Used Esko Label - Prepress for sale (1,569)

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Pjdsyga Utjpfx Aphegr Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: used, mileage: 3,42,000 km, power: 210 kW (285.52 HP), first registration: 07/2019, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2015, color: white, gearing type: automatic, emission class: euro6, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, VEHICLE HISTORY * GERMAN VEHICLE * FROM 1ST OWNER * VIDEO AVAILABLE ON REQUEST * IMMEDIATELY READY FOR USE VEHICLE EQUIPMENT * THERMO-KING T1200R-50 SPECTRUM * FOLDABLE TAIL LIFT * AUTOMATIC TRANSMISSION * LANE ASSIST * BRAKE ASSIST * HILL START ASSIST * ROCKING MODULE ASSIST * ENGINE BRAKE * CRUISE CONTROL * MULTIFUNCTION STEERING WHEEL * AIR CONDITIONING * SEAT HEATING * PARTIAL LEATHER * BODY: KIESLING BOX BODY * THERMO-KING T1200R-50 SPECTRUM * PARTITION WALL Pgodpfex Tbzpjx Apher * TAIL LIFT: BÄR 1.5 TON * WHEELBASE: APPROX. 5.60M * LOADING AREA: * LENGTH: 8.20M * WIDTH: 2.50M * HEIGHT: 2.30M * GROSS WEIGHT: 16,000KG * EMPTY WEIGHT: 8,970KG * PAYLOAD: 7,030KG * FRONT AXLE: SPRING SUSPENSION-285/70 R19.5 * REAR AXLE: AIR SUSPENSION-285/70 R19.5 * 1X DIESEL TANK * 1X ADBLUE TANK * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATE AND 17 - 21 DAYS AUSTRIAN LICENSE PLATE EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500.00 / €5,000.00 is required PLEASE NOTE THAT FOR SOME VEHICLES, LABELS/MARKINGS MAY BE REMOVED WITH PHOTOSHOP Subject to changes, mistakes and prior sale! You can find more vehicles on our homepage: Sale takes place exclusively according to our terms and conditions – see homepage Important notice – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is given without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. The details provided here are given without guarantee and do not constitute warranted characteristics.

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Magni RTH6.26 rotating telescopic handler, 6t, 25.8m The 6.26 is extremely versatile, as it can be used as a telescopic handler with forks, as an all-terrain crane with a winch, and as an aerial work platform with a basket simply by changing the attachment. Furthermore, thanks to the RFID system, the machine recognizes the attachment and automatically sets the corresponding safety devices and the associated load chart. The cab, with its Stage 2 ROPS/FOPS certification, ensures the highest level of safety during all work phases. Outriggers: Telescopic scissor outriggers Lifting capacity: 6000 kg Maximum height capacity: 3500 kg Lifting height: 25.8 m Maximum reach: 22.2 m Engine: Deutz TCD 3.6 L4 HT Stage V Rated power: 100kW, 136hp, 2200 rpm Hydraulic flow rate: 130 l/min Number of gears: 2 Hydraulic system: 350 bar Load sensing Length: 7.7 m Width: 2.5 m Ground clearance: 33 cm Empty weight: 19600 kg Speed: 20 km/h Rotation: 360° continuous Standard air conditioning: Yes Automatic attachment recognition: Yes Errors and prior sale are subject to change. Internal vehicle number: R66 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. Pgodpfoxmqyrex Aphsr WhatsApp WhatsApp

Condition: like new (used), functionality: fully functional, This type of machine belongs to the group of linear industrial labelling machines. This type of machinery is particularly suitable for cylindrical and flat containers, depending on requirements. - Production output may vary depending on the container. Pgodpfsynkm Aex Aphor Features: - Maximum reel diameter: 220 mm. - Minimum mandrel diameter: 40 mm. - 8 cm PVC hinge conveyor belt.

Condition: like new (used), Features: * Linear machine designed for applying front and back labels on glass jars of various shapes and sizes (rectangular, cylindrical, and oval). * Suitable for full or empty containers. * Up to 2 labels per container. * Partial or wrap-around labels (on cylindrical containers). * Opaque or transparent labels. * Stainless steel safety cabinet. * Maximum label height: 150 mm. * Minimum label height: 10 mm. * Includes 2 ETIMA unwinders, model: DAD-200. * Max. output: 15,000 containers/hour. * Min. output: 5,000 containers/hour (83 containers/min). * Output may vary depending on the container. Pgsdsyn Hddepfx Aphjr

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data - Capacity: up to 25,000 bph Scope of Delivery  Pedpfx Ajwhw Sgophogr - Fill level and closure inspection system | KHS - Label inspection system | Indspect

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 Podpfxowh U Avo Aphsgr - Pack labelling: Contact 100, self-adhesive label from reel

Condition: excellent (used), Year of construction: 2007, Filling and Packaging Line for 50 ml Vials 1. Vial Loading Machine: Rotary Table, SSS Conveying Technology, year of construction 2007 Pgsdpfoxb Uptsx Aphor Empty or already filled and sealed 50 ml vials are manually placed onto a rotary table. From there, they are individually transferred onto the conveyor belt and continue down the line. 2. Labelling with Print and Camera Inspection Machine: Pago System 520, year of construction 2007 Printing system: Domino 320i thermal transfer printer Camera system: Cognex (integrated into Pago) The vials are labelled with self-adhesive labels. During the labelling process, batch number, expiry date etc. are printed directly onto the label via thermal transfer (Domino). At the same time, a camera-based inspection (Cognex) checks the printed data. Inspection results are displayed on an integrated screen. The print and camera systems are fully integrated into the Pago labelling machine. 3. Change of Vial Orientation (vertical to horizontal) Machine: FlexLink Conveyor XH, SSS Conveying Technology, year of construction 2016 Labelled vials are repositioned horizontally by a bottle turner to prepare them for insertion into the cartoner. 4. Cartoning with Leaflet Feeding Machine: MK-120, Harro Höfliger, year of construction 2007 Pre-formed folding cartons are erected automatically in the cartoner. At the same time, a leaflet is folded and provided via a GUK folding machine. One 50 ml vial and one leaflet are automatically inserted into each folding carton. In the configuration shown here, the carton bottom is glued with hotmelt and the top is closed with a tuck-in flap. Optionally, it can be converted (using existing format parts) to double tuck-in flaps without gluing. 5. Serialization and Camera Inspection Machine: Laetus PrintSpect TTS MV-70, year of construction 2015 After the cartoner, the folding cartons are printed with serial numbers and variable data (thermal transfer) and fully inspected by a Laetus camera system. This station was added in 2015. The Harro Höfliger MK-120 also features an integrated Wölke print system, which is not used here. 6. Tamper-Evident Labelling Machine: Pago System, year of construction 2007 The serialized folding cartons are sealed on the flap sides with tamper-evident labels. To do this, the cartons are precisely aligned and guided via a side belt. 7. Case Packing Machine: IMA CP18BA Case Packer, year of construction 2007 The finished individual packages are pneumatically pushed into shipping cartons (cases). The case packer seals the shipping cartons with hotmelt. 8. Final Labelling of Shipping Cartons Machine: Laetus VL4 C2 ICMV Cabinet + Pago labeller, year of construction 2015 The finished shipping cartons are labelled using thermal transfer printing. No camera inspection takes place at this station. This unit is exclusively for labelling shipping cartons (no serialization or aggregation). 9. Check Weighing (optional) A manual checkweigher is also available, but not included in the scope of supply and was only used for internal final checks. System available from Jan. 2026. Further information to follow.

Condition: used, mileage: 4,45,000 km, power: 220 kW (299.12 HP), first registration: 06/2018, fuel type: diesel, number of seats: 39, gearing type: automatic, next inspection (TÜV): 04/2026, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), Our internal vehicle number: 1101 Mercedes-Benz Citaro C2 Power output: 220 kW Emission standard: Euro 6C Type: City bus Pjdpfoxb Iimsx Aphegr Vehicle class: M3 First registration: 06/2018 Mileage: Original. * ZF automatic transmission D/N/R * 39+1 seats * 65 standing places * LAWO destination display front/side/rear/side with control unit * Electric sunblind * Air conditioning * Radio * Camera system / video surveillance * Folding ramp * Large multi-purpose area – for wheelchair or stroller * Convector heating * Double glazing * 2 folding windows installed * Original mileage * Vehicle is decal-labeled – film-coated * Vehicle is sold without passenger information screen (LAWO Slave 18.5") and ProSys box * Ex works price Note: Vehicle is registered – mileage and condition may vary Customer is responsible for independently inspecting the condition and equipment of goods/vehicle! All information is provided without guarantee Subject to prior sale See our general terms and conditions (AGB)

Condition: excellent (used), Year of construction: 2008, 123 USED Koenig LAURIN 1000/800 + Mini Rex Futura Line. The line has been overhauled at a Koenig dealership and is ready for operation. TECHNICAL DATA: - Dividing and rounding weight: 25-130 g, - Bread types: round and elongated rolls, - Throughput: 2000-3000 pcs/h, - Sheet stacking: 60x80, 60x100, and 80x100. LABELLING AND STAMPING: - Kaiser roll - Sliced ​​roll (Schnytka) - Poznań roll - Daisy roll EXTERNAL DIMENSIONS (in cm): Podpfjw Su Dmjx Aphjgr - height 180, - length 328 (with table open: 383), - width 153 (with the board flap open: 191) The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices.

Condition: used, mileage: 3,29,200 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 11/1996, loading space width: 2,300 mm, emission class: euro2, color: blue, number of seats: 2, total length: 8,100 mm, total width: 2,320 mm, total height: 2,460 mm, Equipment: ABS, * Mercedes Benz 817 with aluminum towing structure - 2 seats - trailer hitch - leaf / leaf - * Diesel - displacement: 4,249 cc - 125 KW / 180 HP - Euro 2 - red sticker - Pedpfx Asxgla Tephegr * Body dimensions: length 6.10 m x width 2.300 m x height m - 6-speed manual transmission * Electric cable winch - can be moved sideways - with radio & cable control - * Permissible total weight: 7,490 kg - Empty weight: 4,135 kg - Payload: 3,355 kg - * Vehicle immediately available and ready for collection - Vehicle is labeled - Wheelbase XXXX m - * Please make an appointment to view - * Contact person: Mr. Andreas Vogel * The information provided on the Internet is non-binding descriptions. * They do not represent guaranteed properties. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors and prior sale. Special equipment: Manual window lifter, 12V / 15 A socket in the dashboard, side underrun protection. Other equipment: Emissions standard EURO 2, axle configuration: 4x2, 6-speed manual transmission, seat cover / upholstery: fabric, seats in the driver's cab: single passenger seat, fixed, permissible total weight 7.49 t

Condition: used, Length (retracted): 8800 mm Length (extended): 27300 mm Band width: 800 mm Type: MR3185-800 Pjdpfx Apsglanzjhegr

Year of construction: 2026, condition: new, ProfiStop Lazer is a simple, no frills saw measurement solution for light-duty industrial applications. High speed, high accuracy cutting production cut, after cut, after cut. • Fast and high-accuracy automatic servo motor cut measuring • Simple to use and setup, compatible with most saws / drills • Light duty 10-20 kg recommended material weight • Ideal for aluminium, softwood or light steel • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Kitchens and wardrobes manufacture • Stairs and banisters manufacture • Furniture manufacture • Windows and doors manufacture • Woodcraft manufacture Can be used with all your existing saws including: • Mitre drop saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Pgsdpfx Apjf Dp Dhehor Model: ProfiStop Lazer Length: 3 m Stroke: 2674 mm Pushing capacity: 10-20 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, Sensor, write head, read head, write-read head, read-labeling station Pgjdouz H Uiopfx Aphjr -Manufacturer: Siemens, Moby-M reading and labeling station LBS-32 Ovp -Type: 6AW5454-8BH -Dimensions box: 150/40/H40 mm -Weight: 0.2 kg

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST Podpfevrfivjx Aphegr - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  - Capacity: Max 6,000 b/h - Formats: - 0.210L, - 0.355L, - 0.500L glass bottles - 26mm metal crown caps - Dimensions: - Width: 5,300 mm - Depth: 2,630 mm - Height: 2,860 mm - Weight: 8,000 kg - POWER SUPPLY: - Main: 460V – 60Hz – 3F+N+T - Auxiliary: 24V DC - Machine main motor: 4 kW - Installed power: 9 kW Pgedpfx Asvm U Dlopher Scope of Delivery  - Triblock (rinser, filler, and capper) - Selfadhesive Labeller with 2 stations - Conveyors

Condition: ready for operation (used), Year of construction: 2007, The subject of my auction is a Telescopic Conveyor by Caljan At other auctions many other feeders I invite you Psdev Erktspfx Aphsgr Possibility of transport. Possibility of transports.

Condition: new, bending length: 3050total power requirements: 15pressure: 200number of axes: 3messurements (LxWxH): 3680x1350x2500oil filling: 210weight approx.: 8500 Press Brake Control Unit : Esa S 630 Cnc 10 2d Graphical Screen - Touchscreen Control Unit Panel : Swivel Pendant Arm Hydraulic Press Brake Valve Option : With Ce Safety Signals Press Brake Safety Plc : Mcs Plc Safety Plc Press Brake Laser Safety System : Dsp-Ap Safety Block Laser Manual Height Adjustment) Psdpfjhutz Isx Aphegr Press Brake Back Gauge : X Axis, 500 Mm Range, Including 2 Fingers, Manually Adjustable In Height And In Lateralposition. Press Brake Finger For Back Gauge : Standard Xf Arka Ve Yan Muhafazalar : Var (Ce'Li Model) Press Brake Top Tool Clamping : Manual European Type L:150 Mm (Promecam) Press Brake Top Tool : Eurostamp 1260 / Standard (835 Mm And 805 Mm Sectioned To 595 Mm And 210 Mm ) Press Brake Bottom Die Holder : Mechanical European Type Standard Width (Promecam) Press Brake Crowning : Cnc Adjustable Motorized Crowning (V-Axis) Press Brake Bottom Die : Eurostamp 2067 / Standard (835 Mm And 805 Mm Sectioned To 100 Mm Lh, 395mm, 210 Mm And 100 Mm Rh) Press Brake Front Support : Xf Ön Destek Press Brake Front Support Number : 2 Pcs Support, Manually Adjustable In Height And Inlateralposition. Electrical System : 380 V-660 V, 50-60 Hz, 3 Ph ( I E 3 ) Electric Cabinet Cooling System : Air Ventilation With Fan Number Of Foot Pedal : One Label Group : Label Group English Packaging Method : Plastic Cover With Strech Flim

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line.  Technical details - Capacity: 9000 containers/h (varies according to bottle volume and product).  - Container  - Max. Diameter: 100mm  - Max. Height: 300mm  - Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  - Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted - Positronic control system for optimal adaptation to downstream filler - Machine, completely internally wired with attached control cabinet in mild steel, painted - Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK - Fully automatic rotary filler - Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS - Number of filling stations: 16 filling stations - Filling valve diameter: Ø12mm - Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm - Fully automatic round capper - Number of capping heads: 5 - With torque adjustment via slip clutches - With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator - With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 - Applied safety and machinery directives CE compliant - Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation - Force shunt free current transfer at the load cell - Front protection to reduce interference on the weighing result - Stainless steel control cabinet Pgsdpjmfqm Defx Aphjr - Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution - Flexible operability due to tiltable stainless steel operator terminal - Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  - Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III - Tandem design - Max. Label height: 120mm  - Photocell for label scanning - 2 x automatic winding station incl. counter pressure plate - Mounting device with height adjustment for lateral label dispensers - With adjustable side guides - passage width up to 150mm

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE Pgjdpfx Apjquuv Ishor MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. S/N: 032M44045 Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Condition: very good Pgedjrtq I Eepfx Apher The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,000 kg, lifting height: 4,095 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3518T – the versatile farm loader with a telescopic boom for demanding tasks Benefits of the H&R 3518T Wheel Loader with a telescopic boom Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, and a rearview camera, as well as heating and ventilation. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518T Telehandler • Fully equipped • Extendable telescopic arm for greater reach • Includes standard shovel (190 cm) and pallet fork • Powerful and versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V cooling water preheating for reliable cold start capability and increased engine life. Pgodpsulac Tefx Aphjr • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €28,660.00 VAT: €5,445.40 Gross: €34,105.40 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting capacity: 1800 kg Lift height: 4095 mm (bottom edge of standard pallet fork) Unloading height: 3451 mm (standard bucket tipped out) Wheelbase: 2272 mm Tires: 20.5-70 R16 Dimensions: 4890 x 1870 x 2570 mm Weight: 4220 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Pgodpjdy Hrdsfx Aphor Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, For sale: SMAG E-CUT S 330, a robust, versatile, and high-productivity roll-to-roll label finishing system. Designed for digital and conventional printing lines seeking flexibility, precision, and premium value-added finishes. This equipment is ideal as a complement to digital presses, enabling lamination, die-cutting, slitting, and rewinding in a single workflow. Psdpfxsyapy Eo Aphegr -> General data: - Model: E-CUT S 330 - Year of manufacture: August 2012 - First installation: February 2013 - Maximum web width: 330 mm - Maximum unwind roll diameter: 700 mm - Maximum speed: up to 35 m/min -> Configuration and Units: - Unwinder with ultrasonic web guide - Fully rotating flexo station - Lamination unit - Semi-rotary die-cutting with Z 160 magnetic cylinder - K&B GapMaster for precise adjustments - Corona treatment for improved adhesion - Longitudinal slitting unit with up to 10 knives - 2 rewinders - Matrix rewinder -> UV System: In 2017, an air-cooled Phoseon UV-LED lamp was installed, improving energy efficiency and reducing maintenance. -> Key strengths: - High industrial productivity and reliability - Great versatility for both digital and flexo jobs - Precise and stable die-cutting - Ready for a wide range of materials - Ideal for short to medium runs with quick job changeovers -> Equipment condition: - Machine in good working order, well-maintained and operational. - Available for inspection and testing without obligation. Reason for sale: Restructuring / change in production strategy.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, color channels: CMYK, resolution (max.): 2,400 dpi, paper weight (min.): 50 g/m², paper weight (max.): 350 g/m², paper width (min.): 210 mm, paper width (max.): 330 mm, total length: 1,400 mm, total width: 855 mm, total height: 1,000 mm, type of input current: AC, input voltage: 220 V, For sale: Valloy BizPress 13R, a compact digital press for roll-to-roll label printing, highly productive and designed for print shops and converters seeking professional quality, flexibility, and fast return on investment in short to medium runs. This solution is ideal for personalization, variable data, prototypes, and short series, with no plate costs and virtually instant job changes. The machine is in excellent condition, fully operational, and properly maintained. Viewings while in operation are available without obligation. Reason for sale: reorganization / change in production strategy. -> Key features: - Digital LED toner printing technology (CMYK) - Optional CMYW / white configuration - Resolution up to 1,200 × 2,400 dpi - Constant production speed up to 7.26 m/min - Material width from 210 to 330 mm - Maximum print width: 304 mm - Image repeat up to 1,200 mm - Maximum roll diameter: 450 mm - Substrate thickness: 50 to 350 microns - Quick job changeover, no plates required - Eye-mark sensor - Automatic tension control - Anti-static system and substrate cooling - Excellent color stability and definition - Ideal for variable data printing and customization -> Compatible materials: - Self-adhesive papers (matte, gloss, kraft, etc.) - Plastic films: PP, PET, PVC - Special and synthetic materials -> Electrical and physical data: - Dimensions approx.: 1,400 × 855 × 1,000 mm - Weight approx.: 350 kg Pgedjy Rna Hopfx Aphsr - Power supply: 220–240 V / 50–60 Hz - Power consumption: approx. 3 kW