Used Gm Gera Bottle Cleaning Machine for sale (68,084)

Condition: new, functionality: fully functional, Year of construction: 2026, MTP 3000 W handheld laser cleaning machine – Metal Technics Polska Remove rust, paint, oil, oxides and coatings in seconds – with no abrasives, no chemicals and no damage to the base metal. The MTP 3000 W is a mobile continuous-wave fibre laser cleaning machine with a handheld cleaning gun, built for workshops, metal fabrication, tool and mould shops, restoration and pre-weld surface preparation. KEY ADVANTAGES • 3000 W laser power for fast cleaning of large surfaces • Dry, contactless process – no consumables, no blasting media, no waste chemicals • Cleans rust, paint, oil, oxide layers and fouling without damaging the parent metal • Works on cast iron, carbon steel, stainless steel, die steel and aluminium • Colour touchscreen with selectable scanning (swing) mode, red guide light and laser control • Key switch, emergency stop and dedicated Power / Light / Control / Laser / Beam buttons • Fibre laser source with armoured fibre cable and lightweight handheld cleaning gun with protective lens • Compact cabinet on four castor wheels – easy to move around the workshop TYPICAL CLEANING PERFORMANCE (manufacturer data) • Cast iron, severe corrosion (0.08 mm): focus depth >35 mm, 18–30 m²/h • Carbon steel plate, moderate corrosion (0.05 mm): >40 mm, 15–24 m²/h Dodez Izlrepfx Ap Djwc • Stainless steel plate, oil stains and slight rust: >50 mm, 18–30 m²/h • Die steel gear, oil with iron filings: >45 mm, 14–23 m²/h • Aluminium plate, oxide / surface fouling: >35 mm, 12–20 m²/h • Paint removal, baked white varnish (0.1 mm), no putty layer: >20 mm, 18–30 m²/h Condition: new, year of manufacture 2026. Power supply: 400 V or 230 V – available in either version. Availability: made to order, delivery lead time 90 days. Terms: EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Documentation and manual included. Delivery to any address in Europe can be arranged with our own transport company – delivery quote on contact. Technical advice and after-sales support from Metal Technics Polska.

Year of construction: 2001, condition: used, New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletiser with lifting frame Capacity: 140 layer/h Power: 8,75 kW Voltage: 230/400 Volt Dwjdpfx Apox T Ai Ie Djc Frequency: 50 Hz Compressed air: 5,0 bar; 8,0 Nm³/h Length: 4020 mm Width: 3400 mm Height: 5425 mm Weight: 3800 kg Formats: europalett (1200 x 800 x 140 mm) Operation / Control: control box / Siemens S7 Material: Painted mild steel Position: free standing Base construction: Square tube frame Features: Pallet infeed, -outfeed, -magazine; base frame with lift truck, shaft walls, layer pad gripper, clearing table, linear unit, push flap, centring, push-off plate, cardboard lifter, magazine, slip lid magazine, stairs/platforms, protective grille, control system Periphery: Bottle conveyor belts approx. 20 m, pneumatic transport approx. 50 m

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Dsdpfszlgglex Ap Dewc Very easy to clean. Working width: 520 mm Power supply: 380 V Weight: 250 kg Made in Italy.

Condition: used, Year of construction: 2010, functionality: fully functional, Curio C-427-S Fish Heading Machine – 2010 Used Curio C-427-S automatic fish heading machine for whitefish processing. The machine is designed for automated removal of fish heads and can be integrated upstream of a filleting machine. Machine details: - Manufacturer: Curio - Model: C-427-S - Year: 2010 - Serial no.: EH091020 - Application: whitefish heading - Electrical supply: 400 V / 50 Hz / 3 phase - Current: 16 A - Stainless-steel construction - Pneumatic controls - Variable-speed drives - Operator control panel - Emergency-stop system Suitable for processing: - cod - haddock - saithe - pollack - other similar whitefish species Features: - automatic heading process - stainless-steel frame - operator infeed table - adjustable machine speed - forward / reverse jog - pneumatic adjustment system - electrical cabinet - frequency converters - emergency stop - safety guarding - integration possibility with downstream filleting equipment The C-427-S has historically been used together with Curio C-189-L filleting machines as part of complete whitefish processing systems. Dwsdpjz Iav Nofx Ap Djc Machine available for inspection. Additional photographs and information available on request. Price on request.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 100281518, total height: 2,260 mm, total width: 1,550 mm, total length: 1,685 mm, product height (max.): 310 mm, product width (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS X-ray Generator Voltage: 30 – 75 kV Djdpfx Asy Ath Hjp Dowc Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Power supply: 200 – 240 V Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp. Dwodpfjnzh Absx Ap Doc

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Dwsdpfx Aomk I Dwsp Dsc

Condition: used, Year of construction: 2017, operating hours: 89 h, functionality: fully functional, machine/vehicle number: U02424, fuel type: electric, construction height: 1,100 mm, drive type: Elektro, sweeping width: 900 mm, Vacuum sweeper Dwodpfx Aswlwfhsp Dec VIN: U02424 Technical condition: very good Battery voltage: 36V Battery Ah: 210Ah Battery type: Gel Battery year of manufacture: 2025 Battery condition: New Description: Tennant 6100 No.: R0570 Year of manufacture: 2017 Operating hours: 89 Easy to use 970 mm working width 560 mm main brush length 970 mm working width Maintenance-free battery 36 V / 210 Ah External charger 90 kg debris hopper Easy to empty Battery runtime up to 3.4 hours Weight including battery: 503 kg Up to 3,270 m² area performance per hour Multi-stage filter system The machine is in very good visual and technical condition. Fast and uncomplicated transport is possible upon request! The advertisement is for identification purposes only. A detailed description of the condition and possible equipment is available upon request! Errors and prior sale excepted. Sale to commercial customers only. All sales of used goods are made without warranty or guarantee. If you haven't found the forklift you're looking for, please contact us. We have a large selection of other equipment on site.

Year of construction: 2026, operating hours: 1 h, condition: new, URANUS URM-KM60 Industrial Coffee Roasting Machine – 60 kg/batch capacity. Professional coffee roasting machine manufactured in Turkey. Designed for consistent and high-quality roasting with precise control of roasting temperature, drum speed and airflow. • Batch capacity: 60 kg • PLC controlled automatic roasting system • Recipe/profile saving and repeat roasting • Adjustable drum speed and airflow • Gas heating system • Stainless steel contact parts • High-capacity cooling tray with powerful cooling fan • Easy operation and maintenance • Suitable for industrial coffee production Dwjdpfx Aez D Aidjp Dsc • Brand new – 2026 production • CE compliant Manufactured by Uranus Roasting Machines in Denizli, Turkey. Worldwide shipping and installation/support available.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1,500 kW (2,039.43 HP), Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, and weld cleaning — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types. You can give our managers a call for additional details! Wattsan 4in1 G2 characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Dodpfx Aerztdrop Djwc Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2000, condition: used, Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h Dwodow Taxfspfx Ap Dec Additional title: Bottle washing machine Capacity: 39000 Bottles/h Length: 12700 mm Width: 4700 mm Height: 3500 mm Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW Operation / Control: Simatic S7-300 Position: free standing Base construction: Single-end machine, self-supporting housing on dome feet Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station Layer patterns: 22 bottles per basket row

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1,500 kW (2,039.43 HP), total height: 1,055 mm, overall weight: 235 kg, Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, weld cleaning, and energy storage welding — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types and multiple types of weld clean. You can give our managers a call for additional details! Wattsan 5in1 G2 Pro characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Dsdpfx Ajrztrmop Dowc On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2003, Labelling machine Krones Prontomatic Type 12-6/6-4, year of manufacture 1994 - reconditioned. Capacity: 13500 bph Swing-top label Voltage: 400 V Frequency: 50 Hz Dodpsxbpggjfx Ap Djwc Length: 2450 mm Width: 2000 mm Height: 2500 mm Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l Machine partitioning: 180mm Running direction: Right - left Operation / Control: Simatic S7-300

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency Dwodpoxm Szqsfx Ap Dsc -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Year of construction: 2021, condition: good (used), Sole cleaning machine, shoe cleaning machine -Manufacturer: Today, sole cleaning machine, shoe cleaning machine -Type: Solamat 100 Dodpfx Ajzrfyksp Dowc -Power supply: 230 volts -4 roller brushes: for the soles (nylon) -2 round brushes: (nylon) for the side edges -1 Upper leather brush: (horsehair) -Dimensions: 560/460/H1090 mm -Weight: 59 kg

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 16803, fuel type: electric, empty load weight: 750 kg, total length: 1,810 mm, construction height: 1,500 mm, drive type: Elektro, construction width: 1,225 mm, sweeping width: 1,000 mm, Sweeper-scrubber machine Chassis number: 16803 Condition: As new Technical condition: Very good Battery voltage: 24V Battery capacity: 240Ah Battery manufacturer: Hoppecke Aquamatic Battery type: PzS Dwjdpfxoyytixe Ap Dec Battery year: 2024 Battery condition: 80 - 100% Description: 1,000 mm working width, 6,000 m²/h surface performance, 120 l container capacity, hydraulic high dump, round filter, automatic filter cleaning, 3.5 h battery runtime, right-hand side brush, gradeability 12%, working speed 6 km/h, suitable for indoor and outdoor use.

Condition: ready for operation (used), Suitable for: - Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing - Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes - Cosmetics: shampoos, creams, shower gels, oils, lotions Dodjyxpqcopfx Ap Dewc Piston filler with 4 volumetric filling heads, with upward dispensing Manual cap placement by operator Automatic capping unit Incl. 80-liter heated tank with mixer Up to 2,000 bottles per hour

Condition: new, Year of construction: 2025, Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. Two containers can be capping per cycle and ensures a higher output per min due to the two screwing device heads. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; conveyor belt speed: 13m/minute; cap diameter: customized; power: 220V, 3.5kW; compressed air: 3-5bar, 0.1m³; materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic; machine dimensions and weight: L1450xW850xH1600mm, 350kg; Conveyor belt dimensions: Length approx. 2200mm (may be adapted), width approx. 110mm (customized). Djdpfev Nk Urox Ap Dowc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2013, operating hours: 915 h, functionality: fully functional, power: 24 kW (32.63 HP), fuel type: diesel, empty load weight: 1,700 kg, total length: 3,126 mm, construction height: 1,969 mm, drive type: Diesel, construction width: 1,090 mm, sweeping width: 1,850 mm, Street sweeper Speed class: 25 Condition: Ready for use and fully functional Technical condition: normal Description: Machine completely inspected in the workshop, cleaned, and passed new UVV and inspection! - Rear-view camera and monitor - Reversing light - Working light on the right - Universal tires - Safety package - Spreader cable - Driving speed 20 km/h - Lubrication points for container and sweeping unit - Seat with mechanical suspension - Universal suction container with circulating water system - High-pressure cleaner - Sweeping unit with 2 brushes - Suction nozzle attachment - Disc brush, plastic - Hand suction hose Dwodezk Sghspfx Ap Dec

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Dwodpexpxyrefx Ap Dsc Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting Dsdpfx Apjxp Urde Dewc

Year of construction: 2000, condition: excellent (used), 1 x Parts Cleaning System Malmkvist Turbex 2000 Year of manufacture: approx. 2000 with heating 3 selectable programs: - Washing + drying - Washing - Drying Wash and dry times are adjustable. In very good condition. Technical data: Max. load weight: 20 kg Dedpjy I Nr Eofx Ap Dewc Drum diameter: 400 mm Drum length: 500 mm Heating capacity: 6 kW for dry air blower as well as washing medium Temperature adjustable 0 - 80 degrees Accessories: 3 x washing baskets with three different hole diameters (1.5/2.5/5 mm) + Rack (homemade) 1 x roller conveyor with loading/unloading chute Operating manual + wiring diagrams The machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2004, ➢ Speed 10-80 m/min. ➢ Minimum Sheet Size: 22 x 30 cm ➢ Maximum Sheet Size: 72 x 102 cm ➢ Sheet Production: >10.000/h ➢ Sheet Weight SF: 100-600 g/m2 ➢ Adhevise Application SF: 1.5 – 4.0 g/m2 Dwjdpfx Ajyzcikjp Doc ➢ Working Width 72 cm ➢ Film Thickness 10-50 µM ➢ Film Roll Diameter 350 mm ➢ Energy Consumption 24/66 kW ➢ It is Very Good Condition ➢ Available Immediately.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Dedpoy Uquhefx Ap Dowc Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, controller model: Siemens HMI Simatic PC FI 15, product height (max.): 150 mm, product length (max.): 100 mm, product width (max.): 85 mm, Fully automatic and continuous high-performance cartoner for packaging bottles, vials, or similar objects, with simultaneous leaflet insertion into folding cartons featuring same-side tuck-in flaps. The system consists of the following components: - Product bucket conveyor - Folding carton conveyor - Folding carton magazine - Leaflet folding unit TECHNICAL DETAILS Maximum output: 250 folding cartons per minute Format range, min.: 25 x 15 x 65 mm Format range, max.: 100 x 85 x 150 mm Dsdpsxt Hauofx Ap Djwc MACHINE DETAILS Control system: Siemens HMI Simatic PC FI 15 EQUIPMENT - GUK 21/4 leaflet folding and feeding unit (4-fold folding possible) - Nordson 3400 V hot melt glue unit - Two plastic hinged plate belts (product bucket conveyor) - Color imprint coding at the coding station