Used Ruiz Construcciones Metálicas Hall Construction for sale (20,217)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Ndodpfx Ajwqcm Uskmoc Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training.

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Nsdpfou A U Utex Akmodc The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Ndodpfx Aksxg Ickemec Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Year of construction: 2011, operating hours: 8 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S071361/01, USED GODWIN 12 INCH PUMP MODEL : CD300M SERIAL : S071361/01 ENGING MODEL : CATERPILALR C9 ENGINE SERIAL NO : JSC22260 Ndjdoxiwawspfx Akmsc YEAR : 2011 HOUR : 7.8hrs

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: ROD39, 1 Demag KBK I wall-mounted slewing crane, 400 kg payload / lifting capacity Jib length 2 m, 400 kg payload Equipped with Demag DC chain hoist, 400 kg capacity Weight including wall bracket approx. 200 kg Complete with chain hoist, cable carrier, trolley, and small parts Slewing range 270° Item location: 75053 Gondelsheim System is fully disassembled and immediately available Ndjdpfsxmuumjx Akmsc Shipping by freight forwarder or collection Please enquire for shipping costs by postal code

Condition: used, functionality: fully functional, Year of construction: 1976, machine/vehicle number: ROD109, 1 Demag KBK I wall-mounted slewing crane, 500 kg load capacity / lifting capacity Jib length 2 m, 500 kg load capacity with Demag DC chain hoist, load capacity 500 kg (year of manufacture 2007) Ndedpfxsxmuuyj Akmsc Weight incl. wall bracket approx. 150 kg Complete with chain hoist, cable trolley, travel carriage, and small parts Slewing range 270° Item location: 75053 Gondelsheim The system is fully dismantled and immediately available Shipping by freight carrier or collection Please enquire about shipping costs according to postal code

Condition: used, Year of construction: 2004, frequency 50 Hz weight of the machine ca. 2,510 t 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling Ndedoxgv D Ajpfx Akmec without vice Table Size: 30" x 14.3" Max Table Load: 550 LBS X Axis: 24" Y Axis: 12" Z Axis: 20.47" Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: NOHxx+, 1 Vetter / Demag Wall-Mounted Slewing Crane 500 KG Load Capacity Type PW5-5.0 Outreach approx. 5m, 500KG (0.5t) payload with Demag chain hoist, 500KG capacity (2 lifting speeds) 10 cranes available!!! Total weight approx. 350 kg Year of manufacture 2004, with inspection book Complete with wall brackets, jib, chain hoist, cable trolley, carriage, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim System is completely dismantled and immediately available See pictures Shipping via freight forwarder or pickup Please inquire about shipping costs by postal code Ndjdpfx Akjxmfaysmec

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Ndodpfx Akoxyxfpomoc Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.

Condition: new, Year of construction: 2026, Electric Scissor Pallet Truck HT15E The HT15E electric scissor pallet truck is a multifunctional warehouse device designed for convenient and safe pallet handling. It combines the features of a classic electric pallet truck and a lift table, allowing not only transport but also lifting loads up to 800 mm. It performs perfectly in packing areas, sorting facilities, assembly halls, and production lines. Ndjdpfxexurpde Akmjc With a load capacity of 1500 kg, the HT15E model easily handles most standard pallets. Its robust scissor construction ensures stability and safety of lifted goods, while the electric motor provides smooth, fast, and effortless lifting. The operator doesn’t need to use physical force – simply press a button and the truck does all the work. Powered by a high-performance battery, the truck enables long, uninterrupted operation. Charging is easy with a standard mains charger. This ensures that the HT15E is always ready for use, regardless of workload intensity. The truck is equipped with an ergonomic control tiller, a precise hydraulic system, and high-durability wheels that ensure smooth movement even on uneven surfaces. Its compact design allows easy maneuvering in narrow aisles, while the lifting function helps maintain proper working posture – significantly improving operator comfort and safety. The HT15E is the perfect choice for companies that value efficiency, ergonomics, and reliability. It performs excellently both in small warehouses and large logistics centers where precision and work speed are key. Key Advantages: Load capacity: 1500 kg – stable operation even with heavy loads Lifting height: 800 mm – ideal for order picking and packing Electric lifting system – quick and effortless lifting Reinforced steel construction – resistant to wear and overload High-performance battery – long operating time on a single charge Quiet operation and easy control – comfort in everyday use Technical Specifications: Parameter Value Load capacity 1500 kg Fork height 85–800 mm Fork length 1170 mm Fork width 160 mm Fork spread (outside) 540 mm Fixed wheel ⌀ 75×50 mm (2 pcs) Steering wheel ⌀ 180×50 mm (2 pcs) Battery 12 V / 50 Ah Weight 115 kg

