Used Joema L - Form for sale (66,607)

Condition: used, Year of construction: 2019, Overview Set of three cylindro-conical fermentation tanks built by Shandong Tiantai in 2019 - two of 1,000 litres and one of 7 BBL (approx. 820 litres). All three vessels are built in stainless steel SS304, rated for 4-5 bar working pressure and fitted with a cooling jacket with glycol inlet and outlet, a level gauge, an inward-opening side manway and a bottom outlet valve. The tanks stand on welded legs and are still installed at the site in Spain, where they can be viewed by appointment. A compact fermentation block for a craft brewery adding or replacing tank capacity. Technical data - Year of manufacture: 2019 - Units: 3 tanks - 2 x 1,000 L and 1 x 7 BBL (approx. 820 L) - Dimensions (approx.): Ø1210 x H2550 mm (1,000 L tanks), Ø1060 x H2550 mm (7 BBL tank) - Material: stainless steel SS304 - Design: cylindro-conical, isobaric pressure vessels on welded legs - Working pressure: 4-5 bar Prsdpfx Aloz Atq Sowsb - Cooling: cooling jacket on every tank, glycol inlet and outlet - Fittings: level gauge, inward-opening side manway, bottom outlet valve Scope of Delivery - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 7 BBL (approx. 820 L) | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 Condition Used, still installed at the current site. Viewing possible by appointment. Availability Immediately available.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,010 h, load capacity: 1,600 kg, lifting height: 4,800 mm, free lift: 1,694 mm, fuel type: electric, mast type: triplex, construction height: 2,171 mm, fork length: 1,150 mm, empty load weight: 1,439 kg, total length: 895 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Load center: 500 Mast type: Triplex Technical condition: normal Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 300Ah Battery year of manufacture: 2018 Prsdjz Awyqepfx Alwsb Impulse control, initial lift, full free lift, CE certificate.

Condition: good (used), 400mm wide screw feed former with recent control screen upgrade by GEA. Has been used for production of vegetarian products. Can be supplied with other machines to make a complete coating and frying line. Prsdpsg E S H Refx Alwsb

Condition: excellent (used), Year of construction: 1999, operating hours: 48,400 h, 1 unit of used blow molding machine Podpfx Aloynutmeworb Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of manufacture: 1999 Clamping force: 120 tons Extruder type: 120/24 WT Accumulator head: BFKS25, equivalent to approx. 17.75 kg The machine can produce containers up to a size of 200 liters. A tool for a 120-liter container with a press-ring closure is available for the machine. Video available!

Condition: good (used), 400mm multiformer in lovely condition. Prodpov D Hfpjfx Alwob

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Prjdpfxszz A Rxo Alwjb On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Stöber FDS5055/L Posidrive servo drive HW 11 SW 5.3C, serial number: 8702144, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Pedpfx Alsz Ac I Hewerb

Condition: new, Siemens SIMOTICS-L primary part 1FN3100-1WC00-0BA3, 3-phase synchronous motor SN: YF L7618 4379 01 002, unused, in sealed original packaging, 100% functional, scope of delivery as shown in photos. Podpfx Alsz Acqbswerb

Condition: ready for operation (used), Transroll spindle L = 680 mm, Ø thread: 25 mm, pitch: 10 mm, Ø shaft: 20 mm, length shaft: 105 mm, Ø ball cage: 43 mm, flange: 45 x 66 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Psdjz Adaqspfx Alwerb

Condition: ready for operation (used), Tecalemit TX34221 YD grease pump / central lubrication system with manual lever – 2.85 liter tank capacity, used, in good condition, 100% functional, scope of delivery as shown in the photos. Prodpfx Aljz Ac S Ejwob

Condition: used, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 4,660 mm, fork length: 1,200 mm, total length: 3,880 mm, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 Podpfx Aljxd Et Iswsrb - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) 4 ohne Last N 10650/8015 - Max. Zugkraft (Plus*//Standard Performance) 4 mit Last N 20900/16920 - Max. Zugkraft (Plus*//Standard Performance) 4 ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen

Condition: ready for operation (used), TACHII 1990 sensor cable/interface cable, length 3.4 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Predpfx Alez Dnzlsweb

Condition: ready for operation (used), OKI DENKSEN 1990 Sensor cable, length 40 cm, with 2 Honda MR-20LW 20-pin connectors for Fanuc, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pedsz Dny Uspfx Alwerb

Condition: used, machine/vehicle number: 008245, Max. panel width: 1000 mm Max. panel length: 2500 mm Prodpfx Aloywad Rjwob Length of conveyor: 11500 mm Panel return for edgebander: Left

Condition: used, mileage: 2,86,032 km, power: 350 kW (475.87 HP), first registration: 06/2024, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Euro 6 climate ABS ASR lane keeping assistant Prsdsz Dmdrjpfx Alwob emergency brake assist double tank

