Used double end tenoner for sale (50)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: CAR-LPR-001, working width: 300 mm, feed rate X-axis: 15 m/min, overall weight: 4,500 kg, input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 24 mm, Equipment: double-sided, Equipped with an infeed table 300x55x100 cm, 2 transport chains with prism guides (length approx. 2400 mm), 2 pressure chains with drive motor and height adjustment, 2 machining motors with profiling cutter Ø 250 mm and height adjustment, 2 machining motors with chamfering cutter Ø 150 mm and height adjustment, manual width adjustment, 2 pre-cutters. No air connection required. CAPACITY: width minimum 90 mm, width maximum 300 mm, thickness minimum 9 mm, thickness maximum 24 mm, length minimum 450 mm, length maximum infinite mm; total power approx. 25 kW; including flexible hoses up to the ceiling and including lifting table. Itsdpfez Rkctjx Anisn The machine is in like-new condition and in perfect working order. Perfection in simplicity and quality!

Condition: ready for operation (used), Three drive units per side (top, bottom, side) Top and bottom motors: 2.2 kW Side motor: 3 kW Itedjz Ii Afepfx Anijn Spindle diameter: 40 mm Cutting length: 300 cm Overall dimensions: Length: 5.1 m Width: 185 cm Height: 150 cm

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3458 F, working width: 2,500 mm, Double tenoner FRIULMAC 2003, 3+3 heads Iodpfx Ansx Rdrfoijtn

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3928 A, working width: 250 mm, Equipment: documentation/manual, Motor Power: 30 kW Equipped with: Hnebni Iow A A E Is Rp Tot 1+1 saws 1+1 milling unit 1+1 drilling unit Iedpfxjxix Tfs Aniotn Max length: 1000 mm Max width: 250 mm Max thickness: 50 mm double end tenoner, double drilling, step by step

Condition: used, machine/vehicle number: 008379, Squaring: First and Second Pass Max Panel Thickness: 35 mm Max feed speed: 30 m/min Distance between dogs: 320 mm Itodozvwp Eepfx Anisn

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 4471A, total width: 3,500 mm, total length: 5,500 mm, total height: 2,400 mm, overall weight: 6,700 kg, input voltage: 400 V, type of input current: AC, space requirement height: 3,000 mm, space requirement length: 1,200 mm, power: 40 kW (54.38 HP), Equipment: documentation/manual, double-sided, Machine for double side tenoning with bridge drilling dowelling not included operations RIGHT WING: 1st - saw up/bottom, 2nd - vertical cutter (frese), 3rd - vertical drill LEFT WING: 1ST - SAW UP / BOTTOM, 2nd - horisontal cutter (frese) Iedpfx Anov T U A Usijtn 3rd - vertical cutter (frese) AFTER WINGS : - one verticla drill - two horisontal drills BRIDGE: - one angled drill

