Used Tooling Press for sale (44,947)

Condition: used, Year of construction: 2013, Manufacturer: HSM Type: HL 4010 Li Njdpfx Abjzxzxco Uswl Year of manufacture: 2013 Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Nwsdpfjzxzv Ujx Ab Usl Year of manufacture: 2015 Pressing force: 40 t

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: Eco Ring Rotor (for reduced energy consumption) Options: Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction lumber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 11 kW; 400 V - 50 Hz - 3 phase, Knives: multi-reversible, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Hydraulically operated slide, Screen size optional (10 - 40mm), Suction nozzle Ø 160 mm, Nedod Db N Ijpfx Ab Uswl Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (dry basis). Standard included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idling • Removable suction channel • Speed 70 - 100 RPM for higher throughput • Cycle control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-belt magnet + €5,980 net - Control for conveyor belt and over-belt magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, neu ca. 6-8 Wochen ab Auftrag Türkei 8800 € 169.84 € 120 to horizontal verschiebbar 400 mm 900 mm 1200 mm 5,8 mm/s 9.5 mm/s 1200 x 400 mm 4 kW Nedpfxjwiqzdo Ab Ujwl 1900 mm 1000 mm 2450 mm 1250 kg with horizontally sliding cylinder motorhydraulic with additional hand pump Height adjustable table Oil Pressure manometer OPTIONS (PRICES ON REQUEST): Handwheel and fixingbolt for cylinderadjustment 1 pair of V-block

Condition: used, Second-hand machine Fittings drilling machine Pot-hole band drilling machine, fitting drill (Grass drilling pattern) 6 drilling spindles in a row (32 mm pitch) (one spindle on the 8-spindle drill head is defective) Nwsdpszlbrcsfx Ab Ujl 4 additional drilling spindles positioned upstream for counterbore drilling Pneumatic hold-down devices, depth stop adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: at short notice Storage location: Flörsheim

Condition: used, HSK 80A type tool holders together with cabinet Nwedpfxjzza E Hj Ab Ujl 94 pieces, different types as per photos

Condition: used, Used machine Njdpfx Abozyy Apo Uswl Equipment and technical data:

Condition: used, Pressing screw REG-MAC Nedpezy Hhlsfx Ab Uowl for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 364, Ice cream cones making machine, make COMACO Alimentare, model UNIRUS UR2, MFG: 2018, SN: 364, amperage 25A; power supply 380V, the consumption is 9 Kw, frequency: 50/60 Hz; the machine has a mould with 2 rows, with 7 cavities in each row, the total amount of rows in the mould are 14. The max diameter of the cone measured in mm is 80. Nsdex Dzifopfx Ab Uswl The production average productivity with cycle of 2 minutes and temperature of 45 C⁰ is 420 cones. The production average productivity with cycle of 1 minutes and temperature of 45 C⁰ is 480 cones. Semi-automatic machine with inter changeable molds for making ice cream cones. The machine make’s cups and double cones of various size and capacities. The mould is opening and closed by hand. The moulds are field through a special feed device. Heating is made be electric supply 380V. The cones are automatically ejected into a container at the bottom of the machine when the lower mould is operated. Temperature control is automatic: the machine maintain the preset temperature until as signal (visual and audible) indicates the end of the cooking time. Price: 11.400 Euro + VAT, negotiable; Incoterms condition 2025, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten/Subject to errors, changes and prior sale/

Condition: good (used), Year of construction: 2005, functionality: fully functional, Press force: 400 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: CYBELEC ModEva 10 S Njdpfxey Ew E Is Ab Uewl Total power requirement: 47 kW Machine weight: approx. 30,400 kg Space requirement: approx. 6000x3000x3450 mm Accessories/Equipment: - 2 bending aids in front of the machine - 2 controlled stop fingers - 1 manually adjustable stop finger - Light curtain in front of the machine - Control system: CYBELEC ModEva 10 S - Parking space on the right for the bending aid - Die shifting - Tool holder on the top and bottom, EHT pneumatic - Crowning - Pneumatic tool shifting - Foot switch - Side protective doors - Controlled axes: Y1 - Y2 - R - Z1 - Z2 - inclination

Condition: used, Year of construction: 1984, x-travel 300 mm y-travel 160 mm z-travel 340 mm spindle taper ISO 40 digital readout 3 Achsen HEIDENHAIN spindle turning speed range 40 - 2000 U/min quill stroke 60 mm feeds -stepless- 5 - 500 mm/min table-size 600 x 210 mm rapid traverse 1200 mm/min power capacity 1,6 - 2,0 kW table load 200 kg voltage 400 V Nwodpfozz S Dujx Ab Uol weight of the machine ca. 800 kg dimensions of the machine ca. 1,15 x 1,15 x 1,65 m electric cabinet 0,60 x 0,35 x 0,90 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serialä-No.: 2102-2445 - 3-axis active digital display HEIDENHAIN TNC 116 - Rapid traverse - Machine light

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling HILMA - TYP 125 MACH-ID 9714 Make: HILMA Nedoz Arhiepfx Ab Uewl Type: TYP 125 Length:430mm Width:130mm Height:125mm Weight:32kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, machine/vehicle number: H 28 16 0401, KP13 Üretim Markası: ALES PRES H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 2017 Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Nwodpfxjzxq Tce Ab Uol Güç (KW) : 75 Kapladığı Alan (m2) : 108,16 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 377 cm x 160 cm Alt Tabla Ebatları : 350 cm x 160 cm Pres Yükseklik : 6,5 m Pres En : 5,2 m Pres Genişlik: 3,2 m Dakikadaki Vuruş Sayısı : 70 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Coiltech used

Condition: used, Year of construction: 2002, Manufacturer: ROVETTA Model: S4-2000 Year: 2002 Condition: Used Stock number: 0372 Press capacity: 2,000 tons Number of slide points: 4 Slide stroke: 1,000 mm Die space between platens: Min. 1,150 mm, Max. 1,650 mm Slide adjustment: 500 mm Table size: 4,500 x 2,300 mm Moving bolster: Yes Nsdpexbcnwjfx Ab Uewl Cushion in bed: Yes Blankholder cushion total force: 400 tons Lower blankholder stroke: 300 mm

Condition: repair required (used), Year of construction: 1972, Manufacturer WEINGARTEN Model VK.1250.46.76 Condition Used Warehouse number cod.323 Nwedpfsvm Eifsx Ab Uol Structure Double upright Used press Thrust: 1,250 ton. Thrust points n°4 Plunger kinematics Slide stroke 762 mm. VERTICAL LIGHT from the mold holder, CBRA 1,530 mm. Slide - registration 610 mm. Mold holder surface size 4,460 x 2,400 mm. Extractable carriage n°2 lateral exit (possible mold of 5,000 mm) Mold holder surface height 400 mm. Number of strokes/min 8/18 Front useful passage 4,400 mm. Sheet metal passage in the upright 2,400 mm. Hydraulic safety Present

Year of construction: 2006, condition: excellent (used), Manufacturer NEW OMEC Model PO/2M/P Excellent Condition Stock No.302 Sled power 400 ton. Nwodpfx Asn Uwl Heb Ujl Slide stroke 1,500 mm. Mold clearance between platens 2,500 mm. Mold table size 4,000 x 2,480 mm. Pushing points No. 2

Condition: excellent (used), Ice cream press, shaper, spaghetti ice cream press, ice cream press cup Nwedec H S D Ispfx Ab Uol -made of stainless steel tube: Ø 79 mm -Shape: Spaghetti 42 pieces available -Holes: Ø 3 mm -Shape: wide pasta, tagliatelle, lasagne, 24 pieces available -Slot: 4 x 49 mm -Price per piece -External dimensions: 160/79/H78 mm -Weight: 0.45kg

Condition: used, Year of construction: 1970, functionality: fully functional, pressing force: 100 t, overall weight: 4,000 kg, pressure 40 t stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t Nwsdpfx Abovxltbs Ujl weight je 1,5 t safety light frame ja bei beiden

Year of construction: 1997, condition: used, Bürkle Multifoiler Model BTF 1628/60 Year of manufacture: 1997 System for coating flat and shaped MDV (medium-density fiberboard) parts with thermoplastic films, either from a roll or as cut pieces, for films such as PVC, PP, high-gloss PVC, and ABS. Suitable for thermoforming or membrane pressing processes. Maximum part size: 1250 x 2550 mm Nwedpfszz Ny Tsx Ab Uol Part thickness: 6-35 mm Heating plate dimensions: 1600 x 2800 mm Maximum heating temperature: 140°C Stroke: 230 mm Control system: Siemens Total power consumption: 38 kW Includes 2 aluminum tables and a spare table Includes a PIN table Weight: 16.5 t

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, operating hours: 77,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TrumaBend V1700S / 4m bending length Year of manufacture: 2006 Nwjdpfx Abjzrnrce Uol Press force: 1700 kN (170 tons), bending length: 4080 mm Machine operating time: 77,000 hours, hydraulic operating time: 48,000 hours New IPC (KEBA 5) Configuration 1 active bending aid, 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: used, Year of construction: 2021, machine/vehicle number: 13900, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: Nsdpsz Aa Eiefx Ab Uewl - Year of construction: 2021 - Serial number: 13900 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: good (used), Code: 0478 Brand: ITALPRESSE Model: V/2 Nwedpfx Abozz Szao Usl Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Nwodezulx Espfx Ab Uol Including drawer cabinet with lots of tooling and multitool

Condition: like new (used), Year of construction: 2020, Like new press brake from Ermaksan Type: Power-Bend Pro 3100 135 Capacity: 3100 x 135 tons Delem DA56s CNC control Nwsdpfx Abezunlhj Usl Y1, Y2, and X axes CNC controlled Akas Fiessler laser safety system Amada/Euro clamping system Manual crowning Includes a set of tooling

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Nwedpjzvyg Hefx Ab Usl Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 Year of manufacture: 1998