Used Emo-Hemo-Metalclean Solvent Cleaning System Modified Alcohol for sale (43,709)

Condition: new, Year of construction: 2027, VFK MANUAL POWDER COATING BOOTH Dedpsvv Rfkefx Ap Doku WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: excellent (used), overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic Production Booklet Maker (PBM) 350, including the (SquareFold) BookFold Module and Trimmer Module. This booklet maker is in very good condition! Dkjdpfjz Atuqjx Ap Dsu The machine can be used offline, as shown in the photo, or connected to a machine from the Ricoh Pro 8100/8200, C7100/C7200, or C9100/C9200 series. Counter readings: PBM 350: 187,000 BookFold Module: 176,000 Trimmer Module: 207,000 Produces professionally finished booklets, both inline and offline, with stapling and folding. Capacity: up to 35 sheets of paper (80 g/m²) for folded booklets of approximately 140 pages. Supported paper sizes: width of approximately 206 mm to 320 mm, length up to approximately 457 mm. Suitable for A and B formats and various custom sizes. Are you looking for other options for this machine? We are flexible and can customize the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical service department. Would you like more information? Please feel free to contact us. Worldwide shipping is possible.

Condition: excellent (used), EXTRACTION SYSTEM HUNKELER HKU 2000 (Compact Extraction Unit) Dksdez A Dqyjpfx Ap Dju

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. Dodpfxex S Etmj Ap Dsku > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: good (used), Mobile shelving / sliding shelving system DEXION Manufacturer: DEXION Number of shelving units: 3 double-sided, 1 single-sided Permissible shelf load / floor load: 235 kg (91 kg on average) Permissible field load: 730 kg Dedpfx Ajzt Rpgjp Dsku Maximum cart load: 5,840 kg Number of shelves stacked on top of each other: 8 units Evenly distributed permissible load

Condition: as good as new (ex-display), Year of construction: 2025, Special price *available upon request New: With the frequency converter option, up to 45% state funding is possible. Combination of: mütek briquetting press MPP 60 + extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected to each other 1. Technical data of briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Dksdpfx Aod Su Hxep Dsu Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery in 2 components possible Weight: approx. 1200 kg Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option cooling press clamp: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data of clean air extraction unit MMJET 350: Extraction port diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: used, Year of construction: 2004, Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Technical data Dodpfjz A S Ndsx Ap Dsku Dust extraction hood with ionization and rotating fan Length: 3500 mm Usable width: 1300 mm Overall width: 1579 mm Working height: 860 - 940 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Refrigerant compressors system Bitzer -Type: 6G-40.2Y-40P (x5) -Volume: 126.8 m3/h (x5) -Cooling capacity for R404A: 513 kW at 0°C/40°C, 427 kW at -5°C/40°C, 351.5 kW at -10°C/40°C, 181.5 kW at -25°C/40°C -Dimensions: 3100 x 840 x 1950 mm -Tank dimensions: 1400 x 930 x 2780 mm -Items in magazine: 1 -Reference number: Z136 -Condition: Used, ready to work Dkodpfx Apoz A R E Rs Dju

Condition: good (used), Technical data for the pallet racking system: Dsdpfez Dglvjx Ap Dsku Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 30,400 mm Number of bays / racking row: 09 units, each 3,600 mm Number of levels including base level: 02 units Technical data for volume: Pallet spaces per bay: 12 units Pallet spaces per racking row: 108 units Total pallet spaces: 108 units Based on: Load handling unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 600 kg Included in the scope of supply: 10x Pallet racking uprights, used Frame material color: RAL 5015 blue Brace material color: sendzimir galvanized Frame profile: PLFB 155 Profile dimensions: P 100 x 65 x 2.25 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 3,100 mm Depth: 1,100 mm 36x Pallet racking beam, new Material color: RAL 2004 orange Box profile: 140 x 50 mm Beam type: PNB0414|2 Agraffe: 4 HK (hooks) Clear width: 3,600 mm Max. load per beam pair 2,400 kg with evenly distributed load 72x Locking pin, new Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting 40x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2019, operating hours: 100 h, functionality: fully functional, type of input current: AC, input voltage: 220 V, input frequency: 50 Hz, TESA TESATRONIC TT20 Measuring System with GT-31 Probe The item for sale is a used TESA TESATRONIC TT20 electronic measuring system supplied with a TESA GT-31 lever-type inductive probe. The TT20 is designed for use with one or two TESA inductive probes. It supports individual measurements as well as sum and difference measurements, making it suitable for dimensional inspection, production control, workshop applications and metrology laboratories. PRODUCT IDENTIFICATION • Manufacturer: TESA Technology / TESA SA • Model: TESATRONIC TT20 • Display unit order number / Type No.: 04430009 • Probe model: TESA GT-31 Gage Head, 10P • Probe part number: 32.10802 • Country of manufacture: Switzerland • Applicable standard: DIN 32876, Part 1 • Number of probe inputs: 2 – channels A and B TT20 TECHNICAL SPECIFICATIONS • Number of measuring ranges: 7 • Minimum selectable measuring range: ±5 µm • Maximum selectable measuring range: ±5000 µm • Display resolution: 0.1 µm • Measurement modes: channel A, channel B, sum and difference • Units: metric and inch • Range selection: manual or automatic according to the measured value • Response time of the analogue, digital and LED classification displays: ≤80 ms • Digital display holding time: 80 ms DISPLAY • Combined digital and pseudo-analogue LCD indication • LCD dimensions: 126 × 62 mm • Numerical display: 6 digits plus “+” or “–” sign • Digit dimensions: 12.5 × 6.6 mm • Pseudo-analogue scale length: 110 mm • Number of analogue scale divisions: 50 • Selectable pointer or bar-graph indication FUNCTIONS • Two probe inputs for single, sum and difference measurements • Manual or automatic measuring-range selection • Direct conversion between metric and inch units • Separate controls for each measuring channel • Programmable tolerance limits • Three-class value classification • Coloured LED tolerance indication with signal outputs • HOLD function for step-by-step measurement routines • Automatic recognition of compatible TESA probes manufactured from 1997 onwards • Bidirectional, opto-isolated RS-232 output • D-Sub In/Out connector • Power supply through an external mains adapter CATALOGUE DISPLAY VALUE LIMITS The following catalogue values apply at a temperature of 20°C and relative humidity of no more than 50%: • Analogue display: 2% • Digital display: 0.3% • Digital output: 0.3% These values refer to the TT20 display unit specification. They are not a current calibration result or a guaranteed accuracy value for this particular used set. DIMENSIONS AND CONSTRUCTION • Dimensions: 255 × 235 × 120 mm • Dimensions are specified as width × depth × height • Housing material: resistant plastic • Installation: benchtop workshop or laboratory use CONDITION Dsdpfowq Dp Dex Ap Deku Used equipment with visible signs of normal use and storage. The unit powers on, and the display and indicator lights operate as shown in the photographs. The display currently shows a selected measuring range of ±2000 µm. This is one of the available ranges and not the maximum capability of the TT20. The unit has not been subjected to a complete laboratory performance test. No current calibration or verification certificate is included. PACKAGE CONTENTS • TESA TESATRONIC TT20 display unit, Type No. 04430009 • TESA GT-31 lever-type probe, part number 32.10802, marked 10P • Connected cables shown in the photographs

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Dksdpfx Apjw Nxyyj Dsu Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central fume extraction system Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62187 Year of construction 2014 Nominal volume flow 3000 m³/h Nominal volume flow 50 m³/sec Filter area 27 m² (9 pieces, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Dkedpfx Apoz Db Nis Dsu Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control - Control cabinet mounted on the extraction system - 9 filter cartridges, Type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter replacement - Radial fan installed on the top inside, Type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Firewater connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: as good as new (ex-display), Heidenhain ULS 300/0020 (28468) Length scale : 270 mm ID.NO.239 740-02 serial number 10 298 353 B A3 Dkodpfx Apor Ar Ddj Dju unused, in opened original packaging

Year of construction: 2014, condition: as good as new (ex-display), Zero-point clamping system Manufacturer: AMF Type: 302828-K 20 Diameter: 110 mm Dksdpfx Apef Dx R Us Deu

Condition: excellent (used), Micrometer make Hommel Precision Measuring range 175 - 200 mm diameter (2852) Test gauge in wooden storage case Dsdstt Nugepfx Ap Doku

Condition: excellent (used), Technical data for the pallet racking system: Racking system: Jungheinrich Type: MPB Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 9,780 mm Number of bays / racking row: 3, each 3,100 mm Number of levels including base level: 4 Included in the scope of delivery: Dkodpfx Apez Dvmco Dou 04x Used pallet racking uprights Material color frame profile: hot-dip galvanized Material color truss: Sendzimir galvanized Upright type: STD´B´28 Profile dimensions: 120 x 65.5 x 2.5 mm Incl. cross and diagonal bracing, upright protectors and base plates The uprights are pre-assembled (bolted truss) Height: 6,500 mm Depth: 1,100 mm Note: Steel grade S420MC is better than S355MC 24x New pallet racking beams Material color: RAL 1007 daffodil yellow Box profile: 160 x 50 x 1.75 mm Beam type: AUF´B´E0436 Grapple: 4 hooks Clear width: 3,100 mm 48x New locking pins Material color: Sendzimir galvanized For securing the longitudinal supports against unintentional lifting out 16x New bolt anchors Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 08x Used shims Design: fully galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7x-1245., overall weight: 10 kg, Equipment: documentation/manual, type plate available, Proliner 7x device, serial number 7x-1245. Condition: used, like new, complete set. Year of manufacture: November 2023. 1 owner. The device was used for measuring glass wall cladding. Includes tripod, template attachments, backpack, remote control, wheels for moving the device, 2 batteries, and a charger. Net price negotiable, call 795503436. Dsdpfx Apsz D Abto Djku

Condition: excellent (used), Year of construction: 2010, Duplo System 5000 PRO Year of manufacture: 2011 Counter: approx. 700,000 • Brochure production machine Dodez D H N Iepfx Ap Doku • DSF-2000 digital feeder • SCC unit (scoring, head and foot trimming) • System 5000 PRO stitching unit • System 5000 trimmer (front trimming) • LS1 long delivery conveyor Location: Germany Immediately available

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables Dksdpfoy Akpzjx Ap Dsu • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Dkjdpez D Uyuefx Ap Dsu Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: excellent (used), The VAC-7HS abrasive recovery system is an electrically powered vacuum abrasive recovery system specifically designed for use with mineral abrasives, which typically generate more dust. The VAC-7HS abrasive recovery system is equipped with a particularly powerful side-channel blower, an integrated, high-performance cartridge filter with pulse-jet cleaning, a separate dust pre-separator SC-500 with manual emptying, and a 0.3 m3 open-air filter. It also includes a stationary storage silo for manual refilling of the blasting pot (manual shut-off valve), a bottom hopper, and suction hoses. The VAC-7HS abrasive recovery system can be used universally for recycling for further reuse or for a big bag filling station for the disposal of the mineral abrasive. Dkjdpfxozarybj Ap Deu

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, ZEISS GOM ATOS Q Professional 8M – 8M 3D Scanner + MV170/MV350 + ROT350 – Like New _____ For sale is a GOM ATOS Q Professional 8M optical 3D measuring and scanning system, purchased new in 2021. Complete system includes: • GOM ATOS Q Professional 8M 3D scanner • 8 MP camera system • MV170 measuring volume • MV350 measuring volume • GOM ROT 350 rotary table • Calibration equipment and calibration panel • Original GOM mobile stand with adjustable sensor arm • GOM software with license dongle • System backup • Original GOM documentation and manuals • Original calibration / acceptance documentation • Connection cables and accessories shown in the pictures  The system can be inspected and demonstrated in operation by appointment. The system is in excellent, like-new condition and has seen extremely little use. It was used only a few times for the dimensional inspection of small precision medical plates/components. The system was purchased new and has remained in a professional quality-control environment at a high-precision CNC manufacturing company. The ATOS Q is a professional optical 3D measuring system designed for high-precision dimensional inspection, quality control, CAD comparison, first article inspection and reverse engineering. Due to its extremely limited use, the complete system is in excellent condition and is practically like new. • Year: 2021 • Condition: Extremely low usage - like new – used only a few times for dimensional inspection of small precision components. Djdpfx Apoz D E Ene Doku • Location: Trnovec Bartolovecki, 42202, Croatia • Availability: Immediately • Price: price on request Additional photographs, documentation and technical information are available upon request. Original purchase documentation is available. Manufacturer: GOM GmbH / ZEISS Model: ATOS Q Professional 8M Type: Industrial optical 3D measuring / scanning system

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm 3D printer SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder Dodeu N Auuepfx Ap Doku div. small parts *

Year of construction: 2015, condition: good (used), machine/vehicle number: 31650, Used cleaning machine Make: MTM Type: RoJet Dodpfsv Htn Ajx Ap Doku Year of manufacture: 2015

Condition: used, Year of construction: 2001, functionality: fully functional, P3 foam cleaning system for rinsing and filling machines Pumps and valves Dkedpfx Asww Hnvep Dju Attached stainless steel cabinet with Siemens S7 control system Special price due to stock clearance: €4,200