Used Tox Hydropneumatic Clinching Pliers for sale (245)

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Gbedpfxspcht Ho Aaysp

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,311 h, maximum speed: 40 km/h, Operating hours: 1311, First registration: 10/11/2022 _____ Basic equipment / technical data: max. lifting capacity 4,200 kg, max. lifting height 7,000 mm, max. outreach 3,800 mm, Length to carriage 4,730 mm, Width 2,310 mm, Height 2,530 mm / 2,590 mm (CS activated), Total weight with load forks 8,170 kg, Total weight without load forks 8,000 kg, Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, Power: 105 kW (143 hp), 2,300 rpm, Hydraulic reversing fan, Stage V, Diesel particulate filter, oxidation catalytic converter, and SCR catalytic converter with AdBlue injection (DPF + DOC + SCR), Hydrostatic drive, Pump: electronically controlled with variable flow, Motor: Swashplate motor, EPD TOP including optional automatic speed increase, Mineral hydraulic oil HVI 46, Transmission: 2 gears, electrohydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h, Cabin: Enclosed cabin, Split door, 360-degree all-round visibility, V3611 GRAMMER air-suspension seat with safety lap belt, ROPS/FOPS tested, Heater, Front, roof, and rear window wipers, Sun visor, 4x1 joystick, electronic, with capacitive release including direction of travel switch, CS = hydropneumatic vibration damping of the cabin, Telescopic boom: 2-piece with electronic end-of-stroke damping "Soft Stop", Carriage quick-change system type "ZM2", hydraulically controlled from the cabin, Steering: Hydraulic steering, 3 steering modes: All-wheel drive, front-wheel drive, crab steering, Drive: Permanent all-wheel drive, Axles: Front axle fixed, Rear axle oscillating, Braking system: Power-assisted disc brakes on all four drive axles, automatic parking brake when the engine is stopped, Frame construction: Made of high-strength steel, Hydraulic system: Pump with variable flow of type "LOAD SENSING", Flow rate work hydraulics: 150 l/min, Flow rate hydraulic fan: 46 l/min, Total flow rate: 196 l/min, Working pressure: 250 bar, Flow-sharing control block, Electrical system: 12 V, Battery: 100 Ah, Alternator: 120 A, Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shut-off, Tires: 460/70 R 24 Michelin XMCL, Standard equipment: Power brakes, Hydraulic oil cooler, Rear plate for mounting a trailer hitch, hydraulic reversing fan, Radio preparation, Work lights on the cabin (2 front, 2 rear), Preparation for additional function on the boom head, 2 hydraulic connections on the boom head, Load protection grid on the carriage, Lighting for road travel, Automatic battery main switch, Electrical connection cable in the boom, Acoustic signal when reversing, Cylinder support for securing the boom, Optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer coupling, self-locking, 30/32 mm bolt, including connection for trailer lighting, height-adjustable version is highly recommended for compact and medium models, Air conditioning, Vibration damping on the boom (B.S.S.), LED rotating beacon on the cabin roof (approval subject to local regulations) Gedpfxotu Szto Aayebp

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting Gjdpfsuycgfex Aaysbp - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: new, How does it work? The magazine is manually fed with deck boards and stringer boards, then the machine automatically organizes the decks in the right position for nailing. The machine is constructed for continuous and reliable production of pallets. It combines professional precision with a user-friendly setup. The size of the manufactured pallets can be easily readjusted in just a few minutes. Deck Size: Min / max length: 600 mm - 1 600 mm Min / max width: 600 mm - 1 400 mm Stringer Min / max length: 600 mm - 1 400 mm Min / max width: 75 mm - 150 mm Min / max thickness: 16 mm - 28 mm Min / max wing: -20mm - +50mm Deck board Min / max length: 600 mm - 1 600 mm Min / max width: 75 mm - 150 mm Min / max Thickness: 16mm - 28mm Godpfx Aowdurpoaysbp Specifications: Operators | 1 Length | 4,0 m Width I 3 m excluding platform ladder Height | 3,6 m Power | Electric: 14 kW, 3x400 V+N, Hydraulic: 22 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 400L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 24 deck boards/min Standard equipment: 2 cassettes for deck boards 3 channels for stringer feeding 3 cassettes for stringer 1 mechanical clinching plate Nailing system: Electric or hydraulic beam nailing, 1 nail box (9 nails), Individual nail picking, nail indication system, 9 nailing hammerheads Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Gsdeza Dzdepfx Aaysbp Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Year of construction: 2017, condition: ready for operation (used), Swivelling angles: 45°/90°/135°, max. speed: 2800rpm, working length: 5350mm, saw blades: 2 carbide-tipped saw blades 420x30mm, extraction connection: 160mm, compressed air connection: 6-8bar, power per motor: 2.2kW, length: 4200mm, weight: 900kg. Features: hydropneumatic saw feed, digital display, center support, handwheel, four pneumatic clamping cylinders, electrical control for parallel operation of machine and extraction system, fixed stop 24mm next to the fixed saw unit, adjustable via scale, with documentation. An on-site inspection is possible. Gbodpszaq D Eofx Aayop

