Used Fine Granulator for sale (2,659)

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm Gbedpfxjfgyice Ap Dou total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable Godpfxjfg E Hps Ap Dobu • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! Gedpfx Apoupw R Aj Dsbu • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: used, HERBOLD PU800 pulverizers Godpfx Apoz Hxifo Djbu Suitable for soft to medium-hard materials Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Drive motor: 90 kw

Condition: excellent (used), Year of construction: 2010, Diebold Tool Presetter VEG 400 For measuring the lengths and radii of milling, turning, and boring tools - Easy to use - Robust design for use directly at the machine - Universally adjustable - Rotatable spindle made of stainless steel - Reference values for diameter and length on the spindle - Outstanding concentricity accuracy - Measurement accuracy less than 0.02 mm - Digital display with a resolution of 0.01 mm - Data output ports - Includes a shipping box for self-adhesive labels for tool marking - Lockable fine adjustment for precise positioning of measurement values - Adaptable to all taper sizes and cylindrical holders Gbjdpfx Ajx Nq Htep Deu Technical data: - Dimensions (L x W x H): 350 x 175 x 730 mm - Measuring range: Length: 410 mm, Diameter: 240 mm - Weight: 22 kg - Color: Red RAL 3003 - Spindle run-out: less than 0.005 mm - Measuring accuracy: less than 0.02 mm Top condition - from a school setting Location: available from stock 54634 Bitburg - Immediately available -

Condition: used, HAAS Wood Chip Screening Machine Manufacturer: HAAS Recycling Systems Country of origin: Germany Type: Vibrating chip screen Designed for screening wood chips, bark and biomass materials Suitable for separating fine particles and contaminants Vibrating screening system Multiple material discharge fractions Approximate dimensions: Length: 4.29 m Width: 2.10 m Gbedpszmfq Sefx Ap Deu Suitable for woodworking and biomass processing industries

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter Godexcy D Espfx Ap Dobu

Condition: used, This listing is for a Medite A550 Rotary Microtome Developed and manufactured by experts in Germany The fully automatic Microtome A550 is the premium model for use in histology and histopathology as well as in research laboratories and in industrial quality assurance. With this microtome version, both the horizontal feed and retraction and the vertical cutting stroke are motorized. This means physical relief for the user during intensive, long-term use. Alternatively, the cutting stroke can also be carried out manually using the smooth-running handwheel, if, for example, sensitive cuts are necessary for very fragile tissue samples. The handwheel can easily be locked in any position using a spring lever. The proven, high-precision microtome mechanism is developed and produced in Germany and ensures maximum sectioning quality for continuously high sample throughput. The Microtome A550 impresses with its high functionality and attractive design that are focused on optimal ease of use. Settings relevant to the sections are entered via the intuitively operated membrane keyboard with digital display. The background color is freely selectable. Gbodpfexzgv Ejx Ap Dju The upper rotary push button on the left is used to switch between fine and coarse adjustment and to scroll through the menu. With the middle, larger rotary push button, the specimen clamp is simply moved back and forth. This can also be done using the keyboard. The sectioning speed can be set with the lower rotary push button and two different speeds can be selected for trimming and fine sectioning.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4852.45 € 250 x 40 x 51 mm 1300 x 75 mm 1,4 kW 1400 1/min 15 m/s 42 mm 600 mm 540 mm 1190 mm 1200 x 800 x 1000 mm 70 kg With base frame, integrated suction and brake High performance Belt grinding device height adjustable 0-90°. Gbodsyrhnxspfx Ap Dou Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug ALTERNATIVES: Version without suction (Art. 330.365) Version without stand, suction and brake (Art. 330.360)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4533.22 € 300 x 40 x 51 mm 2,2 kW 1250 1/min 42 mm 540 mm 530 mm 1180 mm 800 x 600 x 1400 mm 90 kg With machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779) Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Gedpsyrhpcjfx Ap Dobu Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVE: Version without suction (Art. 317.776) Version without stand, suction and brake/emergancy push button (Art. 317.764)

Condition: new, neu 080244 November 2026, Zwischenve Slowakei 26400 € Gsdpfx Ajwiqnqsp Dsbu 504.24 € 40 to 1500 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW 2000 mm 950 mm 1900 mm 1800 kg 420 mm 1 10 mm/s 12 mm/s 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German

Condition: new, neu Gsdpfx Apswiq U Rs Dsbu ca. 6 Monate ab Auftragse Taiwan 111670 € 2110.56 € 400 mm 500 mm 400 mm 225 mm 400 mm 50 kg 450 mm 500 - 2200 1/min 5,5 kW 19 kW 2800 mm 2800 mm 2610 mm 2850 x 2000 x 2470 mm 3450 kg Dm. 355 x 38 x Dm. 127 mm 0,001 mm 1.7 kW 2.4 kW 10 - 150 1/min 0.005 mm 0.003 mm iSurface control with 10,4" touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-400S with Smart iControl for profile grinding price on request (symbol photos - showing model FRG-600)

Condition: new, functionality: fully functional, power: 5.5 kW (7.48 HP), operation weight: 4,800 kg, Year of construction: 2026, Equipment: CE marking, Double deck screener on a skid frame for easy transport. Possibility of adding petrol generator, hopper extension, Feeder plate with stop rubber, Extended hinged wing-plates, Extended screenbox chute, Rear cover for screenbox and removable skid frame hook. Low operating costs, simple change of meshes, robust dimensions, 2 conveyors for medium and fine fractions. 4800kg Gbjdpfjxpglisx Ap Dsu

Condition: new, pressure 8,0 kN stroke 40 mm throat 90 mm Working height from to 50 - 200 mm table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand Gedpfxofv Avko Ap Dobu • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Gjdpefg E Ibsfx Ap Dsbu Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen Gedpfx Apefg U Tps Djbu column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen Gsdjfg U Ttspfx Ap Dsbu column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,620 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,120 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, side walls 600 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear walls, side walls with pivoting and folding function, side walls with spring relief, bed made of fine-grained steel, 4 mm thick, 12 strong lashing eyes recessed in the floor, tilting angle: 50 degrees to the rear and 45 degrees to the side, continuously adjustable drawbar height, rear stakes can be inserted, geared support winch with load and fast gear, at the front, receiving shaft for two aluminum ramps integrated into the chassis, contour marking according to ECE R 048 regulation, surcharge for aluminum ramps, load capacity per pair 10 tons and 2 x folding supports, at the rear, ramps suitable for vehicles with steel tracks and rubber tires, price: 1,900 euros, typographical errors, errors and changes reserved, sample images, more data at: !, More details: ! Gedpfx Aez Illvsp Dsbu

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gjdpfxez Ilphs Ap Djbu

Condition: new, Equipment: CE marking, 2-deck screener, possibility of delivery with hopper extension and petrol generator. Simple handling and transport, low operating costs, simple change of the meshes, meshes made of high-quality spring steel. The screener is on a skid frame for quick and easy transport, the built in conveyor for the fine fraction. Gbsdpsz H Ng Iefx Ap Dju

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, empty load weight: 285 kg, maximum load weight: 1,715 kg, overall weight: 2,000 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,500 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 256 150 2000 2 ⭐New Model⭐ NEW VEHICLE Internal dimensions: 256cm x 150cm Side board height: 30cm Loading platform height: 66cm Total weight: 2000kg Payload: 1715kg Braked single-axle flatbed trailer Overrun brake and handbrake by KNOTT Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tension lock Foldable and removable on all sides 15mm thick, non-slip and robust screen-printed plywood floor Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pole connector LED outline lights at the front Rear lights with reversing light and triangular reflectors OPTIONAL ACCESSORIES -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side boards (price reduction) -Black Edition (Powder-coated side boards and rims in black) -Ramps -Steel plate on base plate -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension side boards 30cm with tension lock -Flat cover with or without bow -High cover Further accessories available on request! Plus freight to Gera and vehicle registration document €200 net Gjdjz Iamuspfx Ap Dsbu Images are examples and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 410 kg, maximum load weight: 1,590 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,560 mm, loading space width: 150 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 256 150 2000 Rear Tipper ⭐ NEW MODEL ⭐ NEW VEHICLE Internal dimensions: 256cm x 150cm Side board height: 30cm Loading platform height: 67cm Total weight: 2000kg Payload: 1590kg Braked two-axle trailer Overrun brake and handbrake by Knott Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tension lock Can be folded down and removed on all sides Gsdpoz Iaanefx Ap Debu 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber supports Hand pump with adjustable handle OPTIONAL ACCESSORIES -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Electric tilting mechanism -Charger -Remote control -Bluetooth remote control -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf screen in various heights, also closed -Extension sideboards 30cm with tension lock -Flat cover with or without bow -High cover More accessories available on request! Plus vehicle registration document and shipping costs from the manufacturer to us: €200.00 net Images are examples and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 410 kg, maximum load weight: 1,590 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,560 mm, loading space width: 150 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 256 150 2000 Rear Tipper ⭐ NEW MODEL ⭐ NEW VEHICLE Internal dimensions: 256cm x 150cm Side board height: 30cm Loading platform height: 67cm Total weight: 2000kg Payload: 1590kg Braked two-axle trailer Overrun brake and handbrake by Knott Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber supports Hand pump with adjustable handle OPTIONAL ACCESSORIES -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Electric tilting mechanism -Charger -Remote control -Bluetooth remote control -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Theft protection Gedpoz H Uw Ejfx Ap Debu -Net with fine or coarse mesh -H-frame -Leaf screen in various heights, also closed -Extension sideboards 30cm with tension lock -Flat cover with or without bow -High cover More accessories available on request! Plus vehicle registration document and shipping costs from the manufacturer to us: €200.00 net Images are examples and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Year of construction: 2026, condition: new, Josan & Sons ‼️Net price: €42,000‼️ We also offer leasing and financing options. Feel free to ask us. Gjdpfxop E Egps Ap Djbu We have shredders and other recycling machines in stock in Heilbronn for all types of recycling! From copper recycling to plastic recycling, you can purchase all the machines you need from us. Feel free to ask us. You can also watch videos on our website. Two-shaft shredder 80 cm shaft width 2 motors, 18.5 kW each Very powerful shredder for tires, steel, wood, cables, plastics, etc. – a universal shredder. Robust, durable – quality guaranteed by Josan. Net price: €42,000.00 +19% VAT: €7,980.00 Gross price: €49,980.00 Subject to errors. Images/price may vary.

Year of construction: 2026, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. Gbedpfx Ajqvmpfop Dou ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.