Used Gubisch 21-16- Four Side Moulder Gubisch (Use for sale (67,341)

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,444 h, load capacity: 3,000 kg, lifting height: 4,120 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,900 kg, total length: 1,940 mm, drive type: Diesel, construction width: 2,200 mm, Four-Way Side Loader Load Centre: 600 Djdpfxsznpc Is Adrekr Fork Width: 150 mm Fork Thickness: 50 mm Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Cushion Front Tyres Size: 16x7x10.5 Rear Tyres Type: Superelastic Rear Tyres Size: 23x10-12 Description: In addition to this COMBILIFT model, we currently have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance and side loaders available in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing on favourable terms are always possible. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our proprietor, Mr Peter Sawitzki, will be pleased to provide you with comprehensive advice on this C3000. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul and custom builds for forklifts from 8 tonnes upwards. We can also exhibit your vehicle for consignment sale upon request. Fork Positioner, Full Cabin, Platform Height: 490 mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,799 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, fork carriage width: 1,250 mm, fork length: 600 mm, empty load weight: 5,024 kg, total length: 2,950 mm, drive type: Elektro, construction width: 1,640 mm, Four-way side loader Load center: 350 Fork width: 125 mm Fork thickness: 40 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Dodpfx Ajwkxgdodrokr Battery voltage: 48V Battery Ah: 620Ah Battery year of manufacture: 2013 Description: In addition to this Bulmor model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this EMU 25 ST GT N. LK6.7 P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We also offer consignment sales for your vehicle. Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,902 h, load capacity: 2,400 kg, lifting height: 4,150 mm, fuel type: electric, mast type: simplex, construction height: 2,940 mm, fork carriage width: 2,575 mm, fork length: 1,000 mm, empty load weight: 6,525 kg, total length: 3,350 mm, drive type: Elektro, construction width: 2,150 mm, Four-way side loader Load centre: 500 Fork width: 125 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Battery voltage: 80V Battery capacity: 620Ah Battery year: 2020 Description: In addition to this Votex-Bison model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing on attractive terms are always available. We also buy your used vehicle directly, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this Compact 2504. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment, and custom modifications for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for consignment sale in our warehouse. Fork positioner Dedex Stmuopfx Adrokr Platform height: 430 mm

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way sideloader Djdpfx Aeu Dy A Esdrskr Load center of gravity: 800 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Drums Front tires size: 660/250-480 Rear tires type: Drums Rear tires size: 413/178-285.8 Battery voltage: 80V Battery Ah: 775Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Fork positioner, Platform height: 530 mm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 427 h, load capacity: 2,000 kg, lifting height: 4,980 mm, free lift: 1,240 mm, fuel type: electric, mast type: triplex, construction height: 2,910 mm, fork carriage width: 3,160 mm, fork length: 1,795 mm, empty load weight: 10,036 kg, total length: 3,530 mm, drive type: Elektro, construction width: 3,460 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Cushion tires Battery voltage: 80V Battery capacity: 775Ah Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing under attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this PKD 20/21/50. Dedpfjyvwcuox Adrokr P.S.: Our master workshop specializes in repair, maintenance, overhaul, and customization for forklifts starting at 8 tons. We are also happy to offer your equipment for consignment sale at our premises. Fork positioner, Full free lift, Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 7,009 h, load capacity: 3,000 kg, lifting height: 4,550 mm, free lift: 2,130 mm, fuel type: gas, mast type: duplex, construction height: 2,830 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 1,930 mm, drive type: Treibgas, construction width: 2,270 mm, Four-way sideloader Load center of gravity: 600 Fork width: 150 mm Fork thickness: 45 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Bandages Front tires size: 16x7x10,5 Rear tires Type: Superelastic Rear tires size: 23x10-12 Djdevg Taxopfx Adrekr Description: In addition to this Combilift model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this C3000 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Heating, full cab, full free lift, Platform high: 480 mm

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 14,440 h, load capacity: 3,000 kg, lifting height: 4,600 mm, free lift: 2,180 mm, fuel type: gas, mast type: duplex, construction height: 2,850 mm, fork carriage width: 1,200 mm, fork length: 1,400 mm, empty load weight: 5,300 kg, total length: 2,000 mm, drive type: Treibgas, construction width: 2,470 mm, Four-way Side Loader Load Center: 600 mm Fork Width: 150 mm Fork Thickness: 50 mm Mast Type: Duplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Cushion tyres Dsdjzdv Tfepfx Adrjkr Front Tyres Size: 16x7-10.5 Rear Tyres Type: Superelastic Rear Tyres Size: 23x10-12 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock in our warehouses in Hamburg and Gdańsk. Visit our homepage at sago-online. Lease-purchase and financing on favourable terms are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C3000. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for commission sale at our premises. Sideshift fork positioner, Heater, Full cabin, Full free lift, Platform height: 500 mm

Condition: excellent (used), Catalog number: 7294 TECHNICAL DATA - Max. width of workpiece: 230mm - Min. width of workpiece: 15mm - Max. height of workpiece: 160mm - Min. height of workpiece: 10mm 7 spindles: 1) Horizontal, lower, 230mm, 7.5kW 2) Vertical, right, 160mm, 5.5kW 3) Vertical, left, 160mm, 5.5kW 4) Vertical, right, 160mm, 5.5kW 5) Horizontal, upper, 230mm, 7.5kW 6) Horizontal, upper, 230mm, 7.5kW 7) Horizontal, lower, 230mm, 5.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - Motor: 2 x 0.37kW Dodpfx Adjzab Nforekr - Spindle diameter: 40mm - All spindles equipped with a brake From above: - 8 feeding rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, pulling, rubber, double From below: - 1 feeding roller, toothed, pulling, swiveling - 3 discharge rollers, pulling, metal, smooth - Rollers are pneumatically pressed - Length of the feeding table: 2480mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth feed speed adjustment via frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Diameter of the dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5520x1930x1900mm - Weight: approx. 4000kg ADVANTAGES - 7 heads - Ideal for both wet and dry wood - With ATS - Original DTR + CE documentation - Unpainted - Used planer, in perfect condition Original photos Net price: 156900 PLN Net price: 37360 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8034 TECHNICAL DATA - max. width of workpiece – upper roller: 510mm - max. width of workpiece – lower roller: 450mm - max. thickness of workpiece, 2-sided: 200mm – from the top: - ejectors - 1 toothed metal feed roller - 2 metal feed rollers, sequential - 1 toothed metal feed roller - pressure roller - 510mm planing roller, 4 knives, with the possibility of fitting profile knives, approx. 7.5kW - pressure roller - smooth metal feed roller - upper pressure roller at the outlet with 2 rubber feed rollers – from the bottom: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing roller, 4 knives, 7.5kW - 2 smooth metal feed rollers – from the back: - 2 side spindles 1) vertical, right, 200mm, 6.6kW 2) vertical, left, 200mm, 6.6kW - spindle diameter: 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged alternately - electric height adjustment - 2 types of feed speed + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle: 2x125mm, 145mm, 130mm - dimensions (L/W/H): 3200x1740x1650mm + control unit - weight: 2100kg ADVANTAGES – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing rollers + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11643 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations) Dedpozkvalsfx Adrekr

Condition: excellent (used), planing width 230mm feed on gimbals (7.5 kW) 10 heads: 1 bottom 7,5 kW 2 right 7,5 kW 3 left 7,5 kW Dkedpjuldn Hofx Adrsr 4 right 7.5 kW 5 left 7.5 kW 6 top 7.5 kW 7 bottom 7.5 kW 8 top 7.5 kW 9 bottom 7.5 kW 10 universal 4 kW

Condition: excellent (used), CATALOG NUMBER 7220 TECHNICAL DATA - Min – max working width: 20 – 230mm - Min – max working height: 8 – 160mm 7 spindles: 1) Lower horizontal 230mm 5.5kW 2) Right vertical 160mm 5.5kW 3) Left vertical 160mm 5.5kW 4) Right vertical 160mm 5.5kW 5) Left vertical 160mm 5.5kW 6) Upper horizontal 230mm 7.5kW 7) Lower horizontal 230mm 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindle speed: 6000rpm From above: - 10 toothed steel infeed rollers, including 2 double rollers - 3 lateral pressure units From below: - Lateral pressure unit at the infeed - Toothed steel twisting feed roller in lower table - 2 lateral pressure units - Ribbed worktable - Ribbed steel feed roller - Smooth steel feed roller - Pneumatically adjustable rollers Dodpezkrnfsfx Adrjkr - Infeed table length: 2410mm - Centralized table lubrication - Electric thickness adjustment - Body raising motor: 1.1kW - Stepless feed speed adjustment via inverter: 6–30m/min - Feed motor: 5.5kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameter: 7x160mm - Dimensions (LxWxH): 5100x2190x1800mm - Weight: 5400kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry wood – DTR technical documentation included – Used planer, very good condition Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change significantly if the exchange rate fluctuates)

