Used Horizon Stacking Lower Table for sale (24,813)

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 Gjdpfsy Uzldsx Akaoug with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp!

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns Godpszzz Najfx Akasug - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW Guedpjzzkt Uefx Akasg EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip Gedpfx Aozzrutekaeug • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 99.125.681, working width: 1,100 mm, overall weight: 2,500 kg, grinding belt length: 1,890 mm, grinding belt width: 1,110 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 2 Unit 1 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Unit 2 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Max. working width: 1,100 mm Min. working height: 30 mm Max. working height: 183 mm Infeed table length: 400 mm Outfeed table length: 250 mm MACHINE DETAILS Feed motor power: 0.75 kW Voltage: 380 V Current consumption: 36 A Fusing: 63 A Gedpfezxcmzjx Akajug Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,800 x 2,320 mm Unladen weight: 2,500 kg Number of transport packages: 1 EQUIPMENT CE marking

Year of construction: 2010, condition: used, functionality: fully functional, COMANDULLI OMEGA 60 SX edge grinding machine for rounding edges, manufactured in 2010. Belt running direction: left to right. Pre-grinding support. 1+1 automatic pre-grinding supports at 45°. 6 grinding supports for straight and round edges. Gjdpfx Ajzz Nymskaoug 1 upper and 1 lower chamfering supports. Water drip unit. 2 roller tables, each 2 m in length.

Condition: ready for operation (used), Year of construction: 2016, The specifications for the 2016 Horizon BQ-470 perfect binder are as follows: Attribute Specification Source Binding Method Binding with milling, binding without milling, and padding SI Modul for measuring the thickness of the book - this information automatically is transferred to the machine Number of Clamps 4 Maximum Book Size 320 x 320 mm (12.59" x 12.59") Minimum Book Size 145 x 105 mm (5.71" x 4.14") Book Thickness 1 to 65 mm (0.04" to 2.56") Maximum Cover Size 320 x 660 mm (12.59" x 25.98") Guedpfx Akjyku Rqoasg Minimum Cover Size 135 x 225 mm (5.32" x 8.86") Cover Weight (Normal) 81.4 to 302.4 gsm Cover Weight (Coated) 104.7 to 348.9 gsm Cover Pile Height Max. 150 mm (5.9") Cycle Speed (EVA) Max. 1,350 cycles per hour Milling Depth Up to 4 mm Dimensions (L x W x H) Approx. 3,630 x 1,050-2,240 x 1,800-2,000 mm Approximate Weight 2,100 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 2,500 mm, wire diameter (max.): 7 mm, mesh size: 6,000 mm, AUTOMATIC BUNDLING AND STACKING SYSTEM FOR WELDED WIRE MESH Industrial unit consisting of a Schlatter/Jäger SAB-2 bundling machine + a Schlatter SPH stacking machine, designed to automate the output of a welded wire mesh production line. The system performs the final operations of the line: receiving and transporting the mesh via roller tables, forming and bundling packages, stacking, and preparing them for subsequent removal, storage, or shipment. The unit does not need to operate in conjunction with a Schlatter welding machine. It can be integrated and connected to welded wire mesh production lines from any manufacturer, with the corresponding mechanical, electrical, and control adaptations required for the installation. This allows the unit to be used as: Automation of a currently manual line output. Replacement of an old bundling/stacking system. Expansion of an existing line. Independent end-of-line system for Schlatter machines or machines from other manufacturers. Main technical data SCHLATTER / JÄGER SAB-2 BUNDLING MACHINE Year: 2005 Model: SAB-2 Maximum mesh width: 2,500 mm Wire diameter: 5–7 mm Wire strength: max. 450–600 N/mm² Longitudinal/transverse spacing: ≥ 80 mm Maximum stacking/package height: 800 mm Roller track height: 250 mm Approximate power: 4 kW Power supply: 400 V / 50 Hz Compressed air: 6 bar Control: Siemens S7 PLC SCHLATTER SPH STACKING MACHINE Year: 2005 Model: SPH Maximum mesh width: 2,500 mm Mesh length: 4,000–6,000 mm Stacking system with 4 lifting stations Approximate lifting height: 700 mm Maximum capacity: 12 tons Stacking accuracy: ±10 mm Approximate power: 4 kW Guodpfx Ajzych Iokaog Control: Siemens S7 PLC Roller tables included

