Used Walter Td 500 for sale (66)

Condition: good (used), min. width of the middle prism after cutting 55mm minimum length of the cut shaft 1270mm maximum diameter of the cut shaft 350mm shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter power of the lower spindle drive motor 45kW power of the upper spindle drive motor 37kW power of the feed drive motor 1.50kW Cedpfx Apjwmg Saotsrg

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition Csdpfomv Ekysx Aptjrg – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Suitable for cutting round wooden logs with 2 Spindles. Cjdpfx Apewini Ejtsrg Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2081-9007, total height: 2,200 mm, total length: 1,462 mm, total width: 1,750 mm, workpiece weight (max.): 20 kg, type of input current: DC, overall weight: 3,300 kg, travel distance X-axis: 250 mm, travel distance Y-axis: 795 mm, travel distance Z-axis: 250 mm, input frequency: 50 Hz, input voltage: 230 V, workpiece length (max.): 700 mm, workpiece width (max.): 200 mm, workpiece height (max.): 700 mm, protection type (IP code): IP54, Equipment: documentation/manual, type plate available, Measuring machine with 4 NC-controlled axes, featuring non-contact measurement technology and an additional measuring probe for the automated measurement of micro-precision tools such as milling cutters, drills, step and profile tools. Extended measuring range, specifically for long tools up to 700 mm in length. Due to an additional backlight camera with 400x magnification, even the smallest tools, i.e., microwork tools, can be measured in terms of contour or profile. Thanks to the 400x magnification in both backlight and front light, microwork tools can also be measured using the backlight method. Backlight CCD matrix camera 1, magnification = 50x, diameter (up to 150 mm) and length measurements (up to 700 mm), angle measurements, and radii of the outer contour can be measured. Backlight CCD matrix camera 2, magnification = 400x, observation at the tool circumference, diameter, length, angle measurements, and radii of the outer contour of mini or microwork tools can be measured. Cedpfx Apszvdxajterg Front light CCD matrix camera 3, magnification = 400x, observation of the side view, e.g., helix angle, chamfer width, chip space depth, chip, spiral, and relief angles. Front light CCD matrix camera 4, magnification = 400x, observation of the end face, axial, relief, and radial angles, chamfer widths, center distances. Tool holder SK 50. Software features, see PDF Software License. The machine is sold as a complete workstation with all existing accessories. Also available with a second

Condition: excellent (used), Year of construction: 2000, operating hours: 25,943 h, functionality: fully functional, machine/vehicle number: 175, total width: 1,350 mm, total length: 1,400 mm, total height: 2,250 mm, grinding spindle motor power: 1,100 W, input voltage: 380 V, overall weight: 1,450 kg, grinding spindle speed: 2,625 rpm, The machine is in perfect working order and underwent a major overhaul in 2020, during which the following parts were replaced or added: - All axes were replaced (including guides, lead screws, all bearings, and supports). - All gears and belts were replaced. - An automatic lubrication system was installed for all axes. - The internal lighting system was modified to highlight all sharp details. Crjdpfx Apezxup Ustjg - LCD monitors were replaced. - The machine was fitted with an oil mist extractor. - Included is a replacement hard drive containing all the software.

Condition: used, Year of construction: 1991, functionality: fully functional, input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, total length: 1,450 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 3,500 kg, We are offering this used Walter hydraulic press, manufactured in 1991, for sale. Credpezxp Ufefx Aptog Year of manufacture: 1991 Condition: used If you have any questions or require further information, please do not hesitate to contact us by sending a message or calling us. Documentation is available.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Includes: 2021 Ebbco Filtration & Chiller unit Model PMF-MWF5-623-P-40K capable of filtering & chilling up to 2 grinders. 40,000 BTU Chiller & filtration up to 1 Micron. • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 Cedpfx Apeu Ez Huetjrg • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 • Currently in production producing very accurate & consistent tools. Can be viewed under power • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like.

