Tryout Press - hydraulic

HIDROLIKSAN HD 120

Condition: new, pressure 120 t stroke 400 mm dayligth 900 mm 1220 mm 400 mm Cjdpfx Apeyv Ntfetsrg feed down 5,8 mm/sec feed up 9,5 mm/sec Heads 200x125 mm total power requirement 6 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1900x1000x2550 mm

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable Crsdpewrm Dtsfx Aptog >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: new, Year of construction: 2016, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Csdpfx Asgwlrdjptjrg Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Condition: good (used), Pressure vessel Cjdpog A Hc Hsfx Aptjrg 11 bar, 1500 Liter litre

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Csdpfox Ev Tkjx Apterg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure Crodpfx Apju Nc Rioteg with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: new, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1500 mm - Cylinder is movable Crsdpsilvb Njfx Aptog - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 25,000-liter storage tank for storing water and wastewater, as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer's certificate according to DIN standard and a type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 8,390 mm, Diameter: approx. 2,000 mm, Weight: approx. 4,500 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-coupling connector according to DIN can be offered as an additional option. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer cost-effective delivery on request. Inspections of our systems are possible at any time. Additional tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free of charge for loading. Delivery can be offered at a reasonable additional cost. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Cjdpec Nkyzefx Aptjrg Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Original price: over €40,000.00 Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. System in inspected condition with inspection logbook, fully functional and ready to use immediately. Crsdpfxev Uvdpe Aptjg Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers!

Condition: good (used), Year of construction: 1973, Weinig planer 4-sided / U250 / Unimat 250 planing width: 250mm Planing height: 120mm Cedpfx Asrigq Sjpterg Spindle bottom 7,5 kW Spindle right 5,5 kW Spindle left 7.5 kW Spindle right 7.5 kW Spindle top 7.5 kW Spindle bottom 7.5 kW Spindle sawing unit 7.5 kW with planing heads with milling tools with knives with all accessories good condition - available immediately Location: Austria, near Sankt Pölten