Used Kaeser Omega 42P for sale (456)

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 29,000 mm, loading space width: 2,540 mm, loading space height: 2,850 mm, total length: 29,000 mm, total width: 2,540 mm, total height: 2,850 mm, suspension: air, tire size: 385/65-R22.5, Year of construction: 2026, Equipment: ABS, - BPW axles - EBS - Air suspension - Disc brakes - Central lubrication system NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical data MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: Goodyear) Tire pressure monitoring system (TPMS): TPMS according to ECE R 141 Axles: BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0) Dcodezhxgispfx Ai Son Braking system: WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-quality fine-grain steel. Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Warning signs: Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options: • Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor) • Electro-hydraulic unit (approx. 45 kg) • 2 wheel chocks with holder on the partition wall • Kingpin 2" • Galvanized steel partition, approx. 1600 mm high. EN12642-XL • White reflector tape according to EU regulations over the entire length and width. Red at the rear. • EU marking plates (red-yellow) at the rear of the vehicle. • Holder for a rotating beacon at the rear of the vehicle. • Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg). • 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor. • 1 spare wheel holder under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps. • 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container. • 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm • Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm) • Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor • Ladder, mounted on the left in the direction of travel • Stainless steel toolbox • LED lighting • 10 pairs of twist locks (100 x 50 mm, length 1000 mm) • 8 container General information Year of manufacture: 2026...

Condition: excellent (used), 4000 pcs production boards Mywood 1400x1150x50 - out of production March 2026 Dcjdpfx Aioyftzds Sen - price: 15 euro pcs

Condition: excellent (used), Complete production line ZENITH 844 AZ. Consist off: Dcjdpfxsy E Nd Nj Ai Son - block making machine Zenith 844 AZ with face mix - packing station with trapping device horizontal - 10 moulds - 200 steel production boards Very good condition. Still in production

Condition: used, -Dimensions (LxWxH): 1420x2200x2200 mm -Serial number: 8801680 -Reference number: 7367165 Dedpfsy Icknox Ai Sjcn -Baking surface: 5.3 m² -Stone slab dimensions: 801x1230 mm -Year: 2005 -Number of decks: 5 -Maximum temperature: 300°C -Voltage: 400V -Heating power: 53.6 kW -Weight: 1064 kg -Refurbished equipment: Equipment is prepared upon order; lead and turnaround times are specified at that moment (please request pricing after refurbishment) -Front panel with brushed stainless steel extraction hood -Heavy refractory cement baking soles, 20 mm thick -Stainless steel armoured electric heating elements -1 independent pressure relief damper per deck -1 independent steam generator per deck -Glazing treated to reduce heat loss -Steam system and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels -Electrical bundles with high-temperature silicone cables

Condition: used, mileage: 5,10,274 km, power: 353 kW (479.95 HP), first registration: 03/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: blue, gearing type: mechanical, emission class: euro5, total length: 10,550 mm, total width: 2,550 mm, total height: 3,980 mm, loading space volume: 34 m³, Year of construction: 2012, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, MAN TGS 35.480 8x2-4BL Silo Truck for Pellets (Heitling Silo, Year 2012) Description: For sale is a reliable and well-equipped MAN TGS 35.480 8x2-4BL with a Heitling silo body (built in 2012), specifically designed for the transport of wood pellets, including hoses and a vacuum cleaner (see pictures of the storage box for accessories). The vehicle is in operational condition and has a valid main inspection (TÜV until 04/2027), and the calibration is valid until 31.12.2027. Vehicle Data & Highlights: Manufacturer & Type: MAN TGS 35.480 8x2-4BL * First Registration: 07.03.2012 * Mileage: approx. 510,274 km * Engine: D 2676 LF18 (12,419 ccm, 353 kW / 480 hp) * Emission Class: Euro 5 EEV * Transmission: Manual transmission * Axles: 4-axle chassis (leaf/air suspension), 4th axle designed as a lift and steer axle * Wheelbase: 5.20 m * Tires: 315/80 R22.5 (tread depths: Axle 1: 30/40, Axle 2: 20/30, Axle 3: 40/30, Axle 4: 30/20) Weights & Payload: Permissible Total Weight: 32,000 kg * Unladen Weight: 12,860 kg * Payload: 19,140 kg Body & Technology: Silo body for pellets, 34,000 liters (Heitling Silo, Year 2012) * including hoses * 4 equally sized chambers = a total of 34 m³ * Weighing system * Calibration valid until 31.12.2027 * Hydraulic system for compressor * Kaeser Compressor Rotary Blower Omega 52 Plus * Continuous brake: Intarder Cab & Equipment (LX Cab): * Air Conditioning: Automatic climate control * Comfort: Auxiliary heater, refrigerator, 1 bed * Assistance Systems: Cruise control, reversing camera, ABS * Entertainment & Radio: CD radio, CB radio * Exterior Features: Alloy wheels, 2 storage boxes * Color: Blue Inspections & Certificates: TÜV valid until: 04/2027 * SP valid until: 10/2026 ---- The vehicle is available immediately. If you are interested or have questions regarding a viewing, we look forward to hearing from you! Dcodpoz Emh Hofx Ai Sen New main inspections / safety inspections or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Through our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you load your purchased vehicles. Organization of special transports We will gladly help you organize special transports. Day license plates / export license plates We will gladly help you obtain export license plates/short-term license plates.

Condition: as good as new (ex-display), Year of construction: 2026, max. workpiece length 4400 mm profile spindle 1 Stück main drive 19,2 kW Control Beckhoff CNC machining center MASTERWOOD 4 WIN ----- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Different tool magazines for optimal tool loading - Simultaneous loading of 4 workpieces - Patented clamping system for optimal processing of the workpieces - CNC controlled work table with automatic positioning of beams and Stretcher - Automatic re-clamping for changing between external and internal profiling - INTEGRATED window construction software, i.e. the machine does not have to (but can of course) can be controlled from the office with external industry software. - strong motor with 19.2 kW HSK-63 E Dodpfx Asyyqm Usi Sscn Please note that this stock machine is with us in Oberkochen and is already equipped with many useful options. Tools available at short notice on request! Request an offer and see for yourself unbeatable value for money! VIDEO of the machine on request! Below you will find the technical Description of the machine as a PDF document. We would be happy to sell your used machine to a pay a reasonable price! Suitable stationary or mobile suction on request! (see e.g. #5674 NESTRO NE 300) Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (technical information according to the manufacturer - without guarantee!)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,480 mm, loading space height: 3,040 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis Steel welded construction with narrow crossmember spacing and reinforced design, low-loader outer frame profile, for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2550 mm, kingpin plate with replaceable 2 kingpins. Rear slope of approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/diamond plate, in the low-bed, omega rail laterally at the bottom on the outer frame as a mounting rail for tarpaulin and spacers for lashing points, not in the wheel area. If a lift table is used, there is an additional, lightweight outer frame with an omega profile. 24-ton, 2-speed landing gear, single-sided operation, with a semi-circular lower part and a straight connection plate, with stroke compensation, free swivel radius to the rear approx.: 1950 mm, rear support, foldable 2 wheel chocks + holder Side underrun protection, aluminum Quarter panel fenders in front of and behind each axle with anti-splash flaps behind each axle Underrun protection, steel Splash flap at the rear over the entire width 4 storage boxes, stainless steel, w=800/h=350/d=350 mm, with a polished, lockable door, 2 x on the left front and 2 x on the right front in front of the 1st axle Lift table behind the gooseneck, approx. 3000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right front + additional activation with a wireless remote control, lift table can be raised with the tarpaulin closed! Tarpaulin attachment in the lift table area to an additional, lightweight outer frame with omega profile, lift table can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame 2 pairs of lashing points at the top and on the side embedded in the outer frame 8 pairs of lashing points at the top and on the side embedded in the outer frame, each 10 tons 9 pairs of 5-ton lashing points embedded in the outer frame Axles + Suspension SAF drum brake axles last axle with trailing steering knuckle, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lifting and lowering valve + auto-reset function H&S function with quick vent 1st axle, automatic lift axle, incl. forced lowering and starting assist, activated by pressing the brake pedal 3 times (starting assist is functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Axle lift below the recommended ride height, no guarantee for tire damage Wheels and tires 235/75R17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring brake parking brake 2 foolproof coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load recognition in the truck via EBS, without installation in the truck. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Dcedpfsi Riw Asx Ai Sen 2 white