Condition: excellent (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, - Used continuous processing system (belt grinder) - The processing trough needs to be replaced. Codpfx Aszqunzspterg

Condition: like new (used), Year of construction: 2025, operating hours: 650 h, functionality: fully functional, total height: 2,274 mm, total length: 3,061 mm, total width: 2,129 mm, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 3,300 kg, rotational speed (max.): 10,500 rpm, travel distance X-axis: 320 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 470 mm, input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 4,000 mm, space requirement height: 3,000 mm, Equipment: rotational speed infinitely variable, WALTER CNC Grinding Machine HELITRONIC MINI PLUS (RAPID version) GE Fanuc Series 31i - B5 2025 650 working house. please see all information in attached PDF file * Machine Type: WALTER CNC Grinding Machine HELITRONIC MINI PLUS (RAPID version) * Fire extinguishing system DIMES * Holder for sharpening stones * Tool gripper * Protective and cleaning arbor * Plug gauge * Setting disc * Pull stud * Clamping arbor for hobs (diameter 32 mm) * Clamping arbor for hobs (diameter 40 mm) * Foot operated switch Crjdoztti Ajpfx Aptsg * Keyboard shelf * Standard grinding wheel adaptor (HSK50 form A, d20, D50, L55, L1=25 mm) * Standard grinding wheel adaptor (HSK50 form A, d20, D50, L55, L1=45 mm) * Standard grinding wheel adaptor (HSK50 form A, d20, D50, L55, L1=85 mm) * Dynamometric Key / torque wrench * Dynamometric Key * Mounting wrench * Sensor * Coolant unit Location in Israel . ready for inspaction . need export license

Condition: new, Walter Technic Compressor Model: SKTG 5.5 PP Kombo Dryer, Automatic condensate drain, Tank: 500 litres, Cedpfey Nlwtox Aptorg Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 505 kg.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Walter Helitronic mini Power FANUC Csdpfjzwz Uzex Aptjrg

Year of construction: 2023, operating hours: 4,371 h, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, spindle motor power: 11,500 W, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details. • Operating hours: approx. 4,371 h • Working range: • Tool diameter: Ø3–290 mm (optional up to Ø400 mm, depending on configuration) • Maximum tool length: 270 mm (optional up to 350 mm, depending on configuration) • Maximum tool weight: 50 kg • Axes: • Number of CNC axes: 5 • Linear axis speed: up to 15 m/min • Spindle: • Max grinding wheel diameter: Ø200 mm • Interface: HSK • Belt-driven, double-ended spindle • Grinding / Eroding: • Grinding and EDM in one setup • For carbide, HSS, PCD, CBN tools • Configurable for up to 3 electrodes and 3 grinding wheels, or alternatively up to 6 grinding wheels • Control / Machine design: • WALTER / UNITED GRINDING CNC control • Enclosed working area with automatic protective door Additional equipment • Automatic loading/manipulator system for shank tools (automatic tool loader/manipulator) • Process cooling system • Coolant/dielectric filtration and circulation system • Coolant/dielectric system • Tool holders Cjdpfozxg Tfjx Apterg • Flanges/adapters • Grinding wheel/electrode accessories

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Machine can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor Codpfswu Nw Ujx Aptsrg x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, throat depth: 455 mm, total width: 860 mm, total length: 2,000 mm, total height: 2,050 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 2,000 kg, sheet thickness steel (max.): 4 mm, Number of strokes 150 / 300 / 600 Min. Maximum sheet thickness 6 mm Horizontal troath 675 mm Vertical troath 455 mm Max. thickness Stainles 4 mm Max. thickness Aluminium 8 mm Motorised ram adjustment 0 - 80 Power 4.5 kW Crjdpfx Apezxf Eyotog Dimensions (Estimate) Length 2000 mm Width 860 mm Height 2050 mm Weight 2000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, operating hours: 53,676 h, machine/vehicle number: 730301, saw blade diameter: 810 mm, tooth pitch: 4 mm, grinding wheel diameter: 200 mm, total width: 2,074 mm, total length: 3,870 mm, total height: 2,725 mm, type of input current: three-phase, input current: 5 A, year of last overhaul: 2025, input frequency: 50 Hz, grinding spindle motor power: 1,500 W, input voltage: 400 V, overall weight: 2,200 kg, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, coolant pump power: 500 W, feed length X-axis: 350 mm, feed length Y-axis: 350 mm, feed length Z-axis: 250 mm, grinding spindle speed: 3,000 rpm, workpiece weight (max.): 2,800 kg, The machine is in working order and has a valid inspection certificate until 2025. It has been modified to work in conjunction with a Comat machine (an oil coolant cleaning system that manages 4 machines and contains 1100 liters of oil). It is also possible to switch to the internal 175-liter tank. Crjdpfx Apezyc Unotog The machine is also equipped with a filter to eliminate oil mist. All work invoices for the machine, performed by Walter’s technicians, are available.

Condition: excellent (used), Rotary table, manufacturer: Walter Crodpfx Apezk A U Astjg Type: RT 630 MP Heidenhain digital display Resolution: degrees-minutes-seconds Clamping surface diameter: 630 mm Height in horizontal position: 180 mm Height between centers in vertical position: 460 mm Motor: 400 volts, 1300 rpm Rotary table speed: 1.37 rpm Transport dimensions: Length: 1050 mm Width: 500 mm (with pallet: 800 mm) Height: 1220 mm Weight: 915 kg

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm Csdpfxsmv Elpe Aptjrg dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: excellent (used), The WALTER WD 250/350 twin-spindle multi-blade saw is equipped with two independent spindles with power ratings of 30 kW and 37 kW. The machine is in perfect technical and visual condition, fully functional, and ready for immediate operation without any additional financial investment. Its robust construction and powerful drive units guarantee high performance, cutting precision, and reliability during multi-shift operation. The WD 250/350 model is designed for longitudinal cutting of solid wood and wood-based materials. Thanks to the use of two saw arbors and an advanced feed system, it ensures stable material guidance and high quality of the processed components. TECHNICAL DATA: * Manufacturer: WALTER * Model: WD 250/350 * Type: Twin-spindle multi-blade saw Processing parameters: * Maximum cutting height: 170 mm * Maximum cutting width: 350 mm * Diameter of saw blades: 300 mm * Spindle diameter: 2 × 70 mm Drives: * Lower spindle motor: 30 kW * Upper spindle motor: 37 kW * Feed motor: 1.5 kW Feed system: * 7 lower pull rollers * 2 upper toothed pull rollers * Length of infeed table: 3000 mm Chip extraction: * Extraction nozzles: 2 × 200 mm MACHINE DIMENSIONS: * Length: 3200 mm * Width: 2000 mm * Height: 2000 mm * Weight: 2000 kg Machine advantages: * Very good, excellent technical condition * Powerful 30 kW and 37 kW motors * Stable, heavy-duty industrial construction * High production capacity * Precise material guidance * Advanced feed system ensuring smooth operation * Ready for immediate start-up * Excellent for sawmills and wooden component manufacturing plants Credpfx Apozru Azjtsg The machine has been regularly serviced and maintained in very good technical condition. It is ready for immediate use.

Condition: good (used), Year of construction: 2005, functionality: fully functional, CNC machining center Walter Helitronic Vision - Year of manufacture: 2005 - Control system: HMC600 i7 panel with Tool Studio 3.3 - Pallet loader - Grinding spindle motor power: 24 kW Cedpjzu Iylsfx Aptsrg

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: Cedpfxex Dkyyj Apterg - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: used, Year of construction: 2018, Suitable for regrinding and production of wood and metalworking tools of all kinds. Accessories: Total enclosure Fanuc robot loader with 6 controlled axes and camera system Software Toolstudio Standard & Advanced Version 3 Software Helitronic Toolstudio Option Step Tools/Drills Automatic fire extinguishing system Drive chiller for all drives Measuring probe Oil drip tray Glass scales on the linear axes Electrostatic mist collector Pneumatic workpiece clamping Automatic, hydraulically actuated steady rest Measuring mandrel ISO 50 3 grinding wheel adaptors Longitudinal movement (X-axis): 400 mm autom. X‘-axis for moving the workpiece carrier: 110 mm Vertical movement (Y-axis): 320 mm Transverse movement (Z-axis): 320 mm Rotary table swivel range (C-axis): - 110 ° - + / 160 ° Swivel range B-axis (grinding head): +/- 20 ° Cedpfjzdc Rlex Aptjrg Workpiece carrier (A-axis): ISO 40 Speed ​​range: 0-1000 rpm Workpiece diameter in production: 0.1 - 12.7 mm Workpiece diameter in resharpening mode: 2 - 12.7 mm Max. Workpiece length: 120 mm Cutting length: 70 mm Drive power grinding spindle 1:: 5 kW Drive power grinding spindle 2:: 1,5 kW Drive power grinding spindle 3:: 1,5 kW Grinding spindle speed stepless: 0-10,000 rpm. Connected load: 18 kW (400 V / 50 Hz) mass: about 6000 kg Dimensions W x D x H =: 2385 x 2200 x 2006 mm colour: colour white RAL 9003 / iron grey RAL 7011

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material. Crsdpfx Ajh R Tvtepteg

Condition: excellent (used), Walter+Bai LFV100-HH Servo-hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including the PAC-40 hydraulic unit, PCS8000 digital controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial manufacturing. The original Walter+Bai testing software, the associated software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K29788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Control System: Walter+Bai PCS8000 Digital Controller Digital Testing Machine Control System Original Walter+Bai Testing Software Available Original Software Dongle Available Industrial PC Included in Scope of Delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic Hydraulic Unit Water-cooled Version Designed for Continuous Operation PCS8000 Digital Controller Mounted Dimensions: Testing Machine (W × D × H): approx. 1,200 × 1,245 × 3,378 mm Hydraulic Unit PAC-40 (W × D × H): approx. 800 × 1,250 × 1,650 mm Weight: Testing Machine: approx. 2,500 kg Hydraulic Unit PAC-40: approx. 980 kg Clamping System: Codpjzlz Rxofx Apterg 2 × Mechanical Wedge Grips Walter+Bai WGR-100-M Several Sets of Gripping Jaws Clamping and Mounting Accessories as Shown in Pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Several Sets of Gripping Jaws Handheld Control Unit Separate Control Unit with Emergency Stop Testing and Mounting Accessories as Shown in Pictures Condition: Used Year of Manufacture 2019 Optical Condition as Shown in Pictures Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Sets of Gripping Jaws Handheld Control Unit Control Unit Other Accessories as Shown in Pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: ready for operation (used), Walter Fielenbach - Centrifuge F25 -Payload: 25 kg -Drum volume: 35 liters -Drum wall: 3 mm steel -Speed: 980 rpm -Motor power: 4.5 kW -Drive power: 1.5 hp -Material: SM steel Dimensions: L x W x H 0.9 x 0.9 x 1.2 meters / Weight 300 kg Errors and omissions excepted. Codezta U Sjpfx Aptorg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 693068, overall weight: 7,300 kg, power: 30 kW (40.79 HP), Walter Helitronic Vision CNC Tool & Cutter Grinder with Pallet Loader Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Vision, s/n 693068, year 2008 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Can be viewed under power. Specifications: • Longitudinal movement (X-axis) 480 mm • Y axis vertical movement 320 mm • Z-axis transverse movement 700 mm • Rotary table swivel range C-axis +/- 200 ° • Workpiece Holder ISO 50 • Max. Workpiece diameter 320 mm • Workpiece length circumferential grinding 370 mm • Workpiece length for face machining 320 mm • Accuracy linear resolution 0.0001 mm • Radial resolution 0.0001 ° Codpfx Apjuqzdpetjrg • Diameter of the spindle 100 mm • Grinding wheel mount: HSK50 • Diameter of the grinding wheel 200 mm • Grinding spindle speed 0 – 12,000 rpm., • Top performance 30 kW • Connected load 35 kW (460 V / 60 Hz) • Weight approx. 7,100 kg • Dimensions L x W x H 3649 x 2490 x 2301 mm Accessories: • Does not include wheel opening stick fixture seen in the pictures • Stepless speed control, probe, pneumatic workpiece clamping • Electrostatic mist extractor • Fire extinguishing system • Oil collecting pan, 2 grinding wheel flanges, Complete set of Manuals • Turmoil Drive Chiller • Loader Pallets: 8pcs – 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1-1/4” • 10pcs - HSK Wheel Arbors Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • The computer was upgraded & is very fast rendering tools in Tool Studio Condition: • Excellent condition, very accurate & consistent. October 2023 Y axis Complete rebuilt, Linear motor, rails, Compensation Cylinder, Festo Booster Pump done by United Grinding. • 1 Micron Filtration system was used on the machine (not included), so it’s been kept extremely clean • We can load onto a flatdeck for shipping for $1200. We can also provide shipping quotes if you would like & crating for Sea Freight shipping.