4 side moulder
SCM Topset XL

Year of construction

2015

Condition

Used

Location

Oberkochen Germany

Machine data

Machine type:: 4 side moulder

Manufacturer:: SCM

Model:: Topset XL

Year of construction:: 2015

Condition:: reconditioned (used)

Price & Location

Location:: Oberkochen

Call

Details about the offer

Listing ID:: A22340647

Reference number:: 1305-2818

Update:: 16.07.2026

Description

Number of spindles 9 St.
Working width 240 mm
Working height 120 mm
Length of the planing table 2500 mm
Feed motor 7,5 kW
Working speed 6-36 m/min
weight of the machine ca. 6500 kg
Control CONTROL 100 PC PLUS
SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock
-----
Summary:
- 9 spindles (including 4 x HSK 85 S)
- Electronic horizontal and vertical positioning
- 8,300 rpm
- SCM "Set-up"
- SCM "T-Set"
- Includes workpiece infeed magazine

Working dimensions:
- Maximum working width: 240 mm
- Minimum working width: 25 mm (reducible to 15 mm via installed special kit)
- Maximum working height: 120 mm
- Minimum working height: 10 mm (reducible to 6 mm via installed special kit)
Special working cross-section equipment: Equipped with a special kit for
extremely small minimum cutting dimensions of 15 x 6 mm.

Infeed table and table surfaces:
- Infeed table length: 2,500 mm (2.5 meters)
- Surface finish: Wear-resistant, special chrome-plated finish
for optimal sliding properties and minimal wear. Spindle specifications:

1. Spindle: 1st horizontal spindle (BOTTOM):
- Motor power: 11 kW
- Speed: 6,000 rpm
- Shaft: High-precision spindle, 40 mm diameter

2. Spindle: 1st vertical spindle RIGHT:
- Motor power: 11 kW
- Speed: 8,300 rpm
- Tool mounting: Milling spindle with HSK 85S quick-change mount
- Vertical positioning: Electronic vertical positioning
- Horizontal positioning: Electronic horizontal positioning

3. Spindle: 1st vertical spindle LEFT:
- Motor power: 11 kW
- Speed: 8,300 rpm
- Tool mounting: Milling spindle with HSK 85S quick-change mount
Lhodpfx Aezl Hbion Iei
- Vertical positioning: Electronic vertical positioning
- Horizontal positioning: Electronic horizontal positioning
- Tool diameter adjustment "SET UP": Electronic regulation of
tool diameter, tool diameter positioning

4. Spindle: 2nd vertical spindle RIGHT:
- Motor power: 11 kW
- Speed: 8,300 rpm
- Tool mounting: Milling spindle with HSK 85S quick-change mount
- Vertical positioning: Electronic vertical positioning
- Horizontal positioning: Electronic horizontal positioning

5. Spindle: 2nd vertical spindle LEFT:
- Motor power: 11 kW
- Speed: 8,300 rpm
- Tool mounting: Milling spindle with HSK 85S quick-change mount
- Vertical positioning: Electronic vertical positioning
- Horizontal positioning: Electronic horizontal positioning
- Tool diameter adjustment "SET UP": Electronic regulation of
tool diameter, Tool diameter positioning

6. Spindle: 1st horizontal spindle (TOP):
- Motor power: 11 kW
- Speed: 8,300 rpm
- Shaft: High-precision spindle, 40 mm diameter (working length 250 mm)
- Tool clamping: "T-SET" quick-clamping system for tools
- Vertical positioning: Electronic vertical positioning
- Horizontal positioning: Electronic horizontal positioning
- "SET UP" tool diameter adjustment: Electronic tool diameter regulation,
tool diameter positioning

7. Spindle: 2nd horizontal spindle (BOTTOM):
- Motor power: 11 kW
- Speed: 8,300 rpm
- Shaft: High-precision spindle, 40 mm diameter (working length 250 mm)
- Tool clamping: "T-SET" quick-clamping system for tools
- Vertical positioning: Electronic vertical positioning
- Horizontal positioning: Electronic horizontal positioning

8. Spindle: 2nd horizontal spindle (TOP):
- Motor power: 11 kW
- Speed: 8,300 rpm
- Shaft: High-precision spind...

Documents

22340647-01.pdf
22340647-02.pdf

Seller

Registered since: 2002

137 listings online

Call

Send inquiry

Telephone & Fax

+49 7364 ... show

+49 7361 ... show

Fax:

These listings may also fit your interest.

Listing

Four side planer SCM TOPSET XL SCM TOPSET XL

Zębowo

6,390 km

Four side planer SCM TOPSET XL
SCMTOPSET XL

€24,500

~~€27,000~~

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, working width: 240 mm, spindle diameter: 40 mm, working height: 120 mm, overall weight: 5,050 kg, power of feed motor: 11 W, spindle speed (max.): 8,300 rpm, spindle speed (min.): 8,300 rpm, jointer table length: 2,500 mm, number of spindles: 6, Four side planer SCM TOPSET XL: - working width: 240 [mm] - working height: 120 [mm] - number of spindles: 6 - spindle diameter: 40 [mm] - feed speed: 6-60 [m/min] Lsdpfoizxf Hox An Iohi Planer in very good condtion. First owner!

See details

Listing

Bergatreute

6,799 km

Timber planer 2- sides
Ledinek

€15,000

Fixed price plus VAT

Call

Listing

Schwanberg

6,382 km

Four side planer
SCMTOPSET XL 323

Call

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Lsdeg Umrmjpfx An Ishi

See details

Listing

Four-sided wet planer SCM TOPSET XL na 6 głowic

Sierakowska Huta

6,304 km

Four-sided wet planer
SCMTOPSET XL na 6 głowic

€27,833

Fixed price plus VAT

Call

Condition: excellent (used), Catalog number 7713 TECHNICAL DATA - max width of workpiece 240mm - max height of workpiece 130mm - 6 spindles: 1) horizontal lower 240mm 7.5kW 2) vertical right 130mm 5.5kW 3) vertical left 130mm 5.5kW 4) horizontal upper 240mm 7.5kW 5) horizontal upper 240mm 5.5kW Lhedpfx Anjzab Eye Isi Spindles 4 and 5 are electrically adjustable up/down 6) horizontal lower 240mm 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm *from above: - 8 metal, toothed feed rollers, including 3 double rollers - 4 smooth, rubber feed rollers, including 2 double rollers *from below: - 3 smooth feed rollers - 3 side pressure rollers - stepless feed speed adjustment via frequency inverter - pressure rollers pneumatically actuated - feed motor 7.5kW - feed on Cardan shafts - electrical adjustment of planing thickness - body lifting motor 0.75kW - length of feed table 2480mm - pneumatic opening/closing of the enclosure - pneumatic blowing of the table - central lubrication of the table - diameters of extraction nozzles 3x120mm, 3x150mm - dimensions L/W/H 5300x1700x1800mm - weight 5000kg ADVANTAGES – Made in Italy – 6 heads – For wet and dry wood – Pneumatic opening of the enclosure – Pneumatic blowing of the table – Spindles 4 and 5 electrically adjustable – Used planer, very good condition Net price: 116900 PLN Net price: 27833 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

See details

Listing

Bovenden

6,798 km

Planer and moulder
WEINIGHydromat H25R

Call

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed Lhodpfx Anjtkt Tpj Iji 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine

See details

Listing

Juszczyn

6,089 km

Formier
WeinigUnimat 23 EL

€37,750

Fixed price plus VAT

Call

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Lsdpfx Ansrb An Uj Ijhi Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

See details

Listing

Hot Air Heatings Ewi-Therm Optimal-E 3, 87kW

Winnweiler

6,939 km

Hot Air Heatings
Ewi-ThermOptimal-E 3, 87kW

Call

Condition: new, Year of construction: 2026, Size: 3 Nominal heat output: 87 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 2,200 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Lhodpfx Aedlhbpon Iji Fuel consumption: 25 - 30 kg/h Blower air flow rate, free-blowing: 6,000 m³/h Outlet opening: Ø 500 mm Flue connection: Ø 200 mm Weight: 1,250 kg PLC control cabinet: 380 volts

See details

Listing

San Giovanni Al Natisone

6,515 km

5 SPINDLES MOULDER
WEINIGPROFIMAT 23

Call

Listing

Egenhofen

6,695 km

Thickness Planers
Socomec-ItalyPS630

Call

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Lsdpfxohpl T He An Ishi Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Indicator for planing thickness: mechanical counter Feed rate: 7-11-15-19 Infeed roller: steel, segmented Pressure bar: segmented Outfeed roller: rubber Table rollers: no Table extension: yes, infeed and outfeed Motor power: 7.5 kW Dust extraction connection: 160 mm Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg

See details

Listing

Lublin

5,918 km

Four-sided planer
REX HOMS 310-K

Call

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers Lhedpfxewfqh Ae An Iei

See details

Advertise here

4 side moulderSCM Topset XL

Machine data

Price & Location

Details about the offer

Description

Documents

Seller

Send inquiry

Telephone & Fax

4 side moulder
SCM Topset XL