Used Heuft 10.12,5.08 Und 10.12,5.10 for sale (5,421)

Condition: new, maximum load weight: 1,820 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, total length: 4,500 mm, total width: 1,930 mm, total height: 1,260 mm, Year of construction: 2026, Dear Customers, Our company will be closed until and including August 12, 2026. In urgent cases, you can reach us via WhatsApp at: Thank you for your understanding! Humbaur three-way tipper with electric pump and steel grating extension – HTK 2700.31 Our price: €7,350 including 19% VAT, 6.4% delivery costs, and registration documents. Individual configurations as well as numerous accessories and equipment options such as grating or steel sheet extensions, tarpaulins, supports, ramps, etc. are available on request. Also available with a total weight of 3000 kg and 3500 kg. Description: The HTK three-way tipper impresses not only with our usual high quality standards. It is equipped with a practical hand pump, which you can also replace with an electric hydraulic pump if required. An electric pump is installed in the trailer. This makes tipping your load no longer a challenge, but a breeze! Technical data: * Trailer type - Twin axle * Construction type - Aluminum * Rear tipper - 45° * Three-way tipper - 45° * Weight - 880 kg * Total weight - 2700 kg * Payload - 1820 kg * Internal length - 3,140 mm * Overall length - 4,500 mm * Internal width - 1,750 mm * Overall width - 1,930 mm * Internal height - 350 mm + steel grating extension 60 cm * Overall height - 1,260 mm + steel grating extension 60 cm * Loading height - 745 mm * Tires - 13 inches Standard equipment: V-shaped drawbar, hot-dip galvanized * Chassis and tipping platform, hot-dip galvanized * Tipping platform made of steel, manufactured in one piece * Humbaur multi-function lighting * Side panels made of anodized aluminum, completely removable * Rear flap, hinged Fgjdpfx Aezqxxwedrsf * Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring * Support wheel * Planking shaft as preparation for aluminum planks for easy retrofitting

Condition: used, Druck- und Vakuumkompressor / Pressure and Vacuum Compressor Becker DVT 3.60 trockenlaufend / oil-free Fodpfxevk R I Ue Adrsgf Baujahr / Year 2015 - SN. D 2953819 60 m3/h Volumenstrom 50 Hz / Volume flow 50 Hz -  58 m³/h Druck/Vakuum relativ 50 Hz    / Pressure/Vacuum relative 50 Hz - ±0,6 bar Leistung 50 Hz / Power 50 Hz - 3,0 kW Schallpegel 50 Hz / Noise Level 50 Hz - 74…75 dB(A) Volumenstrom 60 Hz / Volume flow 60 Hz - 69 m³/h Druck/Vakuum relativ 60 Hz    / Pressure/Vacuum relative 60 Hz - ±0,6 bar Leistung 60 Hz / Power 60 Hz - 3,6 kW Schallpegel 60 Hz / Noise Level 60 Hz - 75…76 dB(A) Gewicht / Weight - 47 kg ohne Motor (without Motor) Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Karten- und Warenprobenkleber - Card and Product Sample Adhesive Kolbus KI 224 ZU Baujahr / Year 2003 - Serial-No. 356009 For cards, envelopes, bags and booklets of the following formats: Fgodpewqftkefx Adrjf Für Karten, Umschläge, Taschen und Hefte in folgenden Formaten: Format / Size min. 40 x 60mm - max. 220 x 350mm Geschwindigkeit / put 18.000 Ex/h (depending on type, size and  properties of base and product up to) Heißleim Schmelzgerät / Hot Glue (commercial products) Nordon 3100V-3EA Aufbau, zum Anbau an der Zusammentragmaschine, Design / compat appliance for attachment to a collating machine Antrieb über Zahnriemen von der Hauptwelle zur ZU 840 / Drive toothed belt from main shaft to ZU 840 Steuerung: Elektronische, interaktive Mikroprozessor-basierte Steuerung mit Einstellung von Vorlaufzeit und Leimstreifenlänge /  Control: micro-processor based control unit with adjustment of lead-time and length of the glue  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung Fodpoxvh E Rjfx Adrjgf in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Drehschieber-Druck-/Vakuumpumpen, trockenlaufend / Rotary vane pressure/vacuum pumps, oil-free Druck- & Vakuumpumpe / Pressure & Cacuum Pump Becker DVT 3.100 Baujahr / Year 2013 - Serial-No. D 2760035 Volumenstrom 50 Hz / Volume flow 50 Hz 103 m³/h Leistung 50 Hz  /Power 50 Hz 5,5 kW Schallpegel 50 Hz / Noise Level 50 Hz    76…77 dB(A) Gewicht / Weight +/- 95kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Fgodpfx Adeyx H I Eeref

