Used Eccentric Press Weingarten 80 Ton for sale (31,304)

Condition: used, Year of construction: 1978, pressure 125 t throat 340 mm stroke 20 - 160 mm no. of strokes 55 /min distance table/ram, max. stroke up, adjustment up 480 mm table surface area 1000 x 660 mm table height over floor 730 mm Isdpfx Aoyx Iiwoqpstg ram surface 600 x 300 mm ram adjustment 75 mm power requirement 8,5 kW weight 7,8 t dimensions (WxDxH) 1,4 x 2,8 x 2,7 m with motor, back gears, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, two-hand and foot operation

Condition: used, Year of construction: 1976, pressure 400 t throat 520 mm stroke 20 - 200 mm no. of strokes 30 /min distance table/ram, max. stroke up, adjustment up 680 mm Isdpfxoyx Iike Aqpotg table surface area 1600 x 1000 mm table height over floor 715 mm passage to the back 1000 mm ram surface 1300 x 800 mm ram adjustment 130 mm power requirement 38,0 kW weight 41,0 t dimensions (WxDxH) 2,1 x 2,6 x 4,2 m with pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, two-hand operation

Condition: used, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm Itodpfxeyx Iide Aqpeg hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1970, Pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 700 x 500 mm hole in the table 250 mm Iedpfx Aqoynmn Njpstg table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,5 t Dimensions (WxDxH) 1,6 x 2,0 x 2,8 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Isdpfeylzwtsx Aqpstg Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: used, Year of construction: 2009, pressure 40 t stroke 4 - 100 mm no. of strokes 130 /min throat 230 mm dayligth 475 mm table surface area 650 x 460 mm hole in the table 205 x 165 mm table height over floor 710 - 950 mm table adjustable 240 mm Itedpfxovzxpno Aqpeg ram surface 435 x 240 mm ram adjustment 85 mm power requirement 5,0 kW Weight 2,6 t dimensions of the machine ca. 1,2 x 1,7 x 2,3 m x m x m with motor, pneumatic hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, motoric centralized lubrication, adjustable table, two-hand and foot operation

Condition: used, Year of construction: 1990, pressure 100 t Isdsvuug Aepfx Aqpetg throat 300 mm stroke 20 - 120 mm no. of strokes 55 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 800 x 560 mm hole in the table 310 x 180 mm table height over floor 745 mm ram surface 520 x 245 mm ram adjustment 75 mm power requirement 5,5 kW weight 5,5 t dimensions (WxDxH) 1,1 x 2,4 x 2,4 m with motor, back gears, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1982, pressure 150 t throat 520 mm stroke 30 - 200 mm no. of strokes 15 - 60 /min distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1600 x 1000 mm hole in the table 1040 x 140 mm table height over floor 1000 mm passage to the back 1000 mm Isdpfx Asvuudbsqpotg ram surface 1400 x 800 mm ram adjustment 120 mm power requirement 20,0 kW weight 27,5 t dimensions (WxDxH) 2,3 x 2,75 x 4,5 m with infinitely variable drive, pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, semi-automatic ram adjustment

Condition: used, Year of construction: 1989, Pressure 080 t throat 300 mm stroke 8 - 140 mm no. of strokes 60 / 90 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 800 x 600 mm hole in the table 330 x 230 mm table adjustable 230 mm table height over floor 750 - 980 mm Iedsvuuavopfx Aqpetg ram surface 600 x 240 mm ram adjustment 100 mm power capacity 4,5 / 6,9 kW Weight 5,5 t Dimensions (WxDxH) 1,4 x 2,5 x 2,6 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation Iodsvuuaispfx Aqpotg

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Ijdpfxevut Nce Aqpotg Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: used, Year of construction: 2000, pressure 075 t throat 295 mm stroke 16 - 140 mm Stroke rate 75 / min Distance table/ram, max. stroke up, adjustment up 450 mm Table surface area 800 x 595 mm Ijdpfx Asvut Hhoqpetg Hole in the table 330 x 230 mm Table height above floor 745 mm Ram surface 470 x 180 mm Ram adjustment 80 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m overhauled by the manufacturer in 2000 with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, motorized central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm Iodpfevut Ewjx Aqpjtg table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced Ijdey R Nnfspfx Aqpjtg • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Itjdskvnggepfx Aqpsg Centre height 550 mm Max. wheel tread Ø 1100 mm Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width 5730 mm Height 3750 mm Weight 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed Itjdpewp Nv Hefx Aqpog 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard Isdpfsvwcdusx Aqpstg There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Table Width 3500 mm Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length Iedpfxomb Urds Aqpotg 6000 mm Width 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1986, total length: 1,500 mm, total width: 1,450 mm, total height: 2,900 mm, Colour: Grey Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Itjdpfoylb Edjx Aqpsg Lukas van Rossum

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm hole in the table 120 x 70 mm table height over floor 750 mm passage to the back 290 mm ram surface 240 x 240 mm ram adjustment 57 mm Itedoyq Sl Sjpfx Aqpjg power requirement 3,7 kW weight 2,8 t dimensions (WxDxH) 1,5 x 1,5 x 2,2 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 70300 € 1328.67 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram Iedowiqq Sepfx Aqpstg 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Isdpjtq Eqxsfx Aqpstg

Condition: used, Eccentric Press, C-Frame Press, Helmerding EH 35 B, Used Machine Itedpfx Ajy D Uhdsqpjg Manufacturer: Helmerding Type: EH 35 B Year of Manufacture: 1985 Weight: 2500 kg Technical Specifications: Press Capacity: 35 tons Stroke Length: 70 mm Table Dimensions: 600 x 450 mm Operating Modes: Continuous / Single stroke (Inching) Safety: Two-hand safety start control Dimensions: Overall Dimensions: 1020 x 1600 x 2400 mm Additional Information: Note: The base plate (bed plate) is not included with the machine.

Year of construction: 1981, condition: ready for operation (used), An eccentric press is offered. Press force: 45000kg, stroke: 8mm - 60mm, stroke rate: 80rpm - 400rpm, ram adjustment: 60mm, table area X/Y: 600mm - 700mm/450mm - 500mm, ram area X/Y: 450mm/300mm, installation height: 300mm - 350mm. Digital process monitoring, electronic cam control, servo feed control, pneumatic clutch-brake combination. Weight: approx. 4500kg, overall dimensions X/Y/Z: approx. 1800mm/1400mm/2600mm. Inspection possible by arrangement. Ijdpfx Aoy Tar Hsqpjtg

Year of construction: 1979, condition: ready for operation (used), An eccentric press is offered. Press force: 7500kg, stroke: 1mm - 40mm, stroke rate: 60rpm - 240rpm, ram adjustment: 70mm. Precision roller feed, external control unit, digital process monitoring, sound insulation cabin, strip decoiler. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 1400mm/1200mm/2100mm. Inspection possible by arrangement. Ijdpfxoy Tar Tj Aqpotg