Used Mueller Apparatebau 8300 for sale (171)

Condition: ready for operation (used), working width 240mm working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom spindles speed 6000 RPM - two last 8300 RPM Kdodpjw Afgujfx Ac Nsl two axes heads regulation spindles diameter 40mm electric regulation of working height variable regulated feeder pneumatic pressure of feeding rolls

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Kodpfxsxfvh Se Ac Nedl

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Kdjdpfeu Nlkxsx Ac Njl

Condition: ready for operation (used), Year of construction: 2021, operating hours: 808 h, functionality: fully functional, machine/vehicle number: P20512, turning length: 200 mm, spindle speed (max.): 12,000 rpm, turning diameter: 16 mm, counter spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 36, Automatic lathe with only 808 spindle hours! Equipped with bar feeder and additional accessories! TECHNICAL DETAILS Max. turning diameter: 16 mm Max. turning length: 200 mm Max. drilling diameter: 10 mm Max. drilling diameter counter spindle: 8 mm Main spindle max. speed: 12,000 rpm Counter spindle max. speed: 12,000 rpm Spindle bore: 20 mm Kdsdpfsw Raxmjx Ac Nsl Tool size: 10 mm Main spindle tool holder: FC261-M Counter spindle tool holder: WF0660-M Tool stations: 36 Rapid traverse: Rapid traverse all axes (except X2, Y2, Y3 & B): 32 m/min Rapid traverse X2 axis: 16 m/min Rapid traverse Y2 axis: 8 m/min Rapid traverse Y3 axis: 32 m/min MACHINE DETAILS Weight: 2,950 kg Operating hours Spindle hours: 808 h Power-on hours: 2,635 h EQUIPMENT Mueller CL1 high-pressure pump FOX WS 2-1000 mist separator Minimag 20 bar feeder Microconic MASA ultra-precision collet for the counter spindle Note: The machine has minor sheet metal damage, but only the outer covers are affected (see photos). The machine is fully operational.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2015 servo envelope inserting system available. 12 station base system!!!!! More pictures will follow soon. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Kedpfxsxyfmgo Ac Nodl Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, WEINIG four-sider U17A, year of manufacture 1982 with 7 spindles with universal spindle used Spindle arrangement: bottom-top-left-right-top-bottom-universal Motors: 4.0 - 3.0 - 5.5 - 7.5 - 5.5 - 4.0 - 4.0 kW Planing width approx. 170 mm Planing height approx. 120 mm Spindle diameter 40 mm Kdsdpjx Sqdkefx Ac Njl Pneumatic pressure of the rollers Infeed before the jointer Continuously variable feed speed Extraction port 7 x 120 mm Space requirement approx. 5200 mm x 1400 mm x 1500 mm Weight approx. 3000 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. Kdsdpfsxz Eg Nsx Ac Nsl The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.

Condition: used, functionality: fully functional, M&J/Metso Shaft-B 10 knives. used. incl Bearing 1 Arr. Kjdpfx Acsv A Eycs Nodl

Condition: excellent (used), functionality: fully functional, M&J 6000-12 Cutting Table Mint condition Kdjdpfow Ufhbjx Ac Nsl Counterknives fully rewelded and hardfaced Shafts with Bearing System 1 arrangement ✔️ Ready for immediate use Contact us for price and further details.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Rotor diameter: 252 mm Rotor working width: 600 mm Kdjdpfexru Hyox Ac Nel Rotor speed: 60 – 100 rpm Cutting system: 28 blades, 30 x 30 mm Screen perforation: 15/20 mm or as required Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection rating: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shut-off in idle mode - Vibration-damping machine feet - CE-compliant - GS mark “dust-tested”

Year of construction: 2013, operating hours: 10,422 h, condition: ready for operation (used), functionality: fully functional, Replacement disc (+ two-component adhesive) included! ECHNICAL DETAILS digging depth: approx. 6.451 mm reach: approx. 8.380 mm tires: 10.00 x 20 Weight: approx. 18 t Fuel type: Diesel Kdjdpfx Aenad Npec Nsl Engine power: 128 kW / 172 PS Transport dimensions L x W x H: 8300 x 2810 x 3190 mm EQUIPMENT - with clamshell bucket - with dozer blade - solid rubber tires - outriggers left/right

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 800 kg, Two battery assembly trucks from Schairer Apparatebau are for sale. Viewings are available by appointment. Kdjdpfxjv Tv Dao Ac Njl

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft Kedpfxjixxwms Ac Nodl 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C Kjdpfjcmr D Hex Ac Nedl external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Year of construction: 2025, condition: new, functionality: fully functional, Cyclone LZA 800, heavy-duty version, incl. internal wear plate Diameter: 800 mm, total height: 2500 mm Designed for a volumetric flow rate of approx. 5000 m³/h Upper section of cyclone: - Diameter: 800 mm - Height: 800 mm - Material thickness: 3 mm - Internal wear plate: 5 mm (bolted) - Immersion tube Ø350 mm - Inlet nozzle Ø250 mm with beaded edge Kodjxyzpwspfx Ac Njdl - Bolt-on flange t=6 mm - Coated in RAL 7035 light grey Lower section of cyclone: - Diameter: 800 mm - Height: 1500 mm - Material thickness: 3 mm - Outlet nozzle Ø300 mm with beaded edge - Bolt-on flange t=6 mm - 2 mounting brackets - Coated in RAL 7035 light grey Other cyclone models in both heavy-duty and light-duty designs, as well as accessories such as rotary airlocks, conveying fans, wind sifters, etc., are available on request.

Condition: like new (used), FISCHER Maschinen- und Apparatebau AG Type: H50/3v Serial No: 002664417-3 Year: 2013 Made in Austria Technical details: Ksdpfx Acoxpitvo Nedl Flow rate: 25 m³/h Head: 15 m WS Power: 3 kW Speed: 2900 rpm Minimum back pressure: 1 m WS Condition: The pump appears unused and comes from the surplus stock of a factory closure. However, due to its origin, we cannot guarantee that it is brand new. Sold as is, as shown in the photos.

Condition: like new (used), Technical data: Type: H65/4v Year: 2013 Flow rate: 24 m³/h Head: 15 m WC Power: 4 kW Speed: 2900 rpm Minimum back pressure: 2 m WC Manufacturer: FISCHER Maschinen- und Apparatebau AG, Austria Kdsdpfoxpiutox Ac Nel Condition: The pump appears to be unused and comes from surplus stock of a closed factory. Due to its origin, we cannot guarantee that it is brand new. It is sold as seen in the photos.

Condition: used, mileage: 2,23,415 km, power: 115 kW (156.36 HP), first registration: 07/1990, fuel type: diesel, overall weight: 12,200 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2022, color: yellow, gearing type: mechanical, total width: 2,350 mm, total height: 3,550 mm, Equipment: ABS, all wheel drive, * Radio * Reversing camera * Differential locks * All-wheel drive * Rail system * High pressure flushing system * Vacuum cleaner * Particle filter * Hydraulic front * Weight & front hitch ----* Tire dimension: 11.00R20/11PR * Overall length: 8300 mm * Sp due: 02.2023 Kedpfx Ajvhui Dsc Nodl ----Vehicle number 6333 -----Errors excepted & subject to prior sale

Condition: used, TECHNICAL DETAILS - Number of axes : 18 - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speeds : 400-5000 [rpm] COUNTER-SPINDLE WEIGHT & DIMENSIONS - Machine floor space : 8300 x 2300 [mm] - Machine height : 2240 [mm] - Machine weight : 11500 [kg] EQUIPMENT Kedswuu Rmepfx Ac Nodl - CNC : Fanuc PNC Deco - Chips conveyor : Mayfran - Coolant tank * with high-pressure pump - Bar loader : TORNOS MSF 832/6

Condition: used, mileage: 90,300 km, first registration: 03/2010, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,850 mm, fuel: diesel, color: red, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: other, loading space length: 5,600 mm, loading space width: 2,280 mm, Year of construction: 2010, Ramp truck/machine transport Kdodpexf Tuiofx Ac Nel MAN TGL 8.220 darkroom / double cab 6 seats! First commissioning: 03.03.2010 Read speedometer reading: 90,300 km Manual gearbox, 6 gears Emission class: 5 Load space: Length: 5.6 meters Width: 2.28 meters Drive-on height: 0.67 meters Loading floor height: 0.9 meters Wheelbase: 4.85 meters Load capacity: +/-3100 kg Total weight: 8300 kg Tires on the first axle: +/- 60% Tires on the second axle: +/-40 % Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,500 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, coolant supply: 15 bar, spindle motor power: 33,000 W, controller manufacturer: HEIDENHAIN, controller model: 430 CA, power: 0.033 kW (0.04 HP), Equipment: rotational speed infinitely variable, ANAYAK HVM 9000 – CNC moving column milling machine | 8300 mm x travel | Fully overhauled High-capacity CNC bed milling machine with moving column, reconditioned in workshop. Perfect for heavy-duty machining of large components with precision and reliability. Kdjdpfjqpd D Iex Ac Nol 🛠 Key technical specifications: • X-axis travel: 8300 mm • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle power: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Tool changer: 30 positions • Automatic axes: B and C • CNC Control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Full retrofit includes: • Regrinding and geometry adjustment of Y and column guides • Complete head overhaul: new bearings, seals, gears • Full electrical cabinet update under CE compliance • New telescopic covers, drag chains, and motor wiring • Machine tested and delivered with full documentation ✅ Ideal for: • Large-scale component machining • Energy, wind, and railway industries • Mold making, aerospace structures, and shipbuilding 📌 Ready for immediate delivery. Power, scale, and accuracy in one robust CNC machine.