Used Field Distributor for sale (2,055)

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Fsdpfxjzii Awe Af Sjgd We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Model: VTS 7018-5 Water-cooled Temperature Test Chamber System retrofitted with R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Fgodpfsziixxex Af Sjd Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10.0 kW, Rated current: 21 A Main fuse (on-site): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69dB (A) Side port: 50 mm / 125 mm Chamber is water-cooled Refrigerants: R-452A and R 23 Weight approx. 460 kg For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data may be subject to change or error!) If you have any further questions, we will be happy to answer them by phone.

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for Multi-Layer Thickness Measurement Fsdpfsziiw Uex Af Sogd For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, designed for precise, non-contact measurement of multi-layer materials such as plastic films, composites, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industries. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate layer thickness measurement Measuring method: A-Scan / optical interference analysis Channel: 1 (CH1) Fields of application: Inline measurement in production lines or for laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (see image) Sensor multi-Thick-MS1-CH1 Connection cable (Subject to changes and errors in technical data. All information is provided without guarantee!) If you have any further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Fsdpfovvi Nbex Af Sogd Storage location: Nattheim

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Fgedpsvvi Spofx Af Sed Storage location: Nattheim

Condition: used, Year of construction: 2011, Overview This Paxona line distributor for trays was manufactured in 2011 and is designed to divide a single infeed lane into two parallel lanes. The system is typically used in packaging or conveying lines to distribute trays efficiently to downstream machines such as packers, fillers, or palletizing systems. With less than 5,000 operating hours, the unit has seen comparatively low usage and represents a well-preserved solution for line balancing and product distribution. Paxona equipment is known for robust construction and reliable integration into automated production and packaging environments. The distributor is suitable for tray handling applications where a stable and controlled product flow from a single lane to two parallel lanes is required. Technical Data  - Manufacturer: Paxona - Machine type: Tray line distributor / lane divider - Function: Distribution from 1 lane to 2 lanes Fedpeythxaofx Af Ssgd - Year of manufacture: 2011 - Operating hours: < 5,000 h - Application: Tray conveying and line distribution - Condition: Used, low operating hours, store

Condition: used, Year of construction: 2022, Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data - Application: Sparkling wine (glass bottles) - Capacity: Fjdpjyb Tf Iofx Af Segd - Up to 4,500 bph - Formats & Speeds: - 0.187 L: 4,500 bph (4°C & 15°C) - 0.375 L: 4,500 bph (4°C & 15°C) - 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) - 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) - Operating hours: 2,100 Scope of Delivery  - Depalletizer | DUETTI | M Automatic | 2022 | — - Rinser–Filler–Capper Monoblock | GAI | 4033 (16 rinser valves / 24 filler valves / 3×3 capping heads) | 2022 | Isobaric - Automatic CIP System | WIN&TECH | — | 2022 | — - Microfiltration Pallets (x2) | WIN&TECH | — | 2022 | — - Wirehooder | ROBINO & GALANDRINO | REKORD 6 | 2022 | — - Level & Cap Inspector | CMP | — | 2022 | — - Capsule Distributor & Monoblock | ROBINO & GALANDRINO | ZENITH F 3/18 | 2022 | — - Adhesive Labeller | MAKRO | 4 Stations | 2022 | — - Bottle Conveyors | — | — | 2022 | Included

Condition: used, Year of construction: 2019, Overview  The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Fodsxb Uniepfx Af Ssgd Technical data  - Filling points: 2 - Filling valve diameter:  mm - Suitable for filling highly viscous media - Fields of application: food, beverage, pharmaceutical and chemical industry

Condition: used, Year of construction: 2016, Overview  This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data  - Formats: Flat 38 mm plastic caps - Dimensions: L 210 cm × W 75 cm × H 300 cm Fgodpsw T S Raefx Af Ssd - Power supply: 0.2 kW - Application: PET bottles Scope of Delivery - Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 - Centrifugal distributor | Sacmi | - | 1997 - Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  - Capacity: 9,000 – 12,000 bottles per hour - Formats: 75cl glass bottles (cider, champagne type) - Dimensions: L 200 cm × W 150 cm × H 250 cm - Application: Cone application (distributor, oven, spinner) Scope of Delivery  - Cone distributor Fjdpfxowhkywj Af Sjgd - Cone oven - Cone spinner - Operator platforms

Condition: used, Year of construction: 2013, lifting height: 88,000 mm, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 47.700 kg Functional Lifting capacity: 530 kg Working height: 9.000 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 3290 m Transport dimensions (LxWxH): 16,35x2,55x4,01 Additional information Please contact Christian Theißen for more information Manufacturer: Palfinger Model: P 900 Year of build: 2013 Condition: Used Data: Max. working height: 90,00 m Max. platform height: 88,00 m Max. reach: 32,90 m Total dimensions LxWxH: 16,35 x 2,55 x 4,01 m Platform dimensions LxW: 3,45* x 0,96 m Max. basket load: 530 kg Swivel range: 540° Fgodpfxswx Ny Rs Af Ssd Ground pressure: 345 kN Ground clearance: 0,22 m Own weight: 47.400 kg Support width one side: 7,45 / 7,46 m Support width both sides: 8,30 / 8,15 m Support length: 8,70 m Special features: Swivel work basket 2 x 84°, Basket arm rotation angle 164°, Loading area with side walls, *telescopic then 2.25m, generator 4 KVA/230 V Information: TÜV and UVV new

Condition: new, mileage: 10 km, power: 128.71 kW (175.00 HP), fuel type: diesel, empty load weight: 3,490 kg, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, emission class: euro6e, suspension: steel, number of seats: 3, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, fog lights, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, truck registration, Model: Mitsubishi Fuso Canter Fgsdpfszk Ei Nox Af Ssd Vehicle Type: 7C18 Design Type: 46925512 Vehicle Category: Chassis Engine Power: 129 kW (175 hp) Wheelbase: 3400 mm Permissible Total Weight: 7490 kg Paintwork: MB 0400 natural white OM5 engine version, Euro VI OBD Step E, Canter * Engine, start/stop system VA6 manual throttle control for engine speed VB1 bracket and installation of manual throttle control Clutch & Transmission * Manual gearbox NQ7 gearbox PTO, 200 Nm, for hydraulic pump Axles & Suspension A86 limited slip differential * Axle ratio i = 4.875 * Stabilizer bar, front axle Wheels & Tires RN2 steel rim 17.5 x 6.00 * Valve extension for dual tires * Wheel center caps (plastic) * Spare wheel holder, simply secured * Fuel tank, plastic * Tire pressure monitoring system * Active Brake Assist 6 * Spare wheel/spare wheel rim Frame & Frame Components * Chassis ladder frame, reinforced CR8 body brackets on the vehicle frame K04 spacer for fuel tank * Main tank 100 liters * Bumper, 3-piece (plastic/steel) CO8 rear underrun protection with trailer coupling Braking System * Electronic Stability Program (ESP) * Disc brake on front and rear axle with electronic wear indicator * ABS with electronic brake force distribution Cab Exterior * Comfort single cab * Cab, tiltable F62 rearview mirrors, heated VB5 long mirror holder incl. wide-angle mirror * Central locking, with smart key * Immobilizer, with transponder Cab Interior * Armrest, driver's seat SH6 driver's comfort suspension seat, horizontal suspension * Co-driver seat, 2-seater * Warning system for seat belts * Isringhausen seats, fabric black * Steering column bracket adjustable in height and inclination * Multifunction steering wheel SA5 airbag, driver * Floor covering vinyl * Sun visor, driver and co-driver side (in the cab) * Window lift for driver/co-driver door, electric LCD combination instrument unit * Tachograph, digital 4.1 (2 drivers) Speedometer (mph and km/h) * Vehicle Cyber Security JW0 reversing warning * Reversing camera * Interface for breathalyzer * Touchscreen DAB radio (6.95"), Apple CarPlay, Android * Operating voltage basic vehicle, 12V * Emergency brake light H03 air conditioning * Storage compartment above windshield, 1 compartment * Step (handle) on driver and co-driver side EE9 vehicle battery reinforced, 2x100Ah (2 batteries) OT6 battery cover, dual OV2 preparation for battery disconnect relay 12V * LED daytime running lights * Fog lights LED LH9 LED headlights Outline lights (according to ECE R7) * Side turn signals * Automatic lighting with light sensor * High beam assistant (Intelligent Headlight Control) * Speed limiter 90 km/h, EC * Front protection assistant * Intelligent speed assistant * Attention assistant * Blind spot assistant * Emergency braking assistance system (AEBS) * Lane departure warning system (LDWS) Hook Marcel AL4 Fassi Group EQUIPMENT Container protection: hydraulics internal Hydraulic distributor Hydraulic pump Oil tank Wide rollers ensure the stability of the container Hook construction frame made of stainless steel Steel construction bead blasted and painted with epoxy primer Boundary lights Work platforms Work spotlights 2 pcs Additional headlights Frame of the rear lamp cover Galvanized mesh box Payload: without container - 3650 kg with empty container - 4450 kg Delivery time September/October 2026

