Used Kohler Power Wave 5000Tp for sale (38,681)

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 56,00,000 kW (76,13,872.00 HP), continuous power (apparent): 7,00,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures. Isdpfordzg Hjx Acrsth

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Iedjw Nbh Hopfx Acroth Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Contact to set up in person inspection.

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Isdpfszc Nw Aox Acrjth Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Itsdszc Nuhopfx Acreh Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with Rotating Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Iedpfx Ajzc Nubecrjth Injection weight: 175.6 g Injection pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Type distance: 0 x 0 mm Clamping platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection molding machine with rotating table Hybrid machine: high-speed, energy-efficient, and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runners x 12 Injection unit is wear-resistant and corrosion-resistant Rotating table diameter: 1500 mm Rotary table, driven by a servo motor and controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83 x 1.50 x 4.07 m All machines offered are started up by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Ijdpfx Acjwxmb Esreth Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Year of construction: 2006, condition: reconditioned (used), Manufacturer - HIMOINSA Model - HPW-210 T5 Itedeln Uxujpfx Acroh Power - 167 Kw Year - 2006 / reconditioned 2019 Engine . PERKINS 6 Cylinder head ( Typ - 1300 ) Type of fuel - DIESEL

Condition: used, Year of construction: 2006, Nominal volume flow: 4900 m³/h. Minimum volume flow: 3532 m³/h. Intake nozzle: 250 mm. Static pressure at Vmin: 2740 Pa. Air pressure connection: 8.5 bar. Motor: 6.5 kW. Iedpfxszd An Nj Acrsth Storage location: Nattheim.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir and valves -Hydraulic pump: Pressure up to 150 bar -Flow rate: 4 l/min -Motor: -Individual components: see photos -Dimensions: 380/220/H450 mm Itsdpfx Aozfgrhjcrjh -Weight: 28.7 kg

Condition: refurbished (used), Refurbished by a service partner Siemens SIMODRIVE 611 Power Module 400A 6SN1123-1AA00-0KA0 Manufacturer: Siemens Series: SIMODRIVE 611 Type: Power Module Design: 1-axis module Rated current: 400 A Part number: 6SN1123-1AA00-0KA0 Serial number: T-K22036996 Condition: Refurbished spare part Date of manufacture: 05.09.2013 Origin: Germany Packaging: Original box Isdjzd N E Uspfx Acreth

Condition: used, Used power measurement module for integration into industrial laser systems. The device is used for power monitoring and process control in laser applications and features a PROFINET interface for integration into automation systems. Manufacturer: PRIMES Device Type: Power Measuring Module Model: PMM PROFINET Condition: used Year of Manufacture: 2017 Communication Interface: PROFINET PROFINET Revision: 2.3 GSDML Version: V2.3 Device Identifier: PRIMES-PMM-PN-Cu-20140815 Type Identifier: Cu-20140815 2 x RJ45 Ethernet port COM interface External voltage connection Status display: Link Tx/Rx Calibration service sticker present Version for copper interface Location: Kusel Quantity: 6 units available Iodpezdnixofx Acrjth

Condition: good (used), RMS RMS vibration exciter with power amplifier and cooling fan. Ijdpjzdry Usfx Acrjth Vibration exciter SW 1511/2 Power amplifier TGD 3000-000 00 Input: 3x400V-50Hz, 14.5 kVA Cooling fan SWG 108 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 2015, condition: used, Colour: White Empty weight: 117 kg Dimensions (LxBxH): 257 x 82 x 19 cm - Year: 2015 - Documentation available: No - CE certificate present: No - Serial number: 2433368305 - Suitable for material: Wood dust - Capacity [m³/h]: 0 Itsdpfozd A Sbsx Acreh - Negative pressure [Pa]: 2 - Main fan [pcs]: 1 - Main fan power [kW]: 1.5 - Number of filter bags [pcs]: 1 - Filter length [mm]: 540 - Filter diameter [mm]: 45 - Filter surface area [m²]: 0 - Connection diameter [mm]: 120 - Number of connections [pcs]: 1 - Options: Collection bins, Knock-off system, Movable, Control cabinet - └ Type of shaking system: Manual - └ Number of bins/bags [pcs]: 1 - Transport dimensions: 2570mm x 820mm x 195mm (l x w x h) - Transport weight [kg]: 117kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Ijdpfxjzdny Rj Acrsth Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 4,000 kg, Good morning, We have a German-made Meba automatic bandsaw for sale. The machine is in virtually perfect condition. Below is a description of the machine and its features. Designed for fully automatic and efficient production in the steel industry and trade, for cutting solid materials and difficult-to-machine materials. A 2-column automatic machine for cutting at a 90° angle, with a heavy, closed design that dampens vibrations. Minimal space requirement with the highest demands and best cutting results. Technical data: Isdpfx Ajzd Ag Sjcrsth Parameter Round stock Rectangular profile Cutting range: 90° ø 430 mm 430 x 430 mm Maximum machine load: 1000 kg/m Cutting length: * Single stroke: 0 - 600 mm Multiple stroke: 0 - 9999 mm Cutting speed: AC frequency-controlled drive 15–150 m/min, stepless. Adjustable via NC control. Drive power: * Cutting blade: 7.5 kW; 400 V, 50 Hz Hydraulic system: 0.37 kW Coolant pump: 0.37 kW Cutting frame feed: Stepless up to 300 mm/min Cutting blade tension: Hydraulic Cutting blade dimensions: 6220 x 41 x 1.3 mm Length of lead-in (waste): In automatic mode: 25 mm (rectangular material) / 50 mm (round material) Working height: 750 mm (without mounting elements) Weight: 4100 kg Dimensions (L x W x H): 1700 x 3100 x 2350 mm (including chip conveyor) Equipment: -Automatic chip ejector -Chip trolley -Blade break sensor -Blade deviation sensor -Zero face (material positioning) -Interface for importing and exporting data via USB memory -Material database (automatic parameter selection, >500 materials, MEBA blade selection) -Oil mist lubrication -Adjustment of clamping force -Package clamp -Receiving table -Gun for rinsing chips from the machine -White color -Status signal column -Central lubrication -Infeed roller conveyor 3000x500 equipped with 9 rollers We are the official distributor of the Meba brand in Poland. The bandsaw has been inspected and found to be ready for further operation for many years to come.

