Used Schechtl Ras Ks Und Ras for sale (7,812)

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Psdpfx Aet E Nw Tjf Rsgp Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Pgodpfoy Rf T Rox Af Rep Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min Pgedpfx Afsyv N I As Rop cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° Pgedpfxeyv Nn As Af Rop table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: good (used), sheet width 2000 mm plate thickness 2,25 mm distance between columns 2040 mm total power requirement 7,5 kW Pjdpfx Asul Ei Esf Rjgp weight of the machine ca. 1,5 t dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Condition: used, functionality: fully functional, Year of construction: 1988, Schechtl guillotine shear With signs of use, but operates flawlessly Pgedpjy I Uulsfx Af Rop

Condition: ready for operation (used), Max. working width: 3060 mm For sheets (at 40 kg strength) up to: 4 mm Min. bending radius: sheet thickness x 1.25 Min. inside flange height: sheet thickness x 6 Pjdsxwnltjpfx Af Regp Upper beam opening width: 220 mm Lower/bending beam adjustability: 90 mm Max. bending angle: 180° Stroke speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Required space: 4150 x 1800 x 2500 mm

Condition: ready for operation (used), Year of construction: 1951, Large working width: 1250 mm for sheets up to: 1.75 mm opening width of upper beam: 70 mm adjustability of bending beam: 50 mm Psdpfx Ajv D E R Dsf Rsgp space required: 1880 x 740 x 1140 mm

Condition: used, functionality: fully functional, RAS guillotine shear in good condition available. The machine can still be inspected under power. It was used exclusively for thin sheet metal. Price on request. Pgsdpfxjy Ry E Io Af Rop

Condition: good (used), Various quick-change tool holders, total of 42 pcs: 7 pcs WDL 4/50 16 pcs WDR 4/40 10 pcs WDL 4/40 3 pcs WB 4/60⌀ Pgjdpfxoy N S Ifo Af Rjp 3 pcs WBW 4/60⌀ 1 pc WBW 23/60⌀ 2 pcs without type Please let us know which items you are interested in so that we can provide you with an offer.

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Pgodjv Tk Exopfx Af Rop Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Pgodox Hyhbepfx Af Rsp Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm Pgsdowf Hghjpfx Af Rop • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: new, functionality: fully functional, Year of construction: 2026, Technical specifications: Working length: 4040 mm Overall length: 4858 mm Depth: 2592 mm Working height: 920 mm Total height: 1430 mm Pedpfx Afjx Hykvj Rsgp Weight: 3450 kg Maximum cutting thickness: Steel: 2.5 mm Aluminum: 4.00 mm Stainless steel: 1.5 mm Standard equipment: ▪ Mechanical backgauge, range 0 - 750 mm, with pneumatic sheet support system; front or rear material discharge ▪ Required compressed air connection: minimum 6 bar ▪ 4 front support arms, 1000 mm, with T-slot and metric scale ▪ 2 front sheet supports, square bar type, positioned on the left and right sides of the machine, with T-slot and metric scale ▪ Blade clearance adjustment with scale ▪ Controller with digital readout (memory for 99 six-step programs) ▪ Rigid welded steel frame. Maintenance-free linear guides and bearings. ▪ Foot switch ▪ CE certificate NEW! Option to install a conical backgauge Advantages: Fast return stroke, high cutting capacity Rigid welded steel frame Maintenance-free linear guides and bearings.

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • maximum free space for material bending thanks to the F-geometry for the bending beam Pgodslbilvepfx Af Rjp • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/100 mm and 24/100 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: new, Year of construction: 2026, Quick reverse movement, high cutting capacity with low power Strong steel welded frame structure Maintenance-free guides and bearings. Operating pedal, safety buttons Front material support up to 920 mm 5m 32Amp cable to power the machine CE certificate Pedpsl Exypofx Af Regp Automatic stop with digital position readout, length 0 - 750 mm with pneumatic sheet support system with rear material pick-up compressed air connection required min. 6 bar

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/68 mm and 24/68 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Pgjdpfxjlbimao Af Rop Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: used, Format: 0x0 Pedsx Rh D Sepfx Af Rjgp Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Manufacturer: Speidel Tank and Vessel Construction Year of manufacture: 2020 Technical specifications: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket/insulation jacket) Internal surface: suitable for food/pharmaceutical use Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Legs: height adjustable Application: The tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP vessel in a pharmaceutical facility and was operated under hygienic conditions accordingly. Typical applications include: - Intermediate storage of bulk goods - CIP feed tank - Storage of alcohol, cleaning, or disinfectant solutions - Process integration in filling lines Construction: Pgodpsy I Skwsfx Af Rop - Premium stainless steel construction (316L) - Insulated tank for temperature-controlled processes - Hygienic design with clamp fittings - Conical bottom for complete residue drainage - Industrial-grade build from German manufacturer Speidel Condition: - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operation manual available - Manufacturer documentation included Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operation manual - Nameplate present Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as a CIP feed or buffer tank - Compact design with high quality

Condition: refurbished (used), Year of construction: 2010, XXL-Center RAS 75.06 - General technical data in mm: Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Pgsdpfx Asx Hf Tvof Rjp Gripper claws travel range: 10 – 750 mm Clearance in front of the jaws up to: 300 ° Extendable loading tables: yes Gripper claws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor-driven; 400V, 50/60 Hz, 3-phase Year of manufacture: 2010 Condition: Will be completely overhauled - Images are examples -

Condition: like new (used), Number: 30206550 Operating hours: 4,686 h Performance: Internal dimensions: Pgsdpsi Ra Tgsfx Af Rep Dimensions: 1,300 x 900 x 1,450 mm Height with frame: 2,100 mm Weight:

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 52/10, working width: 3,200 mm, sheet thickness (max.): 3 mm, empty load weight: 4,400 kg, TECHNICAL DETAILS Sheet width: 3,200 mm Sheet thickness: 3 mm Opening width of the upper beam: 300 mm MACHINE DETAILS Motor power: 4.5 kW Pgsdpfsxyv Iujx Af Rop Dimensions & Weight Space requirements: approx. 4,300 x 2,300 x 1,750 mm Machine weight: approx. 4,400 kg EQUIPMENT Segmented pointed rail Segmented gooseneck tool

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, working width: 4,060 mm, sheet thickness (max.): 2 mm, empty load weight: 5,500 kg, stroke length: 300 mm, TECHNICAL DETAILS Sheet width: 4,060 mm Sheet thickness: 2.5 mm Stroke: 300 mm Backgauge length: 10 - 1,550 mm Podpfxoxxrmqe Af Regp MACHINE DETAILS Total power requirement: 3 kW Machine weight: approx. 5,500 kg

Condition: excellent (used), Stone cutting saw with diamond blade Pjdow Evznopfx Af Rogp

Condition: used, Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motor-controlled backgauge with folding cams up to 2500 mm with stop extension (disassembled) Podpfx Aoxl Dt Nsf Regp Motorized bending beam adjustment Multibend 9001 control Segmented upper beam tool with automatic tool clamping (height 100 mm) operation manual Weight: 5800 kg