Used Gilson Fraction Collector for sale (569)

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers Bwjdpfxezpcvdj Abtet 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: new, Year of construction: 2018, Storage location: 100239478 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Standard equipment: 1b) Standard version with a 27.0 m outreach 2c) Radio remote control 2d) Small control panel 3a) Complete with pyramid supports 7) Collector for continuous rotation Bodjzkz Injpfx Abtswt 8) MICROMOVE positioning mode 9) Cast ballast with 4 x concrete ballast blocks, each weighing 910 kg Location: Regensburg

Condition: new, Year of construction: 2020, Storage location number: 100285907 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Standard equipment: 1b) Standard version with 27.0 m outreach 2c) Radio remote control 2d) Small control panel Bodpjzkz Rvsfx Abtewt 3a) Complete with pyramid-shaped counterweights 7) Collector for continuous rotation 8) MICROMOVE positioning mode 9) Cast ballast with 4 x concrete ballast blocks of 910 kg each Location: Regensburg

Condition: like new (used), STA Impianti RE-5 coffee roaster, made in Italy, with a capacity of 5 kg per batch (production of up to approx. 20 kg/h). Machine in excellent condition and working order; very lightly used. Specifications: -Brand: STA Impianti (Italy) -Model: RE-5 -Capacity: 5 kg per batch -Fuel: LPG -Integrated cooling system -Cyclone/chaff collector included -Full control panel Perfect working order Ready to use Ideal for: -Micro-roasteries -Specialty coffee -Artisanal roasting projects -Coffee shops Bodpozla Aaefx Abtswt

Year of construction: 2026, condition: new, DESCRIPTION Horizontal drum chipper, engineered and built for maximum performance and reliability. This heavy-duty, robust machine is suited for the most demanding conditions and is ideal for processing all types of waste wood materials. The Varli VDC-1600 drum chipper features a large infeed opening, making it highly capable of processing waste wood material, logs, and wood bundles (diameters over 700 mm can be easily accommodated). Bwedpfjyi H Ryox Abtjt The VDC-1600 can achieve outputs of approximately 100,000 kg per hour of high-quality pulp mill chips or finer fractions suitable for biofuel production. The chipper can also deliver coarser fractions, producing chips up to 200 mm in length (depending on configuration). Built with a heavy-duty frame, the chipper features over-sized, self-aligning bearings housed in steel casings, firmly secured to the chipper’s side structure for long service life and reliable operation. Equipped with 14 feed rollers fitted with special, wear-resistant, surface-hardened teeth, the VDC-1600 provides secure feed and optimised material throughput. The chipper comes standard with drum-mounted cutting tools made from Hardox, along with replaceable wear plates. OPERATING PRINCIPLE The VDC-series is designed to produce wood chips from logs or bark bundles. Material is horizontally fed by vibrating chute into free-floating feed rollers, which automatically adjust to the material’s height. The feed rollers securely grip and transport the material into a high-speed rotating drum armed with solid knives, fixed with centrifugal wedges—fostering durability, preventing knife damage, and minimizing downtime during tool changes. The rotor knives are easily accessible and can be re-sharpened multiple times. Key features include an adjustable stator knife, hydraulic hood, and hydraulic device for stator knife exchange. BENEFITS - Extremely robust construction and heavy-duty design for stable operation - Centrifugal wedge knife mounting for reduced machine downtime - Adjustable stator knife to extend operating life - Hydraulic hood for swift and easy maintenance TECHNICAL DATA Model: VDC-1600 Infeed Width: 1250 mm Rotor Diameter: 1600 mm Number of Infeed Rollers: 14 Number of Cutting Tools (Knives): 4 Drive Motor(s): 2 x 400 kW Electrical Supply: 400V, 3Phase, 50Hz Fraction Output: 60 mm (SPF), approx. 100,000 kg/h Total Weight: 96,000 kg

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE Bwsdpfx Aoua D Alebtst purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 3K 13/60, fuel type: electric, pre-crusher was used to pre-crush pallets after which they were turned to the right fraction in another shredder. Bodpfsu Abkhex Abtowt Satrind can still be seen working and can be used immediately. power 44 KW is 60 HP

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Bwodpfxou A Thlo Abtjt Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: 1.00m x 1.00m

Condition: refurbished (used), For Sale: EOS P730 – Guaranteed Working Condition This EOS P730 has been fully cleaned and revised by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Synrad 48-5 CO2 lasers, this high-performance machine is designed for demanding SLS production environments. Available Accessories: We offer a variety of optional accessories to enhance your setup, including: • Docking station • Transitube • IPCM P • Unpacking station • Build frames Upgrade Options: Take your EOS P730 to the next level with available upgrades, such as: • Coherent C70 laser upgrade for enhanced performance • Laser window upgrade for improved efficiency • And more! Contact us for details. Materials Highlight We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers excellent performance at a fraction of the cost of OEM powders, helping you reduce production expenses without compromising on quality. Services Included: • Transport & Installation: Safe delivery in original EOS packaging and professional installation services. • Warranty & Maintenance Plans: Flexible options available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: Cost-effective consumables like our plug-and-play PA12, fully tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Choose IM3D for dependable machines, premium materials, and the expertise to maximize your SLS production. Bwedpfx Abjq E I Anstjt Contact us today for more information or specific inquiries!

Year of construction: 2025, condition: new, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips.  Input material: 0-200 mm  Capacity: approx. 80 m³/h (material-dependent) Bodsg I Uqfspfx Abtewt  Material separation into 2 fractions: 0-25 mm and oversized fraction  To be mounted on customer-owned impact plates or a substructure Technical Data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area: 6.3 m², Number of shafts: 40 o Drive: 2 x 7.5 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes) o Bearing lubrication positioned externally; optional central lubrication available at an extra cost

Year of construction: 2025, condition: new, Description:  Screen deck system consisting of 1 deck for separating green cuttings/biomass and old wood with a grain size of 0-100 mm.  Capacity up to 100 m³/h (material-dependent).  Material separation into 2 fractions: 0-100 mm and oversized material.  Screen deck with tarpaulin cover.  Lubrication of the screen deck bearings is routed externally. Technical data:  Screen deck area: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area 5.1 m², number of shafts 20 pieces Bsdjfygd Sjpfx Abtjwt o Drive: 2 x 7.5 kW geared motors o Screen body: Polyurethane (star screen), D 340/9 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes is possible) o Lubrication of the bearings is routed externally; optional central lubrication system available at an extra cost. Delivery time approx. 18 to 20 weeks.

Year of construction: 2026, condition: new, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Bodpfx Ajdzvhwebtewt Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Optimum utilization of bags Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Bulky packaging films and foils Foam foils Optional extras BTS-Foil Bags 240 Ltr. Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Year of construction: 2026, condition: new, Specifications: Bwjdpod Aqznjfx Abtjt - Performance: 1400 kg/h - Electric demands: 3 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 2500x1330x1230 mm - Input height: 1250 mm - Output height: 370 mm - Weight: 1150 kg - IP65 certified electronics - Food industrial, massive polyester belt - Belt: 2mm thick, density: 6x16 filament/cm^2, ½ rate (suitable for large fiber-free juice) - High yield: 75% - depends on the freshness and quality of the fruits - High-pressure washer demand: 500 L/h - Compressed air demand: 50 L/h 6 bar - Built-in inverter: steplessly adjustable belt speed Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean. With 4pcs vibration-free feet. It requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 7.5 kW DCO-7500-N Overview A dust collector is a part of a ventilation system. It is designed to remove suspended particles. This task is fulfilled with a fan rotor and replaceable filter canisters. Using a dust collector improves air quality, making it easier to keep the connected machine clean, and extending its life. Dust collectors are safe for operators and the environment. Bwodpfx Aeium Ipjbtet Specifications - Input voltage: 400V AC 50hz - Efficiency: 3000-4000 m3 - Nominal power: 7,5kw - Filtration area: 40 m2 - Number of filters: 4 units - Filter size: ⌀325 mm - Filter height: 660 mm - Weight: 400 kg - Height: 1980 mm - Width: 1000 mm - Depth: 1000 mm

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Mobile fruit and vegetable processor unit Specifications: -Performance: end product 300 L/h maximum -Input capacity: 300kg/h -Electric demands: 10 kW, 400 V -Heating performance: 30 kW -Fuel: propane, PB, natural gas -Flue gas outlet: 60/100mm concentric chimney -Material: WNr. 1.4301, AISI 304 stainless steel -Dimensions: 6100x2200x2800 mm -Weight: ~2,3 tons (depends on the accessories and options) -IP65 certified electronics -Heat exchanger: soft water -Connections: DN 25 BUILT-IN MACHINES: -Custom made washer with grinder (openable, tiltable) -MKSP 300 belt press (automatic) -MKT 100 juice collector tank with pump (automatic) -Puffer tanks -MKPAG 300 gas fuelled pasteurizer (automatic) -BB TOP 180 semi-automatic filler or Bottle filler with 2 heads -Air compressor -High pressure washer Galvanized steel chassis with aluminium anti-slip floor, and aluminium superstructure. The two sides and the rear side is openable in 90° angle. The openable washer recieves the fruits. After the grinding and pressing, the automatic juice collector towards the juice to the puffer tanks. Then the automatic pasteurizer does the heat treatment, and in the final step, the operator fills the end product in bags or bottles. The machine is as automatic as possible, it needs only 2 workers to operate. Very easy to clean. Requires minimal maintenance. Options: Bwjdjiu Hz Hspfx Abtet -Diesel generator (10kW) -3,2 tons trailer -300L freshwater tank -300L waste water tank -Filtration system -Tent system -Custom graphic design on the outer surface

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Bedpfxjin Ewls Abtjwt Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface Bwodpfoip Uzpox Abtst →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Year of construction: 2005, condition: like new (used), Used 4.4kw Bystronic Byspeed CNC laser for sale Used Bystronic 4.4kw lasers for sale VIDEO BELOW: Byspeed 3015 4.4kw Installed new/year: 2005 Manufacturer: Bystronic Model: Byspeed 3015 Sheet size: 3metre x 1.5metre / 3000mm x 1500mm Laser power: 4.4kw / 4400 watt Bwsdpfx Aoibigaobtet Automation n/a Year: 2005 Condition: good working condition Options Included: Bypos automatic focus CutControl 2 cutting heads Tools and accessories Torit Dust collector Delivery, installation and tuition available at extra cost.

Year of construction: 2026, condition: new, The semi-automatic filler is the perfect solution for small companies that produce up to 5000 bag-in-boxes per year. The system is equipped with: an electromagnetic flow sensor; an electronic control panel - for programming the filling quantity (minimum 1 liter) and - for performing the calibration; and a self-priming pump with a EURO 20 rubber impeller. At the beginning and at the end of the cycle, the vacuum should be controlled by the user and the injection of nitrogen should be managed by means of two manual pulsar valves. The valve is opened and closed using the two stainless steel tools supplied as standard. Drip collector buffer is included in the scope of delivery. The inox holder of Bags has an adjustable height and can be removed. The user selects the desired filling quantity and turns the switch on so that the filling cycle can begin. The filler performs a complete cycle: Opening the valve / Starting the pump / Stopping the pump / Closing the valve. - Touch screen operation for programming capacity and calibration; - Digital flow meter max. 7000 l/h - Stainless steel table with adjustable and removable support, with 4 adjustable feet - Stainless steel filling head - Pulse valve for manual nitrogen injection - Blocking system for the filling head - Drip-free filling - Automatic start and stop for an external pump - Double semi-automatic system for opening and closing the connection - Capacity for filling flexible bags or pouches (high or low type) from 1 liter capacity - S/S- Suitable for cleaning circuit (CIP) Technical data: Bodpjtpxtijfx Abtjwt - Electrical requirements: 220V 50-60 Hz - Suitable for: Ø 20 - 25 mm - Capacity: 5 lt/h 150 pcs. - Capacity: 10 lt/h 100 pcs. - Capacity: 20 lt/h 40 pcs. - Dimensions: 740x900x720 mm - Weight: 50 kg

Year of construction: 2026, condition: new, The semi-automatic filler is the perfect solution for small companies that produce up to 5000 bag-in-boxes per year. The system is equipped with: an electromagnetic flow sensor; an electronic control panel - for programming the filling quantity (minimum 1 liter) and - for performing the calibration; and a self-priming pump with a EURO 20 rubber impeller. At the beginning and at the end of the cycle, the vacuum should be controlled by the user and the injection of nitrogen should be managed by means of two manual pulsar valves. The valve is opened and closed using the two stainless steel tools supplied as standard. Drip collector buffer is included in the scope of delivery. The user selects the desired filling quantity and turns the switch on to start the filling cycle. The filler performs a complete cycle: Opening the valve / Starting the pump / Stopping the pump / Closing the valve. - Touch screen operation for programming capacity and calibration; - Digital flow meter max. 7000 l/h - Stainless steel filling head - Pulse valve for manual nitrogen injection - Blocking system for the filling head - Drip-free filling Bwjdstpxtuepfx Abtot - Automatic start and stop - Double semi-automatic system for opening and closing the connection - Capacity for filling flexible bags or pouches (high or low type) from 1 liter capacity - S/S- Suitable for cleaning circuit (CIP) Technical data: - Electrical requirements: 220V 50-60 Hz - Suitable for: Ø 20 - 25 mm - Capacity: 5 lt/h 150 pcs. - Capacity: 10 lt/h 100 pcs. - Capacity: 20 lt/h 40 pcs.

Condition: like new (used), functionality: fully functional, Year of construction: 2007, laser power: 4,400 W, Used Very Clean 4.4kw Bystronic Byspeed 3015 CNC laser for sale Used Bystronic 4.4kw lasers for sale VIDEO BELOW: Byspeed 3015 4.4kw – Loading system in the video not included Installed new/year: 2007 Bwsdsr Hcm Dspfx Abtjt Manufacturer: Bystronic Model: Byspeed 3015 Sheet size: 3metre x 1.5metre / 3000mm x 1500mm Laser power: 4.4kw / 4400 watt Control: ByVision CNC02 Automation n/a Year: 2007 Condition: good working condition / service from new Byspeed 3015 4400w Turbo Blower Hours: 2,987 hrs – New turbo fitted end of 2023 under Bystronic warranty Good condition machine that has been covered from new by service contract with Bystronic UK Options Included: Bypos automatic focus CutControl 2 cutting heads Tools and accessories Torit Dust collector

Year of construction: 2025, condition: new, Screening deck system consisting of 1 deck for screening of waste wood grain size 0-25 mm capacity approx. 80 m³/h (depending on material) material separation in 2 fractions 0-25 mm and oversize Screening deck with enclosure for suction system upstream acceleration belt with screen deck screwed to one unit +++ Technical data +++ Screen deck 1: Screen deck area length = 4,540 mm; width = 1,215 mm Outer dimensions : length = 4.820 mm width = 1.850 mm Bedpfxjd Rbnge Abtewt Screening area 5,1 m², number of shafts 34 pcs. drive 2 x 5,5 kW gear motors Screen body polyurethane (star screen) D 166 / 12 fingers Screen shafts as plug-in system (adaptation to other grain sizes easily and cost-efficiently possible) Lubrication of bearings placed outside, optional central lubrication possible at extra cost Enclosure 2 mm plates screwed together +++ Acceleration belt +++ drive 1 x 2,2 kW gear motors belt width 1.200 mm belt length approx.3.000 mm Outer dimensions : length = 3.500 mm width = 1.400 mm Delivery time approx. 25 weeks

Year of construction: 2026, condition: new, machine/vehicle number: neu, Description:  Screening machine on hook lift with chassis for on-site transport  Screening into 2 fractions: 0-12 mm and oversize greater than 12 mm  Throughput capacity greater than 80 m³/h (material-dependent) Film separation via separation chamber and extraction fan Conveyor fan positioned beside the machine  Discharge belt, hydraulically foldable  Central control cabinet with networking option to existing machines (emergency stop)  Technical data:  Transport width: 2,500 mm  Transport height: 2,700 mm  Transport length: 7,800 mm  Screen deck: Area length = 4,240 mm; width = 1,200 mm o Screen area 5.4 m², number of shafts 32 o Drive: 2 x 7.5 kW geared motors, speed-controlled (frequency inverter) o Screen body: Polyurethane (star screen) o Screen shafts as plug-in system (adaptation to other grain sizes is easy and cost-effective) o Central lubrication of the screen deck bearings (64 lubrication points)  Hopper: Capacity approximately 3 m³ o Drive: 2.2 kW geared motors, speed-controlled (frequency inverter)  The A-belt and oversize belt are assembled on-site using a plug-in system o Total power: 26.5 kW o Hydraulics: via 24 V battery with integrated charger  Color: black RAL 9017 / green RAL 6018 Bedpfx Asd Rbyhsbtswt or according to customer specifications Description:  Conveyor fan for extracting and discharging floating plastic films on the screen deck (maximum part size L = 1,000 mm)  Suction hose D 300 mm  Pressure hose D 350 mm  Fan in frame positioned beside the screening machine with attachment points and forklift tines  Control cabinet with ABB 15 kW frequency inverter, control unit located externally (control cabinet door)  Networking option to existing machines (emergency stop) Delivery time approximately 25 weeks.

Condition: new, Year of construction: 2024, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Bodpfx Aboflpi Nstjwt Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 2,400 mm, total length: 3,500 mm, grinding width: 180 mm, grinding wheel diameter: 250 mm, Equipment: documentation/manual, GRAFS GR-2400e is heavy-duty straight knife grinder / vertical surface grinder with swiveling electromagnetic chuck, suitable for a broad range of industrial knives, such as guilotine knives for metal, granulator blades, veneer knives, chipper knives, planer and paper and knives HM / HSS for paper cutters. We are a sharpening shop for over 12 years. All our machines are in 100% build in GRAFS factory in Poland. TECHNICAL FEATURES / MAIN ADVANTAGES: • Mitsubishi Touch Screen operation panel HMI 7"; • Mitsubishi PLC, • Mitsubishi Inverter for carriage run adjustment / feed, • Internet communication system with GRAFS technical support in case of any problems, • Grinding wheel motor 11 kW (15 HP), 400-3-50 Hz; • Grinding wheel Ø250mm corundum in aluminum base, (segment grinding wheel upon request); • Reversal of grinding wheel rotation; • Electromagnetic chuck 180x2400 mm; Surface grinding 180x2400mm, Bsdpfx Aed Tc Haebtowt • T channel on the other side of the chuck (from operator side), • Angular divisor for magnetic table rotation ±120°; • Fast grinding wheel descent and ascent (by switches) and slow approach by hand wheel; • Motorized automatic grinding wheel downfeed, controlled by Mitsubishi PLC (0.001-0.05 mm); • Automatic work cycle (roughing, sparkout); • Variable carriage speed from 1 to 16 m/min; • Coolant through 2 nozzles either side of the grinding motor; • Longitudinal grinding head angle adjustment from 0° to 5°; (flat surface grinding possibility), • External tank with pump; • Magnetic cleaner / filter MODEL MS, • Fast grinding wheel exchange system, grinding wheel adapter with 3 securing screws, • Exchangable hardened steel strips on machine body guides, 2 at the top, and 2 at the bottom of main guide. • Carriage rollers from INA, on on the regulated cam, • Heavy body of the machine (steel plates 10 mm thick), build in cell design, • Electric cabinet on Shneider components, • Secure cover of the grinding wheel with magnetic interlocks, • User manual and control panel menu in Polish / English / German / Czech / Spanish / French, • Machinery LED lamp in working area, UPON REQUEST: • Different types of knives mounting, • Coolant cleaner with automatic paper filter, • Main grinding motor can be 5.5 kW, 7.5 kW and 11 kW, • The knife sharpening machine model GRAFS GR can be supplied in 4 different grinding lengths: 1.200 mm, 1.800 mm, 2.100 mm and 2.400 mm. • Accordion covers on whole body of the machine, • Mist collector, We provide an European Declaration of Conformity and all documents. The machine is new, we are a producer from Poland, we provide after sale support and service with 12 month's warranty.