Used Fischer 18Cfg for sale (222)

Condition: used, functionality: fully functional, machine/vehicle number: H21202Y062.., Year of construction: 2021, operating hours: 1,750 h, load capacity: 2,500 kg, lifting height: 5,060 mm, free lift: 1,595 mm, fuel type: diesel, mast type: triplex, construction height: 2,285 mm, fork length: 1,200 mm, drive type: Diesel, Diesel Forklift VIN: H21202Y062.. Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Very good Front Tires Type: Super Elastic Front Tires Condition: 80 - 100% Rear Tires Type: Super Elastic Rear Tires Condition: 80 - 100% Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Heating, Full Cab, Dual Pedals, USB Port. Iijdjwiavkspfx Acrsc

Condition: used, functionality: fully functional, machine/vehicle number: H2X393G015.., Year of construction: 2016, operating hours: 5,150 h, load capacity: 3,500 kg, lifting height: 4,650 mm, free lift: 1,450 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, empty load weight: 5,340 kg, drive type: Treibgas, LPG Forklift Chassis number: H2X393G015.. Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Solid rubber Front tire condition: New Rear tire type: Solid rubber Rear tire condition: New Sideshift, fork positioner, 3rd valve, 4th valve, Iisdoy Hmywopfx Acrjc

Condition: used, functionality: fully functional, machine/vehicle number: H2X391D013.., Year of construction: 2013, operating hours: 7,500 h, load capacity: 2,000 kg, lifting height: 3,850 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: H2X391D013.. Load center: 500 mm Fork width: 980 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Ijdpfxsy Hmyqs Acreic Transmission: Hydrostatic Condition: Ready to use and fully operational Technical condition: good Front tires type: Solid rubber Front tires condition: 60 - 80% Rear tires type: Solid rubber Rear tires condition: 40 - 60% Side shifter, 3rd valve, rear work light, front work light, semi-cabin,

Condition: used, functionality: fully functional, machine/vehicle number: W41173H037.., Year of construction: 2017, operating hours: 3,500 h, load capacity: 1,400 kg, lifting height: 2,930 mm, free lift: 1,520 mm, fuel type: electric, mast type: duplex, construction height: 1,910 mm, drive type: Elektro, Pedestrian pallet stacker Chassis number: W41173H037.. Load centre: 600 mm Mast type: Duplex Technical condition: good Front tyre type: Vulkollan Front tyre condition: 60 - 80% Rear tyre type: Vulkollan Iiedpfx Asyhiivscrjc Rear tyre condition: 60 - 80% Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: GBD Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Battery with charger

Condition: used, functionality: fully functional, machine/vehicle number: H2X393V01345, Year of construction: 2019, operating hours: 4,760 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: gas, mast type: triplex, construction height: 2,460 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift truck Iedpfx Aey Hmykocroic Chassis number: H2X393V01345 Load centre: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Solid rubber Front tyre condition: 80 - 100% Rear tyre type: Solid rubber Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, road approval (STVZO), full cabin,

Condition: used, Year of construction: 2010, operating hours: 942 h, functionality: fully functional, machine/vehicle number: 103BS00103/00, fuel type: gas, empty load weight: 1,290 kg, drive type: Treibgas, sweeping width: 1,000 mm, Sweeper-suction machine Chassis number: 103BS00103/00 Ijdoy Hmx Hepfx Acreic Condition: Ready for operation and fully functional Technical condition: normal

Condition: used, functionality: fully functional, machine/vehicle number: K005A03827Y, Year of construction: 2014, operating hours: 7,825 h, load capacity: 5,500 kg, lifting height: 4,100 mm, fuel type: gas, mast type: duplex, fork length: 2,400 mm, drive type: Treibgas, LPG forklift truck Chassis number: K005A03827Y Load centre: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Iedpfsy Hmxmox Acroic Mast type: Duplex Condition: Limited operational readiness Technical condition: normal Front tyres type: solid rubber Front tyres condition: 60 - 80% Rear tyres type: solid rubber Rear tyres condition: 40 - 60% Description: V6 GM engine, 3rd valve, rear work lights, front work lights, heater, full cab,

Condition: used, functionality: fully functional, machine/vehicle number: FN627795, Year of construction: 2020, operating hours: 4,421 h, load capacity: 1,800 kg, lifting height: 4,640 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork length: 1,150 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN627795 Load centre: 500 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Ijdpey Hmxgofx Acrsic Front tyres type: solid rubber Front tyres condition: 60 - 80% Rear tyres type: solid rubber Rear tyres condition: 40 - 60% Battery voltage: 48V Battery capacity (Ah): 625Ah Battery manufacturer: GBD Battery type: PzS Battery condition: 60 - 80% Sideshift, 3rd valve, rear working light, roof cover, windscreen, Multipilot control,

Condition: good (used), overall weight: 160 kg, The BookMaster brochure-making machine and the TrimMaster front cutter combine maximum performance with cost-effectiveness. They are easy to operate and require minimal maintenance, making them the most advanced, user-friendly, and reliable saddle-stitch brochure-making machines on the market. The BookMaster features a unique stitching mechanism that ensures virtually maintenance-free operation. The most important wear parts are contained in the stitching head cassette and are replaced every 5,000 cycles during cassette changes. This allows for over one million cycles before servicing of the stitching head is required. The BookMaster has a manual adjustment feature for adapting page margins, end sheets, and stitching/folding positions. The TrimMaster cutting unit has a single, self-sharpening blade made of hardened steel for clean trimming of the book's front edge. All cutting waste is transported outside the machine to an external waste container, which allows for continuous operation. Iodsy Idr Hopfx Acrjic The finished brochures are transported to a high-performance discharge conveyor. Additional information: Max sheet format: 482 x 320 mm Min sheet format: 210 x 140 mm Max brochure thickness: 22 sheets Max cutting length: 25 mm 230 volts. Shipping possible, pickup possible, test run possible. Operating manual is also included.

Condition: good (used), Ingersoll Rand screw compressor Iiedoy Eqn Tspfx Acroc

Condition: like new (used), Year of construction: 2019, Ingersoll Rand CDA160 GHH Iisdpfx Acjy Egp Aoroc

Condition: used, Year of construction: 2004, x-travel 3000 mm y-travel 3400 mm z-travel 950 mm surface area 2500x1600 mm no. of tables 2 control NUM Tool changer 12 Pos turning speeds 4,5-40.000 U/min spindle taper: HSK 40 spindle drive 6 kW Table load 850 kg Machine No.: 2259 B +/- 110° C 360° Table size: 6000 mm x 2500 mm (hole pattern 22H7 / M16) Spindle: Manufacturer Fischer, 2 pieces (type MFWS 1709/30 Serial number: 10015020 / 133227) Milling head: Forest Line type: fork head / B-axis +/- 110° swivel / C-axis 360° (infinite) rotation / Station for milling head storage (2 pieces) Chip conveyor: Scraper conveyor / Manufacturer: Richter Tool measurement: Blum Feed: X + Y 30,000 m/min / Z 28,000 m/min Rapid traverse: equals feed rate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Iiedpfxoyqv Eie Acroc If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, machine/vehicle number: FN503832, Year of construction: 2016, operating hours: 1,974 h, load capacity: 8,000 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, fork length: 2,400 mm, drive type: Treibgas, Heavy-duty forklift truck – LPG Iijdpfx Aswzdraecrsc Chassis number: FN503832 Load centre: 500 mm Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Very good Front tyres type: Solid rubber Front tyres condition: 80–100% Rear tyres type: Solid rubber Rear tyres condition: 80–100% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, Tyres: white, non-marking

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 2,818 h, load capacity: 2,500 kg, lifting height: 3,290 mm, load center: 500 mm, fuel type: gas, mast type: duplex, construction height: 2,300 mm, power: 38 kW (51.67 HP), motor manufacturer: Mazda, gearing type: automatic, fork length: 120 mm, tire condition: 75 %, empty load weight: 4,040 kg, immediately ready for use with sideshift, overhauled gas system, new lighting, new UVV and gas inspection, new seat cushion, SE tyres Iisdpey Afr Defx Acrjc

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Ceramic measuring plate from Johannes Fischer Aschaffenburg in laboratory quality, 1000x1000mm Flatness less than 1µm (!) Iiodpfxoix Ahqe Acroc Incl. cabinet base with 2 doors Measuring protocol on request for an extra charge

Condition: used, functionality: fully functional, machine/vehicle number: FN615268, Year of construction: 2020, operating hours: 2,469 h, load capacity: 2,000 kg, lifting height: 6,500 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN615268 Load centre: 500 mm Iiodpfjw H Eiqsx Acrsc ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Solid rubber Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Rear tyres condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: JH Battery type: PzS Battery year: 2023 Battery condition: 80 - 100% Side shifter, integrated lateral lift, front work lights, overhead guard, front windscreen, STVZO, full free lift,

Condition: good (used), Crew container interchangeable body, The container is self-sufficient, can be charged, and has power supply. It is insulated. Side door and 2 hinged doors. Iiodpsyxpbbjfx Acrec Dimensions: 600x250x250 cm.

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm Iisdpfx Aouxft Sscrsc swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds Iijdpfx Aeuxfu Nscrec - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Isdpjuxfucofx Acroic Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Iijdpourw Uyefx Acrjc Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Iiodpfx Acotrf Smoroc Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: good (used), functionality: fully functional, machine/vehicle number: 3005, Foellmer Motor Perforating Machine 45 ME Iijdpfx Acswu Dvforec with creasing and micro-perforation tool (see image) Activation: Electrically via foot switch. Working width: 45 cm / Table size: 60 x 35 cm Performance: Up to 15 sheets (depending on material) Dimensions H x W x D in mm: 1120 x 600 x 1000 Weight: 117 kg Connection: 400 V / Operating manual included. Shipping at buyer's expense possible. Collection possible. Our offers concern used machines, which may show signs of use (minor scratches or yellowing).

Condition: like new (used), functionality: fully functional, Equipment: compressor, MORGANA Digifold Pro By combining creasing and folding in a single unit, the Digifold Pro becomes a highly productive, user-friendly, and mobile finishing center. Perforating is also possible, further expanding its application range. With speeds of up to 6,000 sheets/hour and a maximum format of up to 900 x 358 mm, the new Digifold Pro offers even greater flexibility. A large touch-screen display makes operating the Digifold Pro and all other Pro Generation machines easier. Versatility The Digifold Pro can be used in three different modes as required: - As a creasing machine - As a folding machine - As an integrated creasing and folding machine, performing both functions in a single pass. Feeder: suction feeder draws paper from below Paper format: max. 900 x 358 mm // min. 210 x 140 mm Paper weight: max. 400 gsm // min. 100 gsm Number of creases per sheet: 9 Max. number of folds per sheet: 2 Number of program memory slots: over 1,000 Min. distance between two creases: 40 mm Min. distance between two folds: 70 mm Min. crease distance from leading edge: 50 mm Min. fold distance from leading edge: 50 mm Min. crease distance from trailing edge: 50 mm Min. fold distance from trailing edge: 50 mm Ijdpfxowndzbs Acrsic Fold length: 70 mm; Max. fold length up to 450 mm (automatic feed), up to 1,800 mm (manual feed) Fine adjustment: 0.1 mm increments Max. speed (A4): 6,000 sheets/hour Dimensions (L x W x H): 1,980 x 655 x 1,265 mm Weight: 190 kg Power supply: 230 V Shipping at buyer’s expense. 3-month bring-in warranty. All our offers are for used machines, which may show signs of use (minor scratches or yellowing).

Condition: refurbished (used), functionality: fully functional, overall weight: 600 kg, type of input current: AC, Watkiss PowerSquare 224 Offline / Manual Operation The machine is in very good condition. The PowerSquare is not only versatile, but also extremely easy to operate and produces unbeatable professional brochures. • Booklet maker for brochures up to 56 sheets / 224 pages at 80 gsm • Heavy-duty wire stitch head (completely overhauled) • Product size: Min. feed size: 120 x 200 mm // Max.: 370 x 520 mm • Automatic format adjustment, automatic wire length adjustment • 2 new front edge trimmer blades • 1 - 6 stitches, evenly distributed on the spine. Production of brochures without staples also possible. • Wire from spool: up to 291,500 stitches • Machine has been completely overhauled and operates without defects • Fully automatic machine setup • Immediately operational / production starts from brochure 1 • Test run possible by arrangement • Automatic triggering • 230 Volt / 600 kg • Format range from 120 x 200 mm to 370 x 520 mm Produce unbeatable professional brochures with the PSQ 224. Iodpfx Acexn Rdajroic Euro 27,900.00 plus VAT. Shipping / delivery available. Please note our offers refer to used machines, which may show signs of previous use (minor scratches or discoloration). Collection possible, shipping possible, installation and instruction available.