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 519 Lord Comfort – 517 version with glass roof available upon request Vehicles are equipped with the new GSR2 and GSR3 systems (mandatory): For example: - Driver comfort package - Reversing camera - Blind spot assist - Turn assist - MBUX 10" (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assistant - Start information assistant Fgodpfx Ajzqy Dnjdrof - Intelligent speed assistant - Distance assistant - Rain sensor - Electrically adjustable exterior mirrors - Adaptive cruise control Equipment package Original Mercedes: - Front air conditioning - Auxiliary heater - Air-suspended driver’s seat with heating - PDC front and rear, front camera / reversing camera - Fog lights - 9-speed automatic transmission 519 additionally includes LED headlights. - Rear extension 500 mm, total length 7,836 mm - Thermal and acoustic insulation - Extra large panoramic windows inside and out, double-glazed - Panoramic driver’s window with electric sunblind - Glass roof - 19 sleeper seats + guide seat - Total capacity 20 incl. driver - Webasto / Diavia 12 kW rooftop passenger air conditioner - Multi-stage night lighting: white/orange/blue - Convector heating left and right in passenger compartment, thermostat controlled - Electric exterior swing door - Sleeper seats with 3-point seat belts, magazine net - Double glazing, black tinted - Side walls and ceiling trimmed with fabric and faux leather (no simple ABS or bare metal interior) - All attachments painted in vehicle color - Passenger compartment clock - USB ports at every seating row - Overhead channels left and right with luggage racks and service sets incl. reading lamps, speakers - Half podium - Lowered, sliding rear luggage compartment for last row - Refrigerator - Optional: hubcaps Gerflor wood-look flooring Net export possible. We make shipment worldwide. Price 517 silver: €112,990.00 Price 519 white: €114,990.00

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. Fgsdpszhbf Isfx Adref This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: like new (used), 2,500 m² Schaefer R3000 storage racking system, 2-3 tiers Used, top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and installation 2-3 tiers Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and promptly available Transport and installation possible on request. Inspection possible at any time by appointment. Further information on request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly turnover of 30–50 semi-trailer loads for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving units, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and installation. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner Fodpfxjfiqhle Adrjgf 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including thorough cleaning and removal. 2. Commission auction: Carrying out auctions on behalf of clients. Our full service is provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough cleaning and handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), 2,000 m² Schäfer R3000 two-story warehouse shelving Used, in top condition, like new, see pictures. Manufacturer: SCHÄFER R3000 CAD planning and installation Fsdpfsfiqhmox Adrogf Price upon request! Partial sale possible Negotiable price: upon request! Goods are in stock and available immediately. Transport and installation possible upon request. Inspection possible at any time by appointment. Further information upon request. We continuously have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty shelving, used & new Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving available for immediate delivery • 20,000 m² of warehouse platforms & steel construction platforms immediately available • 30–50 semi-trailer truckloads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with adjustable shelves, tire racking or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round carefree package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you found us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving systems, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), 2,700 m² Schäfer R3000 two-story warehouse shelving system Used, in top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and assembly Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and immediately available Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, specifications, and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Fjdpfxjfiqhfe Adrsgf Lenox Trading – Top warehouse technology & heavy-duty shelving used & new Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of warehouse platforms & steel structures immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racking, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete warehouse stocks including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service through our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and complete handover. Whether you came across us through heavy-duty shelving or are looking for heavy-duty shelving galvanized / heavy-duty shelving system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), 4,000 m² Schäfer R3000 two-story storage platform Used, in top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and assembly Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and readily available Fodsfiqhdspfx Adrjgf Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex warehouse) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer truckloads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATIONS: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling, and handover in a clean condition. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Tracked excavator CAT 352-07 Fgedpfsyy Hvxjx Adrjf The machine has only 5,300 operating hours and is in good condition Operating weight approx. 52,800 kg

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Fsdpfowmh Hrjx Adrsgf Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 07/2023, next inspection (TÜV): 01/2027, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, mileage: 86,347 km, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available for rent from 4 weeks onwards – immediate availability – contact O. Schinke. Rent – please contact Mr. Schinke. Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, access ramp 1,300 mm, Rear loading ramps 2950 x 1,700 x 900 mm, access angle approx. 11 degrees, hydraulic ramp lift, ramp hydraulically adjustable, Lubrication aid, Smart Board, loading platform extension, Spare wheel holder, including spare wheel, storage box, 1 front support: telescopic support, aluminum alloy, for coupling, 2 foldable rear support legs with spring holder, to operate the hydraulic components, a suitable truck hydraulic system with forward and return lines is required (not included in the scope of supply). Also available for long-term rental! Contact us – we will provide you with our individual offer. * ABS * Axle steering on the 2nd and 3rd axles * Lateral impact protection * Rubber-metal pads on the loading ramps * Plastic toolbox * Single lift axle * Platform side panels * Hydraulic ramp lift * Ramp hydraulically adjustable * Spare wheel holder * Rotating beacon * SAF axles * Smart Board * Supports * Warning package * Central lubrication system We explicitly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee; subject to changes, prior sale, or errors. We strongly recommend and offer an inspection and examination so that no false impressions arise about the condition and suitability with the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. We will take care of all formalities and hand over the vehicle with the desired transport license plates for an extra charge. The images have been partially edited and are only for initial viewing; if you are interested, please contact us and request current images. Fsdpjzhknrjfx Adrjgf

Condition: used, Year of construction: 2006, Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data - Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) - Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) - Year of manufacture: 2006 - Machine type: crate palletizing and depalletizing line - Capacity: 33,000 bph (160 bottles per layer) - Pallet format: Euro - Crate formats: 5x4 - 400x300x300 mm / 6x4 - 400x300x270 mm / 5x4 - 400x300x210 mm / 4x3 - 355x275x345 mm / 4x3 - 400x300x330 mm / 5x4 - 355x275x255 mm / 5x4 - 400x300x290 mm - Controls: Siemens SIMATIC S7 PLC, B&R Power Panel HMI with ACOPOS servo drives, Danfoss VLT 5000 frequency drives, SEW MOVIDRIVE Equipment - Palletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Depalletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Logipack vertical pallet strapper - Pallet and crate roller/slat conveyors - Layer-forming / grouping table - Unloading table - Pallet magazine Fgodpfjzk I N Sjx Adref - Separate BMS-branded control cabinet - Safety fencing with light-curtain guarding Condition Used - complete, still installed; no longer in production (line stopped). Availability Available immediately. Location: Germany. Can be visited on request. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: new, maximum load weight: 1,078 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 300 mm, total length: 3,765 mm, total width: 1,310 mm, total height: 830 mm, Year of construction: 2026, Dear customers, our company will be closed until and including August 12, 2026. In urgent cases, you can reach us via WhatsApp at: Thank you for your understanding! Humbaur Startrailer with cover and bows LH1500 Price - 2450 € including 19% VAT, cover and bows, including 6.4% delivery fee and vehicle documents Technical data: * Trailer type - Single-axle * Construction type - Aluminum * Weight - 231 kg * Total weight - 1,300 kg * Payload - 1,078 kg * Internal length - 2,510 mm * Overall length - 3,765 mm * Internal width - 1,310 mm * Overall width - 1,800 mm * Internal height - 300 mm including cover 1600 mm * Overall height - 830 mm including cover 2150 mm * Loading height - 530 mm * Tires - 14 inches Standard equipment: 13-pin plug * Side walls made of anodized, double-walled aluminum profile * Fixed front wall and flap with sturdy closures * Lashing eyes integrated into the side walls, tensile force 400 kg per lashing eye, Dekra tested * Multifunction lighting integrated into the underride protection Fgedezphqmepfx Adrof * Corner posts with insertion options * Pre-assembled fastening buttons for cover attachment on the side walls Description: Do you need to transport garden waste, small pieces of bulky waste, or larger purchases? Then the low-loader Startrailer will be perfect for you. It is particularly lightweight, versatile, and looks great. Note, for example, the stylish and understated closures of the rear flap.

