Used Eccentric Screw Pump Used for sale (55,286)

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Specifications: Capacity: 400 L Pgsdpfeyma Dbex Alwet Construction Material: Stainless Steel Horsepower: 5.5 kW Jacket: No

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, Only 2 units available! Aerzen VM 30 screw compressor Used to pneumatically unload railway cars. Podpferkpp Hex Alwsgt Manufacturer: Aerzen Type: VM 30 Volumetric flow rate: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C Cooling of the compressed air is done with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28109 hours Compressor 4: 28973 hours Regular service was performed by a specialized service company! Not operated since 2019. Have been stored in a dry and heated location since then.

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW Pgedpfx Aexuv Htjlwjt weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Pgjdpfx Aledvm Euswet Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Coperion ZSK 45 Mc18 Twin-screw Extruder system (2023) Podpfx Asz Eh Dvolwsgt Drive motor Elin 400V IP55 122kW drive power 611 Nm 62.4Hz; 1906 1/min Gear drive Eisenbeiss Chiller 100kW cooling capacity side feeders ZS-B 58 Busch R5 RA 0025 F Vacuum pump/0.1mbar pabs/30m/h Vmax

Condition: excellent (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 1068, overall weight: 270 kg, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 42 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: type plate available, Kaeser Airtower 8 Screw Compressor (5.5 kW, 700 l/min) with Refrigeration Dryer /ct2499a/ Psdoz Er A Aepfx Alwjgt Kaeser Airtower 8 screw compressor with refrigeration dryer for sale; serviced from new and in excellent condition. Manufacturer: Kaeser Airtower 8 + TU11 refrigeration dryer Serial number: 1068 Year of manufacture: 2000 Operating hours: 47,000 h Power: 5.5 kW Air delivery: 700 l/min (42 m³/h) Pressure: 10 bar Motor speed: 3000 rpm Rated voltage: 400 V, 3-phase, 50 Hz Rated current: 12 A Pipe connection: 3/4 inch Includes Kaeser automatic condensate drain and filter Overall dimensions: Length: 675 mm Width: 625 mm Height: 1285 mm Weight: 270 kg

Condition: used, Year of construction: 2000, machine/vehicle number: SO142, Used MAGIC MOD. MGL5 HDPE 80 kg/h blow molding machineTechnical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with consistent quality and reliability. Configured with a single carriage and single head, it is tailored for medium-format containers up to 5.0 liters, offering robust performance for industrial packaging applications. The machine has undergone a major overhaul and is in perfect working order, both mechanically and electronically.Maximum container volume: 5.0 LMachine type: Extrusion blow molding, single carriage, single headClamping force: 83 kNNeck: European standard ( 38mm, 42mm)Hydraulic working pressure: 160 barBlow nozzle pressure: 0–70 barExtruder screw diameter: 70 mmExtruder motor power: 29 kWExtruder heating power: 10.6 kWHead heating power (single head): 3.4 kWMaximum die diameter (single head): 120 mmMold opening stroke: 210 mmMaximum mold dimensions (W – Thickness – H): 400 / 2×110 / 400 mmHydraulic pump/Power unit motor: 18.5 kWInstalled power (total): 62 kWAverage electrical consumption: 40 kWBlowing air pressure: 6–8 barAir consumption: 800 Nl/minCooling water pressure: 2–3 barCooling capacity (water): 30,000 Kcal/hHydraulic oil tank capacity: 270 LMachine footprint (W × L × H): 2200 × 4250 × 2900 mmComplete system weight: 7000 kgModel code: MGL5Advanced Automation & Control SystemsThe machine is equipped with a new Gefran PLC, delivering updated electronic control and a modernized program to ensure repeatable cycles, reliable temperature regulation, and stable extrusion. Multi-zone temperature management covers the extruder and head heating, providing precise control over melt conditions and wall thickness quality. Operator-friendly diagnostics support fast setup and streamlined troubleshooting, while integrated interlocks and status monitoring promote safe, efficient operation. The control architecture supports consistent processing of HDPE with accurate setpoint management, alarms, and real-time process visibility.Production Line Integration CapabilitiesDesigned for straightforward integration into industrial packaging and used bottling line environments, the machine features a part discharge belt conveyor for clean outfeed handling. It can be paired with downstream trimming, leak testing, visual inspection, and packing systems to create a complete second hand production cell. Format compatibility focuses on containers up to 5.0 liters, with a structure well-suited for HDPE bottles, jerrycans, and similar industrial packaging formats.Machine Condition & Ma... Pgedpezrgp Tsfx Alwet

Condition: used, Year of construction: 2018, machine/vehicle number: LC664, Used complete craft beer brewery 750LTechnical Specifications & Performance DataThis complete bottling line for beer combines essential packaging machinery for craft-scale beverage production with professional utilities to ensure consistent quality and low oxygen pickup. Engineered for small to mid-size breweries, the line delivers dependable performance in a compact, semi-automatic configuration that supports efficient changeovers and straightforward operation.Production speed: 600 bottles/hour (semi-automatic rinsing - filling - capping operation)Process stages: Bottle rinsing and sanitizing; isobaric-style preparation (vacuum pre-evacuation and CO2 purging); filling and capping; labeling with integrated printingContainer types: Designed for Glass and PET bottle handlingFormats: 0.33L - 0.50LCap type: standard crown capRinsing head: 6 Filling head: 6Capping head: 6 Product compatibility: Ideal for Beer production applicationsCarbonation: Inline beer carbonation unit for controlled CO2 dosingUtilities: Air compressor with dryer; glycol refrigeration/chiller system; CIP cleaning and sanitization systemRefrigeration package: Glycol tank 2000 L with Bitzer refrigeration compressor unit and Wilo variable-frequency glycol pumpConstruction: Food-grade materials with stainless steel product-contact componentsAdvanced Automation & Control SystemsThe semi-automatic modules are designed to streamline essential operations while preserving operator control. The filler and capper integrate two-stage vacuum pre-evacuation, CO2 purging, and foam generation prior to capping to minimize dissolved oxygen. The labeling machine features a self-adhesive system with an integrated printer for on-the-fly coding and batch identification. Safety interlocks and emergency stop functions support operator protection during use.Semi-automatic control on each module for intuitive operationIntegrated printer on the labeling machine for date/lot codingLow-oxygen filling workflow: vacuum cycles, CO2 purge, foam before cappingDesigned for quick cleaning and routine maintenanceProduction Line Integration CapabilitiesThis used bottling line integrates easily with upstream brewery operations, including bright beer tanks and carbonation systems. It can operate as a standalone packaging cell or be tied into existing conveyors and QA checkpoints. The semi-automatic design supports flexible bottle formats common in craft beer without complex retooling.Standalone or inline operation with existing brewery equipmentCompatible with standard beer bottle geometriesSuitable for beer applications within broader industrial packaging and beverage production environmentsExpandable with additional conveyors, inspection, or secondary packaging modules Pgodpfxjzrgqdo Alwjt

Condition: used, Ball screw with SIEMENS servo motor Linear guide with SIEMENS permanent servo motor Type: 1FK6044-7AH71-1EG0 Type: 1FK7044-7AH71-1EG0 Identification No.: YF RN22 5076 01 001 Year of manufacture: 2003 Axis travel: 540 mm Overall length: 900 mm Shaft diameter: 40 mm Thread pitch: 40 mm Ball diameter: approx. 6 mm - Compact unit with servo motor and ball screw nut - Ball screw with twist-resistant guidance, drive via nut - Ball screw Ø 40 mm (hollow shaft, inner diameter = approx. 22 mm) - SIEMENS permanent servo motor, type: 1FK6044-7AH71-1EG0 (Serial No.: Identification No. YF RN22 5076 01 001) Overall dimensions L x W x H: 900 x 200 x 330 mm Weight: 30 kg Good condition Removed from a functional special machine, tested before removal. Pgjdpfxjgi E Hdj Alwjt 8 units available The stated price refers to 1 unit.

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Pgedebuqn Hopfx Alwot Available at a special price – immediately available.

