Technology / Pulse MIG/MAG- Cobot / Robot Brand: Universal Robots- Cobot / Robot Model: UR10e- Cobot Year of Manufacture: 2025- Welding Table Brand: Siegmund (Extreme 8.7 series, perforated grid pattern)- Extraction Unit Brand/Model: Fumator Absaugtechnik / Minivac 200D- Extraction Unit Controls: Start, Stop, Filter Reset, Suction Power Regulation- Included Documentation: German User Manual (UR10e) and Heidenbluth documentation binders- System Configuration: Robot mounted on a linear 7th-axis track system running alongside the welding table- Additional Equipment: Welding torch, hose packages, integrated cable carrier chain (energy chain), control cabinet with main switch, teach pendant, shielding gas cylinder rack

Condition: ready for operation (used), Year of construction: 2004, number of axes: 6, Welding robot manufactured in 2004. This ABB IRB 2400L Welding Cell features a robust design with a positioner model ABB IRB 500R and includes Fronius TPS 4000 welding equipment. It comes equipped with essential safety features such as a light curtain and safety fencing. If you are looking to get high-quality welding capabilities, consider the ABB IRB 2400L Welding Cell we have for sale. Contact us for further details. Gjdpfx Abjzhmrye Tebr - Industrial Robot Model: ABB IRB 2400L- Positioner Model: ABB IRB 500R- Welding Equipment: Fronius TPS 4000- Supply Voltage: 3x400V/PE/N- Cable Cross-section: 5 x 16 mm²- Fuse Protection: 63 A delayed- Compressed Air Requirements: 6 bar, G1/2"- Robot Control Cabinet: Included- Machine Sequence Control Cabinet: Included- Robot Base Height: 800 mm- Safety Equipment: Light curtain, safety fencing, glare protection partition wall, service door (monitored by ABB), rear access protection (mechanical, h=1100mm)- Maintenance Units: Torch cleaning system, TCP Calibration unit- Control Stations: Main start panel, Pre-Reset button- Footprint Dimensions: Approx. 8025 mm (length) x 5500 mm (width)- Center-to-center distance: 2000 mm x 1200 mm turning circle- Load capacity: 500 kg per side of the table / Maximum load difference: 350 kg- machine hours: 68.107h

Condition: ready for operation (used), Year of construction: 2012, number of axes: 10, Welding robot manufactured in 2012. This CLOOS C50 welding cell features a QRC 350 robot model and includes a Qineo Pulse 450 welding power source. The system is equipped with a linear track axis configuration, mechanical torch cleaning station, and dual-station components. It also has protective safety enclosure fencing and rotatable workpiece positioners. If you are looking to get high-quality welding capabilities, consider the CLOOS C50 welding cell we have for sale. Contact us for further details. Gbsdezg Ht Iopfx Ab Tor - Robot Model: QRC 350 (girOX QRC 350)- Control Version: QC6- Welding Power Source: Qineo Pulse 450 (CAN)- Power Supply: 400 V / AC, 3-Phase, 50 Hz- Connected Load: 12 kVA (System Sheet specifies 45 kVA max system load capability)- Back-up Fuse Required: 25 A (System Circuitry specifies max 63 A)- Control Cabinet Dimensions: 800 mm x 1900 mm x 600 mm- Control Cabinet Weight: 300 kg- Peripheral Components Included:* Linear track axis configuration* Mechanical torch cleaning station* Dual-station components (Station 1 & Station 2 Manax operating pendants)* Dual safety light curtains (Leuze MLD310 / 0-8 Meter)* Protective safety enclosure fencing with automated swing doors* Rotatable/tiltable workpiece positioners (Positioner 1 Axis 8/9 & Positioner 2 Axis 10/11)* Grounding cable assembly: 95 mm²* Potential equalization wiring: 50 mm²- Pneumatic Requirements: Compressed air supply approx. 6 bar, integrated regulator set to 5.5 bar

Condition: new, functionality: fully functional, carefree package for your welding automation. Whether MIG-MAG or TIG. Would you like to automate your welding production with a cobot to master your challenges? Then the Lorch Cobot Welding Solutions are just right for you! The perfectly coordinated package combines - high-quality robot technology from the cobot market leader Universal - innovative welding technology from Lorch - intuitive Lorch Cobotronic operating software - and a comprehensive range of services with the best professional support. This makes the Lorch Cobot Welding Solutions a truly all-inclusive package - available for highly efficient MIG-MAG applications as well as for highly demanding TIG welding tasks. THE COBOT: EASY TO INTEGRATE INTO YOUR WORK PROCESSES. Thanks to lightweight construction technology and integrated safety solutions, cobots can be used in direct interaction with humans. With the Lorch Cobot Welding Solutions, you get a first-class collaborative welding robot with a generous reach, sufficient payload, low-maintenance engineering and sophisticated technology. That's what's inside: SIMPLE OPERATION. Thanks to the touch display and intuitive user interface, the Cobot becomes a self-explanatory automation tool for your employees. HIGH PRODUCTIVITY. The basics of cobot welding are quickly understood - a two-day training course teaches everything about commissioning, operation and welding functions. SIMPLE PROGRAMMING. With the free-drive function, the cobot is shown by hand where it should weld - including intermediate waypoints and sections. UNIQUE SOFTWARE FOR MAXIMUM CONVENIENCE AND EFFICIENCY. Lorch Cobotronic makes the difference. What sets Lorch Cobot Welding Solutions apart from other cobot solutions is the optimized software. It has been perfectly adapted to the welding technology by our experienced welding experts - to increase the efficiency of your production through maximum user-friendliness and intuitive handling. The multi-talented Cobot UR10e. - 1,300 mm working radius - 12.5 kg payload - Very small footprint - short amortization time - Numerous plug & play accessories - Power source: Lorch S5 RoboMIG XT or Lorch V30 RoboTIG AC/DC Spot repetition accuracy: 0.05 mm Degrees of freedom: 6 +/- Joint rotation: 360 Mains voltage: 230 V OPTIONAL: THE PERFECT ADDITION: Gbsdporuml Ssfx Ab Tjr The Cobot Turn 100 A rotary tilting table always ensures the optimum welding position during cobot welding. The exact positioning can be specified for each weld seam in the program sequence. This leads to an increase in quality, a gain in productivity, more flexibility and saves valuable time - even for demanding welding tasks and circumferential seams. MORE WORKING SPACE AND MAXIMUM FREEDOM: The Cobot Move linear axis is THE addition to further increase the working space of the cobot. The Cobot remains highly precise - this is ensured by the high-quality ball screw drive installed in the linear axis Move, so that the welding quality remains constant across the entire working area. the autopilot for cobot welding: Whereas with conventional programming, all paths must first be specified and then followed by the Cobot, the Cobot SeamPilot finds its own way.

Condition: ready for operation (used), Delta Elektronika SM 15-200 D power supply, used, in good condition, 100% functional, delivery contents as per photos Gjdpsx Eq Hfsfx Ab Tjbr

Condition: ready for operation (used), Bosch VMA 70 CR 001-D supply module, 1070070783-507, serial number: 003253676, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gbedjk Hd I Eepfx Ab Tjr

Condition: ready for operation (used), Siemens 6EW1861-3AC power supply, version E, SN: Q6/1168825, used, in good condition, 100% functional, delivery as per photos. Gbedpfx Abjx Euq Us Tjr

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. Gbjdpfx Abeu Nf Nze Tjr 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: ready for operation (used), Year of construction: 2012, number of axes: 6, This 6-axis PANASONIC TA-1800 robot welding cell was manufactured in 2012. It features a maximum reach of 1796 mm, providing flexibility for various welding applications. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800 robot welding cell we have for sale. Contact us for further details. • Robot max distance 1796mm Gbjdpfx Abozatido Tsr • Robot min distance 472mm

Condition: like new (used), Year of construction: 2018, Set for robotic plasma welding .( Robot not included - without robot ) Shipping to EU countries is our responsibility and the shipping cost is free. Gbederfuc Hspfx Ab Tor

Condition: like new (used), Year of construction: 2005, functionality: fully functional, load capacity: 210 kg, arm reach: 2,700 mm, Model: KR150 L130 Condition: Refurbished with 1 year of warranty Welding Machine: NEW Megmeet Welding Machine FK4000-R + Arc Welding Gun Year: 2005 Controller Cabinet: KRC2 ed05 Gedpfsq Dp Aaex Ab Tobr Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant + Arc Welding Set Not Included: 7th Axis and 7th Drive is not included in the price but can be offered with extra pricing, engineering consultancy As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific welding needs.

