Used Pu for sale (37,527)

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Psdpfxsxrr Uzj Aa Isgu Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: used, machine/vehicle number: 008124, Position 1: Double Sided Squaring/Edgebanding Machines HOMAG-KF 26/9/PU/30 undefinedPosition 3: Panel Stacking and Offloading HOMAG-KF 26/9/PU/30 Pedpfjw Idg Aex Aa Ijgu

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° angle of the miter saws milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° corner copying unit - 3 mm edge thickness Pedpfx Aoxqa Iysa Ijgu scraping unit for chamfers and radii with 2 scraping blade holders surface scraping unit - finish spraying device - PU machine with all processing tools machine is WORKSHOP TESTED in TOP CONDITION

Condition: used, machine/vehicle number: 008121, Type of edging: Thin edge, Thick edge, Solid wood Pgjdpfx Aajw Idhte Ieu Gluing System: PUR Corner Rounding Unit: yes Max Panel Width: 3000 mm Max feed speed: 32 m/min Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr

Condition: used, Holz Her Triathlon 1488 FÜ + PU Heavy-duty model – edge thickness 0.4 – 25 mm SPS screen control Edge-Control Motor-driven, position-controlled height adjustment – belt bridge Automatic infeed fence Pjdpfexm Spbox Aa Ijgu Pre-milling unit for jointing in front of the gluing unit Fully automatic edge magazine for coil and strip material Gluing station for cartridge and PU bonding Glue application via nozzle technology Automatic glue height adjustment Workpiece height 6–60 mm Pressure unit MOT End trimming unit for coil and strip material up to 15 mm edge thickness, with pneumatic adjustment from 0–15° saw angle Milling units – flush trimming for coil and strip material with 0.4–20 mm edge thickness Profile milling unit for longitudinal and end processing of edges, working height 45 mm Scraper unit for bevels and radii with 2 scraper holders, pneumatically activated Flat scraper unit Demand-controlled buffing unit Automatic central lubrication for chain Electronically controlled spray system at infeed and outfeed The machine is FULLY FUNCTIONAL The machine is in operation and can be inspected and demonstrated at the seller’s site at any time Brokerage on behalf of customer Available ex location as inspected, without any warranty NET €8,000.00

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Pgedpfx Aaoxlz Nze Iju Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Surface scraper unit - finishing Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch Pgodpexg Ixrjfx Aa Isu

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Pgjdsw Igg Sjpfx Aa Iju Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Mold temperature control Automatic activation lamp Automatic last rotating Automatic mold slider closing Measurement & quality control tools Pgedpfx Aajxgwa Sj Iou This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2002, operating hours: 35,000 h, condition: ready for operation (used), functionality: fully functional, FOR SALE! Psdpfx Aasxrgnio Ijgu This machine has been in family business since brand new, and has provided for our family ever since, but unfortunately we have to sell it. It has been used daily until March of 2023, and was preserved with a protective fluid that prevents the polyurethane lines and hoses from drying or clogging. The machine can be tested on site. The asking price is for the machine, high quality Italian aluminum shoe sole molds and the oven for barrel heating (volume of the oven is 5m3). The BGM Baby 98 18D M2/R2 is a specialized machine designed for the production of shoe soles using polyurethane (PU). Engineered for precision, consistency, and reliability, this model is ideal for both medium- and large-scale footwear manufacturing. Equipped with dual mixing heads (M2/R2) and independent injection units, it allows simultaneous or alternating production cycles, ensuring efficient output and minimal downtime. The system precisely meters and mixes polyurethane components (isocyanate and polyol) to deliver consistent material quality and density across molds. The BGM Baby 98 18D M2/R2 is widely used in the footwear industry for manufacturing outsoles, midsoles, and insoles in a range of designs and densities. Its robust construction and precision engineering ensure long service life, low maintenance requirements, and high-quality results. Key features include: - Automated PU mixing and injection system for uniform material distribution - High-pressure metering units for accurate dosage and consistent chemical ratios - Dual working stations (18D) enabling continuous operation and high productivity - Temperature-controlled tanks and lines for optimal processing conditions - User-friendly control panel with programmable production parameters - Compact “Baby” frame design, maximizing workspace efficiency without compromising performance

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Pgsdpfx Aaexgrfpj Iju Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: ready for operation (used), Bosch PU 401 servo positioning unit. , used, good condition, 100% functional Pedpfxji D Ubwo Aa Iegu

Condition: good (used), Year of construction: 2009, machine/vehicle number: 48277, MIG-MAG pulse machine of the renowned manufacturer MERKLE. The machine is technically in perfect condition. All switches work and the machine welds perfectly. Only the hinge of the wire feed flap is broken. The technical performance data is best taken from the photographed nameplate. The machine is ready for welding in our warehouse. Test welding is possible at any time. In addition, we supply all accessories and spare parts that you may need. You can download the operating instructions for the machine directly in the advertisement. Pgjdpfx Aemk H Awoa Ieu Shipping possible.

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Pgjdpjxgtgzsfx Aa Isu Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Year of construction: 2011, condition: ready for operation (used), Main Drive Spindle speed range 2800 Pgsdpfx Asxp Sn Nja Iju This NESTRO NE 300 PU Jet was manufactured in 2011. A robust used extraction system featuring a 7.5 kW motor, 2800 rpm rated speed, and a substantial filter area of 33.25 m². It efficiently handles up to 5083 m³/h. Includes a rotary valve and comprehensive delivery scope with dust extractor and silo dimensions provided. Ideal for enhancing your woodworking operations. Contact us for more information about this machine. Application Types Other Woodworking Machinery

Condition: used, machine/vehicle number: 15461, Year of construction: 2015, operating hours: 614 h, load capacity: 2,500 kg, lifting height: 3,800 mm, load center: 900 mm, enginetype: Electric, manufacturer: Dimos Pgjdpfx Aajw R Atto Iju

Condition: ready for operation (used), functionality: fully functional, mileage: 1,04,120 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 5,200 kg, empty load weight: 2,592 kg, first registration: 09/2025, color: grey, driver cabin: day cab, brakes: engine braking, tire size: 195/75R16 107/105R, number of seats: 2, Year of construction: 2014, machine/vehicle number: ZCFC50C100D515072, Equipment: ABS, airbag, trailer coupling, If you have any questions or would like to arrange a viewing, please feel free to contact us. We are offering for sale our Iveco Daily RCS 15 PU 150 NG Metras oil spill cleaning vehicle. For technical enquiries, you are welcome to contact us by phone. Standard equipment: 26801 Driver’s airbag 40000 Anti-lock braking system (ABS) 70303 Traction control system (ASR) 70406 Drive type: Rear-wheel drive 01213 Version: C-Series 40390 Brake assist 37711 Cargo area ceiling light 70308 Electronic stability program (ESP) 25408 Digital tachograph 42509 Rear axle suspension: parabolic 42515 Front axle suspension: torsion bar 35000 Electric windows 22608 Tinted windshield and side windows 74208 Alternator 120 A 26704 Speed limiter system 90 km/h 75205 6-speed gearbox 08403 Body/build: High roof van Podew A Nw Dopfx Aa Iegu 27505 Cargo partition 18205 Headlight range adjustment 24406 Radio pre-installation with speakers 48002 Wheelbase 3300 mm 67108 Tyres 195/75 R16C 107/105 P 18000 H4 headlights 69800 Power steering 33208 Cabin seats: double passenger seat with headrests 44002 Steel rims 5x16 18607 Daytime running lights 38105 Immobilizer 05409 Permissible gross weight 5.20 t Special equipment: 14202 Trailer coupling: fixed tow ball 14296 13-pin trailer socket 14295 Trailer socket pre-installation 15200 Exterior mirrors electrically adjustable and heated 37810 Overhead storage with additional DIN compartment 42905 Rear axle suspension: air 26708 Cruise control system 36505 Rear doors (opening angle 260 / 270 degrees) 29200 Cabin air filter: pollen filter 28901 Automatic climate control 77403 Fuel tank: 90 L 28709 Air conditioning compressor 170 ccm 92206 Engine 3.0 L – 125 kW diesel CAT 18617 Fog lights with static cornering light 77005 Diesel particulate filter 36205 Left sliding door to cargo/passenger area 36209 Sliding doors left and right to cargo/passenger area 20405 Mud flaps front and rear 33105 Cabin seats: single passenger seat, 2-way adjustable 32100 Cabin seats: comfort driver’s seat (hydraulic) 35301 Central locking with remote control Subject to typographical errors, mistakes, and prior sale. No safety-relevant defects are known on the vehicle. The vehicle has been inspected according to applicable regulations. All details in this offer have been carefully checked but are non-binding. Subject to change, error, and prior sale. Sale excludes any and all warranty. No accident damage is known or has been checked for.