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 7.4 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Prsdpsz Dn Acefx Alwob

Condition: ready for operation (used), TACHII 1990 sensor cable/interface cable, length 3.9 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Podpfx Aoz Dnzxjlwjrb

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 4.2 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Pjdpfx Ajz Dnz Eslwsrb

Condition: used, mileage: 4,09,090 km, power: 368 kW (500.34 HP), first registration: 06/2017, fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,500 mm, total height: 4,000 mm, loading space length: 9,450 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, MAN TGS 35.500 8x2-4 BL ZANNER MACHINE TRANSPORTER WITH HYDRAULIC RAMPS/SUPPORTS/WINCH Cab: * 'M' cab (2240 mm wide, 1880 mm long) * MAN Media Truck Advanced 12 V with 7" color display * Navigation SD card EUROPA COMPLETE * "Comfort" hands-free system for 2 mobile phones * MAN TeleMatics 2 GPRS 'Service package MAN TeleMatics' * MAN sound system * Connectivity board module * CB radio Stabo XM3003e * Instrument panel km/h 'High-Line' * Driver's comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating * Passenger seat, static, longitudinally, backrest, and height adjustable * Auxiliary air heater EBERSPÄCHER D4S * Air conditioning AC R134A, CFC-free with automatic temperature control * Central locking * AUX-in/USB in the dashboard * Cool box * 1 pull-out drawer * Electric door window lifts * Entry lighting * Cab suspension, air-sprung * Brushed aluminum decorative trim on the dashboard ----Exterior: Sun visor * Air horns * Rear and wide-angle mirrors, heated and electrically adjustable * Curb mirror, right side, heated and electrically adjustable ----Lights: Headlight range adjustment * High and low beam headlights, with additional turning lights * Halogen twin headlights H7 for right-hand traffic * 2 halogen roof marker lights * Maneuvering light at the entry * Position lights and side marker lights ----Safety and driving comfort: MAN BrakeMatic (electronic braking system) * Anti-lock braking system (ABS) * Traction control system (ASR) * ECAS air suspension system * Digital axle load display (ALM) in the cab for air-suspended axles * Electronic speed limiter 89 km/h * Cruise control * Hill start assist * Differential lock in rear axle ----Technical data Engine: D2676LF51 - 500 hp / 368 kW EURO6 SCR - 2500 Nm C-R OBD-C * Transmission: MAN TipMatic® 12 26 DD with professional software (road use) * PTO NH/4C without flange f=0.97, right side, horizontally mounted * Tag axle, articulated & liftable * Emergency steering pump * MAN EasyStart with TipMatic * MAN PriTarder * Flame start system ----ZANNER MACHINE TRANSPORTER BODY with its own hydraulic unit * Hydr. loading ramps, movable (3-part) * Hydr. additional supports * Hydr. winch * Zanner low-loader body with ribbed steel floors * ALU storage box * Trailer socket 12V 13-pin and 24V 15-pin & ABS * Crossmember for trailer coupling ----* Tire dimension front axle: 385/55R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 390 ltr. * AdBlue tank: 35 ltr. * Technical gross weight: 36000 kg * Unladen weight: 15260 kg * Permissible trailer load: * Overall length: 12125 mm * Wheelbase: 1795 mm * Next inspection due: 06.2026 ----Vehicle number/Vehicle: 11441----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will gladly assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge: ----Trade-in of your old vehicle TÜV/inspection appointment Complete export processing Arrangement of financing Application for export license plates Vehicle transport Prsdpoy Hn Nmofx Alweb Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: Hanaoka, hydraulic scissor lift table trolley, scissor lift trolley type L-150 -Load capacity: 150 kg -Platform: 710 x 450 mm -Dimension when retracted: Height 220 mm Pjdpfx Aez Duguslwerb -Extended dimension: Height 720 mm -Transport dimensions: 810/450/H230 mm -Weight: 38 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,950 kg, maximum load weight: 23,050 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, total length: 9,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis – Central axle trailer design Fine-grained steel welded construction Gear-supported front leg Hydraulic rear supports Wheel chocks with holder Aluminum side impact protection Without under-run protection Mud flaps at the rear, covering the entire width Mud flaps in front of each axle and anti-splash mud flaps behind each axle Plastic tool box, with insert, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening elements to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3,000 mm Tie-down points for low-bed trailers Recessed ring-type tie-down points in the outer frame, each rated at 5 tons (can be converted to stake pockets) Tie-down eyes at the top and on the sides in the outer frame, each rated at 10 tons Towing device – Central axle trailer Drawbar with a tested 50 mm tow hitch Axles + Suspension Drum brake axles "Axles/chassis laser-aligned" – reduces tire wear and fuel consumption Last axle with trailing arm steering, with automatic reversing lock controlled via the reversing light, and an additional locking function on the vehicle via a manual button. Air suspension 1st axle – automatic lift axle, additionally manually lowerable, operable with a button on the vehicle Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle height in conjunction with the lift axle; when the lift axle is raised, the loading or overall height increases by 50 mm Vehicle – Driving stability system Trailer Info Center for displaying vehicle data such as axle loads, mileage, and diagnostic/system messages Axle load detection via EBS-CAN bus signal for display on the display in the cab Wheels and tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin fail-safe plugs at the front, with connection cable Additional LED work light at the rear LED rotating beacon with mount Warning signs, LED illuminated and extendable to 3,000 mm Pedszcv D Nepfx Alwjrb Floor Subsequently with 70 mm softwood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Low-bed platform including rear slope 7,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood Hydraulically operated via towing vehicle’s auxiliary drive with throttle, operation on the left side in the front Hydraulic lateral adjustment of the ramps, individually controllable Hydraulic connection with quick-release coupling NW 10/3, including connection hose Customized transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,740 kg, maximum load weight: 14,260 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Attention: Archive pictures are used! Chassis Heavy-duty welded steel low-loader turntable trailer chassis Heavy-duty turntable with ball-bearing race Integrated storage box in turntable front section Folding rear support Wheel chocks with holders Aluminium side underrun protection Full-width rear mud flap Semi-circular mudguards on 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd axle Spare wheel carrier incl. spare wheel (steel rim) Lockable plastic toolbox with shelf (padlock not included) Lashing Equipment 3 pairs of integrated 10 t lashing points at the front 5 pairs of recessed 10 t lashing mushrooms on top and sides of the outer frame Additional 5 t recessed lashing rings instead of stake pockets Maximum spacing between lashing points: 1,200 mm Drawbar Height-adjustable drawbar with certified 40 mm towing eye, angled by 8° Axles & Suspension SAF drum brake axles Laser-aligned axle and suspension geometry for reduced tyre wear and fuel consumption Maintenance-free parabolic spring suspension with steel-rubber bushings Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Two anti-mix coupling heads with air lines to towing vehicle ABS & ALB with front ABS connector and connection cable Compatible only with towing vehicles supporting ABS functionality Electrical System 24 V lighting system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front connectors with connection cables Loading Platform Steel deck in front section 70 mm softwood flooring Steel chequer plate over wheel arches Rear beavertail with 70 mm timber flooring Total low-bed loading area incl. beavertail: approx. 7,200 mm Loading Ramps 2 steel loading ramps Length: 2,800 mm Width: 750 mm Side-adjustable Timber-covered Spring-assisted lifting Foldable lower ramp locks to prevent lateral movement Operating Notes A special permit is required for 10,000 kg axle load (approval must be obtained individually in each German federal state). Podozl R S Sspfx Alwsrb The stated gross vehicle weight is technically possible; depending on the cargo, the maximum permissible weight may not be achievable while complying with legal axle, kingpin and support loads. Registration Registration: Germany EC type approval (2007/46/EC) 24/7 service hotline Prepared for two-line licence plate holder ECE R48 reflective contour marking (white sides, red rear) ECE 70 rear warning plate

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Prodpfxjy Alcie Alwsb Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, machine/vehicle number: P21173L02098, Year of construction: 2022, operating hours: 7,209 h, load capacity: 1,400 kg, lifting height: 1,844 mm, fork length: 1,150 mm, empty load weight: 1,400 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 1,844 mm Fork length: 1,150 mm MACHINE DETAILS Battery type: Lithium-ion Battery voltage: 24 V Battery capacity: 410 Ah Battery voltage at rest: 25.5 V Dimensions Dimensions (L x W x H): 2,100 x 800 x 1,490 mm Dead weight: 1,400 kg Service valid until: 09/2027 UVV certificate valid until: 09/2027 Operating hours: 7,209 h EQUIPMENT Former Linde full-service unit Folding platform Charger All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. In case of non-timely collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Psdpez Dfq Dsfx Alwsrb Lot number: 464

Condition: used, Year of construction: 2022, These Efaflex power-operated high-speed doors, mostly manufactured in 2022, model: EFA-SRT0-L MS, with dimensions of approximately 177 x 40 x 280 cm / door opening of approximately 130 cm, are being auctioned online in our industrial auction "Components from the restructuring of the battery module production (BMW Group Leipzig plant) - Festo control systems, motors, conveyor technology, high-speed doors." Bid on 150 items now until September 30th. Other highlights of this auction: - EFAFLEX power-operated high-speed doors - Festo fieldbus I/O stations with valve manifolds - Rittal control cabinets with locking mechanisms - SEW Eurodrive geared motors with chain sprockets - SNR NTN linear axis systems and 16x roller conveyors Pedpfxoz Erbrs Alworb Inspection is only possible after prior registration via our auction platform, no later than 24 hours before the appointment on Tuesday, September 29th, from 2:00 PM to 2:30 PM. You can find these and many other items on our platform.