Used Nabertherm Salt Bath Oven for sale (1,736)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Dujdpfxefy T Spe Ag Aeu 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Duodjfzb Nbspfx Ag Aju Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Dusdpfxsfzb Nij Ag Asu Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Dujdpfefzccnox Ag Aeu 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Dsdpfx Aefzkqmog Asuu Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events Dodpfofz U Hvex Ag Aeuu It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Duedpfxjfz U S Ee Ag Aou Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Year of construction: 2019, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, inner dimension length: 950 mm, inner dimension width: 635 mm, inner dimension height: 140 mm, total length: 1,190 mm, total width: 1,075 mm, total height: 900 mm, number of chambers: 2, actuation type: electric, Pizza/stone base oven – (without humidification) up to 400°C 2 levels – internal dimensions per level approx. 950 x 635 x 140 mm Modern touchscreen display, power 400V, 10kW Dusdpfsyg N D Djx Ag Aeu With 4 legs (removable) H = 380 mm For flammkuchen, pizza, lamacun, etc. Used until recently, ready for immediate use, test run possible (Stone base heavily used – optional: new or operation without stone base possible) We have 6 units – used, from our own operations. All manufactured in 2019/2020/2021 – price/unit/negotiable 1,750,-- We have 1 unit – like new – never used Manufactured in 2021 – price € negotiable 2,500,-- Package price possible for dealers.

Condition: ready for operation (used), Year of construction: 2022, Operational condition machine! Ask for additional information and pricing. Available in Q3. Dedpfxjy S S D So Ag Asuu

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, NEW ++ NEW Unox Speed Compact Hot Air Oven NEW ++ NEW Unox Speed oven for baking, cooking & steaming Touch control/operation with ADAPTIVE Cooking & SPEED Plus 384 cooking programmes & 10 favourite programmes can be stored Tray size 300 x 300 mm Temperature range from +30°C to 280°C Oven-Microwave-Hot Air Flows Duedpfexckakox Ag Aou Dimensions: 424 x 669 x 616 mm (W x D x H) Connection 220-240V, Schuko plug New unit with warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Special trays Spees.Bake tray Quick.Rinse hand shower Speed Marks Ethernet connection DDC.App Spray & Rinse cleaner Maintenance contract Delivery service Commissioning & instruction Visit our large oven showroom!

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, DGUV certified until: 06/2027, Deck oven Wiesheu model: Minimat 1 M. Convection oven for 3 trays. Stainless steel construction. Manual controls. Robust technology. Connection: 230V. Dimensions: 600 x 700 x 550 mm (W x D x H). Used oven, cleaned & SAB tested. Dodpfx Ajrkz Ihsg Aouu Option: - Baking tray - Maintenance contract - Delivery service Many more TOP ovens in stock!

Condition: used, REF: MM6460 1 x Mono MX electric single-rack rotary oven. All equipment to be removed from the factory by the Buyer. Dusdpfx Aezcc Uneg Asu

Condition: used, REF: MM6454 1 x Double D electric single-rack rotary oven. Djdpfx Agezccpfe Aouu All equipment to be removed from the factory by the Buyer.

Condition: used, REF: MM6452 1 x Baker Perkins travelling oven with 15m long x 1580mm wide belt NOTE: Belt missing 12 x sections/lines. Djdpfx Aszccfgjg Aouu All equipment to be removed from the factory by the Buyer.

Year of construction: 2003, condition: excellent (used), functionality: fully functional, LINE 2 - Muffin/cake depositing, baking and filling line, comprising of: Duedpfx Agjzcb E Ss Asu 1 x Comas MUFFIN LINE 8-lane depositor. Type-IS 800. Serial no. 3505. Date of manufacture – 2003). 1 x Baker Perkins travelling oven with 15m long x 1580mm wide belt. All equipment to be removed from the factory by the Buyer.