Condition: used, Battenfeld plasticising screw Ø 18 mm- as good as new - removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalinlet: 17,80 mm centre: 17,80 mm outlet: 17,80 mm stroke volume: 22.9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm spare part no.: 100TM842 Dition: neuwertig Pgedpfxeu Tv A De Alwot

Condition: used, Year of construction: 2002, machine/vehicle number: LV46, Used R. BARDI nilo 2-20R bottle washer 20000 BPHTechnical Specifications & Performance DataThe R. Bardi Nilo 2-20R is a linear bottle washer designed for returnable glass bottle handling in bottling and industrial packaging operations. Manufactured in 2002, this machine is engineered to support high-throughput washing processes within a used bottling line, combining bottle cleaning performance with format flexibility.Manufacturer: R. BardiModel: Nilo 2-20RYear of manufacture: 2002Maximum output: up to 20,000 bottles/hourConfiguration: LinearOperating pressure: 6 barCompatible formats: 0.25L, 0.33L, 0.5L and 0.75L bottles, plus other formatsContainer material: GlassAdvanced Automation & Control SystemsThis bottle washing machine is intended for continuous industrial operation, with a linear layout that supports controlled bottle transport through the washing process. Its design is suitable for integration into automated beverage production environments where reliable handling of returnable bottles is required. The stated 6 bar operating pressure should be considered when assessing the compressed-air infrastructure of the installation.Format-specific adjustments are important for maintaining stable bottle movement and effective cleaning performance. Before commissioning, operators should verify the compatibility of guides, carriers, infeed and discharge interfaces with the glass bottle formats to be processed.Production Line Integration CapabilitiesThe Nilo 2-20R is suited to the washing stage of a returnable glass bottle production line. In a typical used bottling line, it is positioned after bottle unloading, decrating and decapping operations, and before empty-bottle inspection, filling, capping, labeling and secondary packaging.The machine processes returnable glass bottles with paper labels, paper and aluminum labels, as well as unlabeled bottles. This capability makes it relevant for industrial packaging lines handling recovered containers that require preparation before refilling. The supported 0.25L, 0.33L, 0.5L and 0.75L formats provide flexibility for beverage production applications using multiple bottle sizes.Machine Condition & Maintenance HistoryThe machine is currently in operation and can be inspected while running in production until April 2027. Its operating condition can be verified directly before purchase. The stated commercial condition is as inspected and accepted, and a 6-month warranty is included.For a second hand bottle washer, an on-site operational inspection provides an opportunity to assess bottle flow, washing-cycle performance, format handling and integration requirements against the intended production line configuration.Operational Performance & VersatilityDesigned for returnable glass bottle applications, this R. Bardi bottle washer supports the preparation of labeled and unlabeled containers for reuse. Washing equipment of this type is a central element in returnable bottling operations, helping remove labels and prepare bottles for downstream inspection and filling.The linear machine arr... Pjdez E Dgyspfx Alwogt

Condition: used, Year of construction: 2008, machine/vehicle number: TP128, Used AROL Pick & Place capping machine 10000 BPHTechnical Specifications & Performance DataThis Arol capping machine is designed for the closure stage of a used bottling line, applying T caps and plastic screw caps to bottles. Its pick-and-place capping system supports accurate cap handling and controlled application in beverage production and industrial packaging operations.Manufacturer: ArolYear: 2008Maximum output: up to 10,000 bottles per hourCapping system: Pick-and-placeCap types: T cap and plastic screw capRotation direction: ClockwiseDocumented head configuration: 8 heads, with references to 6 T-cap heads and 6 screw-capping headsAdvanced Automation & Control SystemsThe pick-and-place system is intended to position caps before closure, supporting repeatable capping operations at line speed. Clockwise rotation is specified for the machine configuration. During refurbishment, the capping head setup, cap delivery components, sensors, drives, and control functions can be assessed to ensure correct synchronization between bottle handling and cap application.The machine can be incorporated into an automated bottling equipment layout with suitable infeed and discharge transfer systems. Its cap-handling arrangement is relevant for facilities processing different closure styles, subject to the installed tooling and bottle-neck compatibility.Production Line Integration CapabilitiesThis capping machine is suited to installation downstream of a filling machine and upstream of labeling, inspection, or secondary packaging equipment. It can form part of a second hand bottling line for PET and Glass bottles, where reliable closure application is essential before bottles continue to the next packaging stage.For industrial packaging and beverage production, conveyors must present bottles consistently to the capping carousel and remove closed bottles without interrupting line flow. Bottle guides, starwheels, cap feed arrangements, and change parts should be matched to the required bottle profile, neck finish, cap dimensions, and closure type.Machine Condition & Maintenance HistoryThe machine is under maintenance and requires refurbishment. This status makes it appropriate for buyers planning a technical review and overhaul before commissioning. A refurbishment programme can focus on the mechanical condition of the capping heads, pick-and-place mechanism, cap transfer components, rotary transmission, and bottle-handling interfaces.Inspection of wear parts, lubrication points, guarding, electrical components, and format-related tooling is important before the machine is returned to service. The stated 2008 manufacturing year provides useful context for planning servicing, replacement parts, and integration into an existing production line.Operational Performance & VersatilityThe Arol capping machine combines T-cap and plastic screw-cap capability with a pick-and-place operating principle. This makes it relevant where a bottling operation requires dedicated closure handling for bottles fitted with these cap styles. The specified maximum capacity of up to 10,000 bottles p... Psdpfxez E Diho Alwegt

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 87700 € 1657.53 € 130 to 4.5 mm 650 mm 950 mm 220 mm 1 - 132 mm 50 1/min 6 95 mm 70 mm 325 mm 500 mm 11 kW 1800 mm 1725 mm 3020 mm 8000 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for Pgsdpfx Aowiqn Rjlwet * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 61200 € 1156.68 € 80 to 4 mm 600 mm 900 mm 200 mm 1 - 110 mm 60 1/min 6 80 mm 50 mm 300 mm 400 mm 7.5 kW 1600 mm 1500 mm 2750 mm 5700 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc. Pgedswiq I Depfx Alwot

Year of construction: 2009, condition: used, For sale are 8 free-flow centrifugal pumps from Pumpenfabrik Wangen, manufactured in 2009. These are the ESP model. Five of the eight free-flow centrifugal pumps have a motor. Quantity: 5 / 3 with motor Length: 172cm (without motor) / 229cm (with motor) Height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No.: 920607 Year of manufacture: 2009 Podpfx Alega Dtcewsgt Connections: DN100 PN16 Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0003.09 rpm: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6.30

Condition: excellent (used), Year of construction: 2007, PROD. CREEMERS TYPE RCD30/8 S/N CAI242107 YEAR 2007 POWER (kW) 30 OUTPUT (m3/min) 3.54 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 10385/17245 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air Pjdpsz E Ht Nsfx Alwegt ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: used, Year of construction: 2004, Technical details: pressure capacity: 10 bar volume capacity: 1,1 / 0,95 m³/min. rotary speed of motor: 8500 U/min Podpez Dudasfx Alwogt Number of working hours: 29.498 h weight: ca. 310 kg dimensions L x W x H: Kompressor: 1,5 x 0,7 x 1,5 m dimensions L x W x H: Kälte Trockner: 0,45 x 0,45 x 0,5 m On a steel structure, welded, the feet are stabilized with rubber feet, stand: Compressor: -15 bar working pressure -speed max. 8.500 rpm. -Cooling air 980 m³/h -volume flow at 7.5 bar = 1.1 m³/min. and at 10 bar = 0.95 m³/min. Refrigeration compressed air dryer type 406AP: -volume flow 65 m³/h -Cooling air demand 450 m³/h -refrigerant R 134a -compressed air perm. min./max.: 2 / 16 bar -pressure perm. refrigerant min./max.: 15 / 50 bar -2x connections with 3/4" and 1/4" each Compressed air tank Renner: -Tank size Ø 500 x 1.350mm -operating pressure max. 11 bar -content for 250 liters -div. connections *

