Used Miller Pressen Mp645E for sale (286)

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Hodpfxeuqc Hfo Ai Denl Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Extended machine accessories Press body can be tilt

Condition: used, Year of construction: 2001, machine/vehicle number: 150204, Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton Standard configuration electrical overload protectionSIEMENS Control S72-hand control panel Hnsdevmfznjpfx Ai Del Extended machine accessories Automation Schleicher leveller (650 mm, max. 2.0 mm)Wanzke decoiler (max. 6t)Helmerding feeder (600 mm, 0,6 - 6,0 mm)

Condition: new, Year of construction: 2024, functionality: fully functional, PILLAR table length 2600mm undercutter blade angle adjustment Hnedpfx Aisvitbuo Dol up/down blade adjustment maximum blade diameter 300mm MILLER spindle diameter 35mm spindle revolutions 2000/3100/4400/7000 rpm up/down spindle adjustment LEVELLING AND THICKNESSING MACHINE working width 410mm 3-knife shaft length of worktops 1800 rpm maximum height of material 220mm feed 1 gear HORIZONTAL DRILLING MACHINE

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW Hjdpfx Aetrhf Aei Denl weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2374, functionality: not functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 150 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 580 mm, table length: 450 mm, table height: 900 mm, ram plate width: 580 mm, ram plate length: 450 mm, distance table to ram: 430 mm, oil tank capacity: 380 l, total length: 1,200 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 4,200 kg, installation height: 430 mm, pressing speed: 25 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Hnsdpfx Ajxyxx Aji Dsl

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 30 mm x-travel 850 mm y-travel 435 mm Control HEIDENHAIN TNC 150 total power requirement 16 kW weight of the machine ca. 3500 kg dimensions of the machine ca. m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _____ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Hnjdpfot Hxa Hjx Ai Dsl

Condition: used, Year of construction: 1975, pressure 200 t stroke 20 - 200 mm ram adjustment 130 mm Hsdpfxjyhq Sxj Ai Djnl daylight (stroke down, ram adjustment above) 380 mm table surface area 1150 x 800 mm no. of strokes 25 - 75 Hub/min total power requirement 9,8 kW dimensions of the machine ca. L 1,7 x B 3,0 x H 3,8 m

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, warranty duration: 3 months, type of cooling: air, welding current at 60% duty cycle: 285 A, welding current at 100% duty cycle: 270 A, welding current (min.): 5 A, welding current (max.): 400 A, For sale: Kemppi MasterTig MLS 4000 with 3 Months Warranty Steel – Stainless Steel Weldable Refurbished – Serviced – Tested 5-400 AMP 30% ED: 400A 60% ED: 285A 100% ED: 270A 400 Volt Gas-cooled 2/4 Step Pre gas Post gas Up slope Down slope Stick option Including: 8 Meter Welding torch Earth work lead with clamp Gas hose Trolley Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Hjdpfxoyk Trye Ai Donl OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of cooling: air, welding current (min.): 30 A, welding current (max.): 60 A, Note: This is a Trade-in For sale Schweißring Plasmacut 65P 30-60 AMP Cuts up to 30mm 400 Volt Refurbished, serviced, and tested Hnodpfeyk Tq Nex Ai Dol Including Plasma torch, earth work cable with clampo, and air hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Required air pressure: 6-8 bar Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits Hnjdpfsyf A N Dox Ai Dsl - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps - Mitre stop for FD 21 - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops - Coupling system for table extension

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Hodpfx Aeyfvhaoi Dsnl Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: used, Year of construction: 1990, pressure 125 t throat 360 mm stroke 8 - 140 mm daylight, max. stroke above - ram adjustment above 500 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm no. of strokes 60 Hub/min tool shank hole (depth x diameter) 90 x 50 mm total power requirement 23 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm Hedpfx Ajyatx Eji Donl - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized tappet height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reverse switch (return) - Electric stroke counter - Electric preselection counter - Cam switch mechanism The machine is partially overhauled in-house as follows: - Disassembled, cleaned, and completely technically inspected - New paintwork (also available according to customer specifications) - New seals - New control cabinet with touchscreen, including wiring of the machine - Current press inspection