Condition: used, machine/vehicle number: 475, Nähere Daten und weitere Bilder senden wir Ihnen gerne auf Anfrage zu. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten. Keine Gewähr auf alle Angaben.Nähere Daten und weitere Bilder senden wir Ihnen gerne auf Anfrage zu. Iodpfxszcblrs Acroth Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten. Keine Gewähr auf alle Angaben.

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Itodov U A I Iopfx Acrjh Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 5300 kg Electrical connected load: 60 kW

Condition: as good as new (ex-display), Clean Air Filter Type: Power Unit 250 P FU Offer type: Demonstration machine Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Itjdpfx Acohfmpxsreh Inlet diameter: 250 mm Rated air flow: 3,534 m3/h Max. air flow: 4,900 m3/h Negative pressure at rated flow: 3,184 Pa Filter surface area: 22.4 m2 Compressed air cleaning including integrated pre-separator including integrated automatic extinguishing system including inverter for speed control including integrated acoustic enclosure (-4 dB(A)) Chip collection volume: 2 x 250 L Sound pressure level: 71 dB(A) incl. dust lock Dimensions (L x W x H): 3,000 x 1,058 x 2,361 mm Weight: 850 kg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, fuel type: gas, mast type: simplex, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, empty load weight: 12,270 kg, total length: 3,550 mm, drive type: Treibgas, construction width: 2,000 mm, LPG forklift Load centre of gravity: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: super elastic Front tires size: 8.25-15 Rear tires type: super elastic Rear tires size: 8.25-15 Description: In addition to this Jungheinrich model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this Power+ 987 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork adjustment device, Iodpfewgp Nhjx Acroth Heating, full cabin, Rotating driver's seat

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Frame size 200L Motor speed 2955 rpm Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Itedpfxeyhq Awo Acrsh Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Excellent condition – new, unused from stock clearance

Condition: excellent (used), BUEHLER Beta 49-5100-230D with Vector Power Head Manufacturer: BUEHLER / Wirtz-Buehler Type: Beta Grinder-Polisher Model: 49-5100-230D Machine Type: Metallographic Grinding and Polishing Machine For sale is a metallographic grinding and polishing system from BUEHLER, including Vector Power Head and extensive accessories. The system was developed for the preparation of metallographic samples in laboratories, quality assurance, and material testing. Technical Data Mains connection: 230 V Frequency: 50 Hz Current consumption: 1.6 A Protection class: I Degree of protection: IP20 Grinding wheel speed: 30 - 600 rpm, steplessly adjustable Wheel diameter: 203 mm (8") or 254 mm (10") Power consumption of the base unit: approx. 575 W Vector Power Head Semi-automatic sample processing system Power Head speed: 60 rpm Timer function integrated Automatic force application Single and central pressure operation possible Water and dispenser control Sample capacity, single holder: up to 4 samples Sample capacity, central holder: up to 6 samples Itjdozc Hlkepfx Acroh Pressure force, single sample: 0 - 75 N Pressure force, central holder: 20 - 300 N Compressed air requirement: approx. 6 bar Equipment BUEHLER Beta Grinder-Polisher Vector Power Head Sample holders Consumables as shown in the pictures Polishing cloths Grinding media Documentation and catalogs Further accessories according to the scope of supply Application areas Metallography Material testing Material analysis Quality assurance Research and development Laboratory applications Sample preparation Condition Used Optical condition as shown in the pictures Inspection possible by appointment. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, For sale: two switch-mode power supplies removed from a Finn-Power L6A CO2 laser. Isdpsy Tt Etefx Acrjth Manufacturer: PRC Manufacturer’s code: D8946006S/10 | 0009 HV 401 and D8946006S/12 | 0106HV402 Revision: REV10 / REV12 Price per unit: 3000 EUR. If you have any further questions, please do not hesitate to ask.

Condition: new, Manufacturer: Siemens Condition: New, original packaging opened Type: Power module Series: SIMODRIVE 611 Article number: 6SN1123-1AA00-0CA2 Product family: SIMODRIVE 611 Design: Feed power module Rated DC link voltage: 600 V DC Cooling: Internal air cooling Itodpszcw Rqsfx Acrsh Mounting type: Control cabinet installation Application area: CNC machine tools and automation systems Compatibility: Siemens SIMODRIVE 611 drive systems

Condition: new, Manufacturer: Siemens Condition: New, meaning unused, original packaging opened Type: Built-in power supply Designation: SV-DC/DC Article number: A5E00166828 Application: Power supply for Siemens PCU50 Compatible platform: SINUMERIK / PCU50 PCU50 processor type: 333 MHz Design: Built-in module Power supply unit: DC/DC converter Itsdpezcw Ipsfx Acrjh Application area: CNC controls and industrial automation technology Mounting type: Installation in control cabinet or control unit

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module Isdpfx Aoxvrwdjcreth -Manufacturer: LinMot, Switching Power Supply 72V/1000W -Type: S01-72/1000 -Mains voltage range: Ue. AC 3 x 340-550V / 50/60Hz. -Dimensions: 270/65/H195 mm -Weight: 2.1 kg