Used Walter for sale (68)

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Iiodpfx Ajx Hhxhsc Ask Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm Ijdpfx Acomv Elpe Aoik dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm Iedpfx Acjb A I E Rj Aeik -Height: 170 mm -Center bore: Ø 48 mm -Weight: 150 kg

Condition: used, Year of construction: 1997, Description: Suitable for regrinding and manufacturing new wooden and metalworking tools of all kinds. Accessories: Software Package 1 (cylindrical tools sharp-edged, corner and full radius), Software Package 2 (conical-spiral tools sharp-edged, corner and full radius), Software Package 3 (drills and step drills), Software Package 4 (step tools) Software Package 6 (woodworking tools), Software Package 16 (warming-up program), Software Package 27 (free programming), Heli-Flute & Cone (flute calculation program for cylindrical and conical mills), stepless speed control, pneumatic workpiece clamping, Probe, automatic fire protection system, electrostatic extraction, oil collection tray, automatic central lubrication, 2 grinding wheel mounts. X axis longitudinal movement: 400 mm Y - axis vertical movement: 250 mm Z-axis cross movement: 580 mm C-axis rotary table: Swivel range +/- 200 ° Workpiece holder: ISO 50 max. workpiece length: 270 mm Iodpfx Ajx H Nqloc Ajik max. grinding wheel diameter: 200 mm, Max. Workpiece diameter: 260 mm Grinding spindle speed infinitely variable: 0 - 9500 rpm. weight: approx. 3200 kg Drive power grinding spindle: 10,0 kW Connected load: 15 kVA (400 V / 50 Hz) Dimensions W x D x H: 2000 x 2010 x 2150 mm colour: grey RAL 7035/7043

Condition: used, Year of construction: 1996, functionality: fully functional, spindle speed (min.): 10,000 rpm, power: 12 kW (16.32 HP), warranty duration: 3 months, Our machine is well maintained and fully functional. Installation and Training will be provided by our company. The machine has a 3-year warranty after installation. Please contact us for price and details. Iiedpfx Acjwiztqj Ajk

Condition: excellent (used), Year of construction: 2001, Fast axis .machine in very good condition Iedpfxsrmlwhs Ac Aeik

Condition: excellent (used), CATALOG NUMBER 7846 TECHNICAL DATA - minimum width of central prism after cutting: 85 mm - minimum length of cut log: 1300 mm - maximum diameter of cut log: 350 mm - shaft diameter: 70 mm - circular saw blade diameter: 500 mm - maximum number of circular saw blades on upper and lower spindle: 4 pcs each - 2 feed speeds + forward/reverse + inverter control - drive motor power (lower spindle): 22.5 kW - drive motor power (upper spindle): 18.5 kW - feed drive motor power: 1.1 kW Iiodox Hhw Ropfx Ac Aek - track length: 4450 mm - extraction outlet diameter: 3 x 200 mm - 3 rows of detents - dimensions (L/W/H): 6040x1500x1850 mm - weight approx. 1250 kg ADVANTAGES – Made in Poland, WALTER brand – Complete operating documentation (DTR) – Used machine, in very good condition Net price: PLN 36,900 Net price: EUR 8,790 Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2020, functionality: fully functional, cutting height (max.): 150 mm, saw blade diameter: 425 mm, cutting width (max.): 600 mm, chain width: 600 mm, type of input current: three-phase, input voltage: 400 V, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Iiedpfx Aox Dkyysc Aok Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 Iiedpfsb A Rk Isx Ac Aek -Weight: 14 kg

Condition: ready for operation (used), Panning machine, Coating pan machine,Pralines and Drages, Used Machine Manufacturer: Walter Brucks Type: I Overall dimensions: 1200 x 1380 x 1800 mm Weight: 280 kg Electrical data: 400 V, 3 A Pan size: 1200 mm Ø x 650 mm Pan opening: 740 mm Ø Isdpfxjw I Sbbj Ac Asik Capacity / mixing: approx. 150 kg