Condition: new, mileage: 10 km, power: 128.71 kW (175.00 HP), fuel type: diesel, empty load weight: 3,490 kg, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, emission class: euro6e, suspension: steel, number of seats: 3, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, fog lights, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, truck registration, Model: Mitsubishi Fuso Canter Vehicle type: 7C18 Designation: 46925512 Vehicle category: Chassis Engine power: 129 kW (175 hp) Wheelbase: 3400 mm Permissible total weight: 7490 kg Paint finish: MB 0400 natural white OM5 engine version, Euro VI OBD Step E, Canter * Engine, start/stop system VA6 manual throttle control VB1 bracket and installation of manual throttle control Clutch & Transmission * Manual gearbox NQ7 gearbox PTO, 200 Nm, for hydraulic pump Axles & Suspension A86 limited-slip differential * Axle ratio i = 4.875 * Stabilizer bar, front axle Wheels & Tires RN2 steel rim 17.5 x 6.00 * Valve extension for dual tires * Wheel center caps (plastic) * Spare wheel holder, simply secured * Fuel tank, plastic * Tire pressure monitoring system * Active Brake Assist 6 * Spare wheel/spare wheel rim Frame & Frame Components * Chassis ladder frame, reinforced CR8 body mounting brackets on the vehicle frame K04 spacer, for fuel tank * Main tank 100 liters * Bumper, 3-piece (plastic/steel) CO8 rear underrun protection with trailer coupling Braking System * Electronic Stability Program (ESP) * Disc brake on front and rear axle with electronic wear indicator * ABS with electronic brake force distribution Exterior Cab * Comfort single cab * Cab, tiltable F62 rearview mirror, heated VB5 long mirror holder incl. wide-angle mirror * Central locking, with smart key * Immobilizer, with transponder Interior Cab * Armrest for driver's seat Fsdpezk Eg Usfx Af Sogd SH6 driver's comfort suspension seat, horizontal suspension * Co-driver's seat, 2-seater * Warning device for seat belts * Isringhausen seats, fabric black * Steering column holder adjustable in height and inclination * Multifunction steering wheel SA5 airbag, driver * Floor covering vinyl * Sun visor, driver and co-driver side (in cab) * Window lift for driver/co-driver door, electric LCD combination instrument unit * Tachograph, digital 4.1 (2 drivers) Speedometer (mph and km/h) * Vehicle Cyber Security JW0 reversing warning * Rear view camera * Interface for breathalyzer * Touchscreen DAB radio (6.95") Apple CarPlay, Android * Operating voltage base vehicle, 12V * Emergency brake light H03 air conditioning * Storage compartment above windshield, 1 compartment * Step assistance (handle) on driver and co-driver side EE9 reinforced vehicle battery, 2x100Ah (2 batteries) OT6 battery cover, double OV2 preparation for battery disconnect relay 12V * LED daytime running light * Fog lights LED LH9 LED front headlights Outline lights (according to ECE R7) * Side turn signals * Automatic light control with light sensor * High beam assistant (Intelligent Headlight Control) * Speed limitation 90 km/h, EC * Front protection assistant * Intelligent speed assistant * Attention assistant * Blind spot assistant * Emergency braking assistance system (AEBS) * Lane keeping assistant (LDWS) Hook Marcel AL4 Fassi Group EQUIPMENT Container protection: hydraulic internal Hydraulic distributor Hydraulic pump Oil tank Wide rollers ensure the stability of the container Hook construction frame made of stainless steel Steel construction shot-blasted and painted with epoxy primer Boundary lights Working platforms Work lights 2 pcs. Additional headlights Frame of the rear lamp cover Galvanized mesh box Payload: without container - 3650 kg with empty container - 4450 kg Delivery time September/October 2026

Year of construction: 2022, condition: like new (used), Agilent Model: G9800A For sale: an Agilent Cary Eclipse Fluorescence Spectrophotometer – unused, in original packaging (without software). As far as we know, the item has never been used and is in new condition. The original packaging is included and may show minor signs of storage. Year of manufacture: 11/2022 Agilent Technologies Cary Eclipse Fluorescence Spectrophotometer Description: The Cary Eclipse G9800A is a high-quality fluorescence spectrophotometer for research, laboratory and industrial applications. It offers exceptional sensitivity, speed and ease of use and is ideal for applications in the fields of biochemistry, pharmaceuticals, environmental analysis and materials research. Technical data: Light source: Xenon flash lamp Wavelength range: 200–900 nm Measurement modes: Emission and excitation spectra Time-resolved fluorescence Phosphorescence Excitation-emission matrix (3D scan) Software: Cary Eclipse Software (not included) Fedpfxjzia Iqs Af Sjgd Detector: High-sensitivity photomultiplier (PMT) Scan speed: Very fast (up to 80 nm/s) Typical applications: Analysis of proteins, DNA, enzymes Detection of environmental contaminants such as PAHs Fluorescent dyes & markers Development of pharmaceutical active ingredients Manufacturer: Agilent Technologies (formerly Varian) Model: G9800A – Cary Eclipse Fluorescence Spectrophotometer Included: Device, power connection cable, manual Power supply / connection data: Power connection: IEC C14 socket (standard cold device plug, as used for PCs) → Connection via standard cold device cable Mains voltage: 100–240 V AC, 50/60 Hz (automatically switching) Power consumption: Approx. 150–200 W (depending on operating mode) Fuse: Internally installed, typically T2A or T3.15A Weight: approx. 28–32 kg Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2017, condition: used, General information Mileage: 99.451 km Field of application: Grounds care Technical information Power: 110 kW (150 HP) Type of fuel: Diesel Weights Empty weight: 1.600 kg Carrying capacity: 2.145 kg GVW: 3.745 kg Environment Emission class: Euro 6 Condition General condition: good Technical condition: good Visual appearance: good Additional information Please contact Christian Theißen for more information Fedpfjzh Uyxsx Af Segd Manufacturer: Audi Model: Audi A4 Avant / emergency vehicle hatchback Year of build: 2017 Condition: Used Data: First registration: 07/2017 Fuel type: Diesel Mileage: 99.451 KM Gear type: Automatic Engine power/displacement: 110kW / 1968 cm³ Total permissible weight: 2.145 kg Empty weight: 1.600 kg Length: 4726 mm Width: 1842 mm Height: 1393 mm Environment badge: Green / Euro 6 Colour: white Equipment: Automatic front flashers, automatic air-conditioning, seats: 5, airbag, power window and power side-view mirrors, central locking system, ABS, ESC, radio, power steering Information: Equipment set-up: detachable emergency light and siren, hands-free system for mobile phones Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 1,140 kg, electrical fuse: 63 A, input voltage: 400 V, drive type: Elektromotor, Attachment wind sifter TUKWIND PRO 18. The combination blower with suction and compressed air in one station. Fgedpowhfgrsfx Af Ssd - Compact separation system for attachment to existing screening technology (mobile & stationary) - High suction and compressed air performance – infinitely adjustable by built-in frequency converter - Electric drive, therefore very low maintenance costs - 18.5kW power requirement; power plug: 63A CEE A wide range of applications is enabled by the robust design and individual adaptation to conveyor belts, etc. Ideal size for drum screening machines of the 5-6m class: (SM518, SM620, T5, T50, T6, T60, MAXX, Nemus, Cribus 2800, Cribus 3800, and more) Fields of application: construction waste recycling (Styrofoam, plastic films, wood chips, hard plastic pieces), composting (plastic films), RDF cleaning (plastics), brick chipping cleaning, and more.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,200 mm, total length: 1,200 mm, total height: 1,550 mm, overall weight: 270 kg, electrical fuse: 16 A, input voltage: 400 V, power: 7.5 kW (10.20 HP), drive type: Elektromotor, TUKWIND BASIC 7 add-on air classifier with special fan impeller and solid housing design. Our smallest suction fan is suitable for extraction at one suction point. Ideally suited for fine fraction cleaning, Styrofoam extraction, and small screening machines up to 4m drum length. - Optionally can be supplemented with our PUSH blowers to increase efficiency. - Easy expansion option as a spot extractor with 10m hand suction hose. Fgedpjwhfqwjfx Af Sod Facts: - Compact separation system for mounting on existing screening technology (mobile & stationary) - High suction power - continuously adjustable thanks to built-in frequency converter - Electric drive, hence very low maintenance costs - 7.5kW power requirement; Power plug: 32A CEE (16A fuse sufficient) A wide range of applications is made possible by the robust construction and individual adaptation to conveyor belts, etc. Fields of application: construction waste recycling (Styrofoam, plastic films), composting (plastic films), RDF cleaning (plastics), and more. The device can be purchased either separately or as a complete set. The set includes all necessary accessories such as: extraction hood, hoses, bends, quick clamps, net, etc.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,100 h, load capacity: 2,500 kg, lifting height: 3,400 mm, free lift: 1,210 mm, fuel type: diesel, mast type: triplex, construction height: 1,988 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 3,045 mm, drive type: Diesel, construction width: 1,450 mm, All-terrain forklift Load center: 500 Fodpfxszhp Ahe Af Segd ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: Very good Front tires Type: Pneumatic Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: With the MC25, available as a two-wheel or all-wheel drive, you can load loads safely and precisely on any terrain. The 30 cm ground clearance guarantees excellent climbing ability on your fields. Good all-round visibility and the compact and robust design ensure optimum safety at work. Discover the MC25, your new partner for more productivity! This Manitou rough-terrain forklift is also available in two-wheel or four-wheel drive technology in the MC 25-2 or MC25-4 or MC 30-2 or MC 30-4 version. Sideshift, 3rd valve, rear working lights, front working lights, semi-cab, full free lift,

Condition: used, functionality: unexamined, Jensen rotary distributor with 3 additional inputs Fjdpfxey Uh Ifj Af Segd For Bauch washing machine

Condition: used, Year of construction: 2024, lifting height: 2,760 mm, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 3.500 kg Functional Lifting capacity: 200 kg Working height: 1.050 cm Condition General condition: average Technical condition: average Visual appearance: average Fsdpewn Hr Njfx Af Ssgd Other information TÜV Marked: yes Delivery terms: EXW Transport dimensions (LxWxH): 6,16x2,02x2,76 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: France Elévateur Model: Topy 10.2 Year of build: 2024 Condition: Used Data: Gear type: manuell Max. working height: 10,50 m Max. platform height: 8,50 m Max. reach (200 kg): 4,80 m Total dimensions LxWxH: 6,16 x 2,02 x 2,76 m Platform dimensions (outside) LxWxH: 1,00 x 0,75 x 1,11 m Max. basket load: 200 kg Max. Number of people: 2 Swivel range of the upper carriage: 2x 200° Engine: Mercedes Benz Displacement: 1.950 cm³ Performance: 110 kw Colour: weiß Driving license class: B / 3 Own weight: 3.500 kg Special features: insulated work basket, socket in the basket, AdBlue.

Condition: used, functionality: fully functional, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity available: 8 Manufacturer: Sick AG Model: M40S-64A503AA0 Type: Safety light curtain, Type 4 Fgsdpfjzh Ak Eox Af Ssd Protection field height: 640 mm Range: up to 30 m Resolution: 30 mm Safety category: Type 4, SIL3, PL e Voltage: 24 V DC Outputs: 2 OSSD Function: Protection of hazardous areas on machines

Condition: ready for operation (used), functionality: fully functional, conveyor belt width: 600 mm, working width: 600 mm, Complete puff pastry line RIJKAART / RINC 600mm | Operational, Tested For sale: a complete, industrial laminating line for the automated production of puff pastry, semi-puff pastry, and Danish pastry, manufactured by the renowned Dutch brands Machinefabriek C. Rijkaart bv / Rinc Europe. REASON FOR SALE: The line was purchased from a distributor and fully prepared for operation under a specific production contract. Due to reasons beyond our control, the contract was not finalized. The machine has not been used in continuous operation and is 100% free of any legal defects. TECHNICAL CONDITION AND SERVICE: The machine underwent a full technical inspection after purchase. All components requiring attention have been replaced with new ones – including new main bearings and some conveyor belts. The line has been successfully connected and mechanically tested. I have a current video recording of the start-up tests (available immediately via WhatsApp). TECHNICAL SPECIFICATIONS: Working width of the belt: 600 mm (Euro standard – ideal for baking trays) Estimated capacity: approx. 400 kg – 1000 kg of dough per hour (depending on the thickness of the sheet and the product) Construction: Stainless steel / acid-resistant steel with the legendary, robust Rijkaart mechanics (very easy to maintain, without problematic PLC electronics). THE SET INCLUDES: Automatic dispenser / pump for margarine and fat Triple station of independent calibrating rollers (multiroller) for precise dough stretching Original, central Rinc electrical and control cabinet with a clear synoptic panel Two-level conveyor / roller feeder Complete set of 600 mm conveyor belts LOGISTICS AND PICK-UP: The main feeding section is located in the production hall, and the remaining components are safely stored under a sealed industrial tent. Dismantling and transport are the responsibility of the buyer. We provide free assistance and loading with a forklift on-site. Fgjdpfxjzivw Ue Af Ssd TERMS OF SALE: Sale only to companies – we issue a full VAT invoice. Starting price: PLN 299,000 net (negotiable within reason).

Condition: like new (used), functionality: fully functional, Year of construction: 2024, overall weight: 160 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,930 mm, input voltage: 230 V, input frequency: 50 Hz, laser wavelength: 10,600 nm, type of input current: AC, laser type: CO₂ laser, Equipment: lighting, With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. The LAS 28 laser model can optionally be equipped with a rotary axis (3-jaw chuck) for labelling cylindrical parts. Other options, such as lateral cantilevers for labelling long parts, can also be realised. 30W CO2 laser (optional: 60 W) - Wavelength 10640nm - marking field size 220x220 mm - optional: rotary axis (3-jaw chuck) - optional: exhaust system (incl. activated carbon filter) Fsdpswkpyhofx Af Sogd - optional: extension arm for large workpieces (also on both sides) - marking software EZCAD in German / English - Pilot laser (simple preview) - focus finder (easy focus adjustment) - max. part height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with operating system Windows - frame made of aluminum profile - air cooled - door width approx. 720mm / door height: 400mm - Connection 230V - Dimensions: approx. 1000 x 800 x 2000 mm (LxWxH) - Weight: approx. 140 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, travel distance Z-axis: 300 mm, space requirement width: 1,550 mm, space requirement height: 2,050 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg Fjdpsxd Az Njfx Af Sogd

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, total length: 900 mm, total width: 800 mm, total height: 1,900 mm, laser hours: 2 h, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, laser source manufacturer: Raycus, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fgjdpfxjqfcvie Af Ssd Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg