Used Sheet Metal Folding Machine for sale (69,582)

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch Godpfxjw Dp Eko Ap Dekc * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard PAINTING: * Colour in RAL 5011 & RAL 7036 * Epoxy paint is used to ensure long-lasting coating durability.

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Technical data: Year of manufacture: 2007 Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Gkedpfjzy Uvkox Ap Dsc Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Automatic sheet metal winding Sheet metal cutting to a specified length Automatic roll packing process with stretch film Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Gkodpfxjzibwge Ap Djc Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: M704025, sheet thickness (max.): 100 mm, overall weight: 4,650 kg, passage width: 1,300 mm, TECHNICAL DETAILS Unit: 1 x rotating sanding belt, brush belt Table: 2 movable tables with rubber belt/conveyor belt Material thickness: 0.8 to 100 mm Passage width: max. 1,300 mm Workpiece dimensions: min. 180 x 100 mm Workpiece weight: max. 250 kg/m Feed rate: 0.2 to 6 m/min MACHINE DETAILS Godpfjzkr Rtjx Ap Djkc Operating hours: approx. 1,500 h Dimensions & Weight Dimensions: 2,200 x 2,900 x 2,200 mm Machine weight: approx. 4,650 kg EQUIPMENT Processing: on both sides, dry

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, Sheet metal cleaning machine Jeros 5015/828 for 2-edge sheet metal short side raised Gkedpfx Asyaklcop Djc stainless steel design with oiling function DGUV V3 certified – available only from us Connection: 400V, 16A-CEE plug Used machine Come and visit us!

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RYW 800 EU – Deburring & Edge Rounding Machine The ADV 508 RYW 800 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide grinding belt, rotating brushes and disc brushes allows efficient processing of both outside contours, inside contours and holes. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 800 mm working width Deburring, edge rounding and surface finishing Wide belt grinding unit for burr removal 4 rotating brushes for multidirectional processing 7 disc brushes for edge rounding of contours and holes Suitable for steel, stainless steel and aluminium Vacuum and magnetic workpiece holding Servo-controlled height adjustment Siemens / Delta PLC control Touchscreen HMI Technical Specifications Model: ADV 508 RYW 800 EU Working width: 800 mm Material thickness: 0.5–100 mm Minimum workpiece: 50 × 50 mm vacuum / 30 × 30 mm magnetic Feed speed: 0.5–7 m/min Grinding belt: 2,000 × 820 mm Grinding belt motor: 15 kW Grinding belt speed: 0–15 m/s Rotating brushes: 4 × Ø300 × 300 × 40 mm Rotating brush motors: 2 × 2.2 kW Disc brushes: 7 pcs. Disc brush motors: 7 × 1.1 kW Disc brush speed: 0–24 r/s Disc brush oscillation: 0–30 mm adjustable Vacuum pump: 15 kW Gkedpfjzwqwfex Ap Djc Height adjustment: Servo-controlled Control: Siemens / Delta PLC Operating panel: Touchscreen HMI Power supply: 3~ 380 V / 50 Hz Complete Finishing in One Pass The wide grinding belt removes heavier burrs and prepares the surface. The rotating and disc brushes subsequently process the workpiece from multiple directions, providing consistent edge rounding on external contours, internal contours and holes. This makes the RYW configuration particularly suitable for companies processing a wide variety of complex sheet metal components where consistent and reproducible finishing is required. Service & Availability The ADV 508 RYW 800 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Gkedpfx Apjwzv E Ee Dsc Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Bending machine from the only and reliable manufacturer PROD MASZ® High-precision folding machine for steel, copper, zinc and aluminum sheets. These press brakes and all common spare parts are available from stock. Folding bench RED-2200/0.8 incl. transport rollers Bending machine Folding bench with side cutouts for bending from top to bottom. Thanks to him you will finish your window sill. In the machine construction there is a place for curved processing at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: Gjdpfxecv S Dto Ap Djkc - maximum working width: 2080 mm - Bending performance: up to 0.8 mm (steel sheet) - all non-ferrous metals 30% more bending capacity - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 m - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 250 kg The roller scissors (max. cutting capacity 0.8 mm / steel) Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee. Price: 2200 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: refurbished (used), Year of construction: 2022, -Pre-owned Surfacer Series TFON RB-2510 (M) -This TFON RB-2510 is a reliable, well-maintained pre-owned machine, ready for immediate use. Gkodpfsiih Aaex Ap Djc --Previously utilized exclusively in our inhouse production for deburring and edge rounding applications, this unit remains in excellent working condition and is fully operational. It has proven its reliability and durability, making it a strong choice for long-term use in your production line.

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. Gksdjyt Nhvjpfx Ap Dec The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.

Condition: used, Year of construction: 2022, 2 x 400 mm magnetic track, EMZR (presumably an abbreviation, context needed for accurate translation), Tool wear compensation EE Gkjdpfx Ajzd Nwdjp Doc

Condition: used, Year of construction: 2008, working width: 800 mm, Grinding machines TimeSavers are designed for surface processing of parts up to 800 mm wide. Product fixation - vacuum. The machine is equipped with 2 stations: abrasive belt / brush. The equipment is suitable for grinding, edge rounding, oxidation and slag removal, final grinding. Technical specification: Model: Timesavers 41 series 900 WRD Year: 2008 Max. part width: 900 mm Max. part height: 80 mm Min. part height: 15 mm Speed: 1 - 10 m / min (adjustable) Gkedpfxevyhtte Ap Dsc CNC controller: adjustable speed, part dimensions, grinding pressure and more. Other: heater, can work in cold conditions If you have more questions, we will be happy to answer.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 630 EU – Deburring & Edge Rounding Machine The ADV 508 RW 630 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. Gkedpfxjzwqv Ue Ap Dsc The combination of a wide belt grinding unit and rotating brushes provides efficient burr removal and consistent edge rounding in a single process. Suitable for steel, stainless steel and aluminium. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 630 mm working width Wide belt grinding unit for burr removal 4 rotating brushes for multidirectional edge rounding Vacuum and magnetic worktable Suitable for steel, stainless steel and aluminium Variable feed speed Siemens / Delta PLC control Large 21" touchscreen Technical Specifications Model: ADV 508 RW 630 EU Working width: 630 mm Material thickness: 0.5–100 mm Minimum workpiece: 50 × 50 mm vacuum / 30 × 30 mm magnetic Feed speed: 0.5–7 m/min Grinding belt: 1,900 × 650 mm Grinding belt motor: 11 kW Rotating brushes: 4 × Ø250 × 300 × 40 mm Brush motors: 2 × 2.2 kW Disc brushes: 5 pcs. Disc brush motors: 5 × 1.1 kW Vacuum pump: 7.5 kW Conveyor drive: 1.5 kW Worktable: Vacuum + magnetic Control: Siemens / Delta PLC Operating panel: 21" touchscreen Power supply: 3~ 380 V / 50 Hz Efficient Deburring & Edge Rounding The wide grinding belt efficiently removes burrs and prepares the surface. The rotating brush system then processes the workpiece from multiple directions, creating consistent edge rounding on outside contours. The combined vacuum and magnetic table provides reliable workpiece holding for both magnetic and non-magnetic materials. Service & Availability The ADV 508 RW 630 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RW 1000 EU – Deburring & Edge Rounding Machine The ADV 508 RW 1000 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. With a 1,000 mm working width, wide belt grinding unit and 6 rotating brushes, the machine provides consistent processing of outside contours and reproducible results on steel, stainless steel and aluminium. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 1,000 mm working width Wide belt grinding unit for efficient burr removal 6 rotating brushes for multidirectional edge rounding Vacuum and magnetic worktable Suitable for steel, stainless steel and aluminium Frequency-controlled drives Siemens / Delta PLC control Large 21" touchscreen High-quality European industrial components CE certified Technical Specifications Model: ADV 508 RW 1000 EU Working width: 1,000 mm Material thickness: 0.5–100 mm Grinding system: Wide belt grinding unit Rotating brushes: 6 pcs. Worktable: Vacuum + magnetic Control: Siemens / Delta PLC Operating panel: 21" touchscreen Drives: Frequency controlled Power supply: 400 V / 50 Hz Certification: CE Efficient Deburring & Edge Rounding Gkjdpfozwqwrjx Ap Djc The wide grinding belt efficiently removes burrs and prepares the surface. The six rotating brushes subsequently process the workpiece from multiple directions for consistent edge rounding. The combined vacuum and magnetic table provides reliable workpiece holding for both magnetic and non-magnetic materials. Service & Availability The ADV 508 RW 1000 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 47800, Offer 26308 Gjdpoz Ndu Sjfx Ap Dskc Technical specifications: - Maximum working width: 3040 mm - Maximum material thickness at 40 kp/mm² tensile strength: 2 mm - Electronic adjustment of bending angle: 0 - 180° - Automatic sequential control for a complete working process - Maximum upper die setting: 250 mm - Maximum opening width/stroke of the upper die: 350 mm - Height adjustment: - Upper die: 30 mm - Lower die: 90 mm - Upper die drive: 400 V / 1.5 kW - Lower die drive: 400 V / 4.0 kW - Space requirement: approx. W 4450 x H 1650 x D 2100 mm - Weight: approx. 3900 kg - Includes: - Point rail + lower die rail - E-foot switch

