Used Lorch C 4503 for sale (54,486)

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm Tedpfx Aezvz Tbjbtsb - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm Tjdsx Twccepfx Abteb * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Year of construction: 2013, condition: excellent (used), Temperature Test Chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature test chamber from the manufacturer Vötsch. The test chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Tsdjzv S Hfjpfx Abtob Equipment type: Temperature test chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 5 K/min Temperature change rate (cooling): approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Refrigerant quantity: 1.30 kg ND max.: 18 bar g HD max.: 25 bar g Cooling water consumption under full load at Temperature difference Dt = 10 K: 2.2 m3/h Temperature difference Dt = 5 K: 4.4 m3/h Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.6 kW Rated current: 32 A Features Touch panel operation Interior made of stainless steel Side access ports Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature test chamber Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Tedpfx Abstnz Hbjtob Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Tjdpohp Rcrefx Abtsb Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Tjdjhp Rdlepfx Abtjb Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Surfacing planer Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Saw unit Saw can be swiveled up to 45° With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Todpedqzh Tofx Abteb Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated clamp Pre-compactor with end-position dampened cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tedpfx Abobtnf Eetjb Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Immediately available – subject to prior sale. First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Tedpfxelht H Ej Abtob Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Your advantages Stable pressing mechanism with a wear-resistant, chrome-plated die Press chamber wear bushing Pre-compressor with end-position damping cylinder and screwed-on cover Control panel with PLC control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on a stable base frame with rubber feet Briquette length monitoring Robust design, low-maintenance technology, small footprint: The machines in the C-series are particularly suitable for small and medium-sized businesses whose required throughput of 50-80 kg/h or 200 to 400 kg/day is not exceeded. Virtually any suitable material can be briquetted, such as wood, styrofoam, foam, paper, or biomass. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Tedpfxscnz U Ee Abtsb Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (material-dependent) Hydraulic motor (kW) 5.5 Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the length of the briquette to a uniform size Press chamber wear bushing: Prevents wear in the press area Location: Ex works - free loading

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Tedpfx Absy Ehrxetob Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), lifting height: 16,400 mm, Year of construction: 2021, operating hours: 861 h, Empty weight: 2.800 kg Todpfx Abszk D Aujtjb Lifting capacity: 3.150 kg Dimensions of cargo space: 315 x 75 x 195 cm CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: NL Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C6e * 2021 * 861 operating hours * Lithium drive * Remote Control * With all options * 16.4 meter working height * 14.4 meter horizontal reach * 3,150 kg lifting capacity * Equipped with articulated legs * 2,800 kg curb weight

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Todperthkusfx Abtjb Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: good (used), mileage: 6,63,786 km, power: 353 kW (479.95 HP), first registration: 07/2023, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,520 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Heated Mirrors - Carplay - Digital Tachograph - Driver's Log (Recording Device) - Fixed - LED Lamp - Manual - Radio/Cassette - Sleeper Cab - Lane Departure Warning System - Fabric Tjdpfeypapvjx Abtob = Notes = Number of axles: 2, Configuration: 4x2, Payload: 11359 kg, Tare weight: 8141 kg, Gross vehicle weight: 19500 kg, Total tank capacity: 1180 liters, 2nd Diesel Tank, Height of fifth wheel coupling: 115 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Driver's log (recording device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Carplay, Color: White, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 353 kW (473 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 10 mm; Tire tread depth right: 14 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 8 mm; Suspension: Air suspension Weights Tare weight: 8,141 kg Payload: 11,359 kg GVW: 19,500 kg Interior Number of seats: 2 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €807 per month (default, 60 months); Ask for more information and conditions Identification Registration number: 47-BVP-3 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • Good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, In very good condition, used for light milling operations. High-pressure coolant flush through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection system. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Tedpfx Aezw Rl Aobteb Direct sale to end-users only.

Condition: used, Year of construction: 2000, Technical details: turning diameter: 1600 mm turning length: 3000 mm centre height: 800 mm turning diameter over bed: 1600 mm turning diameter over bed slide: 1400 mm turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 Todpfx Abjhutpvetsb travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories *

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Tsdpfsru Rfhsx Abtjb Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped. *

Condition: good (used), mileage: 5,34,650 km, power: 375 kW (509.86 HP), first registration: 04/2023, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,170 mm, total width: 2,550 mm, total height: 3,820 mm, Year of construction: 2023, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Heated Mirrors - Digital Tachograph - Trip Recorder (Control Unit) - Fixed - Globetrotter - LED Lamp - Manual - Radio/Cassette - Lane Keeping Assist - Fabric Tsdpfx Abozl R Dbjteb = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8423 kg, Gross vehicle weight: 18000 kg, Total tank capacity: 1305 liters, 2nd Diesel Tank, Height of fifth wheel coupling: 112 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 12 tons, Suspension type: Air suspension, Type of cab: Globetrotter, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Color: Red, Heated mirrors, Type of lighting: LED lamp, Lane Keeping Assist, Climate control, Bluetooth, Engine power: 375 kW (503 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, I-Park Cool, 534,000 km = Additional Information = Transmission Transmission: VOL, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 11 mm; Tire tread depth right: 12 mm; Suspension: Leaf suspension Axle 2: Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 7 mm; Suspension: Air suspension Weights Unladen weight: 8,423 kg Payload: 9,577 kg GVW: 18,000 kg Maintenance APK (Technical Inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €1,101 per month (default, 60 months); Inquire for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 5,43,468 km, power: 375 kW (509.86 HP), first registration: 04/2023, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,170 mm, total width: 2,550 mm, total height: 3,810 mm, Year of construction: 2023, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, traction control, = Additional Options and Accessories = - 2nd Diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Globetrotter - LED lamp - Manual - Radio/cassette - Lane keeping assist - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 8428 kg, Gross vehicle weight: 18000 kg, Total tank capacity: 1305 liters, 2nd Diesel tank, Height of fifth wheel coupling: 112 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 3 tons, Suspension type: Air suspension, Type of cab: Globetrotter, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Parking cooler, Parking heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Red, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Climate control, Bluetooth, Engine power: 375 kW (503 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, I-Park Cool, 544,000 km = Additional Information = Transmission Transmission: VOL, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 14 mm; Tire tread depth left outer: 15 mm; Tire tread depth right inner: 14 mm; Tire tread depth right outer: 15 mm; Suspension: Air suspension Weights Tare weight: 8,428 kg Payload: 9,572 kg GVW: 18,000 kg Tsdpfx Aozl R A Rjbteb Maintenance APK (Periodic Vehicle Inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €1,101 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: like new (used), Year of construction: 2010, Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg Coolant R410A. 970 g Todpjwa R H Uefx Abtjb 3 units available The air coolers were installed on newly purchased EDM machines. Due to the existing central water cooling system, the air coolers were removed before commissioning.

Condition: good (used), mileage: 3,79,555 km, power: 137 kW (186.27 HP), first registration: 12/2018, fuel type: diesel, tire size: 205/75R17,5, axle configuration: 4x2, wheelbase: 3,650 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, total length: 7,460 mm, total width: 2,600 mm, total height: 3,480 mm, loading space length: 5,200 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, tail-lift, traction control, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Radio/cassette - Lane keeping assist - Fabric Number of axles: 2, Configuration: 4x2, Tare weight: 6100 kg, Gross vehicle weight: 7490 kg, Total tank capacity: 100 liters, Fifth wheel coupling: Fixed, Number of locks: 1, Type of cab: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Seat heating, Bluetooth, Engine power: 137 kW (184 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 6, Power steering, ABS, ASR, Starter battery, System type: ., Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Manufacturer of refrigeration unit: Thermoking, Model of refrigeration unit: T-800r, Refrigeration unit: Diesel/electric, Operating hours / electric: 1445, Operating hours / diesel: 5304, ATP status: ., Wall thickness: 50 mm, Type of cooling: Freezing, Day/night cooling: Day/night cooling, Tail lift, Tail lift design: Rear door, Load capacity of tail lift: 1500 kg, Tail lift manufacturer: Bar cargolift, Tail lift material: Aluminum, Tail lift size: 180x255, FRC 10-2024 Transmission Transmission: ZF, 6 gears, Automatic Axle configuration Tire size: 205/75R17.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 8 mm; Tire tread depth right: 9 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 4 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 6 mm; Suspension: Air suspension Tedpfxoylul Ro Abtsb Weights Unladen weight: 6,100 kg Payload: 1,390 kg GVW: 7,490 kg Functional Tail lift: Bar cargolift, Rear door, 1500 kg Height of loading platform: 100 cm Refrigeration unit: Diesel and electric (5304 operating hours diesel; 1445 electric) Wall thickness: 50 mm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €334 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and complete inventory: Leasing via Kleyn Trucks is possible in most European countries!

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot The machine is in very good condition and is operational. Tjdjzkfh Sspfx Abtob

Condition: used, Year of construction: 2007, operating hours: 1,140 h, load capacity: 200 kg, fuel type: electric, Empty weight: 6.700 kg GVW: 6.900 kg Dimensions (LxBxH): 605 x 150 x 197 cm Mast: articulated arm Working height: 1.500 cm Todpfx Abszxr D Asteb

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: KUKA, This KUKA KR270 R2700 C ultra MED robot arm was manufactured in 2015. Ideal for precise automation tasks, it offers robust performance and reliability. Contact us for more information. Additional equipment • Resolver Cable: 16m • Motor Cable: X7.x flexible, 15m; X30 flexible, 15m • Three-phase Servo Motor: TYP-K/1FK7103 • Reference Switch Assembly: 25m angled / Reference Switch Unit: Cable trailing 15.0m • Adjustment Equipment Set for Additional Axes • SmartPAD: 1.0 / SmartPAD Holder: Medweiß 610 / Extension Cable SmartPAD: 25m and 10m • Scope of delivery: Robot, control cabinet & cable. Machine Benefits Technical Machine Benefits • Production hours: less than 1000 machine hours Tedpozvv E Sjfx Abtjb • Positioning robot: kr c4 / special paint finish: mechanics and base / cooling: standard medwhite 610 / krc4 basic enclosure: eu medwhite / disconnector: 8 kva 380/400/440-400/230v, 25a • Mains supply: eu han6 transformer 8 kva mbc / enclosure paint: siemens white 610 /labeling set: de/en kr c4 • Ethernet interface: x67. 1-3 / reference switch interface: x42 / external power supply interface: x55 / csp standard: 2xusb3. 0 / rj45 - ksi • Controller: mcc-30s med / kss: 8. 3/ safe operation: 3. 2 / ethernet krl: 2. 2 / robot sensor interface: 3. 2 / remote service: 1. 1 / profinet controller/device: 3. 1 • Load: 270 kg / range: 2696 mm

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 injection molding machine Year of manufacture: 2006 Clamping unit Clamping force: 400 kN (40 tons) Distance between tie bars (H × V): 320 × 320 mm Injection unit Screw diameter: 30 mm Maximum injection volume: 85 cm³ Maximum injection shot weight (PS): 77 g Maximum injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle clamping force: 40.6 kN Heating power: 9.4 kW Drive and power Pump drive power: 11 kW Total installed power: approx. 20.5 kW Dimensions and weight Machine length: approx. 3.4 m Machine width: approx. 1.4 m Tsdpfx Abezw A Ehetjb Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg Additional information The machine is equipped with a new screw, which is covered by a warranty.