Condition: excellent (used), Catalog number 6338 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 160mm, 5.5kW Dkjdpfjzkrm Uex Adrsr 3) Vertical, left: 160mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, lower: 230mm, 7.5kW 7) Universal: 360°, 230mm, 7.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm - All spindles are equipped with a brake - Spindle speed: 6000 rpm Top: - 6 toothed, metal feed rollers, including 2 double rollers - 4 toothed, rubber feed rollers, including 1 double roller - 3 pressure rollers at the outfeed Bottom: - Side pressure roller at the infeed - Toothed, feed roller, swiveling, in the lower table - 3 smooth, metal feed rollers - Rollers are pneumatically adjustable - Length of infeed table: 1190mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth adjustment of feed speed on a frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed via Cardan shafts - Enclosed in a cabinet - Diameter of dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5100x2070x1900mm - Weight: approximately 5000kg ADVANTAGES – Equipped with 7 heads – Universal spindle – Ideal for both wet and dry wood – Spindles equipped with brakes - DTR documentation – Used planer, very good condition Net price: 115900 PLN Net price: 27595 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,071 h, load capacity: 2,500 kg, lifting height: 5,600 mm, fuel type: electric, mast type: simplex, construction height: 3,510 mm, fork carriage width: 1,520 mm, fork length: 770 mm, empty load weight: 7,100 kg, total length: 3,350 mm, drive type: Elektro, construction width: 2,150 mm, Four-way side loader Load center: 530 Fork width: 150 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2023 Description: In addition to this Votex - Bison model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always available. We are also pleased to purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice about this compact model. P.S.: Our master forklift workshop is specialized in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons onwards. We can also consign your vehicle for sale at our facility. Platform height: 380 mm Dedpfx Asyvwczodrskr

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,984 h, load capacity: 5,500 kg, lifting height: 6,540 mm, free lift: 2,280 mm, fuel type: electric, mast type: triplex, construction height: 3,420 mm, fork carriage width: 3,460 mm, fork length: 1,800 mm, empty load weight: 10,776 kg, total length: 3,300 mm, drive type: Elektro, construction width: 2,940 mm, Four-way side loader Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2021 Description: In addition to this Hubtex model, we currently have around 200 heavy-duty forklifts, compact forklifts, standard forklifts & side loaders available in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing at attractive rates are always possible. We are also happy to purchase your used machines outright, even if you do not buy a unit from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail regarding this MQ55. Dkjdoy Sqctopfx Adrer P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom construction for forklifts from 8 tons upwards. We are also happy to consign your vehicle for sale in our facility. Fork positioner, Fork positioner opening range: 560 / 3,460 mm Full free lift, Platform height: 410 mm

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount Dsdszl Hbiepfx Adrekr - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: Dedpfeyyqnlex Adrekr ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm Djdpsxz Hh Uofx Adrskr 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return Dkjdpfx Adjwwl Nlersr ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: like new (used), Year of construction: 2019, operating hours: 4,788 h, load capacity: 1,600 kg, lifting height: 5,450 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 *Mast: 3F5450 ID: 26084.5626 Category: Used Mast: 3F5450 Lowered height: 2480 mm Lifting height: 5450 mm Capacity: 1600 kg Year: 2019 Hours: 4788 hours Battery: Complete NEW * 48v / 625ah * Manufactured 05/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (approved for ZONE 1 & 2) Gas group = IIB Temperature class = T4 Type = Cat 2D (approved for ZONE 21 & 22 - Dust) Gas group = IIIB Temperature class = T 135 *Equipped with: - Joystick control for forward and reverse - Triplex FFL mast Dkodpfxozr Rkzs Adrer - Complete street lighting - Roof window - Headlights (front and rear)

Condition: good (used), working width: 180 mm, planing height: 100 mm, spindle diameter: 40 mm, type of input current: three-phase, input voltage: 400 V, Four-sided planer Griggio G18/4 Quadromat in good condition. A handy and space-saving machine that is suitable for both smaller workshops and professional use. Dkodpozq A Eusfx Adrsr Specifications: Planing width: 180 mm Spindle diameter: 40 mm Can be operated with 16 A Four-sided planing for efficient processing Perfect for planing boards, joists and strips with high precision. Included: Complete knife set Can be delivered throughout Europe at a good price