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 02206800, overall weight: 13,200 kg, total width: 6,000 mm, total height: 3,000 mm, total length: 26,000 mm, input current: 80 A, Equipment: documentation/manual, VOORTMAN V630M CNC DRILL LINE FULLY FUNCTIONAL, WELL MAINTAINED -INCLUDING INFEED & OUTFEED ROLLERS -AUTOMATIC TOOL CHANGER -3 SPINDLE DRILLING LINE -INCLUDING FULL SET TOOL HOLDERS Ndjdpfez Ha Hfsx Akmsc -MAX. DRILL SIZE 40MM -30kW SPINDLE MOTOR -MAX. 3000RPM -MAX. PROFILE SIZE 1140X450mm -MIN. PROFILE SIZE 30X10mm -THREAD TAPPING M6-M30 CONTACT FOR PRICE INQUIRY

Condition: like new (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: OTT-110-015457, operating hours: 12 h, ABUS ELV overhead crane, crane system, bridge crane, hall crane, crane 4 units available!!! 3x manufactured in 2011 (9-14 operating hours) / 1x manufactured in 2016 (50 operating hours) Load capacity / lifting capacity: 3.2t - 3,200KG Track gauge: 9485mm, overall width approx. 9600mm Manufactured in 2011/2016 with floor control Lifting height: 6m Overall height from top of crane to hook approx. 590mm (girder 320mm + lifting mechanism 270mm) Head girder length with buffer approx. 2350mm SWP: only 12.3 full-load operating hours used!!! Remaining service life: 1587.7 full-load operating hours! Crane is disassembled and available immediately. Running rails available upon request. Very good condition - almost like new, inspection certificate available. Njdpszund Dofx Akmsdc Column-slewing cranes and wall-slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Ndedpfx Akez A Tl Tjmoc Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: new, TECHNIC Single-Disc Floor Scrubber/Polisher Choose the professional TECHNIC series – one purchase, many applications! The TECHNIC JH-005 model is a powerful, versatile single-disc scrubber/polisher designed for heavy-duty cleaning, deep cleaning, and polishing of various floor types (PVC, porcelain stoneware, terrazzo, concrete, linoleum, stone, and many others). TECHNICAL SPECIFICATIONS OF THE TECHNIC SCRUBBER: Model: JH-005 Manufacturer: TECHNIC Ndjdpez A Trtofx Akmoc Series: Professional Power supply: 1 / 230 / 50 (Ph/V/Hz) Connected load: 1100W Disc rotation speed: 154 RPM Power cord length: 12m Steel handle and control grips: Yes Machine weight: 48kg Brush/pad working diameter: 410mm Noise level: ~60dB Machine dimensions (H x L x W): 122cm x 55cm x 40cm TECHNIC SCRUBBER EQUIPMENT: 1 x Hard PPL brush (0.8mm) 1 x Medium PPL brush (0.5mm) 1 x Soft PPL brush (0.3mm) 1 x Pad holder with plastic drive plate 6 x Americo-type scrubbing pads (6 hardness levels) 1 x Cleaning solution tank 1 x Drain hose for the head 1 x Power cord holder 1 x User manual (Polish and English) APPLICATIONS OF THE TECHNIC JH-005 SCRUBBER The machine is ideal for use in: cleaning companies (routine maintenance and deep floor cleaning), schools, government offices, hospitals, clinics, office buildings, warehouses, production halls, workshops, hotels, guesthouses, restaurants, commercial facilities, shopping malls, shops. Thanks to interchangeable brushes and pads, a single machine allows you to: scrub and deep-clean, refresh and maintain, prepare surfaces for protective coatings. ADJUSTABLE HANDLE: The polisher features an adjustable handle, allowing the height to be precisely tailored to the operator's stature. This enables the machine to be operated in a natural, upright position, significantly reducing fatigue in the back, shoulders, and arms during extended use. An ergonomic handle setting also ensures better machine control—making it easier to maneuver near walls, in corners, or along narrow corridors. Proper handle height improves not only comfort but also steering precision, directly impacting work quality and safety. The JH-005 model stands out due to its steel handle and grip assembly; this sets it apart from many other polishers on the market, where these components are often made of plastic. The handle is the part most vulnerable to damage, as it is used to guide, lift, transport, and often lean the machine against walls. The use of steel significantly increases resistance to cracking, breakage, and deformation, thereby extending the machine's overall service life. Thanks to the handle's robust metal construction, the TECHNIC scrubber is more durable, safer to operate, and better equipped for intensive professional use.

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 150 m2, several rooms – used: Price ex location: €19,500 (net), disassembled, packaged, and loaded! Item 8: Manufacturer: Kleusberg Ndjdpfxozqzyqs Akmjc Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof accessible for personnel, max. load 100 kg Element width: approx. 1.03 m Length: approx. 21.40 m Depth: approx. 7.60 m, or 8.10 m (6-7 elements) Height: approx. 2.96 m Several doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale excludes furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Warehouse offices, room-in-room system, approx. 45m2, 2 rooms – used: Price from location: €6,500 (net), disassembled, packed, and loaded! Ndedozqzzuepfx Akmsc Item 6: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof accessible with a maximum person load of 100kg Element width: approx. 1.03m Length: approx. 9.71m (9 elements, plus 1 narrow one) Depth approx.: 4.66m (4 elements, plus 1 narrow one) Height: approx. 2.96m 2 doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall Includes lighting, etc., as available Without flooring Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Ndodpfxjyak Anj Akmjc Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 33 h, machine/vehicle number: CAT00D7GLC7G01263, USED CATERPILLAR DOZER C/W RIPPER Ndjdpfxjv Dr S Ue Akmjc MODEL : D7G SERIAL : CAT00D7GLC7G01263 HOUR : 33 YEAR : 2009

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 977 h, load capacity: 2,526 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, total length: 3,830 mm, drive type: Diesel, construction width: 1,810 mm, Rigid telescopic handler Njdpfewlxh Rsx Akmodc Speed class: 25 Technical condition: good Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. Lease-to-own options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Manitou MT 625 is a versatile telescopic loader for construction sites, agriculture, and lifting and material handling tasks. With a lifting height of up to 5.85 m, a lifting capacity of 2,500 kg, and all-wheel drive, this machine is ideal for working on uneven terrain and in confined spaces. Narrow design for tight access routes and halls. High maneuverability and off-road capability. Robust, powerful, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height.

Condition: excellent (used), functionality: fully functional, Year of construction: 1974, machine/vehicle number: TD2026, 1 Demag KBK II wall-mounted jib crane, 500 kg load capacity / leverage Nsdpfx Akjzhh Ngemjdc Several units available, 5-7m reach, 250+500kg!!! Reach 6m, 500kg load capacity with Demag chain hoist, 500kg load capacity Weight including wall bracket approx. 350 kg Complete with chain hoist, cable track, trolley and small parts Swivel range 270° Item location is 75053 Gondelsheim The unit is completely dismantled and immediately available Shipping by freight forwarder or collection Please inquire about shipping costs, specifying the postal code.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 2,156 h, machine/vehicle number: 676483, USED AICHI truck-mounted bridge inspection vehicle MODEL : SF75A SERIAL : 676483 YEAR : 2002 Njdozk Uawopfx Akmjdc HOUR : 2156

Condition: like new (used), Two like-new soundproof enclosures, each housing two Busch pumps, are for sale. These enclosures are manufactured by Koch Technik. Price per unit: €950 If both enclosures are purchased together, the total price is €1,600. Ndedsy Tt Dpopfx Akmjc The original invoice from Koch is attached in the documents below.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: HZ379, 1 Vetter US1.25-4.9 Column-swivel crane, NL 125 KG Load capacity at full extension: 125 KG / 0.125 tons Height: approx. 4.4 m, upper carriage boom: approx. 3.62 m Reach: approx. 4.9 m, hook height: approx. 3.2 m Base plate: 55 cm Total weight: approx. 400 kg Including 125 kg Demag DC chain hoist (2 lifting speeds) Connection to 400V 16A, swivel range: 360° Ndodpfoy Udp Eex Akmoc Crane is disassembled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost like new, see pictures Shipping via freight forwarder or collection by appointment

Year of construction: 1989, condition: excellent (used), functionality: fully functional, LEUSHUIS 3500L | Vertical process tank for mayonnaise and sauces Nsdpoy Umxcsfx Akmjdc Manufacturer: Leushuis Apparatenbouw B.V. Type: Vertical storage and process tank with a conical bottom Factory number: A-32058-3007 H-4 Year of manufacture: 1989 Capacity: 3500 liters Intended medium: Salad mayonnaise, thick emulsions, sauces Hydrostatic test pressure: 0.9 bar Design temperature: 50 °C Weight of empty tank: 425 kg Overall dimensions: Ø 2000 mm x 3600 mm This professional, vertical storage and process tank from the Dutch brand Leushuis has a capacity of 3500 liters and is a high-quality component for production lines, designed for advanced food processing. The unit was factory-designed and approved for handling salad mayonnaise (Salatmayonnaise), making it an ideal solution for storing, buffering, and transferring various demanding, thick fatty emulsions, cold sauces, ketchup, mustard, jams, or liquid concentrates. The tank features an optimized, compact design (diameter 2000 mm, height 3600 mm), which ensures excellent stability and simplifies installation in halls with lower ceilings, while maintaining a large storage volume. Its construction entirely from high-quality stainless steel guarantees complete microbiological and chemical neutrality – the tank does not react with products with low pH (acidic reaction of sauces) and does not affect the organoleptic properties of the ingredients. The design parameters allow for safe operation with media at temperatures up to 50 °C, which enables the acceptance of products directly after pasteurization, blending, or emulsification processes.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: A1/000156, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 16,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, number of axes: 6, number of slots in tool magazine: 8, controller manufacturer: Routech- Quicklink, actuation type: electric, total height: 3,270 mm, total length: 32,100 mm, total width: 6,250 mm, overall weight: 21,000 kg, table length: 12,000 mm, table width: 1,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Routech OIKOS 12/19x1.25 – CNC 6-Axis Machining Center for Timber Construction For sale is a Routech OIKOS 12 CNC-controlled 6-axis machining center, designed for the precise processing of solid and laminated timber components for structural wood construction. This machine is suitable for the production of structural elements for single-family homes, hall construction, conservatories, carports, garden sheds, playground equipment, as well as general engineered timber construction. It enables complete processing of beams in a single pass – without the need for manual repositioning of the workpiece. Technical Specifications 6 interpolating CNC axes (X-Y-Z-B-C-A) Routech OIKOS 12 Max. workpiece length: 19,000 mm Max. cross-section: 1,250 x 300 mm Min. cross-section: 50 x 20 mm Max. workpiece weight: 1,250 kg (optionally up to 2,500 kg) Voltage: 400 V / 50 Hz Axis travel speeds: X: 107 m/min Y: 75 m/min Z: 28 m/min Rotary axes: A ±140° B ±180° C ±300° Milling Unit 6-axis special milling head TLT 1 (SCM Group) with: 13 kW continuous power (S1) Inverter power 18 kW Spindle speed up to 18,000 rpm HSK 63E tool holder Liquid cooling Ndsdpjyu Upuefx Akmec Processing in one pass: Milling, sawing, slotting, drilling, profiling, cross-cutting – all sides of the workpiece without re-clamping Tool change system Disc magazine “Rapid 8” with 8 tool positions Max. tool diameter: 360 mm Max. tool weight: 8 kg Additionally equipped with: Motorized saw unit Slotting unit with chain Preparation for adapter units Material Handling C-type buffer zone with 6 conveyor belts and 6 clamping chucks, length 13,500 mm Automatic unloading system 13,500 mm with 6 support beams Automatic waste conveyor for offcuts and chips Continuous processing of multiple workpieces possible. Control & Software CNC with PC Office ROUTECH QUICK-LINK user interface BTL data import from common CAD/CAM systems 3D simulation with collision check Restart after program interruption possible Separate simulation station “SIMOIKOS” for office workstation Safety & Equipment Enclosed safety cabin with Lexan viewing panel Photoelectric sensors at infeed and outfeed 2 extraction ports in the work area Air-conditioned control cabinet, CE compliant Summary The Routech OIKOS 12 is a high-performance CNC machining center for modern timber construction. With its 6-axis technology, high traverse speeds, complete 5-sided processing without re-clamping, and integrated material logistics, the machine is ideal for joineries and timber construction companies engaged in industrial production. Suitable for companies seeking precise, repeatable, and economical solutions for timber joinery processing.