Clean air filter

AL-KO Power Unit 250 P FU

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Lhedpefhb Tkjfx Abyoh

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170 kW -- Compliant with German Federal Immission Control Ordinance (BImSchV) Stage 2 and CE standards -- Firebox completely lined with refractory bricks Suitable for rooms of: 4,800 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 40 - 50 kg/h Blower air capacity, free-blowing: 14,000 m³/h Lsdpedlhdbsfx Abyshh Exhaust outlet: Ø 700 mm Smoke pipe connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 volts

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances Lsdpfotvau Aex Abyehh After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle Ledpfx Abofpb Nmeyohh non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer Lhjdpfocc D Ddsx Abyeh remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Hand held barcode scanner 6000 mm infeed with digital pusher Lhodpfx Abjxx Hwweyoh 4000 mm manual outfeed with rollers

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Lsdpfxjw I U Nue Abyohh Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Year of construction: 2014, condition: good (used), For sale: a Nilfisk compact safety industrial vacuum cleaner Type CTS40 M Z22 400 V 4 kW Ledpfx Ajhu Sf Hsbyohh 9 A 50 Hz 114 kg Explosion-proof The vacuum cleaner is in good condition and ready for immediate use. Machine buying and selling WE BUY/SELL PRODUCTION AND METALWORKING MACHINES, AMONG OTHER THINGS. Do you need a high-quality, yet affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2016, operating hours: 200 h, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, feed length X-axis: 100 mm, feed length Y-axis: 190 mm, feed length Z-axis: 325 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 270 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 300 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 190 mm, table width: 200 mm, table height: 1,020 mm, power: 1.1 kW (1.50 HP), height adjustment type: electric, workpiece diameter (max.): 400 mm, input current: 20 A, grinding diameter: 300 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 280 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2022, distance table to spindle center: 325 mm, tool diameter: 300 mm, workpiece length between centers: 270 mm, distance between centers: 270 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 V, 50/60 Hz, with CEE plug and cable Color: light gray Ljdpfew U Ehbox Abyohh motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions ##### Machine is partially overhauled and has an electrical acceptance report!#####

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V weight 75 kg Dimensions (LxWxH) 950 x 560 x 880 mm Inert gas welding machine: - with pulse function - 300 amps - 400 volts - hose package 3m. Lhjdpeu Aw Shofx Abysh - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm