Used Lugli Lugli 60/C for sale (67,106)

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door Codpfoziycbex Abxsrf - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Crodpfoziyb Rex Abxsf Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 6,010 mm, total length: 2,650 mm, · Spurbreite vorn 2500mm · Breite zwischen den Radarmen 1650mm · Überhang vorne 307mm · Überhang hinten 208 mm · Verlustmaß 1180mm · Anfahrwinkel max 45° · Rampenwinkel max 29° · Abfahrwinkel max 45° · Mastneigung nach vorn 3° · Mastneigung nach hinten 5° Crodpezh Razsfx Abxef · Außenradius Minimum 2540 mm · Außenradius 750mm · Plattformhöhe 1250mm · Höchstgeschwindigkeit 15 km/h · Steigfähigkeit 15% · Standard Lackierung Grün und Grau · Gefederter Sitz KAB Model 211 · Gummimontierte halboffene Kabine · Multidirektionaler Betrieb · Hydrostatischer Allradantrieb · Lastsensible Lenkung · 4-Wege Rad Positionerung · Hydraulischer Ölkühler

Condition: used, Year of construction: 2020, For inquiries regarding the attachment, please contact Mr. Herden (at telephone number: [insert telephone number here]). KEMROC EXR 60 HD surface milling machine / asphalt milling machine / milling machine / incl. MS10 adapter plate / year of manufacture: 2020 / in stock & immediately available Crsdpfxoznrumj Abxof Price: €23,890.00 net / €28,429.10 gross Milling width: 600 mm Adjustable milling depth: 0 – 190 mm Recommended speed: 70 – 95 rpm Recommended oil flow at 100 bar: 150 – 200 l/min Min. oil flow: 150 l/min Max. oil flow: 210 l/min Max. hydraulic operating pressure: 380 bar Torque at 350 bar: 9,300 Nm Cutting force at 350 bar: 28 kN Operating weight: 1,400 kg Number of cutting tools: 69 pieces Recommended excavator weight: 15 - 23 tons Rated power: 80 kW Equipment: - incl. MS10 adapter plate - incl. spare cutting tools - incl. hydraulic hoses (see photos) - incl. transport frame We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (Tel. [insert telephone number here]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 100439 = Further information = Please contact Marius Herden for further information.

Condition: used, Year of construction: 2007, Technical details: x-travel: 730 mm y-travel: 560 mm z-travel: 560 mm turning speeds: 18.000 1/min control: HEIDENHAIN iTNC 530 tool adaptor: SK 40 tool magazin:: 24 Pos. total power requirement: 52 kVA weight of the machine ca.: 6,7 t 5-axis simultaneously, NC-roundtable (dia 600mm) integrated in rigid table (1.000 x 600mm), max. table load 500kg, controlled NC-milling head (B-axis), -120 to +30°, 3D touch probe TS 640, BLUM laser, el. hadwheel, mode 4, Crodpfx Ajy T Rq Hjbxef safety package for power failure, chipconveyor, NO INTERNAL COOLANT SUPPLY ! approx. 87.000h "machine on", approx. 15.000h "program run" latest known spindle change: 2022 *

Condition: used, empty load weight: 6,510 kg, maximum load weight: 32,490 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 03/2026, total length: 25,500 mm, total width: 39,500 mm, total height: 1,28,750 mm, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2024, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, brakes: other, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, color white, air suspension with lift, lift axle on the 1st axle, disc brakes, fixed side underrun protection, 1 storage box, 2x7 + 15-pin power connectors, electric hydraulic unit, stainless steel toolbox, left/right conduit holders, Alcoa Durabright, single wheel mudguards, rear support, foldable catwalk, 5 dome covers, reversing lights, additional equipment details upon request, minor vacuum damage (see photos) Crodjxx Dc Dopfx Abxof

Condition: used, OKK PVC-60 X-axis 960mm, Y-axis 610mm, Z-axis 600mm Table dimensions: 48.03" x 25.20" Maximum table load: 1,760 lbs. Travel ranges: (X) 40.16", (Y) 25", (Z) 20.47" Crodpfxjzmqdwe Abxsf Distance table surface – spindle nose: 7.87" – 28.35" Distance spindle center – column: 33.07" Spindle speed: 100–6,000 RPM Spindle taper: CAT-50 Spindle motor: 15/10 HP Rapid traverse: (X, Y) 630 ipm, (Z) 472 ipm Feed rate: 157 ipm Tool capacity: 20 positions (ATC), dual-arm swivel system Tool change time: 3 seconds Tool selection: Random principle (any order), bidirectional Integrated, hardened and ground flat guideways (box ways) Coolant unit Fully enclosed, spacious splash guard Machine weight: 13,640 lbs.