Condition: new, maximum load weight: 1,975 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,850 mm, loading space height: 2,150 mm, total length: 4,488 mm, total width: 1,913 mm, total height: 2,150 mm, Year of construction: 2026, Dear customers, our business will be closed until and including August 12, 2026. In urgent cases, you can reach us via WhatsApp at: Thank you for your understanding! Humbaur HT 25 31 18 with tarpaulin and bows LH1500 and steel grid extension 620 mm Price - €6150 including 19% VAT, tarpaulin and bows, steel grid extension, including 6.4% delivery surcharge and vehicle documents. Description: Everything a professional needs: A sturdy flatbed trailer with a fully hot-dip galvanized frame and chassis. All important components, such as the longitudinal beams or the underrun protection, are also protected against corrosion, and the drawbar can be easily replaced if it is damaged during hard work. Recessed lashing rings secure the load. Each one can withstand a tensile force of up to 400 kg, as certified by Dekra. The robust side walls are made of anodized aluminum with recessed fasteners and, like the hot-dip galvanized corner posts, can be completely removed. Technical data: * Extended drawbar * Trailer type - Two-axle * Construction type - Aluminum * Weight - 525 kg * Gross vehicle weight - 2500 kg * Payload - 1975 kg * Internal length - 3100 mm * Overall length - 4488 mm Fgodpjzphqtofx Adrjf * Internal width - 1850 mm * Overall width - 1913 mm * Internal height - 350 mm including tarpaulin 1850 mm, or with steel grid extension 970 mm * Overall height - 1110 mm including tarpaulin 2610 mm * Loading height - 735 mm * Tires - 15 inch Standard equipment: V-shaped drawbar, hot-dip galvanized * 13-pin plug and reversing light * Floor panel, 18 mm thick * Side walls made of anodized aluminum with recessed fasteners, completely removable * Lashing rings integrated into the V-shaped outer frame profile, tensile force 400 kg per lashing ring, Dekra certified * Support wheel

Condition: new, maximum load weight: 1,210 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,400 mm, loading space height: 1,600 mm, total length: 3,580 mm, total width: 1,535 mm, total height: 2,255 mm, Year of construction: 2026, Dear customers, Our business will be closed until and including August 12, 2026. In urgent cases, you can reach us via WhatsApp at: Thank you for your understanding! Humbaur HU 152314 with cover and bow LH1300 Price - €3350 including 19% VAT, cover and bow, including a 6.4% delivery fee, and vehicle documents Description: A solution for almost everything. With the wide range of accessories, you can equip the HU flatbed trailer for many different applications. It transports your motorcycles, bicycles, garden tools and more. To prevent the load from slipping, secure it with the lashing eyes recessed in the aluminum side walls. Technical data: * Trailer type - single-axle * Construction type - aluminum * Weight - 290 kg * Total weight - 1,500 kg * Payload - 1,210 kg * Internal length - 2,300 mm * Overall length - 3,580 mm * Internal width - 1,400 mm * Overall width - 1,535 mm * Internal height - 300 mm, including cover 1600 mm * Overall height - 955 mm, including cover 2255 mm * Loading height - 655 mm * Tires - 13 inches Fgsdszphqyspfx Adrof Standard equipment: V-drawbar combined with a longitudinal beam, hot-dip galvanized * Chassis and frame, hot-dip galvanized * 13-pin connector, reversing light from 751 kg. permissible total weight * Floor panel, 15 mm thick * Side panels made of anodized, double-walled aluminum profile with latch closures, completely removable * 4 lashing eyes in the outer frame profile * Support wheel * Humbaur multi-function lighting integrated in the underrun protection * Corner posts with the possibility of inserting additional supports

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° Fsdpoyxxzwsfx Adrsgf - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg Fgsdek H Ic Uepfx Adrsf - immediately available - Image: similar. Machine is still in original packaging.

Condition: used, Tenoning spindle 1 0 Number of milling agregates 2 St. Spindle diameter 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer ----- Manufacturer's Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine ----- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system; Positive-guided saw guard for accident prevention Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for 3 tool positions (stroke height: 83 mm); Motor: 7.5 kW Sliding table: Adjustable on both sides from 0 to 60 degrees Automatic feed system with various infinitely variable speed settings; dual pneumatic clamping system; Length stop (LAS) with 3-position system, 2300 mm capacity Automatic transfer unit to the profiling section Profiling spindle: 40 mm diameter x 252 mm length Pneumatic stroke: 112 mm (adjustable) for 2 tool positions Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge; Adjustable front milling fence jaw Glazing bead saw with 3 kW motor and 4-position turret head adjustment; Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable, Roller groups pivotable inward and outward Counter-stop with 5-position turret head Frame milling unit ----- Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG ----- Power Specifications: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar Conditioned air: According to Pneurop 6611 1. Profiling Spindle 1: Fgodpfey T R Tbsx Adrof - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Climb and conventional milling - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical (U-axis) movement of the profiling spindle - Vertical positioning: Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Actuation: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Automatic plunge mechanism: Plunge speed adjustable to ensure tear-out-free rebating - Safety and dust extraction hood with 140 mm diameter connection port 2. Profiling Spindle 2: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-axis movement of the profiling spindle - Vertical positioning: Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Drive: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Safety and dust extraction hood with connection port (140 mm diameter) 3. Hardware Routing Unit EG: - Spindle arrangement: Right - Drive: 3 kW three-phase motor - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: None - Horizontal p...

Condition: used, empty load weight: 4,160 kg, maximum load weight: 34,840 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2008, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Location: Bovenden, 3 axles, BPW axles, air suspension, ABS (anti-lock braking system), underrun protection, front support legs, side aluminium side protection, landing gears. Superstructure: 3-axle container chassis for ISO and tank containers 20ft/30ft with ADR, 3x 9t BPW axles, drum brakes! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Fsdpfx Adewt Dr Rersgf

Condition: used, functionality: fully functional, 2 x high-quality HANSEN patented industrial gearboxes Type: D631 CT • Input speed: 1,435 rpm • Output speed: 55.8 rpm • Gear ratio: approx. 25.7:1 • Safety factor: 1.6 Fgsdszib A Ajpfx Adrjf Type: 631 • Power: 33 HP (approx. 24 kW) • Input speed: 1,455 rpm • Output speed: 44 rpm • Gear ratio: approx. 33:1

Condition: used, mileage: 3,02,000 km, power: 110 kW (149.56 HP), first registration: 06/2020, fuel type: diesel, gearing type: automatic, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Viewing by appointment by telephone. Fsdpfx Aezdxmnedrjgf

Condition: used, maximum load weight: 33,780 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2019, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schwarzmüller timber semi-trailer with bolster and stakes * BPW axles with air suspension and disc brakes Fgjdpfxezpcp Re Adrjf * 1st axle liftable * Spare wheel holder * Tyres 385/65R22.5 * Aluminium rims * Work lights * 2x storage compartments * Jost landing gear For further information, please feel free to contact us.