Used Polar Mohr 92 Em-Mon for sale (8,570)

Year of construction: 2005, operating hours: 14,300 h, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, controller manufacturer: AMADA, controller model: AMNC-F (FANUC 180i-PB), overall weight: 18,000 kg, total height: 2,318 mm, punching force: 20 t, product length (max.): 5,526 mm, sheet thickness (max.): 3 mm, table width: 5,120 mm, number of axes: 5, This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details. • X-axis rapid traverse: 100 m/min • Y-axis rapid traverse: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm Prjdpfx Alsy S A Tkswjb • Punching force: 200 kN • Hits per minute – 1 mm pitch (5 mm stroke): 780 hits/min • Hits per minute – 25.4 mm pitch, X-axis: 500 hits/min • Hits per minute – 25.4 mm pitch, Y-axis: 330 hits/min • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption – machine: 250 l/min • Air consumption – Air Jet vacuum: 250 l/min • Operating air pressure: 5 bar • Tooling visible in the photos • 4 tool cabinets • Technical documentation (manual scan) • Machine + included tooling package shown in the photos • Machine fully operational: Yes (replacement of one pneumatic hose required to eliminate a minor air leak) • Machine connected to power: Yes

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor Pjdpfx Ajyia Enolworb -Manufacturer: Montech, Belt conveyor type TB30 double belt with light switch -Speed: 87 m/min -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Strap width: 2x 15 mm -Conveyor length: 1290 mm -Light switch: Sick WTB9-3P2261, not connected -Transport dimensions: 1290/390/H260 mm -Weight: 14.5 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, center width: 1,500 mm, center height: 250 mm, swing diameter over bed slide: 500 mm, spindle speed (max.): 2,800 rpm, controller model: Monforts Control System MTC K, The machine was overhauled in 2017! The corresponding invoices are available upon request. Prjdpfx Aezdfzaelwsb TECHNICAL DETAILS Swinging diameter over bed: 500 mm Swinging diameter over slide: 290 mm Distance between centers: 1,500 mm Spindle bore: 70 mm Center height: 250 mm Spindle speed: 2 - 2,800 rpm MACHINE DETAILS Control system: Monforts Control System MTC K Control method: Teach-in Dimensions & Weight Dimensions (L x W x H): 3,350 x 1,550 x 1,800 mm Net weight: 3,300 kg Transport packages: 1 EQUIPMENT Fixed steady rest 3-jaw chuck Documentation CE marking

Condition: as good as new (ex-display), Year of construction: 2025, 67641340dc13f Pedjl Rix Eopfx Alworb

Condition: used, Year of construction: 2003, MONTABERT DA370ME year 2003, weight kg 2100, caterpillar quick release Prjdpfx Aljqwcl Howsb

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter Prjdspyk Nujpfx Alwob -Manufacturer: Mann & Hummel, Mann-Piclon combination air filter, air filter housing -Part Number: 45 160 92 951 -Inlet/Outlet: Ø 68/71 mm -Quantity: 23 combination air filters available -Price: per piece -Dimensions: 300/225/H305 mm -Weight: 2.5 kg/pc.

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm Psdpfeh Elztjx Alwerb -Weight: 24 kg

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Control system: Monforts MTC K. Prodshktd Nopfx Alwob Center distance: 2000 mm Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Spindle motor: 21/15 kW Spindle bore: 71 mm 3-jaw chuck FORKARDT 400 mm Tool holder Multifix size C with 3 tool pockets. Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.

Condition: good (used), starter -Voltage: 24 V -81466 - 002 - 24 V 008 -Weight: 20 kg Podpfx Alsb A Nw Sewjrb

Condition: used, Schneidmaschine / Guillotine Wohlenberg CUT-Tec 92 Year 2007 - Serial-No. 3932-009 Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Prjdpfx Alewgbt Sjweb Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2025, condition: new, functionality: fully functional, Available models on GAS and Electrical power supply with different dimensions and capacities Perfect for artisanal bakeries, semi-industrial plants and retail stores The ideal solution for anyone looking for superior baking performance and maximum flexibility when working with different types of bread and pastries, regardless of shape, size or quantity. It burns perfectly at both full and partial loads. Innovative baking systems for perfect results BTT (Bottom to Top) baking system – air circulates from the bottom up, creating a floor oven effect for a unique baking quality. The result: a product that leaves customers breathless! DAF (Double Air Flow) – extremely even baking thanks to the double airflow that encompasses each product. Not available on model 4676. Ideal for: Cakes and pastries of low weight (e.g. 60–70 g Kaiser pastries, biscuits, sticks, tarals...) Fast baking cycles (less than 15 minutes) High racking (more than 18 levels) Narrow and long trays (e.g. 46×80 cm) OPT function – allows you to monitor the efficiency of the furnace operation in real time, helping in more rational use and energy savings Technical characteristics: Baking surface: 6.3 m2 (n°18T 46x76) Oven dimensions WxDxH: 123x171x251 Minimum room height: 270 cm Power GAS: 52 kw 44000 kcal/h Electrical power: 1.5 kW Weight: 1350 kg Max. Baking temperature: 300 °C Heating: electric or gas/light fuel oil Main switch located on the control panel Advanced control and management TOUCH electronic control "Ready to Bake" – the stove is always ready with lower consumption "Recovery Time" – the exact time to re-readiness Partial Load Management Password protection of recipes USB 2.0 for fast and secure data transfer. Effective steam management Speed Dry – faster steam ejection (70% faster), for crispier and more fragrant products Increased steam generator (standard equipment) – higher volume and better steam distribution Automatic steam damper Stainless steel exhaust – 900 rpm Energy efficiency and durability Prjdpowhdhusfx Alwsb High-performance heat exchanger and firebox (in combustible versions) Double armored heaters (electric version) Two-layer high-density mineral wool insulation Rubber-silicone seal + stainless steel – long life and no steam leakage Thermo-reflective glass – saves energy Ergonomic vertical handle along the entire height of the door, with double locking system Raised stove bottom – additional thermal insulation Connection to a power limiter (only on electric models) Construction and ergonomics: Stainless steel front and hood Stainless steel floor with adjustable flaps for air regulation Rotary trolley unit with motor and mechanical overload protection Manual lifting mechanism Trolley access door 194.5 cm high (model 4676 off) Door with hinges on the right side Stainless steel access ramp, gentle inclination for easy insertion/removal of the trolley Flat inner surface – easy to clean Prepainted steel side panels Access to the main controls from the front Heavy Duty version (HD kit) – available for models 80100 and 80120 For intensive work over 8 hours a day and average temperatures above 250 °C – additional reinforcements for maximum durability.

Condition: ready for operation (used), Year of construction: 1998, Machine come with equepement on picture. Predpfx Alofa S E Iswob

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edging and resawing machine, type DR8/225, manufactured in 2007. 7-position variable adjustment, 2 x 110 kW motors each. Pre-trimming saws for side boards. Cutting height 225 mm. Predpofcltgefx Alweb S-type singulation with infeed roller table. Includes tilting and aligning table. Chip separator with two deflectors. Board cross conveyor. Roller conveyor with stripping device. Electrical control cabinet with control panel. Includes all accessories (circular saws, etc.).

Condition: new, Allen Bradley 440R-EM4R2 / GSR EM Safety Relay Series: A 201 SN:055 ,unused in opened original box, 100% working, scope of supply according to photos Prsdpfxjpf An Ao Alwob

Condition: new, Harmonic Drive HDUC-40-96-2A-G-IV gearbox, unused, in original packaging, 100% functional. Psdpfei Eac Tjx Alwjrb

Condition: good (used), Year of construction: 2006, GALLUS EM 410 Year: 2006 10-color Cold foil etc. Prsdpfx Asxzr Awolweb

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 76745, cutting width (max.): 920 mm, insertion height: 120 mm, Year of production 2015 Technical data: Cutting width: 920 mm Pedpfx Aex Upumslwjrb Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Machine can be inspected anytime. Works perfectly. Very well maintained. We are first owners.

Condition: good (used), The machine is in good condition. Prodpfxovu Ak Ns Alweb

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knives 4 pieces -Type: R320 5 220 428 92 Pedpfxovwll Ij Alwerb -Price/Delivery: complete -Dimensions: 330/300/H80 mm -Total weight: 5.6 kg

Condition: ready for operation (used), Grinding wheel Ø: approx. 175/190 mm Grinding wheel width: 30 mm Grinding wheel speed: 2800 rpm electr. Connection: 380 V, 0.6 kW Space requirement: 670 x 400 x 1140 mm Weight: approx. 120 kg Prodjfnbgyspfx Alwsb

Year of construction: 2008, condition: used, machine/vehicle number: 0705012, load capacity 10,000 kg rope diameter 22 mm x 150 metres length according to Pedpfoiqhi Tsx Alwjrb information included in the documentation operating pressure 55 bar up to 80 bar maximum flow volume 19 litres / minute up to 272 litres / minute maximum hydraulic motor Rexroth hydraulic control block with mounting underframe documentation and inspection log book available The rope winch has been used on a test stand / test tower. space requirements length - 2,100 x depth - 1,400 x height - 1,300 mm complete with control block weight approx. 1,500 kg  

Condition: ready for operation (used), Siemens 1FK7063-2AF71-1RH0 SN: YFM0627963202008 Motor - Encoder AM20DQ IP56 / Brake 24VDC 18W 13Nm, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as shown in photos. Pjdjx Duh Ispfx Alworb

Condition: ready for operation (used), Siemens 1FK7063-2AF71-1RH0 SN: YFP0640542025005 Motor - Encoder AM20DQ IP56 / Brake 24VDC 18W 13Nm, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Predpfx Aox Duifslwob

Condition: used, Year of construction: 2005, Mondial Forni , Omega, bakery single pocket divider. Type: Omega; electric connection: 380 V; total dimension L: 650 mm; total dimension W: 2250 mm; H: 2000 mm; 650kg Description: heavy duty quality Price excluding tax and shipping costs. Prsdpfx Ajxuh Icjlwob

Condition: used, Year of construction: 1999, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 210 mm Podpfxjwngkrs Alwsrb spindle taper SK 40 spindle turning speed range 50 - 2600 U/min feeds 9 - 450 mm/min quill stroke 70 mm dimensions of machine L x W x H 1,35 x 1,05 x 1,63 m total power requirement 5,5 kW weight of the machine ca. 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant