Used Gys T3Gys Auto for sale (5,960)

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Iiodpfx Asuzn Nnscroc Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Year of construction: 2007, I will sell a feeder for salt, feed, etc. Iodpfx Ajv A Rqmocrsic

Condition: excellent (used), For sale: professional pallet strapping system from the renowned German company ErgoPack. Model 725E is a fully electric device that facilitates safe and fast pallet strapping without the need for bending down – ideal for warehouses, logistics, and production environments. KEY ADVANTAGES - Automatic strap guiding around the pallet - 24V electric control - AUTO, MANUAL, SOFT operation modes - Adjustable strap tension - Maximum tensioning force up to 2500N - Ergonomic handling for operator comfort - Mobile, wheeled construction - Swiss quality craftsmanship (Swiss Made components) TECHNICAL DATA Manufacturer: ErgoPack Deutschland GmbH Model: 725E Power supply: 24V DC Max strap tension: 2500N Condition: used, in good technical condition Charger included CONDITION The device is complete. Shows normal signs of use from operation. Control panel works, the machine is ready for use. APPLICATIONS - Warehouses - Logistics centers - Production Iiedpfxoyw Iags Acrjc - Pallet transport and packaging

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Iodpfxsyc H I Se Acreic Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Iiodsy Su A Repfx Acrec

Condition: like new (used), Proofing delay cabinet / proofing machine Debag Tefi 400B for up to 20 trays 600 x 400 mm, fully assembled, standard unit, top-mounted. Temperature range from -10° to +40°C, maximum air humidity up to 90% for optimal dough conditioning. Computer control. Interior and exterior walls made of stainless steel. Connection: 230V, 1.2 kW, ready to plug in. DGUV V3 certified. Dimensions: 792 x 715 x 2120 mm (W x D x H). Used equipment, year of manufacture: 2018. Invoice with VAT shown. Iiodpfjyy Iwdox Acroc

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Operation via foot switch. Ijdpfsza T Nkex Acroic In good condition.

Condition: excellent (used), -Dimensions: 610x780x1410mm -Production: 12-40L per hour Iijdpfowxu Sfex Acrjc -Serial number: 1807850/2350 -Year: 2008 -Voltage: 400V -Power: 4.6kW -Weight: 280kg This pasteurizer stirs, heats, cooks, pasteurizes, cools, matures, freezes, and preserves your recipes in a single, fully automatic cycle managed by the AUTOFRIGOR programmable controller (comparable to Carpigiani, Bravo Tritico, etc.), without any transfer or handling, ensuring maximum hygiene. All stainless steel construction Model: PG 24.60 Cooling: Condensation per cycle: 4 to 10 Production: 12 to 40 liters per hour. Electrical power in kW (400/3/50): 5.2. Dimensions in cm (W x D x H): 61 x 78 x 141. Net/Gross weight in kg: 250/280.

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Ijdpfxeww Hx Ij Acreic

Condition: used, Year of construction: 2004, The used TOP AUTOMAZIONI X-FILES automatic bar feeder is a valid alternative to the more traditional bar pusher for performing unattended bar machining on production CNC lathes. Multilayer, year of manufacture 2004, CE compliant; maximum bar diameter: 75mm Iiodex Nqi Iopfx Acrjc maximum bar length: 3300mm

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Log turner, infeed-outfeed conveyors, heavy duty construction Equipment from 2019 Iedpfx Aceu N Ac Sjroic

Condition: new, functionality: fully functional, Deutschmann Automation Unigate CL-PBDPV1 CL profibus. Complete PROFIBUS-DP-Slave interface Iodpfx Aov N Ru Escreic Automatical Baud rate recognition (9600 bit/s - 12 Mbit/s) DPV0 and DPV1 supported Isolated PROFIBUS interface with 9-pin. D-sub connector PROFIBUS address adjustable via rotary switch Up to 244 Bytes input- and 244 Bytes ouput data (total data length 488 Bytes) Good working condition. Please check out our other listings as well.

Year of construction: 2020, condition: excellent (used), For sale: Noxon Ekko 12.1 pallet wrapper from 2013 This Noxon Ekko 12.1 is a reliable and user-friendly pallet wrapper that can be immediately deployed in any logistics or production environment. The machine is in good condition, fully functional, and equipped with a large 1650 mm rotating platform, including a ramp. Thanks to the powered pre-stretch system, the film is applied efficiently and tightly, resulting in lower film consumption and a consistent wrapping result. Key features: Ijdpfezbybpex Acrsic - 1650 mm rotating platform with ramp - Powered pre-stretch system for optimal film saving - Automatic height sensor - Adjustable wrapping programs for various applications - Simple operation via a clear panel - Robust and stable construction Technical specifications: - Model: Noxon Ekko 12.1 - Year of manufacture: 2013 - Power supply: 230V - Rotating platform: 1650 mm - Maximum pallet weight: 2000 kg - Maximum wrapping height: approximately 2400 mm - Film carriage: powered pre-stretch Condition of the machine: The machine is in good condition and functions perfectly. Ideal for companies looking for a reliable wrapper. A video of the machine can be sent via WhatsApp. We also supply wrapping film. For more information, please feel free to contact us. Trade-in of a (defective) pallet wrapper is possible. See also my other listings. Film wrapper, pallet wrapper, wrap machine, wrapping machine, pallet wrapping machine, wrapper, robot wrapper, wrapping robot, robot, wrapper, film, wrapper

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Iodpfx Aey E Exiocrjic Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: excellent (used), Steady rest rollers Make SMW Autoblock 016953 Iijdpfx Aehglphjcrec (28207) Type ID No. 016953 3 pieces Diameter outside 52 mm Diameter inside 25 mm Width 25 mm

Condition: new, functionality: fully functional, machine/vehicle number: 005119, Year of construction: 2016, Equipment: documentation/manual, Slewing arm – spare part – König Loader KA SL260 Iiedpex Tqhljfx Acrsc Complete new 25x25 KA-SL V4 thread drive with mounting parts for a loader for the lifting movement of the slewing arm – automation of the production machine (Reishauer) Koenig Automation AG – Switzerland, Item 005119 new and unused – procured as a spare part Price / details on request. All technical information is subject to typing errors/mistakes. We sell exclusively to countries of the European Community.

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Ijdpfx Ajfy T Arjcrjic Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Iiodpefz Ndyofx Acroc - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog Iiodpfx Ajfy T Szecrsc

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. Isdpfx Aofz I D Docreic The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Ijdpoflmdwefx Acroic All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Iiodpeflrc Sjfx Acroc - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Condition: used, Year of construction: 2011, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm Iodey Sbkhepfx Acrsic table height 750 mm 550 mm 335 mm 550 x 335 mm 330 mm cutting speed 320 x 335 mm down speed 200 mm dimensions of saw-band 200 x 335 mm workpiece weight 15 - 150 m/min 3,0 kW work height max. 1500 kg connected load 2400 x 2200 x 1900 mm Equipment: - Automatic feed unit - Material end Light barrier - Clamping pressure regulation for automatic machines - Manual saw blade tension - Laser light for cutting line display/scoring saws - Water spray gun

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. Iedpfswkdt Nex Acrjic The system was in use for only a few years before the entire log infeed was removed. We also have additional components from the same log infeed available.

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 10387A, input voltage: 400 V, type of input current: AC, Recently acquired through site purchase. Automatic robotic fruit packaging machine Utilizes three Staubli TS60 robotic arms See images for details Buyer to arrange for collection Ijdpfxsxcndgs Acrsic Machine is not currently connected to services