Condition: excellent (used), Catalog number: 6462 TECHNICAL DATA - 2.2 kW motor - 380V power supply - 0.9 kW head feed motor - 2 x 100 mm dust extraction port diameter - dimensions (L/W/H) 1330x1100x1220 mm - weight 920 kg Machine equipped with: – 2 tables with squares, dimensions 385x330mm – 2 pneumatic clamps – tables with adjustable angle in two planes – possibility to create longitudinal and circular tenons on the tables – tables adjustable up/down – tenon width adjustment – central lubrication – unpainted – Italian production – used tenoning machine, very good condition Net price: 23,900 PLN Net price: 5,558 EUR Ijdpfozr U Evjx Anijtn Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6024 TECHNICAL DATA: - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW - Power supply: 380V Isdpjztaqtefx Anistn - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg The machine is equipped with: – 2 tables with dimensions of 300x340mm – Pneumatic clamps – Tables with adjustable angle in two planes – Possibility to create longitudinal and circular arbors on the tables – Table speed and spindle speed adjustable mechanically – Tables adjustable up/down – Arbor width adjustment Net price: 16900 PLN Net price: 3930 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6969 TECHNICAL DATA Circular saw: - max. saw blade diameter 300mm - spindle 30mm - max. cutting height 60mm - blade adjustable front/rear - motor 2.4kW Milling machine: Arbor: - spindle diameter 40mm - spindle working height 190mm - spindle locking - max. milling cutter diameter 360mm - motor 7.5kW - 2 types of rotation speeds - material clamping - side carriage adjustable up/down, front/rear Itjdpfx Anezw Dgmoien - angle guide - retractable support from the table - manual carriage feed - dust extraction nozzle diameter 80mm, 160mm - dimensions L/W/H 1910x1960x1800mm, - weight 830kg – Polish production – DTR documentation – upper control panel – used milling machine, very good condition Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: TSA5215 – TSA5218 – TSA5220, We are an Italian Company and we have this machinery installed into our factory in Tunisia. The line is currently configured for the production of floating flooring strips with Uniclic profile and is equipped with a complete set of diamond tools. The line is still installed and can be inspected under power. Production tests are available upon request. Line includes • Panel cutting machine • Motorized roller conveyor • Double machine for long-side profiling • Automatic transfer system • Double machine for end profiling • Automatic stacking system • Complete handling conveyors Technical Features • 10 spindles • Opening machine 1: 180–1200 mm • Opening machine 2: 200–1800 mm Itodpfszkv Ezox Anion • Installed power: 92 kW • 380 V electrical supply Advantages • Complete production line • Immediately available • Installed and fully operational • Inspection and production test possible • Ideal for flooring, panels and similar products

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Itjdpfx Anjzc Rdkoien

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, working width: 3,000 mm, overall weight: 5,000 kg, input voltage: 380 V, Equipment: documentation/manual, Celaschi TSA300DS double-blade squaring saw Mobile shoulder opening 3000 mm, controlled via touchscreen Minimum working width 200 mm 5+5 motor groups Slider width 65 mm Itsdpjzfvtnjfx Anion Feed rollers with 400 mm pitch Pneumatic activation of the cutter block Automatic activation controlled by CNC Adjustable feed speed (m/min): 4-24

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW Isdpfxjzuzfbo Anijtn 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, functionality: fully functional, Tenoning machine by SAUTEREAU in excellent condition Itsdox U U Irspfx Anien

Condition: excellent (used), SIZING-TENONING LINE, composed of the following machines: A) Loader (portal/bridge) double pick-up station "SAG" CAR MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 C) Turning Station "SAG" Mod. Girapannelli (from lengthwise to crosswise) with double cone system. D) 2nd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 E) Turning Station "SAG" Mod. Girapannelli, (from lengthwise to crosswise) with double cone system. F) 3rd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 H) Stacker (portal/bridge) double stacking station "SAG" CAR/S MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker Isdpozzzupefx Anietn

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, Torwegge Double End Tenoner H 613 E – Year 1991 – Excellent Condition – Extensive Tooling Included For sale is a high-quality Torwegge Double End Tenoner, Type H 613 E, manufactured in 1991, and made in Germany to the highest quality standards. The machine is in exceptionally well-maintained technical and visual condition and has been regularly serviced and professionally maintained throughout its operating life. It was reliably used in industrial woodworking until recently and is ready for immediate operation. Another significant advantage is the modernized electrical system: The complete control cabinet was completely renewed approximately four years ago by Robust Maschinenbau, resulting in a modern and reliable electrical system. The scope of delivery includes an extensive set of tools, numerous spare parts, and all original documents, operating manuals, and technical documentation. Technical data Manufacturer: Torwegge Holztechnik GmbH & Co. KG Type: H 613 E Year: 1991 Machine number: 394 Operating voltage: 380 V Frequency: 50 Hz Iedpfeywfirox Anistn Connected power: 30 kW Main fuse: 100 A Scope of delivery Torwegge Double End Tenoner H 613 E Extensive set of tools Various spare parts All machine documents and documentation Completely renewed control cabinet (approx. 4 years ago) The machine can be inspected, demonstrated under power, and thoroughly tested at any time by prior appointment. A forklift is available for loading the machine. If you have any questions or would like to arrange a viewing, please do not hesitate to contact us.

