Used Jinaolan Alp-25V for sale (529)

Year of construction: 1986, condition: used, Manufacturer : Saint-Gobain Desjonqueres Model : Debalpack 800. Type : Unpacker of bottles under film. Year : 1986 Saint Gobain accumulation table Introduction of the pack in automatic Automatic pack opening Automatic bottle transfer Automatic film evacuation Isdpfjzg I Utox Adlstl Automatic film ejection History, documentation, and electrical diagrams available.

Condition: used, Year of construction: 2007, Bundle delivery system Palamides alpha 700 Itjdpjy N Un Ujfx Adljl Maximum feed-in size: 800 x 330 mm Stack height: 16 cm Triple stream Automatic format adjustment in running direction

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, product width (max.): 250 mm, working width: 247 mm, number of drawers: 4, roll width: 250 mm, roll diameter: 600 mm, inner diameter: 76 mm, EDALE ALPHA 250 year 2007 web width 250mm 4 - color 4 - IR dyer's 2 - die stations(1-sheeting station) 1-rewinding station Ijdpfx Adjyrzy Ujljtl 1-waste rewinding station web camera (visi-tech) slitting station (round blades) web guide (E+EL) Magnetic cylinder: 76Z,77Z,91Z,93Z,96Zx1pcs (total 5pcs) Print cylinder : 76Z,79Z,83Z,,91Z,96Zx4pcs(total 20pcs) The machine is in very well running condition and can be seen and tested at any time.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 Iedpoy D Hy Eefx Adletl • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP. MACHINE IS READY TO WORK. Ijdpfx Adezquq Asljtl

Condition: new, functionality: fully functional, CAT336 General Purpose Bucket Itjdpoyki Tgefx Adljl

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system Iodpezwftzsfx Adlstl - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: new, Year of construction: 2025, Cryogenic centrifugal pump unit CRYOBASE CPD 160, year 2025 For sale is a like‑new cryogenic centrifugal pump unit CRYOBASE model CPD 160 with horizontal electric drive motor for liquid nitrogen / oxygen / air (LIN / LOX / LAR). The pump has never been in service, was stored dry, and only mounted for test fitting; all original nameplates and safety stickers are in place. Key technical data Type: centrifugal pump CPD 160 for cryogenic liquid gases Flow rate: approx. 300 l/min Differential pressure / head: 22 bar / 160 m Motor speed: 6,750 rpm Motor power: 22 kW, IE3 efficiency Fluid: LIN / LOX / LAR, temperature down to about −176 °C Design: horizontal execution, axial suction flange, side discharge flange Required NPSH: 0.5 m This unit is perfect for industrial gas plants, storage and distribution systems, or upgrading existing cryogenic tank stations. Ijdjznv Azepfx Adlotl Machine location: Cologne, Germany; inspection by appointment, worldwide shipping on request.

Condition: new, Year of construction: 2024, Manufacturing of General Purpose Buckets for 20tons excavators, ensuring durability and good performance in various applications. Iedpfjvdc N Dsx Adljtl Edge Length: 1200mm Capacity: 1m3

Condition: new, Year of construction: 2023, Layout: Shears Empty weight: 1.700 kg Attachment suited for: Construction machines Warranty: 6 months Selling price: € 12.000, US$ 12.630 MECHANICAL PULVERIZER FOR SALE FROM STOCK SUITABLE TO WORK IN THE DESTRUCTION ZONE Itjdpfon Tm A Ejx Adlel MACHINING PROCESS WILL BE DONE AND DELIVERED ACCORDING TO THE MACHINE YOU HAVE ATTACHMENT WEIGHT: 1700KG The mechanical pulverizer is a cost-effective way of demolishing concrete structures and processing concrete on site, reducing transport cost and increasing productivity. Simple installation, no hydraulics needed. Direct-mount and coupler styles available. Fully greaseable bushings Replaceable four-way rotatable rebar cutters as standard equipment.

Condition: new, Year of construction: 2025, CAT349 General Purpose Bucket Blade Width: 170 cm Capacity: 2.6 m³ Contact us to get pricing for buckets to your excavators! Itjdpfsvrquwex Adlel

Condition: new, Year of construction: 2025, Manufacturing of a 20-Tons Excavator Bucket Machine Model in the Video: JCB JS220 Bucket Type: General Purpose Edge Length: 120 cm Capacity: 1 m³ Iodpev H R Dnsfx Adlstl Contact us for a price quote!

Condition: new, Year of construction: 2023, Hyundai R140 General Purpose Bucket Iedpjp I E U Ujfx Adljtl

Condition: as good as new (ex-display), PIV braking resistor Type 800 Watt DC 540/625 Volt 3 Amperes Unused, in opened original packaging Itjdpfxsh Ebd Se Adlel 6.5 kg

Condition: used, mileage: 78,198 km, power: 107 kW (145.48 HP), first registration: 09/2012, fuel type: diesel, empty load weight: 3,405 kg, maximum load weight: 2,595 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,700 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 1,700 mm, loading space width: 1,650 mm, loading space height: 800 mm, Equipment: additional headlights, air conditioning, all wheel drive, cabin, crane, differential lock, trailer coupling, * German vehicle * 1st hand * See photos for condition * Complete documentation incl. test books and checkbooks available * Only 2,933 operating hours * Three-way tipper with crane behind the driver's cab * Palfinger crane * Type PK 3400 A * Hook height 9m * 5th + 6th control circuit * Grapple control * 2 hydraulic extensions * 2 hydraulic outriggers * 6.40 m = 430 kg. * 4.90 m = 600 kg. * 3.40 m = 870 kg. * Load capacity 990 kg. * Municipal plate with all hydraulic connections * Working plate suitable for various attachments * Various attachments available at extra cost * for example snow blade/ flail mower/ Mulag or Fiedler front boom etc. * Three-way tipper * Tipper length 1.70 m x 1.65 m * Tail lift elevation 0.80 m * DIN lashing eyes * High front wall * Trailer coupling * 3,500 kg towing capacity * Various storage compartments * Cab with air conditioning * Auxiliary heating * 2 air-sprung comfort seats * Heated seats * 5-speed gearbox * Diff locks * Rotating beacons * Wheelbase 2.70 m * GVW. 6,000 kg. * Unladen weight 2,405 kg. Itjdpfjvhp Tkox Adlel * Payload 2,595 kg. If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Foliant Gemini 400G Automatic Laminator Fully Automatic Digital Print Laminating Machine. Deep Pile Auto Feeder - 300mm Paper stack capacity Max sheet size B3 (380mm wide) Max production speed 15 m/min ( 1,800 x SRA3 sheets per hour) Built-in compressor for high-pressure laminating rollers. Auto-control for miss-sheet detection and quality control. Itsdpfxjvrd E Aj Adljl Large roll film capacity. (up to 3,000 m) In-line sheet separation. Delivery into a paper jogger 220/240 volt - 50Hz

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Itjdeudbzyopfx Adlol Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: used, functionality: unexamined, Ferwood Code: RU0009187 - Manufacturer Code: TP010-MX1-10-040-001 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Itodpsv Hrc Ssfx Adlol

Condition: used, Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur Gearbox Type: 1FT6064-1AF71-3EG1 Serial No.: YF P921 8717 07 001 Year of manufacture: 2002 Rated torque = MO: 7.9/9.5 Nm Rated current = Io: 5.0/6.1 A Max speed = n. max.: 4550 rpm ALPHA Angular Gearbox Type: PKF 160-MF2-18-031-000 Article code: 20026113 Isdpfx Adjxciw Uslotl Gear ratio 18:1 (Gearbox input = 18 revolutions, gearbox output = 1 revolution) Hollow shaft outer diameter 68 mm Hollow shaft inner diameter 55 mm Shaft stub length 50 mm Centering diameter 140 mm Housing dimensions L/W/H 650 x 160 x 195 mm Weight: approx. 50 kg Good condition Removed from a fully functional custom machine, tested prior to removal.

Condition: new, Year of construction: 2025, BAYKAL Plasma Cutting Machine Systems, BPL H: Highly accurate and reliable performance with positioning speeds. Key Advantages of BAYKAL Plasma Cutting Machine Systems; BAYKAL Plasma cutting is comparatively cheap for medium thickness cuts. High-quality cutting for thicknesses up to fifty millimeters. Maximum thickness of one hundred and fifty millimeters. Plasma cutting can be carried out on all conductive materials, in contrast to flame cutting which is only suitable for ferrous metals. When compared to flame cutting, plasma cutting has a significantly smaller cutting kerf. Plasma cutting is the most effective means of cutting medium thickness stainless steel and aluminum. Faster cutting speed than oxyfuel. CNC plasma cutting machines can offer excellent precision and repeatability. Plasma cutting can be carried out in the water which results in smaller heat-affected zones as well as minimizing noise levels. Plasma cutting can cut more complex shapes as it has high levels of accuracy. Plasma cutting results in minimal dross as the process itself gets rid of excess material, meaning very little finishing is required. Isdpor En Riefx Adlotl Plasma cutting does not lead to warping as the fast speed significantly reduces the heat transfer.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Itjdpfx Adoyfl U Nslsl

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy timber cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Frame and truss manufacture • Pallets and boxes manufacture • Furniture manufacture • Planters manufacture • Retail timber sales Can be used with all your existing saws including: Iedpfx Ajf Dqhlodljtl • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 6 m Stroke: 5580 mm Pushing capacity: 20 - 40 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), functionality: fully functional, Odenberg Alpha Potato Grading Machine with Screen Iedpoyku Suefx Adljtl

Year of construction: 2003, condition: ready for operation (used), Load capacity: 25t, center of gravity distance: 700mm, eccentricity: 250mm, speed: 0.66rpm, tilt range: 0°-130°, tilt time: 120s, table height (flat): 1930mm, axis of rotation height: 1600mm, table diameter: 2500mm, motor power tilt/rotate: 7.5kW/4.5kW, total length: 3000mm, total width: 2500mm. Documentation available. On-site inspection is possible. Iedpfx Adsu Tiz Telotl

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Iedpfx Aoua E Txedlotl