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Selling a used ELUMATEC DG 79 double miter saw. The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. Gbjdpfx Asy Ulvasayep No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 350 mm, roller diameter: 90 mm, Key advantages: clinching technology without rivets – no additional fasteners required, low operating costs, fast and repeatable joining process, intuitive HMI touch screen, compact and robust design, power supply 230 V / 50 Hz, operating pressure 6 bar, easy to use and maintain, Godpfx Aaey Rrcroysbp perfect for serial and workshop production. Application: ventilation and HVAC, metal enclosures, home appliances, automotive, control cabinets, sheet metal components manufacturing. Shaft diameter: 90mm, Throat depth: 350mm, Sheet thickness range (mild steel): 2x 0.5-1.2mm, Press force: 76KN, Power supply: 230V Air pressure: 6 BAR Weight: 500kg

Condition: ready for operation (used), functionality: fully functional, Clinching machine – a device for joining sheet metal by pressing with its own material. 2 units available (price per unit). Godpfx Aaey Hmkcjyjbp

Condition: ready for operation (used), For aluminum, cutting length 6000mm Saw blade diameter maximum 450mm Swivel range: 90°- 45° pneumatic With hydropneumatic saw feed Horizontal workpiece clamping Gbsdpfx Aswvqt Hjayep Vertical workpiece clamping Fixed unit on the left, the right unit is movable Digital positioning control Roller track moving with the right saw unit

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min) 25 Gedpfxsyv Ag Ss Aayjbp Pneumatic head tilting External tilting 45° / 22° Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm) 5,000 Minimum standard cut with 2 heads at 90° (mm) 310 Blade diameter (mm) 450 Contact probe

Year of construction: 2006, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Gbsdsyybr Uspfx Aayep Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Condition: used, Year of construction: 2023, Year: 2023 - the machine was put into operation in 2024 Gjdpfx Aey Hq H Usayobp Status: very good, functional Counter: 640.000 only Configuration: - pliers size: "L" Specifications: - speed: 300 packages / h - maximum height on pallet: 1400 mm - automatic pallet switching

Condition: like new (used), Year of construction: 2026, Corner Crimping Machine WEGOMA The EV175 has an automatic positioning system according to the profile width • easy convertible and adjustable by scale Godpfjyuziusx Aayebp • dual foot pedal operation for clamping and crimping • laminated nylon support pads on table and support arms • second positioning key for special profiles and crimping tools on request • sinkable anvil, hydropneumatic • vertical clamping cylinders • weight of crimping knives easy adjustable

Year of construction: 1996, condition: used, Hydropneumatic operation Godpfxjyxpw Ne Aaysbp Punching force: 50 kN Work hub: 35 mm Overhang: 110 mm Installation height: 140 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1015, profiles with dimensions (HxB) up to 100x195mm, 80x200 mm automatic work cycle driven by a 3 kW/400 V, 2850 rpm motor cutting disc d=450x3.8x40mm, z=110 horizontal and vertical material clamping on the feed side dosing spray system horizontal material clamping in the feeder moving both clamping jaws when retracting (prevents scratching of the profile) infinitely adjustable hydropneumatic cutting disc feed cutting disc exiting from the rear length of cut sections adjustable in the range of 0-300mm (with reversing device 0-600 mm) setting the cutting length by a handwheel with a mechanical counter Godpowgmv Sefx Aaysbp maximum width of the cut profile 200 mm cutting range (height x width) 100x195mm, 80x200mm automatic shutdown when material runs out possibility of connecting a dust extractor

Year of construction: 2019, condition: excellent (used), Double-head automatic saw for cutting aluminium and PVC profiles, equipped with electronic control and pneumatic tilting of the heads. Features a virtual tilting axis for the cutting heads. Godpfowwtwqex Aayobp Cutting length: 5000 mm Control: Electronic with automatic feed of the movable head Tilting of heads: pneumatic, with adjustable angles (range 90° to 45°). Manual adjustment of heads: other angles up to 20°30'. Additional features: Hydropneumatic blade feed, profile clamping.

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Gsdpjywtqdjfx Aayjbp coolant lubrication

Condition: used, Crimping pliers for crimping cable lugs and connectors with interchangeable blades for the processing range of 10 - 120 mm² available blade inserts: 10, 35, and 70 mm² Overall length: 660 mm Godpfxscabzrj Aayebp Weight: 4.1 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg Gsdpoh I Dvnofx Aayebp

Year of construction: 2011, condition: like new (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min): 25 Pneumatic tilting of heads External tilt 45° Gsdpfx Aaox A Ar Sjyobp Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm): 4,000 Minimum standard cut at 2 heads at 90° (mm): 310 Blade diameter (mm): 450

Condition: used, Year of construction: 2001, Hydropneumatic operation Profile height: 210 mm under hold-down Gedpoyu Rztsfx Aayjbp Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. Gbsdpfx Ajyl Tr Noayop The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details.

Year of construction: 2007, condition: good (used), - Used machine - Saw blade: 400 mm Gsdpfey E Itpsx Aayjbp - Saw blade tiltable 0° left to 0° right - Hydropneumatic saw blade feed - Horizontal and vertical clamps - Motor power: 1.8 kW / 400 V - Cutting width: 242 mm - Cutting height: 140 mm - Incl. measuring roller conveyor 4000 mm - With digital readout and handwheel - Ex-stock, loaded free of charge

Condition: used, Year of construction: 1998, Hydropneumatic operation Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Godpfxsyrrddj Aayebp Weight: approx. 400 kg