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: black, Attention: The pictures shown are archive images. The vehicle may still be in operation! Chassis Fine-grain steel welded chassis with lightweight design, equipped with a replaceable 2" kingpin. Slightly angled outer frame with Load-Lock profile for load strap attachment. Note: When sideboards are fitted, they must be opened before straps can be attached. Not usable in the gooseneck area. Additional 10 pairs of recessed lashing rings, each rated at 2.5 t. 24-tonne two-speed landing gear with single-side operation and straight foot, without compensating mechanism. Foldable front support legs, extendable and foldable outward in front of the headboard; positioned as far inward as possible during transport. Rear access ladder, side-mounted door retainers, wheel chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter fenders in front of the first axle and behind each axle, anti-spray mudflaps behind each axle, rear impact protection with Heavy Blocker cross beam, heavy-duty pallet stop on both sides (approx. 20–25 mm high) with lashing points every 200 mm. Loading height reduced by approx. 20–25 mm. Plastic toolbox. Axles & Suspension SAF disc brake axles with air suspension, without lift axle. Braking System Dual-line air brake system with spring parking brake. Two colour-coded coupling heads at the front without connecting lines. Electronic Braking System (EBS) with front EBS socket (without connecting cable). Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. Equipped with raise/lower valve and Vehicle Stability System (RSS). Electrical System 24 V electrical system with multi-chamber lights, yellow LED side marker lights, two white LED front position lights, two red/white rear outline marker lights, and 2 × 7-pin plus 1 × 15-pin front sockets (without connecting cables). Floor Steel front floor section with anti-slip coating. Approx. 30 mm phenolic plywood floor, Omega-reinforced cross joints, longitudinal support beams for high point loading, suitable for forklift axle loads up to 7,100 kg. Steel chequer plate flooring in the wheel area. Dedokyrlwjpfx Ai Sscn Front Wall Front bulkhead approx. 2,580 mm high with steel corner posts in volume design. Front curtain release mechanism. Internal steel impact protection up to approx. 140 mm height. Sliding Posts Three pairs of full-length sliding posts with four socket positions and extended lower pockets. Three post positions with aluminium side slats. Rear Frame Steel rear corner posts extending to roof level, curtain tensioning system with round tube and ratchet. Double rear portal doors with two internal locking rods per door. Curtain PVC curtain with welded horizontal and vertical reinforcement straps, stainless steel tension buckles, and customer branding on the rear portal. Roof Sliding roof with rear end-lift, opening from rear to front. L-roof beams suitable for automotive logistics. Internal roof width approx. 2,490 mm. White roof curtain. EcoLift lifting roof, adjustable by approx. 380 mm with gas strut assistance. Anti-Ice System with centrally positioned hose and automatic ventilation. Registration & Certification Approved for registration in Germany, type-approved according to EC Directive 2007/46. EN 12642 XL load securing certificate (valid only with four rows of aluminium side slats), additional DC 9.5 certificate

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33502014693, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r19,5, tire condition: 100 %, Further information: Djdpfx Ajkyrlzoi Secn Fine-grained steel welded construction, drawbar with 2 replaceable kingpins, 14 pairs of lashing eyes recessed in the outer frame, each with a capacity of 2.5 tons, outer frame with Load-Lock profile for attaching lashing straps. Note: Not suitable for use with sideboards! 24-ton, two-stage support winch, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation. 2-stage extension ladder at the rear, door retainer on the side, chocks with holder, aluminum side impact protection, galvanized steel underrun protection, partial wheel arches in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, spare wheel holder for 1 spare wheel, with wheel fastening kit, plastic toolbox. SAF disc brake axles, air suspension. 2-line compressed air braking system, spring brake parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, vehicle stability system, tire pressure monitoring system TPMS Haldex, in conjunction with the info center. 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole tamper-proof sockets at the front, without connecting cable, LED safelight, at the top in corner posts at the rear. Floor: Sieve-printed panels approx. 30 mm thick, cross members with omega inserts, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,600 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side rails: 5 pieces of sliding rails that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket (3 x on the right side and 2 x on the left side), 5 pieces of rail positions (3 x on the right side and 2 x on the left side), aluminum insertion strips. Corner posts at the rear: steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-wing with 2 internal rotary latch locks each. Tarpaulin with welded-in horizontal and vertical straps, reinforcements for side rails. Quick Lock system for side tarpaulin with central lock, on one side on the left, tensioning devices made of stainless steel on the right, tarpaulin with recessed vertical slats as a load securing tarpaulin, on one side on the left (then only 2 pairs of side rails on the left). Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with the tarpaulin sliding from the back to the front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, liftable roof, mechanically liftable by approx. 380 mm, liftable roof for opening with the doors closed. Country of registration: Germany, type approval according to EG 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, prepared for single-line license plate holder, warning sign according to ECE - 70, refl

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23002022053, empty load weight: 5,760 kg, maximum load weight: 23,240 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 10/2017, loading space length: 14,900 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 70 %, color: black, Please note: the pictures are archive images. The vehicle may currently be in use. # Chassis – semi-trailer for general haulage - Fine-grain steel welded construction - Upper coupler plate with replaceable 2" kingpin - Outer frame slightly inclined, with "Load-Lock" profile for attaching lashing straps - 24 t 2-speed landing gear, one-side operation, semi-round feet and straight mounting plate, with movable thrust compensation - Folding rear support - Pull-out ladder at rear - Door retainers on sides - Wheel chocks with holders - Aluminium side underrun protection - Galvanised steel rear underrun protection - Quarter mudguards in front of and behind axle assembly - Rear corner impact protection - Ferry lashing eyes - Pallet stops on both sides, approx. 15-20 mm high, bolted; loading height reduced by approx. 15-20 mm - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm # Axles + suspension - SAF disc brake axles, 430 mm disc diameter - Axles/running gear laser-aligned: reduced tyre wear and fuel consumption - Air suspension - No lift axle # Braking system - Dual-line compressed air braking system - Spring brake parking brake - 2 polarity-protected coupling heads at front, without connecting hoses - EBS (electronic braking system) with EBS socket at front, without connecting cable - Raise/lower valve - Roll stability system - Axle load detection via EBS CAN bus signal for display in driver's cab; tractor unit must be prepared accordingly, no installation on the tractor unit (not a calibrated scale) # Wheels and tyres - 385/65 R22.5, brand at manufacturer's discretion - Steel rims, factory silver # Electrics - 24 V - LED multi-chamber lamps with resistor - Yellow LED side marker lights - LED number plate lighting - 2 white LED front position lights Dcodpfxjz Egqzs Ai Sen - 2 white/red LED rear outline marker lights - 2 x 7-pin and 1 x 15-pin polarity-protected sockets at front, without connecting cables - Additional LED work light at rear, switched via reversing light - Reversing camera system with colour flat-screen monitor, wireless connection to screen, suction-cup mount, power supply via 24 V vehicle socket # Floor - Phenolic-coated plywood approx. 30 mm, transverse joints with omega inserts - On longitudinal bearers for high point loads, forklift axle load up to max. 7100 kg # Headboard/front corner posts - Height 2 580 mm - Reinforced steel corner posts - Side curtain release device at headboard - "Crash-Blocker", inside at bottom at approx. 140 mm height with steel impact protection # Rear frame/rear corner posts - Rear steel corner posts up to roof underside - Curtain attachment with round tube and curtain tensioning ratchet - Rear portal doors, 2-leaf, each with 2 internal locking bars # Curtain - Curtain with welded-in horizontal and vertical straps - Stainless steel tensioning buckles - Customer lettering on side curtains and rear portal # Roof - Sliding roof, slides from rear to front; rear roof lift folds upwards - L-shaped roof rail for automotive industry, internal width between roof rails approx. 2 490 mm - EcoLift lifting roof, raisable by approx. 380 mm on both sides, gas strut assisted - Optimised rain gutter at rear, on top of rear roof bow above doors Please note: archive images!