Condition: used, functionality: fully functional, fuel type: diesel, Year of construction: 2023, operating hours: 181 h, construction height: 2,310 mm, drive type: Diesel, load capacity: 2,190 kg, construction width: 1,230 mm, Farm loader Crjdpfxjvgiazj Abxjf Mast type: None Technical condition: very good Front tires type: pneumatic Front tires condition: 80 - 100% Rear tires type: pneumatic Rear tires condition: 80 - 100% Rear work lights, front work lights, heating, soot filter, full cabin, CE certificate, safety light, Image serves as a symbol for quick coupler pump type: gear pump hydraulic flow rate - hydraulic pressure: 58.3 l/210 bar system pressure drive: 420 bar

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling Crodpfx Abszii D Ijxsf • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Crjdpfxsziizgo Abxjf Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: ready for operation (used), KSB ETABLOC-G 50-160/114 ID: 48862505 pump with QU FS 90S4A-60 H motor, serial number: 163752M, used, in good condition, 100% functional, scope of delivery as shown in the photos. Credpfxozh Sc Rs Abxof

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, water tank capacity: 25 l, KARCHER BR 40/25 C Bp Pack Scrubber NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW NEOS 24V 10A BATTERY CHARGER 400mm cleaning head equipped with new medium-hard cylindrical brushes for work on any surface. New natural rubber squeegees A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The suction turbine ensures high water suction power from the squeegee. Crjdpfx Asytplbsbxsf Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: battery Clean/dirty water tank (l): 25/25 Brush pressure (g/cm²): 250 Brush speed (rpm): 1350 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW NEOS 24V 10A BATTERY CHARGER NEW 400mm PPL0.5 cylindrical brushes NEW suction hose NEW drain hose Suction bar with new rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 25 liter tank allows for a large amount of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise suction of the solution from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 12/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 682 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 9 mm Middle right - 9 mm Rear left - 11 mm Csdpfx Abey Uc Dzjxerf Rear right - 12 mm

Condition: used, Year of construction: 2002, This listing is for a Stephan VM 60 industrial mixer, designed for heavy-duty mixing applications. The machine features a large stainless steel conical hopper with a hinged lid that includes locking handles for secure closure. The mixing bowl is double-walled, which allows for both heating and cooling during operation, enhancing process flexibility. The interior of the mixing bowl is equipped with mixing blades and paddles, designed to ensure thorough mixing of materials. The mixer is operated via an electric motor mounted below the mixing bowl, accompanied by a control box located on the side of the machine. The control panel includes buttons, a display screen, and a safety emergency stop button, providing user-friendly and safe operation. Hydraulic or pneumatic piping is connected to the machine, and the hood opens hydraulically with an in-built hydraulic aggregate, facilitating easy access for loading and cleaning. The machine is designed to be emptied by tilting, which aids in efficient discharge of mixed materials. Scrapers are installed to assist in mixing and cleaning processes. Temperature control is also part of the machine's features, supporting precise process management. The equipment shows signs of use, with some dust, dirt, and minor rust visible on the floor and certain components, including the motor housing and hydraulic connections. However, the mixing bowl interior appears clean and well-maintained. The control panel's interior wiring and electronic components are intact with no visible damage. The machine is currently secured with green straps on a pallet, indicating it is prepared for transport or storage. Please note that this model does not include a built-in vacuum device; such a system would need to be installed separately if required. Overall, the Stephan VM 60 is a robust industrial mixer suitable for applications requiring controlled temperature mixing and hydraulic operation. Csdpezqcpaefx Abxerf Walls: Double Heating: Through the Wall Product Pump: Yes Ingreediant infeed: Yes Skid Mounted: Yes Controls: HMI PLC Condition: Excellent Available: Immediately

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Crsdpfx Abozh Htwexef Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Crsdpfxezh D E Rs Abxsf Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, fuel type: electric, Heavy duty castors, heavy duty wheel, tire, wheel, swivel castor, -Payload: 1,000 kg -directable -Brake -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 6x bikes available -Price: per piece -Weight: 10 kg/piece Cedjcgqc Espfx Abxsrf

Condition: used, fuel type: electric, Heavy duty castors, heavy duty wheels, tires -Payload: 1,000 kg -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm Credpfxscgqc Hs Abxof -Total height: 305 mm -Number: 9x wheels available -Price: per piece -Weight: 7 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Crjdpfx Ajgvwazsbxof -Manufacturer: Parker, hydraulic cylinder stroke 600 mm -Type: C-3LRLS29MC -Piston rod: Ø 88 mm -Admission: shaft Ø 25/10 mm -Piston: Ø 127 mm -Pmax: 100 bar -Dimensions: 1070/210 / H140 mm -Weight: 66 kg

Condition: used, Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable Crodpfxsc N N Hxo Abxsf -Width: 595 mm -Height: 680 mm -Depth: 700 mm -Admission intermediate dimension: 180 mm -Bore mounting: Ø 51 mm -The mounting on the spoon can be changed by us at an additional cost -Net weight: 152 kg

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems Crjdpfxofzluzo Abxef -Price: complete -Dimension: Ø 150 x 60 mm -Weight: 2,1 kg/piece

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8160-C -Hole diameter: 50 mm / bolt circle diameter 67 x 14 mm Cedpfx Asu Ridlsbxerf -Dimensions: Ø 173 x 60 mm -Weight: 5.3 kg

Condition: good (used), Hydraulic pressure switch, pneumatic pressure switch Crjdpfxsb A N Ays Abxjf -Type: EDS 1691-NCPressure: 16 bar -Operating voltage: 24-20 VDC -Signal output: 4-20 mA Price: per piece Quantity: 2 available -Weight: 1 kg

Condition: good (used), Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg Cedpfx Abswqmfusxjrf

Condition: good (used), 3/2-way valve, mini solenoid valve, solenoid valve, pneumatic valve, air valve, pressure valve Valve block, control block -Type: 6012-C-1,2-FB-PA Price: per piece -Quantity: 6x Available Crodob A Sgajpfx Abxef -Weight: 0.2 kg