Condition: new, Year of construction: 2026, TA1000/2010 Stationary Scissor Lift Table – 1000 kg Capacity The TA1000/2010 Stationary Scissor Lift Table is a durable hydraulic lifting platform designed for handling heavy and oversized loads. Combining a 1000 kg load capacity, a large 2000 × 1000 mm platform, and a stable scissor lift mechanism, this model is ideal for warehouses, manufacturing facilities, technical workshops, assembly stations, and order fulfillment areas. Key Advantages of the TA1000/2010 Scissor Lift Table 1000 kg load capacity – suitable for heavy loads, pallets, crates, structures, industrial components, and production materials. Large 2000 × 1000 mm platform – provides ample space for handling oversized items and loads with non-standard dimensions. Lifting range: 300–1060 mm – allows adjustment of the working height to suit operators, machinery, or production lines. 400 V power supply – designed for industrial, manufacturing, and workshop environments. Remote control operation – convenient lifting and lowering of the platform at the push of a button. Scissor lift mechanism – ensures stable and even platform movement under load. Safety limit switches – automatically stop the platform when the maximum lifting height is reached. Safety toe guard beneath the platform – protects the lowering area and enhances workplace safety. Net weight of 250 kg – provides increased stability when handling large and heavy loads. Stationary construction – ideal for fixed workstations, assembly areas, and production processes. Applications The 1000 kg stationary scissor lift table with an extra-large platform is designed for applications where a standard lifting platform is not sufficient. The TA1000/2010 enables safe lifting, positioning, handling, and placement of large loads at the required working height. Warehouses and Logistics Centers Handling large pallets, crates, containers, and shipment-ready loads. Improving efficiency in storage and material handling operations. Manufacturing Facilities Feeding large components to machines, assembly stations, and production lines. Supporting ergonomic material positioning during manufacturing processes. Assembly Workstations Positioning structures, frames, modules, and technical components at an optimal working height. Packing and Order Fulfillment Areas Handling large products, long materials, and shipment assemblies. Improving operator comfort and productivity. Workshops and Service Centers Lifting heavy machine parts, assemblies, tools, and structural components. Assisting maintenance and repair operations. Quality Control Departments Positioning large components at a convenient height for inspection, measurement, testing, or further processing. Loading and Unloading Areas Gujdpfx Akezdzgwoaog Supporting the transfer of loads between different working levels. Internal Material Handling Providing vertical transportation of large materials within warehouses and production facilities. Technical Specifications Parameter Value Maximum Load Capacity 1000 kg Minimum Height 300 mm Maximum Height 1060 mm Platform Length 2000 mm Platform Width 1000 mm Weight 250 kg Power Supply 400 V UDT Inspection Required Yes

Condition: new, Year of construction: 2026, TA100018 Stationary Scissor Lift Table – 1000 kg Capacity The TA100018 Stationary Scissor Lift Table is a high-performance hydraulic scissor lift designed for lifting heavy loads to significant working heights. With a 1000 kg load capacity, 400 V power supply, and a maximum lifting height of 1780 mm, this model is ideal for warehouses, manufacturing facilities, workshops, logistics centers, and production lines. Electro-Hydraulic Lifting System – 400 V The TA100018 features a reliable electro-hydraulic lifting system designed for intensive industrial operation, ensuring smooth and efficient lifting performance while maintaining high levels of safety and stability. Key Advantages of the TA100018 Scissor Lift Table 1000 kg load capacity – suitable for lifting heavy loads, components, crates, containers, and production materials. Lifting height up to 1780 mm – ideal for production lines, shelving systems, and assembly stations. Height range: 300–1780 mm – allows precise adjustment of the working level to suit operators and processes. 1300 × 820 mm platform – provides a stable working surface for larger loads. 400 V power supply – designed for intensive industrial and workshop use. Remote control operation – convenient lifting and lowering of the platform. Safety limit switches – automatically stop lifting at the maximum height. Safety toe guard – protects the area beneath the platform during lowering. Reinforced scissor structure – ensures stable and smooth lifting performance. 260 kg net weight – enhances stability when handling heavy components and materials. Applications The 1000 kg stationary scissor lift table is designed for environments where heavy loads must be safely lifted, positioned, and placed at specific working heights. It can be used as a workstation lift, lifting platform, production line component, or an aid for internal material handling. Warehouses and Logistics Centers Lifting loads, pallets, crates, and containers. Improving efficiency in material handling operations. Manufacturing Facilities Feeding components to machinery, assembly lines, and workstations. Supporting production processes with ergonomic load positioning. Production and Technological Lines Positioning materials at the correct working height. Integrating into automated or semi-automated production systems. Assembly Workstations Ergonomic positioning of heavy components during assembly operations. Packing and Order Fulfillment Areas Adjusting platform height to match operator requirements and load dimensions. Industrial Workshops Lifting parts, tools, structures, and technical components. Supporting maintenance and fabrication work. Godpozdy R Ujfx Akaeug Quality Control Departments Raising products to a convenient inspection height for measurement, testing, and evaluation. Internal Material Handling Vertical transportation of loads between different working levels. Technical Specifications Parameter Value Maximum Load Capacity 1000 kg Minimum Height 300 mm Maximum Height 1780 mm Platform Length 1300 mm Platform Width 820 mm Weight 260 kg Power Supply 400 V UDT Inspection Required Yes

Condition: used, Year of construction: 2010, Booklet Production HORIZON SPF-200A FC-200A VAC-100a VAC-100m This used Horizon booklet system is a powerful machine for professional production of saddle-stitched booklets. It consists of these main parts: - SPF-200A stitching unit - FC-200A front trimmer - 2 VAC-100a and VAC-100m collating towers with 20 feeding stations total Key features: - Fully automatic: Efficient and automated booklet production - Modular: Can add more collating towers to increase capacity - Flexible: Handles offset and digital prints, good for small to medium runs - Automatic format setting: Quick setup for different sizes - High speed: Up to 9,500 sets per hour - Error prevention: Checks for missing/double sheets and jams - Expandable stitching: Can upgrade to 4 stitching heads and loop stitching Technical specs: - Input size: max 508 x 356 mm, min 180 x 105 mm - Final booklet size: max 250 x 356 mm, min 85 x 105 mm - Paper weight: 64 to 300 gsm - Booklet thickness: max 25 sheets / 100 pages (80 gsm) - Speed: Up to 4,500 A5 or 4,000 A4 booklets per hour - Stitching: Standard 0.4-0.5 mm wire, optional 0.6 mm - Collating towers (each): - 10 stations - Size: max 500 x 350 mm, min 148 x 120 mm - Paper: 40-250 gsm - Capacity: 55 mm per station - Speed: Up to 9,500 sets/hour - Power: 230V/50Hz - Weight: About 1,365 kg - Size: About 3,450 x 810 x 1,250 mm (L x W x H) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Gujdpfozpwn Uox Akasg Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1997, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Colour: Cream Gsdpfezlytlox Akaoug Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm + stacking-station Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Gusdpfx Ajtk It Sokaog Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Gedpfx Akoz Abkyeaoug

Condition: good (used), Horizon BQ-270V Perfect Binder Machine in very good condition. In addition, the machine is equipped with the DV-270 unloading module. Ready to work. Very low mileage. Manufacturer’s description: Professional binder for perfect softcover. Fully automatic binder with an exceptionally stable type of construction, equipped with a hot glue gluing device, effective also for small and very small quantities of legs or sheets. The Horizon BQ-270V binder is a single-jaw machine with automatic cover feeding, which, operated by one person, delivers impeccably bound books in consistently high quality. Standardly equipped with a scanner measuring the thickness of the insert, it allows you to glue books using the „on demand” technology. Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm with a maximum number of copies up to 500 books/hour. Factory-built cutter with additional cutting knives. Maximum milling depth up to 3 mm. Guodpfx Aezyz Aqekaog Automatic cover feeding using a suction drum with a certain, constant setting relative to the bound sheets. A factory-built installation creating 4-fold creases on the cover, which is set automatically with precise adjustment. As an option, 6 creases can be installed for gluing books with bookmarks

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm Gusdpfxszx Suus Akajg - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2021, Used Palamides gamma 502ho delivery machine The Palamides gamma 502ho is an automatic delivery and banding machine, specifically designed for the efficient post-processing of print products such as brochures, flyers, greeting cards, and mailings. It is ideal for connection to folding machines, saddle stitchers, collators, or mailing lines and stands out due to its compact design, high flexibility, and ease of use. The gamma 502ho increases productivity, reduces operating costs, and enables efficient handling of large production volumes even with minimal staff. Key Features - Compact, mobile design: Requires only a small footprint and can be quickly connected to various production machines. - Automatic banding: Optional, robust impulse sealing system for secure and clean banding of stacks. - Intuitive operation: Clear touch display and user-friendly interface for quick setup and operation by a single person. - Flexible delivery: Stacks can be banded or delivered loose; the desired quantity is freely selectable. - Efficient waste control: Automatic ejection of defective products, production stop if too many defective copies occur in succession. - Large buffer table: Gives the operator sufficient time for quality control and packaging of stacks. - Seamless integration: Especially suitable for connection to the Horizon iCE StitchLiner Mark IV, but also universally usable for other machines—no additional interface required. - Industry 4.0-capable: Operational data acquisition and dynamic separation of book blocks of different sizes possible (DSP platform). Gjdpozrlp Eefx Akasug Technical Specifications - Infeed format: 4-page sheets, variable from 650 to 1,000 mm - Product thickness (max.): 100 mm (optional 120 mm) - Format (max.): 510 x 235 mm - Format (min.): 140 x 95 mm (optional 95 x 75 mm) - Performance: up to 600 packs/cycles per hour - Main connection: 3ph+N+GND 400V AC, 50/60 Hz - Control voltage: 24V DC - Power: 4 kW - Fuse: 16A - Year of manufacture: 2023 - Weight: approx. 500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2023, Used machine Gjdezk Nn Aepfx Akajug Year of manufacture: 2023 Condition: as new, machine is unused Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Useful length of the spindle: 125 mm - Spindle mandrel diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Maximum tool diameter that can be lowered: 230 mm - Maximum tool diameter for profile milling: 240 mm - Maximum tool diameter for tenon milling: 320 mm - Work table length: 1,200 mm - Work table width: 530 mm - Table height: 900 mm - Slide carriage length: 1,200 mm - Slide carriage width: 360 mm - Slide carriage height: 142 mm - Extraction nozzle diameter: 2 × 120 mm - Drive motor power: 5.0 kW - Mains voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: at short notice Storage location: DE-63934 Röllbach

Condition: good (used), Year of construction: 2005, functionality: fully functional, load capacity: 600 kg, 260/220 bar Gedpfx Akowrr N Ijaeug The Flexlift FCE1000 is a versatile lift table with an integrated tilting function, ideal for a wide range of industrial applications. It enables precise lifting, lowering, and tilting of loads, making work processes more efficient and ergonomic. The robust design ensures high stability and durability, while the simple operation allows for quick integration into existing production flows.

Condition: good (used), Year of construction: 2005, functionality: fully functional, load capacity: 600 kg, 260/220 bar The Flexlift FCE1000 is a versatile lift table with an integrated tilting function, which is perfect for a wide range of industrial applications. It enables precise lifting, lowering, and tilting of loads, making work processes more efficient, ergonomic, and safe. The robust and stable design ensures high durability and reliable performance in daily use. Thanks to its user-friendly operation, the lift table can be quickly integrated into existing production processes, making it a practical solution for demanding lifting and positioning tasks. Gsdswrr Ahjpfx Akaoug

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, overall weight: 55 kg, total length: 700 mm, total width: 1,880 mm, total height: 850 mm, TOP work table AT 1880 with stainless steel top Work table for gastronomy/bakery Stainless steel worktop Lower storage shelf Reinforced welded construction Approx. dimensions: 1880 x 700 x 850 mm (W x D x H) Used unit, cleaned Gsdpfxeyhy E Se Akasug Option: Delivery service New castors/wheels We have many more work tables in stock!

Condition: ready for operation (used), Year of construction: 2006, weight max. in kg 1000 kg table length 1500 mm table width 1000 mm height over floor 200 mm stroke height 200 - 1200 mm stroke Zeit ca. 15 sek total power requirement 2.3 kW weight 330 kg current new price approx. 5.000 euros special price on request Equipment: - Robust electro-hydraulic scissor lift table - for ergonomic working at an optimum working height - with closed platform Guodpfey Ez Awex Akajg - stepless lifting and lowering - All-round safety rails - Placement: free-standing on the floor or as a pit installation - remote control

Condition: reconditioned (used), Year of construction: 2008, Horizon HT-30 Used trimmer for cutting three sides in a single pass Year 2008 Counter: approximately 1.7 million cuts Standard equipment Inspected, cleaned, and refurbished Guodpfx Aezxdhyskaog Option to add A6-size trimming capability – please let us know! Excellent condition Available in stock

Condition: used, Year of construction: 1998, Format: 650 x 320 mm Equipment: Guodpfx Akozkapdsaeg 1 clamp Milling and Notching Station Spine Gluing Side Gluing Hotmelt Automatic Cover Feeder Nipping Station Up to 600 cycles/hour Voltage: 3-phase, 400 V or 230 V 3.3 kW

Condition: good (used), Year of construction: 2008, functionality: fully functional, load capacity: 1,000 kg, 250 bar Godpfewtd Dtsx Akaeug The Flexlift FCE1000 is a versatile lift table that features an integrated tilting function, providing a flexible solution for a wide range of industrial tasks. It allows loads to be lifted, lowered, and tilted precisely to the desired angle, making workflows significantly more efficient, ergonomic, and safe. Its robust and stable construction ensures long service life and reliable performance in daily operations.