Used Hensel Ebu 50 for sale (33,170)

Condition: excellent (used), Year of construction: 1978, grinding length 500 mm grinding width 200 mm Bdodpfxjzbczrs Aprec

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Bdedsxlkq Uepfx Aprjc Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: used, machine/vehicle number: 516329J00165, Year of construction: 2018, Output: 15.0 kW, lifting capacity: 5,000 kg, unladen weight: 5,398 kg, duplex mast, side shift, partial cabin, STILL afx 30V/140A battery charger, recorded operating hours: 3,461 hours. Bdjdpfsy U R Rvox Aprec

Condition: excellent (used), Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Siemens 840 D Bjdpszawmajfx Aprjdc tool adaptor SK 40 spindle turning speed - stepless 2 U/min feed speeds mm/min tool change unit 16 surface area 700 x 500 mm workpiece weight max. 500 kg weight of the machine ca. 4,4 t Overall size 2,8 x 2,6 x 2,5 mm Full coverhing/ housing cooling device only about 1.500 h

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm Bedpjyb R Nwefx Apredc -Weight: 1200 kg

Condition: excellent (used), 1 used, very well-maintained universal milling head system "HURON" with hydraulic tool clamping, internal coolant supply (IKZ), and electric tool release signal Manufacturer: SEMPUCO, Origin Germany Model: KFU 2/45-SK 50 Technical data: Spindle mounting: SK 50 Max. speed range: 3500 rpm 4000 rpm, 30% duty cycle Max. drive power: 15 kW Weight: approx. 180 kg Accessories / Special features: • 2 manual swivel axes, system "HURON" • Hydraulic tool clamping • Electric tool release signal • IKZ - Coolant supply through the spindle • For retrofitting to conventional, NC, or CNC milling machines, horizontal milling machines, or drilling machines (e.g.: AUERBACH, UNION, MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, ARSENAL, ...) Bdedjzavrbopfx Aprsc Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, Blade 40 x 175 mm Bdsdslfdvyjpfx Aprjc Chain width 15 mm swivellable für Keillöcher °

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine xH: 11,5 x 6,6 x 8,4 m NEW CNC vertical turret lathe - manufactured upon official order and deposit. The photos shown are of a newly built machine that we delivered to a customer. (The photos are for illustrative purposes only.) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. Bdedsu Ix H Djpfx Aprsc The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min Bdedpfju Idffex Aprec table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: used, Technical details: machine weight approx.: auf Anfrage kg Bdsdpfx Apou N Avljroc voltage: 50 Hz current- max.: 230 A dimension machine xH: auf Anfrage m Measured value capture processing Recording of machine quality measurements ‘Mode of operation: Measuring the relative movement between tool and workpiece.’ (Excerpt from operating instructions) Measuring computer Device options: -sequential measurement -Test plan management -16 features -sequence triggering -Diskette drive Control unit manufacturer Nieberding, serial no. 8-19863 with connection for air conditioning and shut-off valve Equipment: 2x precision measuring display and maintenance box Accessories Test mandrel Ø 48mm and test device *

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: Bedpeu Nfttefx Aprsdc 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: used, Year of construction: 2011, Technical details: Rated capacity: 63 kVA Revolution per minute: 1500 U / min capacity: 50 (Wärmetauscher) KW type of fuel: (Erd) Gas Number of working hours: 87021 h weight: ca. 2300 kg dimensions L x W x H: ca. 3,0 x 1,0 x 1,8 m CHP compact module (heat exchanger module) soundproofed with electric cabinet Engine: MAN; type E0834 E302; Gas-Otto 4-stroke engine, 1500 rpm; power mech. 54kW, ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; type LSA 43.2 8; type output 87 kVA; 1500 rpm; voltage 400V Heat exchanger module: Heattransfer, engine cooling water output 46kW; exhaust gas heat output 33kW; total heat output via plate heat exchanger = 79kW Bsdpfx Apeu Nvp Soredc Connections for gas inlet, flue gas outlet, condensate drain and heating water on the side. with exhaust gas top *

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm back gauge - adjustable: ca./approx. 800 mm Bdsdpju Ib D Eefx Aprsc control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 Bdodpfx Apsu Id Dborec - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 Bodpfxju Ix Dco Apredc tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m Bdodpfxevvrpks Aproc 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: used, Year of construction: 1984, Technical details: grinding length: 500 mm grinding width: 250 mm workpiece height: 250 mm table surface area: 530 x 200 mm magnetic plate size: L:460 x B:150 x H:87 mm table speed: 2 - 32 m/min table adjustment: Längsweg: 550 mm table adjustment: Querweg: 300 mm feed of spindle: 0,001 mm/Hub grinding spindle speed: 3.000 U/min dimensions of grinding wheel: max. Ø 250 x B:25; Bohung Ø 76 mm total power requirement: 4,3 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,3 x 1,8 x 2,2 m dimensions of hydaulic: L: 500 x B: 480 x H: 680 mm dimension coolant device LxWxH: 0,65 x 0,45 x 0,8 m The machine is currently equipped with a grinding wheel Ø 240 x 22mm. On the table there is a permanent magnet plate with 30 induction fields, operated by a hand lever. Operation via swiveling control panel. no dressing device Bjdpfx Apou Ngkyorjdc incl. oil collecting tank; grinding wheel holder and available documentation *

Year of construction: 1963, condition: used, Technical details: max. ram stroke: 150 mm workpiece diameter - max.: 250 mm slot width: 50 mm feed speed: 10 m/min. adjustment of stroke: ja mm voltage: 380 V work table:: Ø 250 mm total power requirement: 6,0 kW weight of the machine ca.: 1,05 t dimension machine xH: 1,2 x 0,8 x 1,6 m Application: For the internal grooving of flanges Drawing needle specifications: -total length = 650mm -Width = 10; 20; 30; 50mm -Drawing length = approx. 150mm Lubrication takes place via the drawing needles. Equipment: 4 different drawing needle guides (5; 22; 32 and 50mm) 50 different flange holders 23x drawing steel holders shank 18mm; 12x shank 22mm; 7x shank 26, 30, 40 and 45mm incl. accessories see photo i.D. Bodpfx Apsu Ng T Usrodc *

Condition: good (used), Year of construction: 2002, 5-axis CNC machining centre Manufacturer: AXA Machine model: VPC 50 U Control system: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Portal construction TECHNICAL DATA Travels - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle – swivelling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Bdedpjyz R Hdofx Aprec Tool magazine - Tool holder: SK50 Machine table - Table size fixed table L x W: (mm) 1,100 x 1,100 - Table diameter built-in rotary table: (mm) 1,100 x 1,100 Modifications and errors in the technical data and information excepted.

Condition: good (used), Year of construction: 2004, operating hours: 6,293 h, functionality: fully functional, For sale is a machining centre from the manufacturer Deckel Maho, model DMU 50. The machine is in good condition and can be inspected on site. Bdodoyghqvspfx Aprjc

Condition: ready for operation (used), 9 kW, 150 degrees Celsius Two units in stock Bsdozab A Eopfx Aprodc Warranty: 6 months

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm Bdedpfx Aopxmlioprjc column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Year of construction: 2021, condition: as good as new (ex-display), Due to order cancellation 2 x new Tersa planing heads D140x130x50 All original Swiss Made. It doesn't get any cheaper! One-time super cheap set offer Bsdpfszau Etox Aprodc

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, For sale: Minipack-Torre Modular 50 Digit shrink wrapping machine, made in Italy. A robust and reliable L-sealer, ideal for packaging a wide range of products using shrink film. Currently, we have 4 identical units available in stock – all are in full working order. The price listed is per machine. Location: Ivanka pri Nitre, Slovakia – ready for inspection or immediate collection. Technical Specifications: Manufacturer: Minipack-Torre S.p.A., Italy Model: Modular 50 Digit Year of manufacture: 2001 Voltage: 380–415 V Frequency: 50–60 Hz Power consumption: 2.3 kW Current: 6.0 A CE certified Serial number: 001088 Condition: - Fully operational and tested - Good technical and visual condition - Suitable for continuous industrial use - Machines regularly serviced and stored indoors Price: €3,500 per unit (Ex-works Ivanka pri Nitre, Slovakia) All four machines are available and ready for immediate sale. Ideal for: - Industrial and commercial packaging - Shrink film applications (PVC, POF, Polyolefin) Bodsxu Dulspfx Aprsdc - Food, cosmetics, and general product wrapping

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, hydraulic flat cylinders -Manufacturer: Lukas, single-acting light alloy cylinder with spring return, 50 mm stroke -Type designation: HP 20/50 -Stamp diameter: 65 mm -Lifting capacity: 20 t -Number: 2 cylinders available Price: per piece -Dimensions: 140/100/H205 mm -Weight: 6.1 kg/pc. Bdjdowtm H Depfx Aproc