Condition: good (used), Double-end tenoner, brand SCM, model Concept 2000, complete with electronic feed and height adjustment. Chipbreaker on the right and left spindles. Timing shaper cutter + fixed shaper cutter on the right and left spindles. Shaper cutter with grinding wheel on the right and left spindles. Belt sanding unit on the left spindle. Inverters on all shaper cutters. Working width 3000 mm. Pin ejection with selector. Track shoe width 50 mm for processing narrow parts. Machine in perfect condition, ready for use. Itsdozfprkopfx Anien

Condition: excellent (used), Year of construction: 1980, 1 x AUTOMATIC DOUBLE END TENONER SPANEVELLO Model STDL with 3 + 3 spindles TECHNICAL DATA: - Working width: 170 – 3000 mm - Workpiece thickness: 5 – 120 mm - Top pressure beams with drive belts and clutch - Bottom feed chains, 70 mm width - Automatic lubrication of bedplates - Automatic lubrication of feed chains - Dogs distance: 340 mm - Variable feed speed: 1.5 – 20 m/min - Power supply: 380V / 3ph / 50 Hz MACHINE EQUIPPED WITH: - Left-hand adjustable infeed side fence – manual horizontal adjustment Jump Cutting/Scoring Units 1-2: - Motors: 1.5 HP – 3000 RPM - Shaft diameter: 35 mm x 55 mm length – Max. tool diameter: 200 mm Hogging/Milling Units 3-4: - Motors: 5 HP – 3000 RPM - Shaft diameter: 40 mm x 55 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 140 mm - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout Milling Units 5-6: - Motors: 5 HP – 3000 RPM - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout Iodpfx Asyurqpsnijtn - Shaft diameter: 40 mm x 95 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 120 mm Machine in good working condition. Tested in our workshop prior to delivery.

Condition: used, Technical specifications: Max. saw blade diameter: 300 mm Min. saw blade diameter: 100 mm Saw blade arbor diameter: 25 mm Router bit arbor diameter: 35 mm Router bit arbor height: 120 mm Manual feed adjustment for the arbor and saw blade Table length: 1400 mm Manual clamping device Separate motor for the arbor and saw blade Power supply: 400 V Iodpfxszik Dis Anijtn Overall dimensions: Length: 1950 mm Width: 1000 mm Height: 1250 mm

Condition: excellent (used), I sell the double end cutting and tenoning machine CELASCHI TSA 300. Ijdpfxjvxu Uhj Anietn Working width up to 3000mm Feeding speed 3-18 m/min. Configuration left side / fix: 1 pc. cutting saw aggregate 4,0 KW 1 pc. moulding aggregate 5,5 KW Configuration right side / moving: 1 pc. cutting saw aggregate 4,0 KW 1 pc. moulding aggregate 5,5 KW Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount Isdpjyk Empsfx Anietn 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.

Condition: excellent (used), working width: 2,500 mm, Gabbiani double-head panel squaring machine 3 + 3 working units Maximum working width 2500 mm Itjdpfszfvufjx Anijn Overhauled and in working order

Condition: used, Year of construction: 2001, Celaschi brand squaring machine, composed of 2 single-side machines (right + left), type TA, model 20-MCI, year 2001 (CE), with 2 milling groups per side, used. Workable piece size: min/max width: 60/160 mm Isdpfx Anek N I Nboijtn min/max length: 350/1400 mm min/max thickness: 13/23 mm

Condition: excellent (used), Year of construction: 1998, Double end tenoner Homag Itsdjrcbccjpfx Anisn 4+4 motors Opening side 2500 mm Feeding speed 4-24 m/min. Perfect for panels, windows, furniture

Year of construction: 2007, condition: excellent (used), I sell the double end cutting and tenoning machine FRIULMAC IDRAMAT, Year 2007. Working width up to 2500mm Itsdpfx Anjib A E Ajion Configuration left side / fix: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 + 1 pcs. grooving saw aggregates front + back Configuration right side / moving: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 pc. special milling aggregate / 5,5 KW Material pressure feeding band from top Special construction, suitable also for sizing. Throughfeed machine. Siemens Simantic control panel. Very good condition. Available immediately.