Condition: excellent (used), Year of construction: 2015, CNC tool grinding machine Walter Helitronic Power FH, with pallet loader (cylindrical), 8-position disc changer, electrostatic fume extractor, fire extinguishing system, oil supply pump, software Walter-Window-Mode and Toolstudio. Software packages: 001, 002, 003, 016, 017, 026, 090, 091, 098, 099, 032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard. Equipped with hydraulic interface (preparation for steady rest - Lynette). Iiedjx E Dfbjpfx Ac Aok The grinding spindle (single spindle) is direct-drive and features an oil cooler. The hollow-shaft motor for the A-axis has a speed range of 0–750 rpm. Axes C, X, Z, and A were overhauled in 2022.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Sharpening machine for diamond and carbide tools. Equipped with EDM system and grinding wheels. Automated 8-station grinding wheel/electrode change magazine. HSK50A grinding wheel/electrode holder spindle. HSK63F workpiece-holding spindle. The machine is equipped with tool software from Walter's "Tool Studio" mechanics and tool sharpening software for the woodworking industry. 5-axis machining (CNC). Fanuc control. Equipped with a tank with pump. Elbaron fume filter. Iedpfotrld Nox Ac Asik Max. tool machining diameter: 320mm Max. tool weight. : 50kg Grinding wheel diameter: 200mm Electrode diameter: 6mm - 200mm ROBOT NOT INCLUDED IN THE PRICE.

Condition: excellent (used), CATALOGUE NUMBER 7848 TECHNICAL DATA - Minimum width of the central prism after cutting: 70 mm - Minimum length of the cut log: 1300 mm - Maximum diameter of the cut log: 350 mm - Shaft diameter: 70 mm - Circular saw blade diameter: 500 mm - 2 feed speed options + forward/reverse + inverter control - Maximum number of saw blades on the upper and lower spindle: 4 pcs each - Lower spindle drive motor power: 22 kW - Upper spindle drive motor power: 18.5 kW - Feed drive motor power: 1.5 kW - Track length: 4450 mm - Additional track extension: 3000 mm - Overall dimension of the additional extension: 3700 x 520 x 950 mm - Extraction outlet diameter: 3 x 200 mm - 3 rows of pawls before the blades - 1 row of pawls after the blades - Dimensions (L/W/H): 6010 x 1500 x 2000 mm Iiodpfxjx E Shwo Ac Aek - Weight: approx. 1400 kg ADVANTAGES - Polish manufacture, WALTER brand - Additional 3000 mm track extension - DTR documentation – used machine, very good condition Net price: 37,900 PLN Net price: 9,020 EUR based on the exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Iijdpfx Ajv Srfdoc Ask Good condition

Condition: good (used), End mill, end mill, milling cutter, indexable inserts Iiedpfjb A R E Uox Ac Aok -Outer diameter: 50 mm -Teeth: 4 -Weight: 0.5 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, total height: 245 mm, total length: 211 mm, total width: 212 mm, spindle speed (max.): 5,000 rpm, feed length X-axis: 650 mm, feed length Y-axis: 350 mm, feed length Z-axis: 720 mm, grinding wheel diameter: 250 mm, overall weight: 5,000 kg, Machine has only run with oil cooling, machine is equipped with dressing roller, measuring probe, pneumatic workpiece clamping, -- New linear guides and control conversion in 2014 Iijdpfxoug H R Ss Ac Aek

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: Iedomv Ekyopfx Ac Aeik main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: reconditioned (used), This is a Helitronic Vision CNC Tool and Cutter Grinding machine. The machine comes complete with Magnet filter separator and Transor filter system. It is HMC 600 control with Tool Studio 2.1 and Tool studio option step tool as well as WWM. It has electro static mist extraction and Kraft and Beyer fire extinguisher system. It also has Forflift loading system and Hydraulic Tail Stock. The machine will be fully cleaned and serviced. Iedpev Aba Ejfx Ac Ajik

Condition: refurbished (used), End mill, flute cutters, Corner milling cutter Make Walter type prototype P 31 23017-20 shank diameter 20 mm Ijdpfx Acsiuh E Is Aeik cutting diameter approx.19 mm cutting length 38 mm freshly ground and coated Material HSS Co

Condition: excellent (used), Feeding table 6 m stepless saw spacing adjustment, variable feed speed, 2x long-body motors, each 3.5 kW. Maximum workpiece width: 700 mm Maximum cutting width: 460 mm Iisdpoxz Umxofx Ac Ask Maximum cutting height: 140 mm Minimum workpiece width: 70 mm

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool Iiodpfx Aceb A Rcfs Ask -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm -Weight: 0.75 kg

Condition: used, Year of construction: 1975, functionality: fully functional, load capacity: 40,000 kg, Equipment: foot remote control, Container Rotator 40 t – Used for Sale Year of manufacture: 1975 Load capacity: 40,000 kg (40 t) Condition: Good mechanical condition, regularly maintained Modernization: Completely retrofitted with modern drive technology Iiodpfjx Dbifsx Ac Aok Technical Description The offered container rotator is suitable for the safe rotation and positioning of pressure vessels, apparatus, tanks, and large welded assemblies up to a total weight of 40 tonnes. The unit has been fully modernized and equipped with the following technology: * New electric motor (industrial grade) * Frequency inverter control (VFD) for regulation: - Infinitely variable rotation speed - Smooth start/stop operation - Fast and safe change of rotational direction - Optimized energy efficiency and enhanced operational safety * Mechanicals: robust steel frame construction, large support and running surfaces Suitable for round components, containers, boilers, cylinders, and welded structures Advantages - Very robust mechanically, designed for continuous operation - With new motor/VFD technology, technically up to date - Easy operation and precise speed control - Ideal for welding shops, apparatus construction, and pressure vessel manufacturing Availability Immediately available Inspection possible by arrangement

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 - Polish production Iodoh Dwmlepfx Ac Ajik - DTR, CE - year of production 2011 TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2065-6183 FH, total height: 2,828 mm, total length: 2,930 mm, total width: 3,615 mm, workpiece weight (max.): 50 kg, spindle speed (max.): 10,500 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 750 mm, type of input current: AC, grinding wheel diameter: 150 mm, overall weight: 6,550 kg, grinding length: 400 mm, rotational speed (max.): 9,500 rpm, grinding spindle speed: 10,000 rpm, pivoting range: 200 °, travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 11,500 W, power: 11.5 kW (15.64 HP), workpiece diameter (max.): 320 mm, input current: 25 A, grinding diameter: 240 mm, input frequency: 50 Hz, disc diameter: 200 mm, input voltage: 400 V, space requirement width: 3,615 mm, space requirement length: 3,850 mm, space requirement height: 2,828 mm, year of last overhaul: 2022, Equipment: rotational speed infinitely variable, CNC tool grinding machine Walter Helitronic Power FH, with cylindrical pallet loader, with 8-position wheel changer, with electrostatic mist collector, with fire extinguishing system, with oil supply pump, Walter Window Mode and Toolstudio software, Software Packages: 001,002,003,016,017,026,090,091,098,099,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, prepared for hydraulic unit (steadies). Iijdpfsx D Tm Aex Ac Aok The grinding spindle (single spindle) is directly driven and equipped with an oil cooler. The hollow-shaft motor on the A-axis operates at 0-750 rpm. The C, X, Z, and A axes were overhauled in 2022. Test grinding is possible.

Condition: good (used), Execution : . - Clamping surface D = 400 mm - Overall height 196 mm - . Iedpox Au Tzjfx Ac Asik - 3-jaw chuck TOS , D = 250 mm , very good condition .