Condition: new, Year of construction: 2026, SUPERTOOTH jaw plate set for Pegson XA400S / XR400S and Powerscreen 400 / R400 This listing is for a complete set of SUPERTOOTH-profile jaw plates. The set is suitable for the following jaw crusher models: Pegson XA400S Pegson XR400S Powerscreen 400 Powerscreen R400 The set consists of: Fixed jaw plate — part number CR005-068-001C, weight 1000 kg. Dedpfxoz Dudyo Ai Socn Swing jaw plate — part number CR005-067-001C, weight 1100 kg. Material composition: 18% manganese, 2% chromium, balance iron. The chemical composition has been verified using a spectrometer. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, Mantle and bowl liner set for Metso HP200 STD This listing is for a complete set of wear cones for the Metso HP200 STD cone crusher. The set consists of: Bowl liner (outer cone) — part number N55208134-22, weight 550 kg. Mantle (inner cone) — part number N55308011-22, weight 482 kg. Dsdpfx Aiez Dulws Sjcn Material composition: 22% manganese, 2% chromium, balance iron. The components are manufactured from castings of the highest quality available on the market. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, Jaw plate set for Metso LT95 / C95 — large tooth, new type This listing is for a complete set of jaw plates for the Metso LT95 / C95 jaw crusher. The jaw plates feature a large-tooth profile and are manufactured in the new design. The set consists of: Fixed jaw plate — weight 868 kg. Swing jaw plate — weight 710 kg. Material composition: 18% manganese, 2% chromium, balance iron. Dcedpjz Durkjfx Ai Sen Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: used, -Dimensions: 1420x2600x2200mm -Stone size: 801x1630mm -Model: Omega5.163 -5 decks -Serial number: 8118337 -Year: 2003 -Baking surface: 6.6m² -Temperature: 300°C -Voltage: 400V -Power: 30kW Djdpfx Aijy H Ebmo Sjcn -Weight: 1800kg -Refurbished equipment: The equipment is prepared upon order; lead times for collection and return are agreed upon at the time of ordering (please request the price after revision) -Front with brushed stainless steel hood -Solid refractory cement baking stones, 20mm thick -Stainless steel armoured electric heating elements -1 independent pressure relief valve per deck -1 independent steam generator per deck -Treated glazing to reduce heat loss -Steam unit and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels -Wiring looms made of high-temperature silicone cables

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) Dcodpfxszcaufs Ai Sen - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: used, mileage: 5,99,852 km, power: 320 kW (435.08 HP), first registration: 07/2014, fuel type: diesel, empty load weight: 11,880 kg, maximum load weight: 14,120 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: other, emission class: euro5, suspension: air, number of seats: 2, loading space volume: 28 m³, Equipment: ABS, air conditioning, cabin, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, * German vehicle * 1st hand * Serviced checkbook * Condition see photos * Complete documentation available * 4-chamber special silo with 28m³ * from year of construction 2014 * from premium manufacturer Tropper * Type TN28/ 4AL * With Tropper scale and receipt printer * Superstructure with radio remote control + weight display Dedpfx Asvhp Emoi Sjcn * External boiler inspection 3-2025 * Internal tank inspection 3-2028 * Tank diameter 2,400 mm * Operating pressure 1 bar * 2 x 4 hose pipe covers with end plates and doors * 8 delivery hoses NW 100 * Filling sliding cover NW 450 * 4 discharge bowls * Conveying system Tropper Airblock * Rotary piston compressor Kaeser * Air volume up to 28m³/h * Access ladder * Pneumatic folding safety railing * Safety walkway * Anti-dust monitoring with remote control * Mobile extraction unit with blower, toolbox and extraction hose * XXL comfort cab * 1 bed * Air conditioning * Auxiliary heating * Refrigerator * Retarder * Cruise control * Multifunction steering wheel * Bi-xenon headlights * Alcoa alloy wheels * Electric windows * Heated electric mirrors * Air-sprung comfort driver's seat * Heated seats * Electric roof hatch * Trailer coupling * Trailer load 18,000 kg. * Gross towing weight 44,000 kg. * Air suspension + raise/lower * Liftable trailing steering axle * Wheelbase 4.90 m + 1.40 m * GVW 26,000 kg. * GVW. 27,000 kg technically possible * Unladen weight 11,880 kg * Payload 14,120 kg If new TÜV approval is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 59900 € 1132.11 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm 3800 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN Dcjdpfx Aowiq E Nsi Son - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Year of construction: 2018, condition: used, Compressor design: screw compressor Pressure: 10 bar Volumetric flow rate: 1080 l/min Dcjdpfx Asx Hwq Hsi Son Condensate drain: automatic Weight (approx.): 240 kg Motor power: 7.5 kW Electrical connection (approx.): 400 V Workshop overhauled: new filters, oil change, etc. Location: customer

Year of construction: 2023, condition: ready for operation (used), A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible. Dodpjzhw Tzofx Ai Socn

Condition: used, Year of construction: 2006, Zum Verkauf steht ein Posten pneumatischer Ventile und Antriebe des Herstellers Festo. Gesamtmenge: 42 Stück – 28 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – 14 Einheiten: pneumatische Antriebe / Komponenten Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Industrieautomation – Lebensmittel- und Getränkeindustrie – Chemische Industrie – Wasser- und Prozesstechnik – Wartung und Ersatzteile Neupreis vergleichbarer Festo Einheiten: ca. 150–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 2.900 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: lot of pneumatic valves and actuators by Festo Total quantity: 42 units – 28 complete units with stainless steel ball valves – 14 units: pneumatic actuators / spare components The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – industrial automation – food & beverage processing – chemical industry – water treatment and process systems – maintenance and spare parts supply Estimated new price of comparable Festo units: approx. 150–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Price: 2,900 € negotiable Location: Slovakia (EU) Dcodpfx Aoyxqluoi Son Worldwide shipping possible

Year of construction: 2023, condition: used, functionality: fully functional, For sale: 300-liter vacuum concentrator – in almost new condition! Hagyo Vacuum Universal 300, an industrial vacuum concentrator manufactured in 2023, used only 10-12 times. Regularly serviced and ready for immediate operation. Vacuum concentration is an extremely gentle process: the water evaporates at a temperature below 50 °C, thus preserving the color, aroma, and nutritional values of the raw material, and the final product becomes much more enjoyable. Ideal for: concentrating pressed fruit juices to a jam-like consistency with a high refractive index, at low temperatures, without damaging the fiber and aroma characteristics, concentrating vegetable juices to a jam-like consistency (e.g., pumpkin, carrot, beetroot), extracting spices and herbs at low temperatures. Dedpfjz Iwxnjx Ai Sscn Unique modifications made to this machine (not found on other machines in the series): high-performance defoaming unit, a 300-liter collection tank with a cleaning opening instead of the standard 100-liter tank, so the machine does not need to be stopped for emptying, new silicone elements on the mixing blade. Key features: 300-liter filling volume stainless steel construction, double-walled, with heating jacket mixing and vacuum system with automatic temperature control stainless steel final cooler (condenser) built-in CIP cleaning system, each unit can be cleaned separately evaporation capacity: 30 l/hour (at 50 °C) electrical connection: 400 V, 38 kW (3×63 A) overall dimensions: 2000 × 1550 × 2550 mm Hungarian-language operating manual and machine documentation included Price: 12,000,000 HUF Viewings can be arranged in Szenna (Somogy County) by prior appointment. Reason for sale: change of business profile. Write a message, and I will send you more details!

