Used Kilia Grinder for sale (1,305)

Condition: good (used), Seydelmann GW 300 Frozen Meat Grinder Thanks to their robust construction and their extremely strong power of motor, Seydelmann Frozen Meat Grinders guarantee a perfect cutting image even when grinding whole frozen meat blocks down to -25 °C (-13 °F). A very high hourly output and a very uniform grain size is achieved with any material. Seydelmann Frozen Meat Grinders can be integrated ideally into production lines. The machine frame is made of stainless steel and completely closed so that all pipes, motors and other parts are integrated into the machine. All edges are rounded and all surfaces on the machine are polished very precisely and designed with a slope so that cleaning water will drain completely from all surfaces. Thanks to embedded covers and the closed bottom of the machine frame water cannot enter the machine and pollution is prevented. Nlsdpfx Aoy Dquyekfoa The first stage of the size reduction process takes place in the hopper with the worm of the Frozen Meat Grinder. With its extended profile and relief grinding windings, the worm cuts off approximately 8 cm (3.2 in) of the frozen meat block with every rotation, and carries the meat to the cutting set for grinding. The GW 300 is equipped with a two-speed drive. The first speed is for deep-frozen blocks of meat or when using hole plates with small holes and the second speed is suitable for reduction with hole plates with bigger holes. Manufacturer: Seydelmann Model: GW 300 Hole plate diameter: 300 mm Capacity: Up to 10.000 kg/h Power of motor: 78/105 kW Power of AC-6 motor: 140 kW Hopper capacity: 450 Liters Machine dimensions LxWxH: 2.700x1.500x2.400 mm Conveyor dimensions LxWxH: 2.500x900x2.100 mm Total weight: 3.300 kg.

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS Nlsdpfx Asyn R I Hskfsa - Number of hours under power : 01 [h] EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest

Condition: excellent (used), Year of construction: 2009, operating hours: 100 h, functionality: fully functional, machine/vehicle number: SKU 102781, overall weight: 1,300 kg, power: 4 kW (5.44 HP), space requirement width: 1,350 mm, space requirement length: 1,520 mm, space requirement height: 1,400 mm, Equipment: rotational speed infinitely variable, The special design of the Multi Grind makes it possible to combine the functions of cylindrical, surface, and tool grinding in a single machine. During external cylindrical grinding, the workpiece can be clamped on one side or supported between centers in the robust tailstock. An internal grinding attachment can also be mounted on the headstock, and even light surface grinding tasks are possible with this model. In tool grinding operations, the Multi Grind allows for precise sharpening of the cutting edges on a wide variety of tools – making it particularly versatile in its application. - External and internal cylindrical grinding - Surface grinding - Tool grinding - Hydraulic table feed - Extensive accessories Nlodpfx Aksxqgi Dofsa

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. The basis of the EMAG W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. Nodpfxstmrlhj Akfola No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. TECHNICAL DATA Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Price, delivery time and equipment of the machine according to agreement.

Condition: used, machine/vehicle number: 1231566, grinding wheel Ø: 300 mm grinding wheel width: 40 mm electrical connection: 380 V, 1,5 kW space needed: 700 x 400 x 1150 mm Nsdpobuaa Ejfx Akfola

Condition: used, respectively Grinding wheel dimensions: 175 x 25 x 51 mm Grinding wheel speed: 2900 rpm Njdpfxodqgmwo Akfela mounted on a common base

Condition: not inspected (used), For sale due to lack of use: 2 Rollomatic grinding machines! CNC 24F3, CNC 24 FJ Nljdpfx Aksyxwylefoa

Condition: ready for operation (used), Grinding wheel dimensions: 200 x 25 mm Nlsdpfxjf Aru Do Akfoa Grinding wheel mounting hole: 51 mm Grinding wheel speed: 2900 rpm Grinding wheel drive: 380 V, 0.7 kW

Condition: used, machine/vehicle number: 053051, grinding area: 200 x 25 mm electrical connection: 380 V, 0,5 kW space needed: 550 x 450 x 1100 mm Njdpfxsbfp Ixs Akfsla weight: 95 kg

Condition: good (used), machine/vehicle number: 12 230091, Grinding wheel dimensions: 300 x 40 x 76 mm grinding wheel speed: 1400 rpm Nodpfscwwm Tsx Akfela grinding wheel drive: 380 V, 1,5 kW Weight approx.: 85 kg Space requirement: 720 x 470 x 400 mm

