Used Mecctron Sam 70 for sale (13,082)

Condition: used, Internal combustion forklift, gas-powered forklift STILL model RX 70-16T Serial No. 517314G00021, Year of manufacture 2016 Rated load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carriage width 980 mm Overall height 2160 mm Overall width 1100 mm Overall length without forks 2200 mm Self-weight 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic side shifter Hnodpfxsinldws Ah Sst - Internal combustion electric drive - 4-cylinder Volkswagen internal combustion engine with 30 kW - Hydraulic power steering - Work light at the front - Rear warning light (blue) - Warning flashing light at the rear (yellow) - 4-wheel superelastic, solid rubber tires, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for starter battery, maintenance charger VICTRON - New TÜV inspection and UVV certification (surcharge 150 EUR net) in good condition

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm Hodeiqhiaspfx Ah Sjnt -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Hjdpfxeiq Uz Ro Ah Sjnt ✔ Power: 30 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 28 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: used, Cloth lapper, polishing wheel, grinding wheel Hodjb A S Ryspfx Ah Ssnt -Cloth lapper with abrasive cloth: grain 220 -Diameter: Ø 160 mm -Width: 30 mm -Take: Ø 50 mm -Number: 7x brushes available -Price: per piece -Weight: 0.3 kg

Condition: good (used), Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm -Thickness: 18 mm -T-slots: 12 mm -Surface: milled Hnodpfxjb E N Tte Ah Sot -Weight: 3.5 kg

Condition: new, bending length: 1550sheet thickness: 1.2upper roll diameter: 70 Hnsdjd Ab T Ispfx Ah Sjt Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 362,-- - Hardened rolls EURO 550,-- - Variable Speed of Rotation  We have many references!

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump Hnedpsdwc I Iefx Ah Sst -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm -Dimensions: 650/460/H600 mm -Weight: 60 kg

Condition: used, Direct current, gear motor -Power: 2 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 02050F IEC80 -Translation: 1: 24.01 -Shaft diameter: 25 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 605/240/H200 mm -Weight: 30 kg Hnjdpfx Ahjd Evuks Sjt

Year of construction: 2015, condition: good (used), Vehicle description Diesel/Hybrid Truck STILL RX 70-35 Hybrid year 2015 acc. Counter 9.113 hours 3,5 tons lifting capacity 2.25 meters headroom Hnodpfx Asp Dulvoh Sst 4.79 meters lifting height - Triplex free lift mast - sideshift - 4th circle to fork carriage - lighting system - Service NEW in timing belt and water pump - ready for immediate use - beautiful forklift selling price: 18.950,-- net Also favorable delivery possible!

Year of construction: 2014, condition: used, Scrubber dryer Hakomatic B 70 CL battery 24 volt Hnodpfspgmg Sex Ah Sjt

Condition: new, Eaton XN-2AI-PT/NI-2/3 input module SN 42369-70 Part No. 140067, unused in opened original packaging, 100% functional, scope of delivery as per photos Hodpfx Ahepnpl Rj Sjnt

Condition: good (used), scrubber-dryer, floor cleaning machine, mop, gearbox -Manufacturer: Gansow, gearbox from scrubber-dryer 70 BF 70 .: 40S 11 001 -Bolt circle: Ø 90 mm -Translation: i= 8:1 Hnsdpekx Sriefx Ah Sjt -Number: 2x gearboxes available -Price: per piece -Dimensions: 270/125/H125 mm -Weight: 4.7 kg/pc.

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor Hnedpfx Aot E D E Eeh Set -Manufacturer: Nord, spur gear motor with brake -Type SK 32-112 M/4 BRE60 i= 20.70 -Speed: 70 rpm -Engine: Type SK 112M/4 BRE60 -Power: 4.0 kW / 1445 rpm -Voltage: 400/690 VDY -Shaft: Ø 40 x 80 mm -Brake: 60 Nm -Dimensions: 745/260/H280mm -Weight: 76 kg

Condition: used, machine/vehicle number: 517301G00071, Diesel/propellant gas) BM 573200 - Internal no.: 5178095 - serial no.: (517301G00071) - Make: STILL - Type: RX 70-25 - Year of construction: 2017 - Lift mast: NiHo - H2 mast free lift: 1,700 mm - H1 mast free lift: 2,475 mm - H3 mast free lift: 3,690 mm - H4 mast maximum height: 4,500 mm - Fork carriage: #Int. sideshift, 1040 mm, 2A - Forks: 2000 mm - Tires: Supelelastik - Canopy: Cabin Hnjdpfx Aott I H Tsh Sot - Description: raised cab - Driver's seat: MSG 65 Exklusiv PLUS textile cover - Hydraulic auxiliary system: simple for NiHo - Fuel system: Diesel tank 58L - Exhaust system: High exhaust, Eberspächer - Air filter system: Dry with pre-scraper and perforated plate - Hydraulic control: Mini-lever (4 levers) - Drive control: Single pedal - Reversing light: LED, on FSD, top, right - Lighting system: LED, normal, without MK - Searchlight: LED, on FSD, top, left+right - Hour counter: Hour counter - Cold store version: Standard - Warning signal when reversing: #STILL SafetyLight 4PLUS - Paint finish: Orange/silver metallic - Lettering: German - Operating hours counter: 2,700

Condition: good (used), Servo motor, geared motor, electric motor, three-phase motor -Handover in its current state as shown in the pictures -Cable connection is loose -Manufacturer Motor Lenze Type: MDFKARS080-22 -Manufacturer of gearbox: Lenze, type: GST07-2NVCK2E -Power: 3.9 kW Hsdscqhlcopfx Ah Sjnt -Speed: 70 rpm -Shaft: Ø 40 mm -Design: B5 -Protection class: IP 55 -Number: 1x motor available -Dimensions: 720/200/H245 mm -Weight: 53 kg

Condition: new, Year of construction: 2026, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Hnedpodktnksfx Ah Set

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo Hjdedkzvijpfx Ah Ssnt -Type: DC-70-0400PPV -Piston: Ø 70 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 2x available -Price: per piece -Dimensions: 91/91/H553 mm -Weight: 4.3 kg

Condition: excellent (used), Cloth rag, polishing wheel, grinding wheel -Cloth rag with abrasive fabric grit 220 Hnedpfx Ahsb A Nnkj Sjt -Diameter: Ø 160 mm -Width: 40 mm -Hole: Ø 30 mm -Number: 6 brushes available -Price: per piece -Weight: 0.4 kg/piece

Condition: good (used), Bezel, setting stick, lynette Hsdpfjb A Rfpjx Ah Sont -Max. passage: Ø 70 mm -Peak height: 200 mm -Drawing with the photos -Weight: 8 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Contents: 175 l -Width: 680 mm -Height: 650 mm -Depth: 700 mm -Quick-change mount -Intermediate mounting dimension: 260 mm -Laceration teeth Hodpfxjb A I Imj Ah Sent -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 230 kg

Condition: good (used), adjustable geared motor, electric motor, electric geared motor -Speed: 14-70 rpm -Power: 4 kW -Design: B5 -Shaft diameter: Ø 48 x 110 mm -Protection class: IP 54 Hnsdpjb A R S Iofx Ah Sot - Electrically adjustable: via geared motor -Dimensions: 1100/350/H600 mm -Weight: 250 kg

Condition: used, Year of construction: 2008, screw size 18 mm Hnedpfx Ahsywzv Ij Sst closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, For sale: 2 units of professional spiral dough mixers AYPEK AYP-MIX 70, suitable for bakeries, restaurants, and food production. Hedpfx Aeyybkkeh Sont These industrial machines are designed for intensive use and provide consistent, high-quality dough mixing. The mixers are in good working condition and ready for operation. Available as a set or individually.

Condition: excellent (used), functionality: fully functional, Genini TBK 70 Automatic Lathe Output square 45×140 mm (approx. 10 pcs/min – 600 pcs/h, with 2 roughing tools – 1 finishing tool) Max. workpiece block: 70×70 mm Min. machinable block: 20×20 mm Max. machinable length: 300 mm Hedpeyxqc Hjfx Ah Sent Min. working length: 25 mm CE mark

Condition: new, Sicmi PSV 70 M - Hydraulic workshop press with a servomechanical handwheel for cylinder adjustment The PSV model is particularly suitable for sheet metal straightening, inserting bushings, or sheet metal inserts. The lowering and raising of the cylinder is controlled by a handwheel with a servomechanism, which allows for adjustment of the cylinder position to within hundredths of a millimeter, thus ensuring absolute precision. The cylinder stroke is 350 mm and exerts a maximum pressure of 270 bar. Since the approach speed of the cylinder is 10 mm/s or less, the operator can operate the electro-hydraulic press with only one hand. The platform is mobile, and its vertical movement is achieved using the main cylinder, which simplifies sheet metal processing and pressing operations. The hydraulic workshop press with a servomechanical handwheel is also available in a version with a transverse cylinder, which allows for transverse movement of the main cylinder using a handwheel. This solution therefore allows you to always work in the center of the cylinder axis, avoiding processes that could damage the hydraulic press. Correct positioning and locking of the cylinder in the desired position is ensured by a specially designed system. The frame of the PSV hydraulic workshop press is made of an extremely rigid, electro-welded steel construction, which has been specially developed to ensure maximum robustness and stability. Optional equipment: Hjdpfx Ahjzcphbs Sent System for preventing cylinder rod torsion Support plates Pair of V-shaped prisms