Condition: like new (used), Year of construction: 2024, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only been used as a test model and is therefore in excellent condition. You are always welcome to visit our showroom in Bergeijk to take a look. 2024 Deburring and Finishing Machine F200 XL with vacuum support. Suitable for deburring, rounding, and/or grinding steel cut parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. All products, from a euro coin to 200 mm wide, can be processed on this small but powerful machine. At the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by two oscillating cup brushes that apply light pressure. The brushes ensure a uniform rounding of all edges and holes, both around and within the flat-ground product, leading to the most optimal finish. The F200 XL offers options for automatic brush calibration, which ensures constant consistency and precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, manufactured in 2024, which can optionally be combined with a WES3000 wet-dust extraction unit and associated piping. Available only until it is sold. The machine is supplied with a 1-year warranty, excluding wear parts. Delivery is ex works Bergeijk. If desired, we can also offer the machine including transport, installation, and training of your operators on-site. We also have a lightly used F200 XL machine with magnetic product fixation available, manufactured in 2023. This machine can be viewed in the showroom in the Netherlands. Contact us, and we will send you an interesting offer. Gkodpfx Apjyt I U Us Djc

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,100 mm, power: 19 kW (25.83 HP), DM1100 DC EVO Removal of solid slag Edge rounding up to 1100mm width. DM1100 DC EVO deburrs and rounds inside and outside contours of thick steel parts, mainly cut with plasma or oxyfuel. The DM1100 DC is equipped with a large deburring roller for removing heavy burrs and two counter-rotating cross belts. These ensure that the edges are rounded with even and soft edges. This machine impresses with a vertically movable sanding roller to compensate for tolerances and a wide magnetic range to ensure that even small parts can be processed safely. DM1100 DC Working capacity (mm) 1100x120 No. sanding rollers (D) 1 No. of cross belt stations (C) 1 Sanding drum specifications Ø435mm 20SH Sanding belt, dimensions (mm) 1150x1520 Sanding drum speed (rpm) 185-650 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.5-4.0 Sanding drum motor (kW) 11 Gksdpfstzkg Uex Ap Doc Cross belt motor (kW) (2x) 3 Feed motor (kW) 0.37 Total power (kW) 19 Rod suction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2258x2900x2220 Weight (kg) 4100

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0312101, working width: 550 mm, overall weight: 3,000 kg, power: 32 kW (43.51 HP), TECHNICAL DETAILS Number of stations: 1 Station type: Belt grinding Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Control system: Conventional Machining process: Dry Gkodpfx Apozrmqqj Doc Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Dry weight: 3,000 kg Shipping packages: 2 EQUIPMENT CE marking

Condition: new, Year of construction: 2026, "Prod-Masz" your partner when it comes to bending. Our name stands for innovative products of the highest quality and reliability. Our bending machines impress with their particular flexibility, performance and versatility. Folding beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cutouts to the side 60mm / 45 ° recess Gksdpfx Ascv S H Ajp Doc Price: 5100.00 EUR rotary shears + 350 Euro Delivery date: every week We are looking forward to your contact! The invoices are issued either with 0% of VAT as intra-Community delivery.

Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Purification System -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially. Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements. Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces. Surface Purification: Gedpfx Apshq A T Us Dekc Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing. Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface. Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine. -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm. -Minimum Material Length: 145 mm. -Quick Change System for Straightening Rollers: Standard. -Flattening Gap Adjustment: Servo Hydraulic with PLC Control -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm Gsdpfokyrphjx Ap Djkc -Total Weight: 40.000 kg..

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Gsdpedad Adefx Ap Dskc Only shipping is possible Delivery every week Price excl. shipping We provide invoices with 0% of tax.

Condition: new, Year of construction: 2026, High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge. With this foot swivel bending machine you can bend the sheet from three sides. In the machine construction there is a space of 6 cm up and down for curved processing. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width Gkodpfxec Nxwho Ap Dsc - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shear (max. Cutting capacity 0.8 mm / steel) + 350 euros The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We are looking forward to your contact!

Condition: new, Year of construction: 2026, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) Gksdpfx Aec Ikrqjp Doc the maximum working length 2140 mm the thickness of the steel sheet up to 1.5 mm non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) cut throughout the working length a table for supporting the rear plate gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions maximum ground clearance of 100 mm between the beams

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-125 WORKING LENGTH 1250 MM ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -0,7 MM Gkedehy El Sepfx Ap Dsc DEVICE WEIGHT 125 KG.