Kemppi MasterTig MLS 4000

Kemppi MasterTig MLS 4000 DC

Year of construction: 2022, condition: like new (used), Due to the planned closure of our laboratory in May/June 2026, we are offering laboratory equipment for sale in very good and excellent condition. The entire set is available. All equipment has been used as intended, regularly serviced, fully operational, and ready for immediate use. The offer includes, among others: LCS MS/MS, GC MS, fume hoods, spectrophotometer, shakers, laboratory refrigerators, digestion unit, water bath, laboratory furniture, and many more. This is an excellent opportunity for research institutions, universities, and companies in the biotechnology, chemical, and medical sectors to acquire high-quality equipment at attractive prices. Early reservation of individual devices is possible. Collection is available from May 2026 or upon individual arrangement. We invite you to contact us and inspect the equipment on site in Poland, Warmian-Masurian Voivodeship. Hjdjxmhfrjpfx Ag Noi

Condition: excellent (used), Year of construction: 2013, overall weight: 755 kg, volume flow: 316.2 m³/h, PROD. KAESER TYPE - ASD47 SFC S/N - 3068 YEAR - 2013 POWER (kW) - 25 Hjdpfx Aora Akzsg Nei OUTPUT. (m3/min) - 1.07-5.27 CIS (bar) 8.5 WAVE - yes BUILT. DRYER - no EXCHANGER - yes

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. Hedpfowhxiajx Ag Noi System can be converted to 2 workstations and supplemented with manipulators available in stock.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 10 h, Compact precision small rotary table, suitable for single part or small series production in laser welding precision mechanics. A horizontal or vertical assembly is possible. - Made in Germany - Hodpfx Agsb Nbpws Nji It is particularly suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, slot milling, or for use on a tool or surface grinding machine. Precision worm gear with a reduction ratio of 50:1. The worm and worm wheel are manufactured in our company, the guarantee for the highest setting precision. The pair is four ball bearings and adjusted backlash free, but adjustable. The stable output spindle is provided with a face plate d=108 mm with inner taper MK 1 and through hole 10.5 optionally M12 internal thread. The electronic control as a handy module with foot switch in clockwise rotation with power supply and emergency stop included in the package.the speed can be adjusted according to the scale of 0-50 min-1. The speed change occurs promptly with the setting when the axis is rotating. The direction of rotation is determined by the foot switch. The right switch makes the axis rotate clockwise, the left switch counterclockwise. When the foot switch is pressed, the axis accelerates to the set speed, when the switch is released, the axis brakes again. Ideal for laser welding for Hermle, Trumpf, Haas, Maho, Deckel FP1, G1 or Gravograph. We can offer you

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Hsdpfx Ajv Ipcfsg Nei Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 5,000 h, 1. Industrial robot from the manufacturer KUKA type KR20 R-1810 KRC4 Technical data: Maximum reach 1813 mm Rated load 20 kg Maximum load 23.9 kg Maximum additional load strut / wishbone / arm Hodpspivhisfx Ag Noi - Position repeat accuracy (ISO9283) ± 0.04 mm Number of axles 6 Installation type Floor; Ceiling; Wall; Any angle Installation area 430.5 mm x 370 mm Weight approx. 250 kg

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Hedpfx Aowc A Rdog Nsi

Year of construction: 1910, condition: as good as new (ex-display), Laser Welding Head Laser Processing Head HIGHYAG Laser Technology PDT as good as new from stock clearance, probably never used incl. (everything as shown): - Focusing module 0,75; Lambda = 900-1060nm - PDT Zoom Collimation Hsdpsf Ucn Eofx Ag Nei - Compact SGM 2 - Info Label: HAN: SE05010/1083: V4.9: 90 800 333 Control unit PDT: PDT-D

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 23750, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,300 mm, spindle speed (max.): 24,000 rpm, overall weight: 1,20,000 kg, grinding spindle motor power: 32,000 W, We offer this used FOOKE Endura 905 Linear planer-type milling machine - double column, year of construction 2008. Machine type: Endura 905 Linear Hsdpfx Ajyazmkog Nsi Year of manufacture: 2008 Voltage: 400/230 V Frequency: 50 Hz Power: 130 kW Electrical enclosure rating: IP54 Weight: 120000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Hedpsw Ah Axefx Ag Nji Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency