Folding machine

RAS 71.30

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute Dedpfx Agowtdk Te Roul - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 5 mm, Hydraulic swivel bending machine Manufacturer: HOCHSTRATE Type: 3000/5 Year of manufacture: 1998 Technical data Manufacturer: HOCHSTRATE Type: 3000 x 5 Year of manufacture: 1998 Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm2) Motor power: 7.5 kW Space required: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment • PLC control • Bending rail 30 mm Duodpfx Aovrxnxjg Rel All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, functionality: fully functional, power: 183.87 kW (249.99 HP), first registration: 11/2011, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: red, gearing type: mechanical, number of seats: 9, From our immediately available stock of used vehicles, we offer you: Firefighting Group Vehicle LF 10 ALL-WHEEL DRIVE 4x4 on IVECO FF110E25 The LF 10 is the standard firefighting group vehicle for rural areas and small towns. It is suitable for both firefighting operations and technical rescue missions. Thanks to its off-road tires and all-wheel drive, our vehicle is also suitable for use in difficult terrain. General Data: • First registration: 11/2011 • Mileage: approx. 8,400 km • Unladen weight: 8,065 kg • Permissible total weight: 11,500 kg • Last service: 06/2025 • Next general inspection (TÜV): 10/2027 Chassis: • IVECO FF110E25 4x4 with 250 HP (185 kW) • 6-speed manual transmission • Single tires with matched track for maximum off-road capability Cab: • Standard crew cab (1:8 configuration) in RAL 3000 (fire red) • Mounts for 2 breathing apparatus, rear-facing Bodywork: • Manufacturer: Magirus Dusdsx Nbmqspfx Ag Rsl • LF10 bodywork built to DIN specification • Three spacious side equipment compartments on each side • Fold-out steps for front and rear side equipment compartments • Mounts for standard equipment • Storage for portable fire pump • Mounts for 2 additional breathing apparatus Vehicle Pump / Extinguishing Agent Tank: • Magirus FPN 1000-10 centifugal fire pump • Output: 1,000 l/min at 10 bar • Water tank: 1,000 l • Storage for 6 x 20 liters foam agent in canisters in compartment G6 Firefighting Equipment: • Rigid rapid attack hose, 50 m length, mounted on top of G6 Safety and Lighting: • Perimeter lighting on bodywork • Pneumatic light mast available on request We will gladly prepare a specific offer for you and present the vehicle to you in detail at our location in Berlin. All information has been provided to the best of our knowledge and belief and is without guarantee for completeness or accuracy. This advertisement is for information purposes only and does not constitute an offer. Subject to prior sale!

Condition: ready for operation (used), Year of construction: 1984, sheet width 3040 mm plate thickness 4 mm Dusdpfxjxwzbbs Ag Rol distance between columns 3040 mm stroke of upper beam 200 mm adjustment of lower and bend clamping 100 mm total power requirement 6,4/3 kW weight of the machine ca. 6,3 t dimensions of the machine ca. 4,3 x 1,2 x 1,8 m Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as overload protection, bending angle adjustment via potentiometer, operating modes: individual switching for each work step by hand switch, SEGMENTED TOP RAIL 120 mm height (Photo 7).Please notice that such a machine now costs about €70.000,--. As usual, the sheet thickness is based on a strength of 40 kg / mm². Machine dealer with own stock of 2500 m².

Condition: good (used), functionality: fully functional, Year of construction: 1990, This high-performance RAS 67.30 folding machine with single-program control is from first ownership. Bending capacity: 3200 x 2.5 mm Drive power: 3 kW Dedexmi Hdspfx Ag Rsul Machine weight: 3,800 kg Including pre-selection of bending angle via rotary potentiometer, second foot switch for two-person operation, continuous 45° upper folding beam, segmented/split and raised upper folding beam Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1997, sheet width 3020 mm plate thickness 4.0 mm Opening width / upper beam 350 mm Adjustment folding beam 100 mm adjustment of lower beam 80.0 mm bending angle max. 130 ° work height max. 900 mm Dusdpfoxacgkjx Ag Rjl Control SIEMENS OP 7 voltage 400 V total power requirement 9.5 kW weight 5400 kg range L-W-H 4300 x 2400 x 1780 mm Furnishing: - SIEMENS - PLC control model OP 7 * Bending process as a controlled, fully automatic, or semi-automatic workflow can be selected * Bending angle adjustment electronically preselectable 0-135 ° - electr. / controlled backgauge X = 1000 mm * with large sheet metal support surface - heavy welded construction - all drives both. via worm gear - Motorized adjustment of the bending beam - large adjustment range of the cheeks - hydraulic upper tool clamping - Insert / bending tools - Operation manual * Special accessories included: - separate split goat foot splint H 170 mm * Machine video: - ?v=C3rwhUDtOKw

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Dodpfx Aox Av Uajg Rsul

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Dodpfx Ageucitzj Rsul Motor: 7,5 CV Overall dimensions Lenght: 1000 mm Width: 2000 mm Height: 1700 mm

Condition: ready for operation (used), Year of construction: 1996, For sale: the conveyor belt shown in the photo. Please feel free to contact me for further information. Dsdpfx Aevb Ilfog Reul

Condition: used, Year of construction: 1959, sheet width 2040 mm Dusdjx Hp Auopfx Ag Rol plate thickness 3,0 mm distance between columns 2060 mm adjustment of lower beam 110 mm stroke of upper beam 270 mm total power requirement 7,5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 3,1 x 1,5 x 1,5 m