Condition: excellent (used), Year of construction: 2020, Pallet racking system PR9000 for 36 Euro pallets This pallet racking system is tested according to DIN EN 15512 with a maximum load of 2,200 kg per crossbeam and therefore has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The anti-slip protection prevents goods from slipping through when shelf levels are arranged in parallel. Made of solid, high-quality steel for extreme durability. Withstands high loads of up to 9,000 kg per bay without any problems. High-quality workmanship of the entire pallet racking system. Plenty of storage space thanks to 3 levels and 3 bays. Eye-catching color scheme in blue and orange for maximum safety. Upright profile: Height: 5500 mm Material: Steel S-355 JR Dimensions: 80 mm (W) x 70 mm (D) x 1.5 mm (H) Hole spacing: 50 mm (grid – staggered) Dcjdpfx Aijv Hp Tue Sjn Surface: Blue powder-coated Profile construction: Omega profile Depth: 1100 mm Manufacturing process: Cold-rolled profile Load capacity: 9000 kg The crossbeam: The crossbeams can be individually adjusted in height in 50 mm increments. Total load capacity per crossbeam level: 1800 mm crossbeam: 2000 kg 2700 mm crossbeam: 3000 kg 3600 mm crossbeam: 2200 kg Material: Steel S-235 JR (cold-rolled steel) Profile structure: Rectangular profile Fastening: Hook tabs on both sides of the crossbeam for hanging, secured with a locking pin. Surface: Powder-coated, orange Manufacturing: Folded steel sheet Scope of delivery 4 x uprights PR9000, 5.5 m high / 110 cm deep, load capacity: 9,000 kg 18 x crossbeams PR9000, 3,600 cm wide incl. locking bolts, load capacity per shelf: 2,200 kg 9 x anti-slip protection PR9000, 3,600 mm Delivery 2020–2022 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2000, volume flow: 1 m³/h, KAESER AIRCENTER SM 11 screw compressor Dodpfx Aezdrbroi Sjcn Engine: 7.5 kW Capacity: 1.00 m³/min Pressure: 10 bar Operating hours: 14,749 hours COMPRESSOR IS IN FULLY WORKING CONDITION.

Condition: excellent (used), Year of construction: 2005, volume flow: 5 m³/h, pressure (min.): 11 bar, KAESER BSD 62 screw compressor Engine: 30 kW Capacity: 5.00 m³/min. Pressure: 11 bar Dcsdpfx Aoz Irh Rsi Sen

Condition: used, Year of construction: 2007, operating hours: 73,989 h, functionality: fully functional, power: 25 kW (33.99 HP), volume flow: 5.27 m³/h, pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, For sale is a used KAESER rotary screw compressor, model ASD 47 SFC, with a 25 kW drive power, frequency control, and a heat exchanger for heat recovery. The integrated heat recovery system allows the heat generated during compressor operation to be used, for example, to heat domestic hot water, heating water, or for other operational heat processes. This enables the efficient reuse of the waste heat generated during operation. Technical data: Manufacturer: KAESER Kompressoren Type: ASD 47 SFC Year of manufacture: 2007 Serial number: 3705 Rated power: 25.0 kW Motor speed: 3,000 rpm Max. operating pressure: 8.5 bar Frequency-controlled drive: SFC Dedpfx Asz Eqa Tei Sjcn Control system: KAESER SIGMA CONTROL Heat exchanger for heat recovery Ambient temperature: 3–45 °C CE marking present Operating hours according to display: approx. 73,989 h Load hours according to display: approx. 72,914 h