Condition: ready for operation (used), Bosch PU 401 servo positioning unit. , used, good condition, 100% functional Pgsdpoi D Ubzjfx Aa Iju

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 200 mm, mast type: standard, construction height: 1,210 mm, fork length: 1,150 mm, empty load weight: 68 kg, total length: 1,500 mm, drive type: Handbetrieb, construction width: 540 mm, Hand pallet truck Fork width: 155 mm Fork thickness: 50 mm Mast type: none Condition: New device Technical condition: New Front tires type: Polyurethane Front tires condition: New Rear tires type: Polyurethane Rear tires condition: New Description: Controlled lowering of heavy loads, low-maintenance hydraulic unit made of steel, rounded fork tips for greater safety and comfort when entering the pallet, hard-chromed piston rod and overload valve, steering and load rollers are ball-bearing mounted for smooth running even under load, state-of-the-art manufacturing technology and quality control ensure maximum operational safety and low maintenance costs. Pgjdpfxjxgl A Ie Aa Ieu

Condition: used, HERBOLD PU800 pulverizers Pjdpfx Ajxgtf Rja Iegu Suitable for soft to medium-hard materials Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Drive motor: 90 kw

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: Flowpack, - short delivery time, less than 10 weeks! - Model name: Rotection PU flow-wrapping machine Features: Steel frame/stainless steel construction, Fixing of the unwinder by hand without compressed air, Automatic roller centering for precise application, Automatic stop for empty products (no product - no bag), Simple touchscreen operation via color symbols Continuous feeding of products via sensor control, pressure mark sensor included, safety covers 3-sided welded seam packaging (fin seam), longitudinal sealing on the underside of the bag, rotating transverse sealing system Can be combined with upstream and downstream machines, Customer-specific modifications / designs on request Pgedpfx Aaoq Ikfme Iou Additional options (on request and at extra cost): Thermal transfer printer, e.g. best-before date, print width up to 60 mm, stainless steel finish/lacquering, cooling applications for ice cream packaging, zig-zag knife, Euro hole punch etc., applications for shrink films (flow shrink), gas flushing units for protective atmosphere (extend product shelf life), automatic product feed systems, intermittent insertion systems, perforation units (tear strip) for easy opening, length-dependent product processing by photocell scanning Horizontal production orientation Conveyor system either chain conveyor or belt conveyor, length as required Film feed from below Flexible and fixed forming shoulder Operator display 10" touchscreen with memory functions, swivel arm for convenient operator handling Drives & control 8 servo motors and PLC control Packaging length 120-600 mm Packaging width 70-250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25-100 bags/min Film width 200-600 mm Consumption approx. 7 KW Power supply 220-240 V / 50 Hz / 1-phase Machine weight approx. 1000 kg Machine dimensions approx. 5230 x 1380 x 1460 mm System material 304 stainless steel Pressure mark sensor Yes External compressed air required Yes Printer holder at extra charge Delivery time Current delivery time less than 10 weeks

Condition: excellent (used), Lennox PU-06D L02 Condenser Pjdsqqiykepfx Aa Isgu Neostar range, Twin fan system, with Tecnac liquid receiver

Condition: ready for operation (used), Siemens 7ND3523-1BD31-1NA1 Sirec PU dot recorder, E version and serial number as per photo, used, normal signs of use, 100% fully functional, scope of delivery as shown in the photos. Pgedpfxjxahkho Aa Iou

Condition: used, The Herbold PU 500 pulverizer is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Psdpfxsxgrqfo Aa Isgu Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: ready for operation (used), Siemens 7ND3523-1AD31-1NA1 SIREC PU dot recorder, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as shown in photos Pgedpfexahkbox Aa Ieu