Condition: excellent (used), Year of construction: 2017, Fully functional, in very good technical and optical condition. The set contains: DEBAG DILA 5 / 10 oven + 2 loading spaces. Baking Sheets/Tray - Accessories. Duodey T Hunepfx Ag Aeu Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m.

Condition: excellent (used), Year of construction: 2020, Zucchelli Forni Modular 2C2T Modular oven Serial: 2020E0860 2020, Stainless, two deck modular oven, chamber size 800mm x 600mm x 160mm, with adjustable temp and time controls, stone based, electric, 11.3Kw, mounted on mobile rack storage, 3Ph Djdpjv T Ablefx Ag Aeuu

Condition: good (used), Tom Chandley BOMK4MTU3 Oven and proofer Dodpfx Agov T Acps Aouu Serial: 10837 Stainless, 15.5Kw, Three deck oven with proofer, adjustable temp and timer controls, chamber size 900mm x 700mm x 180mm, stone based, mobile, 3Ph

Year of construction: 2002, condition: excellent (used), 10-2 bar, year of manufacture 2002 Dujdpfx Aoykyqiog Aou

Condition: excellent (used), Year of construction: 1995, Year of manufacture: 1995, sintering vacuum furnace Duedjyq Iy Sspfx Ag Aeu

Year of construction: 2022, condition: used, Frame is from 2012 and machine fully rebuilt in 2022 by ERSA OEM. 1x fluxing module 1 drop jet flux head 180µm 3x preheating modules bottom IR lamps and top side convection 2x solder modules multi wave (dip modules) one standard size and one XL with electromagnetic solder pump No traceability system installed New conveyors retrofitted with heavy load chain system Duedpfx Agey Uihtj Aeu Ask for the full overview of the rebuild and its condition!

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 735 mm, total width: 890 mm, total height: 595 mm, DGUV certified until: 06/2027, Firebrick floor Lower and upper heat individually adjustable Temperature adjustable from 0 to 450 ° C for 4 + 4 pizza (32 cm) Dujdpfx Aofmcg Sjg Aju 2 baking chambers each 660 x 660 x 140 mm Stainless steel version Connection 400V, 9 kW, 32A-CEE plug Dimensions: 890 x 735 x 595 mm, WxDxH Weight 126 kg New device with warranty Option: Underframe

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,380 mm, total width: 1,600 mm, DGUV certified until: 06/2028, warranty duration: 24 months, Equipment: CE marking, documentation/manual, NEW NEW Oven NEW NEW Model Modul 1-1208 Modular deck oven with stone plate for trays 2 x 60x80 / 4x 60x40 LED program control Stainless steel construction Temperature up to max. 350°C Only with us: DGUV V3 inspection Connection: 400V, 32A-CEE plug Dimensions: 1600 x 1380 x 440 mm (W x D x H) NEW unit & SAB tested 24 months warranty + spare parts service Option: Exhaust hood with condenser Mobile base with tray rack Proofing cabinet Peel apparatus Manual loader Maintenance contract Duedpfx Asttryqsg Asu Training & commissioning Leasing & rental service More ovens in stock!

Condition: good (used), 700 USED WP Unitherm trolley oven. The oven with a gas/oil burner. EXTERNAL DIMENSIONS (in cm.): Djdpfxeq R Ug Dj Ag Aeuu - W:135, - L: 210, - H: 290. The USED device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: used, Year of construction: 1994, Model: CookStar CKH400/8/130 Year of manufacture: 1994 Condition: Used Serial number: 138 Stock number: 3341G Belt width: 400 mm Description: Equipped with belt water pump and CIP system Rows: 2 x 4 units Belt length: 44 m Product opening: 130 mm Dwell time: 2.5 - 75 min Temperature: max. 200 °C Heating: thermal oil, 300 kW Extraction: 2 x 2000 m³/h Steam: NW40, 4 - 8 Bar Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 35kW Dimensions: 8250 x 3150 x 4250 mm Weight: 12000 kg Dsdoy R Tiajpfx Ag Aeuu