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter Dkjdpfjxpn T Uox Adrsr > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: new, grinding height: 150 mm, height adjustment type: mechanical, total height: 1,450 mm, total length: 1,800 mm, total width: 1,400 mm, overall weight: 850 kg, Equipment: CE marking, Structuring and Sanding Machine / 4-Side Brushing Machine Manufacturer: Alpha Brush Model: LS-TSB Versatile brush sanding machine equipped with a total of 6 brush units for 4-sided sanding and structuring of wood materials such as panels, solid wood flooring, scaffolding boards, facade boards, etc. Working width: 300 mm Workpiece height clearance: 150 mm Equipped with: - 1x top brush unit, 2.2 kW - 1x bottom brush unit, 2.2 kW - 1x top brush unit, 2.2 kW - 1x bottom brush unit, 2.2 kW Dkodpfxjykh Tfo Adror - 1x left-side brush unit, 1.1 kW - 1x right-side brush unit, 1.1 kW Infinitely variable speed control for each brush group (top, bottom, sides) Brush diameter: 260 - 300 mm Quick-change system for brush heads Spring-mounted pressure roller, individually height adjustable Feed rate infinitely variable, approx. 2 - 20 m/min., 0.75 kW Digital display for settings Recommended extraction capacity: 3000-3500 m³/h Voltage: 400 - 480 V, 3 Ph, 50/60 Hz Protection: 32 A Dimensions (LxWxH): approx. 1800 x 1400 x 1450 mm Weight: approx. 850 kg

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 5,865 h, load capacity: 4,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, drive type: Diesel, Four-way side loader Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Fork positioner, heating, full cabin, Dodezq Ihzopfx Adrskr

Condition: excellent (used), Catalog number 8033 TECHNICAL DATA max. width of the workpiece – upper shaft 510mm max. width of the workpiece – lower shaft 450mm max. thickness of the workpiece, processed on both sides 200mm – from above: feed roller ratchets 1 metal, toothed feed shaft 2 metal, sequential feed shafts 1 metal, toothed feed shaft pressure roller planing shaft 510mm, 4 knives, with the possibility of installing profile knives approx. 7.5kW smooth, metal feed shaft upper pressure roller at the outlet with 2 feed rollers – from below: Dedezipbtjpfx Adrskr adjustable infeed table with guide planing shaft 300mm, 3 knives 3kW slip feed shaft, metal planing shaft 450mm, 4 knives 5.5kW 2 smooth, metal feed shafts – from the back: 2 side spindles 1) vertical, right 150mm 4kW 2) vertical, left 150mm 4kW spindle diameter 40mm spindles adjustable up/down, right/left spindles lockable axes arranged alternately electric height adjustment 2 types of feed speed + stepless 5-13, 13-36m/min dust extraction nozzle diameter 2x120mm, 150mm dimensions length/width/height 3200x1500x1600mm + control panel weight 1980kg – manufactured in Portugal – electric table lifting – ideal for processing wet and dry wood – 3 planing shafts + 2 spindles – very good condition – used planer Net price: 38900 PLN Net price: 9260 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1992, functionality: fully functional, working width: 220 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 220 mm, total width: 1,350 mm, total height: 1,400 mm, total length: 3,120 mm, spindle speed (min.): 5,000 rpm, extraction nozzle diameter: 120 mm, Available: CASADEI C4 four-sided planer – 4 heads, 220 mm The machine is used, has undergone a technical inspection, is in full working order, and is ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is the vertical adjustment of the side spindles, allowing the use of profiling heads, similar to those in a spindle molder. This makes the CASADEI C4 planer suitable not only for standard four-sided planing of wood but also for the production of formwork, paneling, moldings, and other profiled elements. Specifications: • Manufacturer: CASADEI • Model: C4 • Machine type: Four-sided planer for wood • Year of manufacture: 1992 • Working width: 220 mm • Working height: 120 mm • Number of spindles: 4 • Spindle motor power: 4 × 3.0 kW — separate motor for each head • Total power: 17.5 kW • Electric height adjustment for planing • Manual width adjustment for planing • Vertical spindle adjustment (up/down) • Machine equipped with a complete set of heads and a cutterhead • Diameter of vertical heads: 120 mm • Height of vertical heads: 50 mm • Diameter of horizontal heads: 145 mm • Width of horizontal heads: 220 mm • Spindle diameter: 40 mm • Infeed gear before the first head • Infeed table with a width of 22 cm • 2 feed speeds: 6 and 12 m/min • Lubrication pump for the table • Soundproof cabin • Original paint • Dust extraction ports: Ø 120 mm • Weight: 1210 kg • Overall dimensions: 312 × 135 × 140 cm (L × W × H) Additional information: • Machine preserved in its original condition, after technical inspection and preparation for operation • Photos show the actual condition of the machine offered • Free training on machine operation at our company's premises Dksdpjzmhg Nefx Adrjr • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using MDD fleet, courier companies, or external carriers • We assist in obtaining leasing or loan financing • Delivery costs depend on the destination and the method of machine transport