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Gbedevtqacepfx Ab Tsr Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. Gedpfxowu Tu Ds Ab Tebr - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Gedjwu Dcxspfx Ab Tobr Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: used, ISAM ESAB submerged arc welding system for cylinder coating No. 01 ESAB submerged arc wire welding systems No. 01 ESAB welding sources mod LAF 1250 DC (output 40 – 1250 A – NOMINAL POWER 1250 A/44V/100%) Nr 01 Command pulpit No. 01 positioned for rollers with a diameter of approximately 400 x approximately 4000 mm Gjdpfx Abjtq Ar Ts Tjbr Sand supply system for submerged arc welding Matr 208202

Condition: as good as new (ex-display), Fronius TPS 2700 Pulse Device Ready to Weld ---> Scope of delivery: ➤Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤Fronius hose package with display on the torch (arc, amperage jobs, etc. adjustable from the torch) ➤Ground cable 3-4m ➤Pressure regulator with new blade ➤Gas hose ➤15kg spool adapter ►►► Perfect for mobile use Gbodpfjvl D Idox Ab Ter This device is perfect for quick and mobile use. Quick to fit in the car and easy to take anywhere - yet no loss of welding quality. Also suitable for stationary use, of course. Questions: ----- How old is the machine? Our customers usually retire their devices between 3-5 years old. Sometimes more, sometimes less. What is the condition, and does the device even work properly? Yes! Everything works as it should! We disassemble, clean, replace wear parts, reassemble, and test all devices. The devices are clean; we don't have any that look completely finished! They're in great condition! Only minimal signs of wear. All pictures are original photos of our devices. They're sample images. We don't have any displays with burn holes. Can I negotiate the price with you? If you buy multiple devices, we can discuss the price. Is shipping possible? Yes, it's possible. We pack the device on a pallet and ship it insured via our shipping company. Can I view the devices somewhere? We have an online store; you can come by to pick up a device, and of course, you can also test it with us before paying. We don't have regular business hours. Everything works by appointment. All devices are assembled according to customer specifications and delivered after payment—that's our standard procedure. Do you offer a warranty? No, we don't offer a warranty. We sell like-new, used, affordable professional welding equipment, usually for 1/4 to 1/2 the new price. For the difference compared to a new device, you can buy two more from us, or you can use the savings to maintain this or several devices for many years. For example, the Fronius TPS 2700, as advertised here, costs around €8,500 new. We offer it for less than 1/3 of the new price. All prices are starting from prices; you can configure the devices with us. ...

Condition: good (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 790 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 2,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 2kW – Top Technology for Efficient Sheet Metal Welding Demonstration Unit – Excellent Condition Discover the smart and high-performance solution for precise laser welding: the Airtech handheld laser welding system with 2,000 watts of power! Perfectly suited for demanding sheet metal fabrication – efficient, safe, and highly versatile. Highlights and Features: - Power output: 2,000 watts for superior weld quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ideally designed for ergonomic operation - Robust housing and intelligent internal structure for maximum durability - Touchscreen display for intuitive operation - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, and protection against operating errors - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Gjdpon Sl Dbofx Ab Tebr Your Benefits - Work safely thanks to comprehensive protection mechanisms and alarm systems - Flexible applications, including automatic wire feed and robot integration - Low operating costs and easy maintenance due to well-designed engineering and long-life components For more information or consultation, the Airtech team will be happy to assist you!

