Used Napkin Folder for sale (705)

Condition: good (used), Strati Anden 660A Folder Gluer The machine is in very good condition, recently inspected, regularly serviced, and maintained. This single-point machine includes a right and left gluer. Year of manufacture: 2015 Width: 660mm Maximum speed: 180m/min Maximum paper weight: 600gsm Power: 4.5kW Guedpjzz Hgwsfx Akaog Power supply: 230V External dimensions: 750x105cm Weight: 1800kg Includes a set of documents and a pallet of small parts.

Condition: ready for operation (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, Equipment: compressor, documentation/manual, The Morgana Major folder is a compact, high-performance folder with two fold plates. It is designed for short-run digital and commercial print shops. Built for reliable, easy-to-use folding of brochures, leaflets and booklets, it offers quick job changes and consistent fold quality for mixed media. Its simple setup and robust air feeding system make it a best choice for finishing departments seeking speed and repeatable results. Maximum sheet size: 648mm x 365mm Minimum sheet size 148mm x 140mm Gedez Agvbjpfx Akajug Maximum paper weight 240 gsm Minimum paper weight 56 gsm Load capacity 500 sheets 80 gsm Speed up to 27.000 A4 sheets per hour

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Gedpfxozy Ndcj Akasug Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Corrugate A/B/E Crash lock Gedpfjtq E U Sox Akasug 300 meter per minute Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: SM240101, type of input current: three-phase, total width: 3,500 mm, total length: 14,000 mm, input voltage: 380 V, power of the servo motor: 15,500 W, overall weight: 7,000 kg, cutting length (max.): 1,650 mm, For sale: practically new, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME. 2024 model in excellent condition, ideal for high-demand packaging. Type: Automatic Folder Gluer, Bottom Locking Type Gedpfx Aszil Nyekasug Year: 2024 Effective Width: 1650 mm Power: 15.5 kW Condition: Excellent, like new. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), paper slitting and rewinding machine YYS-I, year 2023, fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019 and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME,manufactured in 2021 are also available for sale.

Condition: excellent (used), Year of construction: 2011, operating hours: 1,200 h, functionality: fully functional, overall weight: 1,800 kg, machine base height: 1,400 mm, Equipment: documentation/manual, Very good condition and low hours. KAMA Profold is a flexible folder gluer for folding cartons with straight-line or crash-lock bottom. ProFold 74 folds and glues blanks into a multi­tude of print products auto­mat­ic­ally and cost-effi­ciently! Whether present­a­tion folders, folded cards, ship­ping envel­opes, ticket pockets, cross folders and advent calen­dars or orders from the field of pack­aging, such as folding cartons with straight-line or crash-lock bottom. Produce all these products in-house on the ProFold 74, benefit from shorter delivery times and extend your margins! OPTIONS INCLUDED: -Device for crash lock bottom(automatic) boxes, K70513 -Addition Crash lock kit: 2 devices, 3 x rolls, 2 x 6 rolls, 6 clamps K70514 Gsdpfxozzdcvj Akasug -Baumer HHS: 1 nozzle incl. hose, plus mounting bars K70601 - Spending/placing device - 4pcs. 1 unit down hold devices -1pc. Small folding knife left -1pc. Cross beam Addition Crash lock kit: 2 devices Technical specs: Max sheet size 740x740mm Min: 100x120mm Max speed: 150m/min Paper and cardboard 100-600g/m2

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1907, type of input current: three-phase, total width: 2,050 mm, total length: 22,100 mm, total height: 1,350 mm, input voltage: 380 V, power of the servo motor: 10,000 W, overall weight: 6,500 kg, cutting length (max.): 2,300 mm, For sale: high-performance, fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME. Built in 2019, this machine is designed for fast, automated production of large-format packaging. Due to its automated feeding and folding system, it is ideal for demanding industrial operations. Key Technical Specifications: Manufacturer: HEBEI Soome Packaging machinery co., ltd. Guodpfxozimggj Akaeg Machine Type: Folder Gluer (Automatic Type) 1400x2800 SMZX-QZD-2800 Model: 1400 x 2800 Year of Manufacture: 2019 Effective Width: 2,800 mm Voltage: 380 V Condition: Operational, robust industrial design, ready for sale. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), paper slitting and rewinding machine YYS-I, year 2023, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME. 2024 and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are available for sale.

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Manufacturer: FASTI, Type: 205, 1020 x 2 mm Year of manufacture: 1983 Technical data Manufacturer: Fasti Type: 205 Year of manufacture: 1983 Usable length: 1020 mm Gsdpfxoz Ah Aps Akaeug Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: approx. 750 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. A demonstration can be arranged at our showroom at any time.

Condition: excellent (used), Year of construction: 2018, Ref:11138 . 2018 Horizon CRF-362 Creaser-Folder High speed automatic creasing / folding machine designed for both digital and offset printers to crease & fold digitally printed, heavyweight or cross-grained stock in one pass. Avoiding cracking of digitally-printed stocks. Quick and easy set-up and operation is performed through the high resolution colour touch screen. Suitable for creasing covers, restaurant menus, shop cards, invitation cards and laminated sheets. Preparing Perfect Bound Book Covers – sharp, high quality creasing prepares the spine, hinge and flap by selecting up or down creasing. High Quality Folding – two fold knives for high quality folding, even on heavy stocks. 6 different folding patterns can be set up simply by using the icon based touch screen. Gedpfx Aozu Divokasug Specification: Maximum sheet size 364 × 865 mm Minimum sheet size 105 × 180 mm Feeding system Air suction feed belt Feeder pile height 150 mm Normal paper – crease & fold 80–350 gsm Normal paper – crease only 80–400 gsm Coated paper – crease & fold 105–350 gsm Coated paper – crease only 105–400 gsm Laminated stock – crease & fold 0.2–0.4 mm Laminated stock – crease only 0.2–0.5 mm Maximum crease lines 10 per sheet Creasing direction Positive / negative (up or down) Folding system 2 knife-fold units Speed: Up to 4,500 sheets/hour

Condition: good (used), Swivel bending machine, a press brake from the renowned manufacturer Schröder. Capacity: 3mm steel, aluminum, etc., and more. Working width: approximately 2.04m. Weight: approximately 2.4 tons. Easy to operate. Manual and foot controls. Optionally, a segmented upper beam or a back gauge is available. The machine comes from private use. Loading with a forklift is no problem. On-site testing is, of course, possible. Gujdpfx Akjz Ad Rvjajg You will receive an invoice according to §25a UStG – the VAT is included in the invoice amount. Subject to differential taxation. Optionally, a matching plate shear, 2m, 3mm, is available – a set price is also possible. Other equipment and tools for sheet metal processing are available.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 034108905, BOBST 100 II - A2 folding and gluing machine, manufactured in 1999. This efficient machine is designed for the production of straight-line packaging and packaging with a crash-lock bottom, handling cardboard and corrugated board. It features 6 cold glue applicators and one hot glue applicator. It also has a wheel-fed glue system with a container. It glues at 6 points – with various glue application methods. It includes a cassette for gluing envelopes. The HHS system in this version is very good – it can be used to produce envelopes, Advent calendars, and boxes. The machine can be inspected at our printing facility in Szczecin. Gusdjzwmvqspfx Akaeg

Condition: like new (used), Year of construction: 2021, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Guodpfx Akjzzxb Hjajg Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: excellent (used), Year of construction: 2020, Ref: 11145 . 2020 Horizon AFC-566 FKT Automated B2 size folding machine with up to 14 different folding patterns. Equipped with: Flat pile feeder Pro-Face touch screen control Computer assisted make-ready, including roller gap adjustment Sound Hood Godsz Akl Hjpfx Akaoug Digital Counter LCV-54 shingle delivery. Folding configuration: 6 Buckle plates in first station Electronic knife fold 2 x side buckle plates under knife Specification: Sheet size, Max: 558 x 850 mm Min: 128 x 148 mm Pile height, Max: 740 mm Prod. speed, Max: 42,000 sheets/hr. (A4 parallel fold).

Year of construction: 1989, condition: used, Folder Gluer Gujdpfx Aksz Atf Noaeg bottom lock 4 gluing points

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: SM2021609, type of input current: three-phase, total width: 1,900 mm, total length: 3,800 mm, input voltage: 380 V, power of the servo motor: 4,000 W, overall weight: 2,150 kg, For sale: an exceptionally well-preserved and minimally used semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME. The machine was manufactured in 2021, installed in late 2022, and officially activated for production in 2023. Available now due to plant closure. This heavy-duty machine (over 2 tons) is highly reliable and capable of high-speed gluing for large formats of corrugated board (up to an impressive 2800 mm width). Key Technical Specifications: Manufacturer: HEBEI Soome Packaging machinery co., ltd. Machine Type: SOOME SMZX-2800 Year of Manufacture: 2021 (Activated: 2023) Max Cardboard Width: 2,800 mm x 1,500 mm Operating Speed: 0 - 75 m/min Gsdpfezil Tlsx Akajug Power Supply: 3×380 V/AC, Installed power 4.0 kW Machine Dimensions: 3,800 x 1,900 x 1,700 mm Machine Weight: 2,150 kg The machine is located in Slovenia (Celje region). The electrical installation was renewed in 2023; the unit is connected to power and ready for inspection. The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), paper slitting and rewinding machine YYS-I, year 2023, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME (2024) and fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME (2019) are also available for sale.

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Features of the device: Press brake Schechtl MA 200 / 6 The bending beam bends cleanly – testing is possible. Angle adjustment for up to 6 bending steps (if only 2-3 or, for example, 4 are needed, simply set it to the desired number). Ideal for series bending. The machine was used by a carpenter. Bending length slightly over 2m. Sheet thickness: 2 mm iron – sheet – aluminum, zinc, etc., up to approx. 3 mm. Standard bending beam – radius for aluminum, zinc would also be available as an option, as would an extension and special bending beam! Foot pedal for operation. Optional depth stop. Gusdpfxezzff Sj Akajg Sheet metal shear HT 200, or MT (see picture) – or sheet metal shear Schröder electric 2m – 2.5mm would be optional, but not included in the price – the offer can be adjusted. Important! You can optionally find and purchase many machines and machine accessories, such as various bending beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, circular machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice according to § 25 a UStG; the VAT is included in the invoice amount. Differential taxation. Free loading is possible – weight approx. 1700 kg. Inspection and testing are possible and desirable after arranging an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Press brake MA 200 / 6

Condition: used, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Jorns, controller model: OP, working width: 6,000 mm, bending angle (max.): 145 °, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, total length: 6,800 mm, total width: 1,650 mm, Equipment: emergency stop, foot remote control, We are offering this used Jorns NL125-SM-OP-6 swiveling bending machine, manufactured in 1992. Gsdpfx Akjzmy Eqeaoug Manufacturer: Jorns Model: NL125-SM-OP-6 Year of manufacture: 1992 Condition: used Machine type: Swiveling bending machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2004, machine/vehicle number: 20041227, type of input current: three-phase, total width: 2,500 mm, total length: 12 mm, total height: 1,700 mm, input voltage: 380 V, compressed air connection: 6 bar, overall weight: 5,000 kg, We are offering this used Stock Maschinenbau SFAM 2020 edge banding machine, manufactured in 2004. Guedpfxozr N Huj Akaog The associated press belt was manufactured in 2010, and the Meler hot melt glue applicator was manufactured in 2022. The working width for hot and cold glue is approximately 2100 mm! Type: SFAM 2020 Machine No.: 20041227 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, ERBEND D-SFA 4230 – CNC Folding Machine The ERBEND D-SFA 4230 is a powerful double-sided CNC folding machine for accurate and flexible sheet metal processing. This machine is offered on behalf of a customer and has less than 10 operating hours. It is in nearly new condition, fully functional and immediately available. The machine can be viewed under power and tested by appointment. Main Features 4,200 mm bending length Gedpfx Akezwqwxjajug Double-sided folding: upwards and downwards ERFOLD 3D CNC control 2D/3D programming and simulation Motorized CNC axes U-shaped back gauge Pneumatic back gauge fingers Integrated vacuum cups for sheet positioning Segmented upper and lower tooling Pneumatic tool clamping CE certified Technical Specifications Model: ERBEND D-SFA 4230 Bending length: 4,200 mm Steel S235: max. 2.25 mm Stainless steel: max. 2.0 mm Aluminium: max. 3.0 mm Control: ERFOLD 3D CNC CNC axes: A, B and D axis Upper tool: 200 mm Crowning: Manual Machine weight: approx. 11,800 kg Double-Sided Folding The D-SFA technology allows the machine to fold both upwards and downwards, significantly reducing the need to turn or reposition the workpiece. Combined with the CNC-controlled back gauge, vacuum sheet positioning and ERFOLD 3D programming, this makes the machine particularly suitable for efficient production of large and complex sheet metal parts. Condition & Availability Less than 10 operating hours Nearly new condition Fully functional Immediately available Inspection and testing under power possible An excellent opportunity to acquire a nearly new ERBEND D-SFA 4230 without the delivery time of a new machine. Contact us for further information, pricing or to arrange a demonstration.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 210927, total width: 2,000 mm, total length: 15,000 mm, total height: 1,400 mm, The machine is being sold because our company's processing division has been discontinued. This Jagenberg Diana gluing machine is the ultimate all-rounder for folding carton gluing. Most of our folding cartons had an open size between 14 and 30 cm, but with a maximum width of 125 cm, large formats are no problem either. The machine can handle straight-line, crash-lock bottom, as well as 4- and 6-corner gluing. It was operated in single-shift mode without any technical issues. We retrofitted the quality inspection system from hhs, which includes product type detection with an ejection station and glue application monitoring. All belts were regularly replaced. The electric motor has been completely overhauled with new windings. The machine's main drive is via a robust coupling system rather than belts, as is common with later models. The machine is user-friendly, with all units easily accessible. Its overall condition is excellent, with only age-related signs of use. If interested, we can provide a video via email. Gedpfjx R Sn Isx Akasug

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 030400811, type of input current: DC, Original Bobst HANDYPACK collecting table, in good used and refurbished condition. Output on the right side, can also be modified for the left side. Immediate availability. Gusdpfx Akozk Up Ejasg

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 12-032-SP, total width: 1,900 mm, total length: 17,370 mm, total height: 850 mm, Linear folding and gluing machine equipped with 4 electronically adjustable glue guns for gluing 4/6-corner boxes (ERO). Gujdpfxjzin Hhs Akajg

Condition: used, We offer for sale a Horizon AFC-744S Cross Folder in used working condition. The machine is currently installed in a printing facility and is available for inspection. It is suitable for professional post-press production and high-quality folding work. Machine details: Manufacturer: Horizon International, Inc. Model: AFC-744S Cross Folder Serial No.: 354002 Configuration: 4 folding cassettes + knife + cassette + knife Maximum sheet size: 738 × 1100 mm Minimum sheet size: 210 × 297 mm Power supply: 400V, 3-phase, 50/60Hz Made in Japan Condition: The machine is in used working condition. It has been installed in a production environment and shows normal signs of use. Available for inspection before purchase. Gjdpezfivvofx Akasug Included: Horizon AFC-744S folding machine 4 folding cassettes Cross-folding knife unit Additional cassette and knife section Feeder and delivery system as shown in the photos Control panel / operating screen Additional information: The machine is sold as shown in the photos. Dismantling, loading, transport and installation are not included in the price unless agreed separately. For more information, additional photos, video of the machine in operation, or to arrange an inspection, please contact us.

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, BOBST DOMINO 100M folder-gluer manufactured in 1977, designed for the production of folding cartons and micro-flute packaging. The machine is currently in production, regularly maintained, and in very good technical condition. It is suitable for straight-line cartons and crash-lock bottom boxes. Technical specifications: • Manufacturer: BOBST • Model: DOMINO 100 M • Year of manufacture: 1977 • Working width: 1000 mm • Maximum production speed: up to 400 m/min • Solid board processing capability: up to 700 g/m² • Materials: folding carton and micro-flute board • Box styles: Straight Line and Crash Lock Bottom • Power supply: 3~380V / 50 Hz • Maximum connected load: 25 kVA • Total installed power: 11 kW • Machine dimensions: 14 × 1.9 × 1.7 m • Machine weight: 8.5 tons Equipment: • 2 independent operator panels with displays • Additional monitor at the delivery section with a camera view of the machine exit. • Additional production tooling included • Complete technical documentation • Electrical documentation • Operator documentation Optional gluing systems: The machine is offered without a gluing system. The buyer may choose one of three professional gluing systems: • KAS – EUR 9,800 net • Robatech – EUR 11,900 net • HHS – EUR 15,900 net All systems are operational, currently used in production, and can be demonstrated and tested during machine inspection. Technical condition and tests: The machine is in continuous production and can be inspected while powered on. It operates stably and provides high-quality folding and gluing. In the presented video material, the machine is shown folding and gluing cone-shaped packages. For straight-line carton production, the machine regularly achieves an output of approximately 20,000–25,000 boxes per hour. Gedpfszr Rm Njx Akaoug Actual production output depends on the box design, blank dimensions, material type, and selected operating speed. • Production trials with customer-supplied blanks are available • Tests with the selected gluing system are available • Individual live machine demonstration can be arranged • Technical documentation can be reviewed during inspection

Condition: good (used), Thalmann Pico 1mm steel - 1.75mm aluminum Gusdpezyzz Tjfx Akaeg The machine was recently inspected and adjusted by a professional. It is in perfect working order and ready for immediate use. It bends all angles precisely up to a length of 6 meters. The shears are sharp and cut electrically. The control is simple and includes a foot pedal. Testing under power is possible – a forklift is available on site. The machine is privately owned and is being offered here as a friendly service (facilitated sale). Private sale – near Heilbronn.