Used Gravimax Gravimetric Dosing Devices for sale (12,630)

Year of construction: 1990, condition: used, Used to work with multi-spindle automats Precoat filter oil 2.100 l/min Rodpfx Aew T Tn Hobhew *

Year of construction: 2009, condition: used, KSS/filter/cooling systems Emulsion Redpfx Ajw Tbnuebhsw *

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. Rodpezf E Hqofx Abhjw The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width Rodpfxszf E Dve Abhow - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: used, TECHNICAL DETAILS - Rated power : 38 [kW] - Power consumption : 0.013 [kW] WEIGHT & DIMENSIONS Redpowttdpsfx Abhew - Machine weight : 300 [kg]

Condition: used, TECHNICAL DETAILS - Rated power C1 : 24 [kW] - Rated power C2 : 14 [kW] - Power consumption : 16.7 [kW] - Gas load in C1 : 5 [kg] Redpfsylp Ugsx Abhow - Gas load in C2 : 3.3 [kg] - Max. storage temperature : 45 [°C] - Max. refrigerant temperature : 95 [°C] - Min. refrigerant temperature : -10 [°C] - Max. permissible pressure HP : 40.5 [bars] - Max. permissible pressure LP : 15 [bars] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine weight : 450 [kg]

Condition: used, TECHNICAL DETAILS - Voltage: 400 V / 50 [Hz] Rjdpfex Tvinox Abhew - Power: 37 kW at 40 [°C] - With water/water variant - Refrigerant R134A - 7.6 kg / 10.9 tco2 - 20.6 bar max. - Pump volume flow: 4.0 m3/h at 66.6 l/min - Water quantity for cooling the system: 3.9 m3/h at 65 l/min - Dimensions (L x W x H): 1940 x 880 x 2000 [mm] - Weight: 644 [kg]

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis -Drive motor: 0.55 kW / adjustment motor 0.085 kW Rsdpfx Abev Uwlnehow -Load capacity: 5000 kg -Roller spacing: 270 - 870 mm, rollers Ø 230 x 150 mm total width -Unwinding speed: 0.025 to 1.0 m/min Right/left rotation, Left rotation only continuous operation -Control unit: with hand control and foot pedal -Rail width: internal dimension 940 mm -Individual components: see photos -Transport dimensions: 1020/1020/H635 mm / 1020/500/H635 mm / 600/480/H955 mm -Total weight: 844 kg

Condition: excellent (used), Year of construction: 2020, Composition: • Stainless steel mixing tank with agitator • Additive tank with pump • 5 solid material feeders (flour, rye, etc.) • Horizontal screw mixer • Integrated CIP cleaning system • Complete sanitary piping system • Process pump • Full electrical panel with recipe control Power supply: 380-400V Documentation available Rjdpeyyv I Dsfx Abhjw

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Manufacturer: Edalco, Thread cutting attachment with slip clutch Rjdpfx Absza Tgcohew -Type: Edalmatic EDM-R 1030 -Thread cutting sizes: M10 - M30 -Integrated reversing gearbox: with rapid return -Recording: MK5 -Tap chuck: Ø 22 mm -Dimensions: Ø 123 x 475 mm -Weight: 9 kg

Condition: used, Year of construction: 1998, liter capacity 250 l/min conveying height ca. 2 m coolant capacity 500 l total power requirement 16 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 2,0 x 0,8 x 1,6 m Used mobil filter system for cleaning of coolant - take the dirty coolant out of the machine - clean the fluid with a band filter Rjdpfszawgyex Abhsw - use the 500 l tank - take cleaned cooland back to the tool machine - or use the high pressur gun to clean up the machine

Condition: used, Year of construction: 2015, functionality: fully functional, High-precision strip feeder manufactured by Zehnder & Sommer, Germany, designed for accurate and reliable feeding of metal strip in stamping, punching, and forming applications. This feeder is ideal for integration with high-speed presses such as Bruderer, Schaal, Mabu, Bihler, and similar machines. Zehnder & Sommer feeders are known for their exceptional Swiss engineering, compact design, and excellent feeding accuracy, making them suitable for demanding industrial environments and high-speed production lines. Technical Specifications Manufacturer: Zehnder & Sommer Model: EVD 220 DG S Strip width max.: 200 mm Roll opening (max strip thickness): 4.0 mm Maximum material cross-section: 50 mm² Feed length range: 0 – 19,999 mm Feed accuracy: ± 0.1 mm Redpfxozav Rdo Abhjw Maximum feeding speed: 150 m/min Pulling force: 70 N Weight: 10 kg High precision feeding for stamping and forming applications Compact and lightweight industrial design Suitable for high-speed press automation Reliable swiss manufacturing quality Easy integration into existing production lines Ideal for fine stamping, electrical components, and precision metal parts production

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Rjdpfx Abey A Tpqehsw Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Rodpfecnw T Iox Abhjw High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Rjdpfxecdy I Rs Abhjw Immediately available Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Rodpfx Ascnw U Dobhew Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: Rjdscqy I Sjpfx Abhsw IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: Rsdsu Nwfuopfx Abhow - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm Redpfx Aeu Nwwdjbhsw total power requirement: 4,0 kW dimensions L x W x H: 0,6 x 1,1 x 2,2 mm - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation *

Condition: used, Technical details: Rodpsu Nw Enefx Abhjw tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS SYSTEM The system has been dismantled. We are selling the system/parts at cost price! Areas of application, e.g.: All types of contaminants are filtered out. e.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014. i.D. *

Year of construction: 1998, condition: used, Technical details: total power requirement: 1,1 kw volume capacity: 900 m³/h filter surface area: 6,0 m² filter: 1 Stück weight of the machine approx.: 125 kg dimensions L x W x H: 0,74 x 0,62 x 1,8 m Applications: Suction of grinding dust, with other filter inserts is also welding smoke extraction possible - mobile device with rolls - with collecting container for coarse particles - cleaning interval adjustable up to 60 sec - Impulse cleaning, automatically after switching off the system - filtering separator Further technical data: - separation area 6.0 m² - separation rate above 99% - cleaned air remains in the working chamber - in the device is cartridge filter Ø 400mm, length 270mm - filter change manual by hand (maintenance door) Redpfeu N Ad Nox Abhjw *

Condition: used, Technical details: width: 655 mm depth: 500 mm height: 500 mm weight of the machine ca.: 197 kg dimension L-W-H: 420 x 655 x 500 mm model: angular frame with double stiffness vertical plate: - size W: 655 x H 500 x thickness: 40mm - with clamping holes, long holes and center hole foot plate: - size: B:655 x L:420 x thickness : 40mm - with long holes Redpfx Abou N D Snehow *

Condition: used, Technical details: width: 700 mm depth: 600 mm height: 910 mm weight of the machine ca.: 440 kg dimension L-W-H: T: 600 x B: 700 x H: 910 mm Steel plate welded, 80mm thick, with stiffener surface finished Clamping surface vertical: 6x T-slot according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; distance 140mm Redpfx Abeu N Eatjhow Clamping surface foot: L: 600mm x W: 700mm, 7x clamping hole *

Condition: used, Technical details: width: 400 mm depth: 335 mm height: 500 mm Rodpeu S Hywofx Abhew weight of the machine ca.: 100 kg T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm *

Condition: used, Technical details: width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Two of these clamping brackets are for sale. Material made of steel, surface finished T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm Rjdpfx Asval Nrebhew There are 4 M24 holes each on the side wall (left-right) *