Condition: excellent (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: A500P, type of input current: three-phase, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 8,000 mm, welding current at 60% duty cycle: 500 A, welding current (min.): 2 A, welding current (max.): 500 A, Demo OTC A500P – Water-cooled TIG ACDC Welding Machine 24-month warranty Demo Model, Ready for immediate use for manual welding or robotics. Hnedpfsyhdxxjx Ai Del Suitable for: Robotic welding, aluminium, steel and stainless steel production welding, heavy construction, machine building. Not suitable for: On location, hobby. Specifications: 2-500A 60% ED 500A 380 Volt AC TIG / DC TIG / AC-DC TIG Pulse Synergistically adjustable Water-cooled 2/4 Step High frequency Pre gas / Post Gas Start current / end current Up slope / Down slope AC Balance / AC Frequency Pulse Frequency Spot welding Programme Memory Electrode option Includes: PRO30 8-metre welding torch, ground cable, and gas hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: not inspected (used), machine/vehicle number: Henneke MT6, functionality: unexamined, Henneke high-pressure mixing head MT series "MT6" Hnjdjx El Drspfx Ai Dsl

Condition: used, sheet width 300 mm coil weight 400 kg coil internal dia. 240 - 640 mm coil outside dia. 1000 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Double decoiler, type MSD 18 (machine no. 18791): Hnjdpopflptjfx Ai Dol Bandwidth: 300 m Spool weight: 400kg Coil outer diameter: 1000 mm Coil inner diameter: 240 - 680 mm Straightening machine, type MR17S60M (machine no. 18591): Bandwidth: 100mm Band thickness: 0.2 - 1 mm

Year of construction: 1984, condition: used, pressure 100 t distance between columns 1000 mm stroke 150 mm table surface area 1000 x 700 mm distance table/ram 500 mm die cushion stroke 180 mm ram surface 1000 x 700 mm ram drills x depth 50 mm no. of strokes 85 Hub/min tool shank hole (depth x diameter) 85 x 50 mm clamping slots 22 DIN 650 form diagonal number of clamping slots 2 sheet width 400 mm plate length 1000 mm dimensions of the machine ca. 3,0 x 3,0 x 3,0 m weight of the machine ca. 8 t total power requirement 30,2 kW - fine adjustment of stroke Hedpfsfn Apzox Ai Denl - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm Hsdpfxjvprv Rj Ai Djnl table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company.

Year of construction: 1996, condition: used, material width 150 mm material thickness 2,5 mm feed length 485 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Hodeul D Slopfx Ai Dsnl

Condition: used, pressure 160 t distance between columns mm stroke 200 mm table surface area 2040 x 840 mm throat 450 mm no. of strokes 30 - 55 Hub/min dayligth 450 mm ram surface 1700 x 800 mm ram adjustment 100 mm total power requirement 11 kW Hodpfstqm Dgox Ai Donl weight of the machine ca. 21,1 t dimensions of the machine ca. 2,2 x 1,94 x H 3,66 m - safe for hand inlay work - Conversion to West - Photoelectric barrier

Year of construction: 1971, condition: used, pressure 160 t throat 440 mm stroke 20 - 120 mm table surface area 1050 x 750 mm no. of strokes 42 u. 62 Hub/min Hnedpfxscyc Ado Ai Del ram surface 800 x 500 mm tool shank hole (depth x diameter) 85 x 50 mm hole in the table 355 mm daylight (stroke down, ram adjustment above) 455 mm ram adjustment 100 mm weight of the machine ca. 11,2 t

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm Hsdpfx Aob U Hwmei Donl no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m Hjdpfxob U Hwpe Ai Denl

Year of construction: 1977, condition: used, pressure 40 t throat - mm stroke 8 - 90 mm table size 630 x 430 mm ram adjustment 60 mm no. of strokes max. 65 Hub/min total power requirement kW weight of the machine ca. 2480 kg dimensions of the machine ca. m Hedpjb U Hxfofx Ai Dsnl - tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutch

Condition: used, Year of construction: 1968, pressure 40 t throat 200 mm stroke 150 mm table surface area 600 x 300 mm Hnodsu Dn Shopfx Ai Djl hole in the table Dm. 140 mm ram surface 600 x 300 mm dayligth ca. 325 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1988, sheet width 150 mm coil weight t coil internal dia. mm total power requirement kW Hsdpfxsr Eth Ie Ai Djnl weight of the machine ca. t dimensions of the machine ca. m