Condition: used, Grinding wheel dimensions: Diameter 175 mm Width 25 mm Bore 51 mm electr. connection: Alternating current 220 V, 420 W kW space requirement: 400 x 400 x 1140 mm Nedsby Hh Iepfx Akfela weight: 33 kg

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm electrical connection: 380 V, 0,55 kW Nsdod Ixbcspfx Akfsla space needed: 530 x 400 x 1180 mm weight:

Condition: used, machine/vehicle number: 87 54 41 57, Grinding wheel Ø: 200 mm Nodpfx Aksdc Swujfjla grinding wheel width: 30 mm grinding wheel bore: 51 mm grinding wheel speed: 3000 rpm electrical connection: 380 V, 630 W space requirement: 600 x 260 x 320 mm Weight approx.: 23 kg

Condition: used, machine/vehicle number: 87/64-369, Grinding wheel dimensions: 400 x 50 mm Grinding wheel speed: 1400 rpm Drive motor: 380 V, 1400 rpm, 2.2 kW Space requirement: 750 x 470 x 470 mm Nledpfob Tqhqox Akfea Weight: 138 kg

Condition: good (used), Year of construction: 1989, for twist drills: 3 - 50 mm Ø Njdpfxex Ea Nmj Akfela Point angle: 90 - 140° Adjustable relief angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swing motion: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20 / 90 x 20 mm Space required: 800 x 550 x 1140 mm Weight: 120 kg

Condition: ready for operation (used), Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm Grinding wheel speed: 1400 rpm Drive motor: 400 V, approx. 1.5 kW Nedpfx Akex E Rx Uofjla Weight: kg Required space: 700 x 400 x 1100 mm

Condition: good (used), Grinding wheel diameter: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Space required: 1050 x 580 x 1200 mm Nledpfx Akjv D E Szefsa Weight approx.: 140 kg

Condition: ready for operation (used), Grinding wheel diameter: 250 mm Grinding wheel width: 32 mm Grinding wheel bore: 51 mm Grinding wheel speed: 1450 rpm Nodpfxoxpv Aqo Akfola Grinding wheel drive motor: 1450 rpm Drive power: 0.73 kW Electrical connection: 380 V, approx. 1.1 kW Required space: 630 x 550 x 1100 mm Weight approx.: 75 kg

Condition: good (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 3671, power: 0.55 kW (0.75 HP), • Manufacturer: Haarmann • Model: DMPU • Machine type: Universal tool grinding machine • Application: Grinding of drills, milling cutters, turning tools, cutting tools • Design: Compact cast construction, low vibration Motor • Power: 0.55 kW • Speed: 1400–2800 rpm • Voltage: 380 V • Frequency: 50 Hz Nedpfsyvpwqjx Akfela Grinding unit • Grinding wheel diameter: 125–150 mm • Drill grinding range: approx. 3–20 mm • Cutter grinding range: depending on clamping devices • Angle adjustment: manual, finely adjustable • Rests: adjustable, usually on both sides Dimensions & weight • Dimensions: approx. 500 × 400 × 350 mm • Weight: 35–55 kg Year of manufacture: 1967

Condition: excellent (used), Year of construction: 1962, machine/vehicle number: 12.178, CNC roll grinder WALDRICH SIEGEN, 1996 converted into a CNC machine through HERKULES. Max. grinding dia 1.200 mm, max. grinding lenghts 5.000 mm, max roll weight 25 t between the Centers.The machine get a new Njdpfx Ajfbb D Dskfela CNC Control, new Electric Cabinet, new motors, new wiring and new measuring System in 2023. The machine can be inspected after Appointment in our warehouse.

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] Nsdpfx Ajxy S A Iokfela - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest - 1 set of drive knobs - Various wheel holders

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. PRECISION TOOLING:  Nlodpfx Ajyxxgmokfsa USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. INCLUDED: 40MM OR 50MM ARBOR AS NEEDED OPTICAS SETTING STAND

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Nljdpfxeufi Rxe Akfsa Stator blades: 2 plus blade set: 2 Blade setting table

Condition: good (used), Year of construction: 2012, Kent KGS 250 WM1 surface grinding machine year of manufacture: 2012 max. grinding range: 460 x 200 mm max. height: 300 mm top dresser electronic handwheel variable magnetic force Nljdpfx Akox A D H Rsfja central lubrication touchscreen with settings for rough and finish grinding, etc. cooling water/filter tray documentation machine is powered on for inspection

Condition: ready for operation (used), 2 grinding spindle speeds: 6000 and 12000 rpm Drive motor: 380 V, 0.18 kW Nljdpfoyv Dxijx Akfea Required space: 350 x 100 x 150 mm (height)