Used Pester Pac Automation Cellophane Wrapper for sale (16,053)

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor Fodpfxeibichs Afpspi - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: new, Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item condition: New as shown Possible traces of storage, installed but not put into operation. Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories 30kg Further articles - new and used - you will find in our store! International shipping costs on request! Fjdpfepug Ayex Afpspi

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Aluminum chassis with plexiglass enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! Fpedpfx Aex Elfcsfpoi International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Fpsdpex Elkfefx Afpji Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 240 h, control type: CNC control, controller manufacturer: Hypertherm, controller model: Edge Connect TC, sheet thickness steel (max.): 40 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 5,000 kg, warranty duration: 12 months, Used Esprit Automation CNC Plasma – High Definition XPR170 This Esprit Automation CNC plasma cutting system is presented in exceptional, near-new condition with less than 300 operating hours. Built for precision and reliability, this machine is equipped with a Hypertherm XPR170 high-definition plasma system, delivering superior cut quality and performance across a wide range of materials. Key Specifications: Cutting Area: 3000 x 1500 mm Plasma Source: Hypertherm XPR170 (High Definition) Gas System: VWI Gas Module Included Piercing Capacity: Up to 40 mm Mild Steel Operating Hours: < 300 hours Condition: The machine is in pristine condition, having seen minimal use in a controlled environment. Fully maintained and ready for immediate operation. Additional Information: Fpsdpfx Afeyzuw Tjpsi 12-month parts warranty included Ideal for high-precision fabrication, engineering, and production environments Excellent opportunity to acquire a premium CNC plasma system at a fraction of new cost

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option Fjdpfoya H S Ssx Afpepi

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001-549, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fedpfszg Dyxex Afpspi Stretch film Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm Film thickness: 10–35 µm Top film Maximum roll diameter: 250 mm Core diameter: 76 mm Film thickness: 15–90 µm

Condition: repair required (used), Compressor-Controlled Expansion Vessel Automation, Flamco Flexcon M-K 1600, Used machine Fedpfx Aszkbcrofpspi Manufacturer: Flamco B.V. (Netherlands) – Premium manufacturer of HVAC and heating system technology Type / Series: Flexcon M-K 1600 (Compressor-controlled expansion automaton) System type: Diaphragm expansion vessel with control unit for heating and cooling systems Nominal capacity: 1600 liters Condition: Used, Compressor is missing from the vessel Overall dimensions: Technical and operating parameters: Maximum working pressure: 6.0 bar / 10.0 bar (depending on specific model variant, to be verified on nameplate) Maximum system temperature: 120 °C Maximum continuous diaphragm temperature: 70 °C Control / Supply voltage: 230 V / 50 Hz (or 400 V depending on the compressor block configuration) Protection class: IP 54 (Dust and splash-water protected control cabinet) Suitable Application Areas: The Flexcon M-K is a high-performance, compressor-controlled expansion unit specifically designed for pressure maintenance in sealed heating, solar, and cooling systems. Industrial and district heating systems: Precise, fluctuation-free pressure maintenance for large-scale heating networks and thermal stations. Office buildings and public facilities: Expansion volume compensation for central HVAC, cooling, and heating systems. Optimal degassing: The compressor-controlled operation minimizes system pressure drops, preventing bubble formation and reducing pipeline corrosion.

Condition: used, machine/vehicle number: 008346, Max width workable: 1300 mm Fpsdpfx Afjyl Ihrjpji Max length workable: 1250 mm Max height workable: 650 mm

Condition: used, machine/vehicle number: 008584, Max. panel width: 2200 mm Max. panel length: 5600 mm Lifting capacity: 200 Kg Stock dimension length: 40000 mm Stock dimension width: 12000 mm Fpodsy Stv Aspfx Afpji

Condition: used, Used machine Equipment and technical data: - Film material: LLDPE - Film width: 500 m - Max. roll diameter: 250 mm - Max. film thickness: 35 µm - Roll core diameter: 76 mm - Max. pallet height: approx. 2000 mm - Dimensions: approx. 3200 x 1700 x 2500 mm Availability: short notice Location: 63934 Röllbach Fedpozkngdofx Afpspi

Condition: used, Used machine Equipment and technical data: - Film material: LLDPE - Film width: 500 mm Fjdpfx Afjzknf Topopi - Max. roll diameter: 250 mm - Max. film thickness: 35 µm - Roll core diameter: 76 mm - Max. pallet length: 1675 mm - Max. pallet width: 1675 mm - Max. pallet height: 2200 mm - Max. pallet weight: 1500 kg - With access ramp - Dimensions: approx. 3000 x 2000 x 3200 mm - Weight: approx. 750 kg Availability: short notice Location: 63934 Röllbach

Condition: new, Schneider Automation TSX A25 KPE 141-1 MMS Ethernet Controller, condition and serial number as shown in the photo, unused in open original packaging, 100% functional, scope of delivery as shown in the photos. Fpsdpfei Ec Hzsx Afpoi

Condition: new, Schneider Automation TSX A250 ALU 154 CPU, 4 MB Modnet1/SFB, condition and serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fpjdpfx Asi Ec H Eofpoi

Year of construction: 2021, condition: used, Karl Roll RUK0200-130-150-04 Automated part washing system (2021) The automatic cleaning system is used exclusively for cleaning and degreasing metal parts using aqueous media. Including a VE-Water supply 3x400V/50Hz-415kW/647A total connected power 2000x1300x1600mm batch size/workpiece carrier size (L x W x H) 8.0 batches/hour max. throughput with a batch weight of 300kg (including workpiece carrier) depending on the program 450 kg (carrier + goods) max. batch weight/The weight must be evenly distributed in the basket Cleaning station volume 7550 liters approx. Station 1 6900 liters approx. Station 2 6900 liters approx. Station 3 7500 liters approx. VE water tank Heating - electric 96 kW Station 1 72 kW Station 2 72 kW Station 3 24 kW VE water tank 72 kW Hot air station 75 °C max. temperature cleaning baths 65°C max. temperature VE water tanks Process Station 1: Cleaning 1 in aqueous solution, hot Filter circuit with pressure monitoring Pressure recirculation device Fluid draining Oil separator Short stroke via trolley Re-dosing of 2 different media, Refilling directly or via pump cascade from station 2. Fpjdjy Uxvtjpfx Afpsi Station 2: Rinse 1 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley Refilling directly or via pump cascade from station 3. Station 3: Rinse 2 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley DI water recirculation system, Refill directly. Station 4 on unloading track: Hot air drying Fans Heating coil with temperature monitoring Air supply via filter Adjustable Bypass exhaust air Condition: Very Good

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 7,000 mm, total height: 2,200 mm, total width: 2,350 mm, input voltage: 380 V, overall weight: 1,700 kg, compressed air connection: 6 bar, warranty duration: 12 months, film width: 250 mm, power: 5.2 kW (7.07 HP), product height (max.): 850 mm, product height (min.): 50 mm, product length (min.): 650 mm, EDDA Olympia 150s BN | Automatic "Total Closing" Bubble Wrap & Stretch Wrapping Machine Fodpfx Aey D Nzljfpepi The Olympia 150s BN is a premium, fully automatic horizontal orbital wrapping machine featuring the innovative Total Closing Series technology. Engineered specifically for the furniture, door, panel, and wood-processing industries, it combines Bubble Wrap (Air Bubble Film) and Stretch Film application in a single inline process to provide 360° total protection for high-value or fragile products. Advanced Total Closing & Dual-Layer Protection: Simultaneous Dual Coating: Applies a protective layer of bubble wrap followed immediately by an industrial stretch film layer, ensuring maximum cushioning against impacts and scratches. Complete 360° Sealing: Delivers a fully enclosed, airtight packaging result that safely protects products from dust, moisture, and transport damage. Optimized Material Efficiency: Precise mechanical/electronic tension control guarantees uniform wrapping while reducing film and bubble wrap consumption to the minimum. Premium Automation & High-End Components: Fully Automated Inline Cycle: Equipped with heavy-duty automatic film clamping, cutting, and welding units—completely removing manual operator dependency. Integrated Motorized Conveyors: Features driven inlet and outlet conveyor belts that sync perfectly with your factory line for smooth product transit. Pneumatic Top Press Rollers: Adjustable pneumatic vertical hold-down rollers secure the product firmly during high-speed rotation, preventing shifts. Intuitive PLC Touch Screen: Allows instant setup of wrapping parameters, ring rotation speed, and custom overlap configurations via a user-friendly interface. Industrial Heavy-Duty Build: Engineered with a balanced ring mechanism and rigid frame for exceptionally quiet, low-vibration, continuous 24/7 operations. For exact ring diameter dimensions, layout drawings, customized technical inquiries, or detailed catalog pricing, please send us an inquiry directly through Machineseeker.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. Fpedswgbw Ropfx Afpji 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Year of construction: 2000, condition: excellent (used), Weinig High-Mech A4 bundling system Bundle forming packaging unit possible to combine with other Weinig outfeed handling systems available from stock such as buffers and stackers. Consisting of 1. Weinig 815-300 high speed bundling unit 2. Weinig 812-200 outfeed roller conveyor with crossfeed Fjdoq Rvrbopfx Afpjpi 3. Control panel with Siemens S7-300 CPU

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Fpedpfx Ajy Auvxsfpsi Possible to offer with additional Weinig bundling system if needed.

Year of construction: 2005, condition: used, Pallet Wrapper Turntable, Strapping Machine, Packaging Machine, Strapping Machine, Skinpacking Machine, Pallet Wrapper, Stretch Wrapping Machine, Stretch Film Machine, Pallet Turntable -Manufacturer: Spinny, turntable from pallet wrapper, with drive -Turntable: Ø 1800 mm, approx. 11 rpm -Drive: 0.37 kW -Dimensions: 2800/1825/H460 mm -Weight: 344kg Fodpfx Afspm Tibjpjpi

Condition: good (used), Strapping machine, packaging machine, strapping machine, skin packing machine, pallet wrapper, control panel, control unit, control panel, Simatic panel -Manufacturer: Spinny Siemens, control from pallet wrapper S200 -Text display: Siemens Simatic S7 TD200 6ES7272-0AA30-0YA0 -Quantity: 4x controls available -Price per piece -Dimensions: 180/95/H450 mm -Weight: 2.4 kg/pc. Fedpfel U E Ufjx Afpepi

Year of construction: 2005, condition: good (used), pallet wrapper turntable, strapping machine, packaging machine, strapping machine, skinpack machine, pallet wrapper, stretch wrapping machine, stretch film machine, pallet turntable -Manufacturer: Spinny, turntable from pallet wrapper, with drive -Turntable: Ø 1800 mm, approx. 11 rpm -Drive: 0.37 kW -Number: 2x pallet wrappers available Fpjdpfx Aepm Thwjfpji -Price: per piece -Dimensions: 2800/1825/H460 mm -Weight: 340 kg

Condition: good (used), Pallet Wrapper Turntable, Strapping Machine, Packaging Machine, Strapping Machine, Skinpacking Machine, Pallet Wrapper, Stretch Wrapping Machine, Stretch Film Machine, Pallet Turntable -Manufacturer: Spinny, turntable from pallet wrapper, without drive -Turntable: Ø 1800 mm Fpedpfx Afspm Th Tjpsi -Dimensions: 2800/1825/H150 mm -Weight: 318 kg

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Fsdpfjw I U Ecex Afpopi Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: YAM0035, power of the servo motor: 1,200 W, input voltage: 230 V, clearance between the columns: 80 mm, type of input current: AC, throat depth: 150 mm, feed length X-axis: 30 mm, feed length Y-axis: 85 mm, feed length Z-axis: 12 mm, pneumatic connection: 10 bar, AMF REECE ATLAS Mark IV Automated Waistband Machine (2020) Modern High-Speed Production System – Video Ready Category Description For sale is an AMF Reece Atlas Mark IV automated industrial sewing unit, manufactured in 2020. This is a modern programmable production system designed for high-precision and repeatable garment component manufacturing. This is not a standard sewing machine but a fully automated unit capable of executing pre-programmed sewing cycles with high accuracy and consistent quality. The machine has been used in a professional garment production environment and is offered as a complete industrial workstation. Year 2020 Modern digital control system Production-ready configuration Key advantages Modern generation machine with low mechanical wear Fully programmable sewing operations High repeatability and precision Suitable for continuous industrial use European-built unit with strong parts availability Key features Programmable automated sewing cycles Integrated touchscreen control interface Pneumatic-assisted operation High precision stitch control Stable heavy-duty construction (Kessler base) Designed for continuous production environments Fast changeover between sewing programs Includes AMF Reece Atlas Mark IV machine unit Integrated control system with touchscreen Pneumatic components Industrial table and Kessler base Thread holders Technical details Manufacturer: AMF Reece Model: Atlas Mark IV Year: 2020 Serial number: YAM0035 Power supply: 230 V, 1-phase, 50/60 Hz Power output: 1.2 kW Current: 8 A Origin: Czech Republic CE marked Fpodey Nd Ukopfx Afpei Pneumatics required Condition Used industrial condition From professional production environment Typical signs of use Sold as-is, where-is, without warranty Inspection possible before purchase Applications Belt loop operations Pocket attachment Denim component sewing Workwear production Automated garment part manufacturing Repetitive precision sewing operations Location Valga, Estonia Logistics Buyer responsible for dismantling and transport