Condition: ready for operation (used), Refurbished - 2008 UV - full or spot Gbjdpfxoxhfwuj Ab Tsr TG Color system

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, The innovative flash butt welding machine for bandsaw and bimetal blades is developed entirely by our engineering department. It guarantees perfect welds and precise repeatability of the process. User friendly touch screen display from Schneider Electric that allows you to operate the machine effortlessly. The welding process is fully automatic, with the capability to adjust the electric current in 6 stages. The machine also allows for stepless regulation of electric current during annealing and pyrometric control throughout the welding process. The FBM10 is extremely easy to set up and cost-effective to maintain. Power supply voltage 400V Rated transformer capacity at 50% duty cycle 5kVA Frequency of electrical current 50HZ Clamping of the band saw blade Manual or Hydraulic clamping /Optional FBM 10.02/ Gbedpfx Aexhf Dzob Tor Annealing Manual or Automatic, with pyrometric control /Optional/ Menu language Bg / En / Possibility for welding: - band saw blades for wood mm 6÷60 - Bi-metal band saw blades mm 6÷54 - stainless steel band saw blades mm 6÷40 - band saw blades without teeth mm 6÷50 Weight: 197kg Dimensions: (length х width х height) mm 910 х 640 х 530

Condition: used, Year of construction: 2003, functionality: unexamined, ABB IRB 1400 M2000 Robotic Welding Cell – Suitable for Parts or Refurbishment – Ireland Location: Ireland Condition: Used Power: 400V, 3 Phase Gbsdeymd E Nepfx Ab Tsr Complete ABB robotic welding cell featuring an ABB IRB 1400 M2000 6-axis industrial robot with controller, teach pendant, dual-station welding fixture and full safety enclosure. Originally configured as a production robotic welding system (Plant Ref: XRWO11). This system is suitable for refurbishment, retrofit, or breaking for parts and spares. Can be sold complete or dismantled and sold separately. Included in Sale: • ABB IRB 1400 M2000 6-Axis Robot • ABB S4C+ Controller Cabinet (400V 3-Phase) • ABB Teach Pendant • Dual-Station Welding Fixture / Positioner • Robot Pedestal Base • Full Steel Safety Enclosure / Welding Booth Robot Specifications: Model: ABB IRB 1400 M2000 Axes: 6 Reach: Approx. 1.44m Payload: 5–6 kg Repeatability: ±0.05 mm Manufactured in Sweden System is complete as seen in photos. Industrial used condition. Operational status not confirmed. Ideal for buyers looking for spare parts including robot arm, controller, drives, teach pendant, servo motors, or welding fixtures. Components can be removed and sold individually if required. Forklift loading available. Inspection welcome by appointment. Asking Price: €5000+ VAT (or nearest offer) Enquiries welcome for complete system or individual components.

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: Gbjdpfoh Ad E Hjx Ab Tor 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Gbjdpjh Aiy Sefx Ab Tor Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Gbjdpfjrfucfox Ab Tor Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, 🔥 FOR SALE: Fiber Laser Welding Machine — XTW-1000 (2020) A professional-grade fiber laser welding machine, model XTW-1000, manufactured in June 2020, is for sale. The machine is in excellent working condition and ready for immediate use. This unit is perfectly suited for precision welding of stainless steel, carbon steel, aluminum, copper, galvanized sheet, and various metal alloys. Laser welding is 4–10 times faster than conventional TIG/MIG welding, produces clean and smooth welds with minimal heat distortion, and requires little to no post-processing work. 📋 TECHNICAL SPECIFICATIONS • Model: XTW-1000 • Laser type: Fiber laser • Output power: 1000 W • Laser wavelength: 1080 nm • Laser spot size: 1–2 mm • Rated power: 7500 W • Supply voltage: 220V / 50Hz • Current: 30 A • Laser safety class: Class 4 • Serial number: 202005145 • Manufacturing date: 2020-06-01 • Certification: CE ✅ APPLICATIONS • Sheet metal processing & manufacturing • Stainless steel product & kitchen equipment fabrication Gedpfx Aboyzcg Nj Tjbr • Automotive repair & bodywork • Elevator & staircase manufacturing • Tool & hardware production • Custom metalwork & repair workshops 📞 For further details and pricing — contact the seller!

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours Gbsdpfx Absrfucqo Tjr 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.