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: LC676, Used Tetra Pak TBA 19 200ML Slim Filling machineTechnical Specifications & Performance DataThis used bottling line is built around a Tetra Pak TBA 19 V10 filling machine for 200 ml Slim carton formats. Designed for dairy product processing, the line provides an integrated solution for filling, straw application, secondary packaging and product conveying in an industrial packaging environment.Filling machine: Tetra Pak TBA 19 V10Container format: 200 ml Slim Tetra Brik cartonProduct application: dairy productsYear of manufacture: approximately 1996Running hours: approximately 26,000 hoursConveyor system: approximately 30 meters, including 4 x 90° curves and 2 x chain tensionersAdvanced Automation & Control SystemsThe line combines dedicated filling and packaging equipment into a coordinated production arrangement. Its conveyor system supports the controlled transfer of individual cartons between the filling, straw application and packaging stages. Chain tensioners are included to help maintain reliable conveyor operation and product flow through the line.Machines of this type are typically operated through the individual controls of the filler and downstream packaging modules, allowing operators to manage the principal filling and handling stages from the relevant equipment stations.Production Line Integration CapabilitiesThis complete carton bottling line is configured for the 200 ml Slim format and includes filling, straw application, tray packing, tray shrink wrapping and conveying equipment. It is suitable for integration into dairy beverage production operations requiring a compact line layout for Tetra Brik cartons.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 19 V101996Various Equipment - Straw ApplicatorTetra Pak TSA 211996Various Equipment - ConveyorsTetra Pak1996Case PackerTetra Pak TCBP 70 Multiinfeed1996Shrink WrapperTetra Pak TTS 511996The Tetra Pak TCBP 70 Multiinfeed tray packer is compatible with, or can be configured as an option for, wrap-around packaging. The Tetra Pak TTS 51 tray shrink wrapper completes the secondary packaging process after tray packing.Machine Condition & Maintenance HistoryThe second hand bottling line has been workshop checked, fully tested ... Pedjz E Dgaepfx Alwogt

Condition: used, machine/vehicle number: LC661, Used CFT-JORDAN complete fruit and vegetable puree production lineTechnical Specifications & Performance DataThis used bottling line is configured as a complete aseptic filling and processing line for fruit and vegetable purees. It integrates preparation, thermal treatment, deaeration, sterilization, and aseptic bag-in-bin/bag-in-drum filling. Designed for industrial packaging and food-grade production, it offers second hand value with robust stainless steel construction and modular components suitable for continuous operation.Main aseptic filler: MACROPACK TM2000/3Filling performance: up to 90 bags/hour (220.0L) or 30 bins/hour (1000.0L)Processing capacities (typical): crushers 9–15 t/h; enzymatic deactivators 20 t/h; vacuum deaerator 20 t/h; sterilizer 17 t/hThermal equipment: Pasteurizer 1.5 t/h (4000 x 1600 x 2350 mm); Enzymatic Deactivators ETS 20 fast/slow; Sterilizer OLIMPIC TC XX/ASUtilities (selected): sterilizer steam 2100 kg/h; deactivator steam 2000 kg/h; aseptic filler steam 50 kg/hKey powers (selected): Sterilizer 120 kW; Enzymatic Deactivator fast 18 kW; slow 12.5 kW; Aseptic filler 10 kW; pumps 1.2–18.5 kWMaterials: stainless steel tanks and sanitary pumps for hygienic product contactContainer formats: 220.0L bags; 1000.0L binsAdvanced Automation & Control SystemsThe line features modular automation at machine level with integrated motor control on pumps and thermal units. The aseptic filler is equipped for controlled dosing and steam-assisted sterilization of filling circuits. Operator panels on key units enable parameter setting for temperatures, flow rates, and timings. Safety interlocks and emergency stops are included on major modules such as the sterilizer, deactivators, and filler. Quick-change product hoses, sanitary clamps, and pump speed adjustments support rapid changeovers between puree types and package sizes.Production Line Integration CapabilitiesThis second hand aseptic processing and used bottling line is engineered for cohesive operation across preparation, thermal treatment, deaeration, sterilization, and aseptic filling. The included conveyors, pumps, and buffer tank ensure stable product flow, while the CIP station enables in-place cleaning of product-contact circuits. The system suits food and beverage production environments handling natural and concentrated purees.Machine typeManufacturer / ModelYearVarious EquipmentA Facchini 905/20 (Elevator)2007Various EquipmentCrusher 15 t/h (circular blades)Various EquipmentCrusher 9 t/h (studded shaft) Pedpfx Aoz E Dh Djlwegt

Year of construction: 1999, condition: used, machine/vehicle number: LC654, Used ALFA LAVAL oil production lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous production with a throughput of 2 tons per hour. Built around proven Alfa Laval technology, the line combines robust mechanical design with food-grade materials to ensure reliable operation and consistent oil quality. Its modular configuration streamlines the core olive oil extraction steps from washing and preparation through malaxation and separation.Overall capacity: 2 tons/hourDecanter centrifuge: Alfa Laval NX 17Disc separators: Alfa Laval 407, automatic (2 units)Malaxers (double): Stainless steel (3 units)Malaxer (small): Stainless steel, with paste pump P 60 (1 unit)Crusher: Stainless steelOlive elevator: Integrated feedingOlive washer: Pre-cleaning and debris removalElectrical control panel: Alfa LavalConveying: Various screw conveyors for paste and by-productsThe equipment list emphasizes sanitary stainless-steel construction, automated separation, and balanced material handling to minimize oxidation, protect product integrity, and support high-efficiency operation.Advanced Automation & Control SystemsAutomation centers on an electrical control panel that coordinates key process units for safe, consistent performance. Automated Alfa Laval 407 disc separators provide steady clarification with reduced manual intervention. Interlocks and standard operator safeguards support secure running and streamlined start/stop routines. The configuration is designed for straightforward parameter control, facilitating repeatable results across production shifts.Production Line Integration CapabilitiesThe line is configured for seamless integration from raw olive reception to downstream storage tanks and final packaging. Its modular equipment layout connects via screw conveyors, an olive elevator, and a washer, enabling continuous flow into the crusher, malaxers, decanter, and separators. This processing core can be paired with industrial packaging solutions or a used bottling line for vegetable oil filling into PET or glass containers, aligning with broader beverage production and food-oil packing environments.Machine type/categoryManufacturer / ModelYearOlive Washer—Olive Elevator—Olive CrusherStainless steelMalaxers (double)Stainless steel Podpfx Aljz E Dibowsgt

Condition: used, Year of construction: 2010, machine/vehicle number: SO146, Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes a short-circuit rating of 25 kA RMS symmetrical, supporting integration into an appropriately designed industrial electrical system.The rotary PET blow molding process is suited to automated preform handling, bottle formation and discharge to downstream bottling equipment. The supplied preform handling equipment includes an elevator column, mini-hopper assembly and main hopper/feeder.Production Line Integration CapabilitiesThis PET bottle blower can serve as the bottle-forming stage of a used bottling line for beverage production and industrial packaging. It can be integrated with preform supply equipment upstream and with air conveyors, filling monoblocks, labeling machines, shrink wrappers and palletizing systems downstream.The supplied equipment list includes a Sidel EBH 2050 PET preform press manufactured in 2010 and a Sidel-Alsim air conveyor manufactured in 1999. The air conveyor supports transfer of newly formed PET bottles toward subsequent packaging machinery.Preform elevator column: 5,200 mm length x 1,300 mm width x 1,200 mm height; 250 kgMini-hopper assembly: 2,900 mm length x 1,630 mm width x 1,160 mm height; 367 kgMain hopper/feeder: 2,590 mm length x 1,850 mm widthMachine Condition & Maintenance HistoryThe machine is presented as a second hand Sidel PET blow molding machine with identified year, model, output and electrical data. Buyers can use the stated configuration and associated handling equipment details when planning inspection, recommissioning and integration into a PET bottling or industrial packaging production line.Operational Performance & VersatilityThe SBO10 is designed to convert PET preforms into finished PET bottles through a rotary stretch-blow molding process. Its 10-cavity arrangement supports continuous bottle production at the stated output. The specified Ø28 1881 neck finish identifies the available preform and bottle-neck configuration.As part of beverage production equipment, a PET blow molding machine typically supplies e... Pgsdpfx Alez E Dfijwot

Condition: used, Year of construction: 2008, machine/vehicle number: SO145, Used PLASTIBLOW PB1H-D blow molding machine - Year 2008Technical Specifications & Performance DataThe Plastiblow PB1H/D is a used industrial blow molding machine designed for producing plastic bottles through extrusion blow molding. Built in 2008, this double-carriage machine is configured with a single extrusion head and is suitable for manufacturing two 1.0L bottles simultaneously. It is a practical solution for manufacturers seeking second hand industrial packaging equipment for bottle production.Manufacturer: PlastiblowModel: PB1H/DYear: 2008Speed: 1L format 600/700 bottles/hour ( 2 cavity mold) Configuration: Double carriage, single headProduction configuration: 2 bottles of 1.0L produced simultaneouslyElectrical supply: 400V, 50HzExtruder configuration marking: E50/26Conformity marking: CEAdvanced Automation & Control SystemsThe machine is equipped for operation on a 400V, 50Hz electrical supply. Its double-carriage arrangement supports alternating mold movements during the blow molding cycle, helping organize bottle production around the molding process. The single-head layout is intended for a two-bottle 1.0L production configuration.For a used bottling line or dedicated plastic packaging installation, the machine should be integrated with suitable electrical protection, process controls and operator-access safeguards appropriate to the final production environment.Production Line Integration CapabilitiesThis Plastiblow blow molding machine can serve as the bottle-production stage of a PET or plastic container packaging system, depending on the material and tooling installed. It can be positioned upstream of downstream bottling equipment such as rinsing, filling, capping, labeling and secondary packaging machinery.The double-carriage configuration is suited to installations requiring a compact bottle manufacturing process before beverage production or other industrial packaging operations. Mold selection, neck finish, bottle geometry and resin compatibility should be matched to the required container specification and the downstream filling line.Machine Condition & Maintenance HistoryThis 2008 Plastiblow PB1H/D blow molding machine is presented as ready for operation. The available identification data confirms the machine model, electrical supply and CE marking. Before commissioning, routine inspection of the extrusion system, molds, cooling circuits, pneumatic equipment, safety devices and electrical components is recommended as part of normal installation and startup procedures for second hand machinery.Operational Performance & VersatilityThe PB1H/D is configured to make two 1.0L bottles at the same time using a single extrusion head and double carriage. This arrangement supports repeatable production of matched bottle formats where a two-cavity mold configuration is required.Blow molding equipment of this type forms hollow plastic containers for use across industrial packaging applications. Final production capability depends on the installed mold set, extrusion tooling, resin, process settings and au... Pgodpoz E Dfpefx Alwjt

Condition: used, mileage: 3,31,428 km, power: 265 kW (360.30 HP), first registration: 10/2008, fuel type: diesel, empty load weight: 25,780 kg, maximum load weight: 220 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,200 mm, next inspection (TÜV): 11/2026, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, seat heater, traction control, Vehicle location: Bovenden, rental location, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, 16-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, work lights, leaf spring suspension, aluminum tank, low-noise G1, sunroof, 4-point hydraulic support, green environmental badge. Wheelbase: 4200 mm, Superstructure: Schwing-Stetter P2023 concrete pump with S31XT8 mast (approximate reach 30.5m), 7.5t front axle, H7 13t rear axle, bevel gear 233, disc brakes on front and rear axles, Telligent braking system with ABS and ASR, pipe rupture protection for braking system, rear axle stabilizer, steel bumper, PSM, distributor cockpit, reinforced clutch, construction site filter, on-board diagnostics 2, transmission oil cooling, auxiliary drive independent of transmission MB 1.4, transmission lock NMV. Operating hours concrete pump: approx. 4644h Psdpfxjz E Nitj Alwegt Operating hours mast: approx. 5928h ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Pfaudler glass lined vertical reactor manufactured by Pfaudler, model BE6300. Volume: Total approximate capacity: 8190 L Technical features: Model: BE6300 Vessel working pressure: -1/+6 bar Vessel working temperature: -25/+120 ºC Half-coil/jacket working pressure: -1/+6 bar Half-coil/jacket working temperature: -25/+120 ºC Half-coil/jacket volume: 796 L Equipment configuration: -Agitator -Half-coil Specifications: Pgodjyxd D Repfx Alwet Internal pressure: 87 PSI Material of Construction: glass lined