Used Trailer With Chassis for sale (18,452)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Podpoi Ri Eujfx Abhspu Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,070 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 990 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with 2 interchangeable kingpins and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic stage 1, rear extension extended to stage 1: Ppedpfoi Ri R Ssx Abhsu 2 x 20-foot or 1 x 40-foot, with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended, 2nd stage: 1 x 45-foot container with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic system as a telescoping central tube frame with bolt locking mechanism with rear height adjustment and foldable center supports for containers without tunnels Container guide at the front, plug-in and removable Plug-in adapter for front locking, to secure containers without tunnels from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24-metric-ton, 2-speed support jack, single-sided operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist; operated by 3 brakes (start-up assist functions up to a 30% axle load exceedance and at speeds up to 25 km/h) Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Type Approval pursuant to EC Directive 2007/46

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions. Front locking on tipper ram mount with bilateral tapered wedges, rear locking on continuous swivel shaft with return spring. Container mounts: Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt locking. 24 ton, 2-stage support jack, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1850 mm. 2 chock blocks with holder. Half-shell mudguards with anti-splash flaps according to EC standards. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Actuation hydraulically via truck auxiliary drive. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Axle spacing offset mm (combined transport) up to 44 tons total weight. Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load reduction for easy telescoping. 2 fail-safe coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab; the truck must be pre-equipped accordingly, no truck installation. Wheels and Tires 385/65 R22.5, manufacturer's choice. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Additional LED work light at the rear, switched via reversing light. Country of Approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single-line. Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Paintwork Frame DB 7350 Novagrau (dark gray) Ppsdpfei Ri Avjx Abhju 10-year warranty against rust-through. Support legs, black coated. Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 33,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Highest fifth-wheel load on the market (20") Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, fifth-wheel, container Fine-grained steel welded construction, fifth-wheel plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic extension, 1st stage; rear extension extended, 1st stage: 2 x 20-foot or 1 x 40-foot with or without gooseneck tunnel Pedpfx Aboi Ri E Ashepu Center telescopic section, 2nd stage; rear extension extended to 2nd stage: 1 x 45-foot with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended to 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic section as a telescoping central tube frame with bolt locking mechanism Without rear height adjustment and without foldable center supports; transport of containers without a tunnel is not possible. 2 container guides, including connection plate for electrical, air, and brake connections Plug-in adapter for front locking, for securing containers without a tunnel from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24 to. 2-speed support jack, single-side operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, activated by 3 brake applications Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, 4 x 3-chamber lights + 1 round backup light and + 1 round rear fog light, yellow LED lighting on the sides 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total trailer length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Registration / License Plates Germany Type approval pursuant to EC Directive 2007/46

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel, and with rear overload capability Middle telescope as a nested central tube frame with pin locking with height adjustment at the rear and foldable center supports for containers without a tunnel Container guides, front, pluggable and removable Plug-in adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension mounted on rollers, with hand crank Ppjdpei Ri Exjfx Abhju 24 tons, 2-speed support jacks, single-sided operation Rear underrun protection, extendable for 45 ft containers Half-shell fenders with anti-splash flaps according to EG Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab; the truck must be prepared accordingly; no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: certain tractor units may experience false diagnoses, even though the function is correct) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating Instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The rear underrun protection must be manually extended. An exemption permit according to § 70 StVZo is required! Country of Registration/ Signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame, front section + rear extension, hot-dip galvanized Rear section DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 chock blocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-elliptical fenders with anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with raise/lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal for display on the dashboard in the driver's cab; the truck must be appropriately prepared; no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: with certain tractor units, false diagnoses may occur, even if the function is working) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Operating instructions Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with DEKRA approval and certificate (according to §13 EC - FGV) Pjdji Riv Njpfx Abhspu prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year guarantee against rust-through Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush with the rear, note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang Without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. Plug adapter for front locking, to secure containers without a tunnel from below, with bracket when not in use Rear extension on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underride protection Extendable underride protection for 45 ft containers Half-shell fenders, included with anti-spray flaps according to EC regulations Rear impact guard Axles and Suspension SAF disc brake axles with 430 mm disc diameter Podpoi Ri Eqjfx Abhspu Axle/chassis laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total train weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded lines for easy servicing 200 spring-loaded parking brake 2 keyed coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In some towing vehicles, false diagnoses may occur, even though the function is working) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connecting cable Operating Instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underride protection must be manually extended! An exemption permit according to § 70 StVZo is required! Registration Country/Signs Germany with DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder 390 contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized including passivation 15-year warranty against rusting Support legs black coated

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Ppedpfx Asi Rizuobhou Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Pjdpsi Ri Ayofx Abhopu

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Ppedpfxsi Riwmo Abhou Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): Ppsdpfx Abeuzv Tzsheu rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit. Psdpsyzt Nzjfx Abhopu

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Laser on time: approx. 45,500 hours Includes Loadmaster. Pedpfxozcvx Tj Abhspu

Condition: used, axle configuration: 3 axles, Year of construction: 2020, Year of manufacture: 2020 Rear axle 1: Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Steering; Tyre profile left: 50%; Tyre profile right: 44% Empty weight: 11.900 kg Carrying capacity: 36.100 kg GVW: 48.000 kg Pedjzhxa Aspfx Abhopu

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Pjdpfx Abek Radishepu Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, axle configuration: 3 axles, first registration: 02/2018, total length: 9,800 mm, total width: 2,450 mm, total height: 1,150 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 5,560 kg, Gross weight: 43,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2018, Twistlock configuration: 2x20 + 1x30 + 1x40 + 1x45 High Cube, Extendable chassis: center/rear, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 5 mm; Tyre tread right: 7 mm Axle 2: Tyre tread left: 14 mm; Tyre tread right: 7 mm Axle 3: Tyre tread left: 10 mm; Tyre tread right: 6 mm Weights Kerb weight: 5,560 kg Payload: 37,440 kg Gross vehicle weight: 43,000 kg Functional Loading platform height: 110 cm Environment Emission class: Euro 0 Psdpfxjyylkzs Abhspu Condition Overall condition: Average Technical condition: Average Optical condition: Average Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory covers all European brands, year ranges, and price categories. Why buy at Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognisable quality • Competitive pricing • Fair trading practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of "recognisable quality" • And more… Please visit our website for special offers and our complete stock: Leasing via Kleyn Trucks is available in most European countries! Calculate your lease rate quickly and send a request via our website. Ask directly about our European warranty packages.

Condition: good (used), Perfecta BSB 3L Paper Jogger with Roller The machine is 100% functional and in perfect condition. This is the latest design from a German manufacturer. Year of manufacture: 2016. Technical specifications: Ppjdpfsy Sd T Esx Abhou Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table with micro-perforation Tilt angle adjustment Jogging frequency adjustment (inverter) Adjustable force and speed of the air squeezing roller. Chrome-plated table surface Full documentation set.

Condition: excellent (used), Year of construction: 2004, Gofa semi-trailer cryogenic for nitrogen, argon, oxygen, LIN, LOX, LAR. Year: 2004 Working pressure: 3 bar Volume: 12000 L Ppjdpfork Na Ajx Abhju We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide. We will be glad to answer your questions via phone and e-mail

Condition: used, empty load weight: 7,840 kg, maximum load weight: 30,160 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2020, Equipment: tail-lift, Unladen weight: 7840 kg, Permissible total weight: 38000 kg, Cargo space (L W H): 13,620 mm x 2,480 mm x 2,700 mm, Tire size: 385/65 R22.5, Cargo space volume: 91 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Front lift axle, Tail lift: DHOLLANDIA. You will find an overview of all our available vehicles on our website. Need financing? We offer customized financing options, as well as full-service or telematics services. We will be happy to provide you with personal advice. Pedpfx Aezg Nvrobhepu

Condition: refurbished (used), Year of construction: 2015, Durst P10-200 sign printer with Corrugated Option, fully automatic Resolution: 10 pl - 1000 dpi Color: 6C + (optional White) Very low operating hours Speed up to 2025 m2/h Fully automatic loader (feeder) Pedpfxoy Amckj Abhjpu Fully automatic unloader (stacker) INK: For paper and board with very low odor Options: - Corrugated option with 2 rails to lower material - Corrugated static bar for different material thicknesses - Corrugated software to control media and thickness - Understatic bar and automatic media stop for crash protection - Caldera Rip software

Condition: used, empty load weight: 7,000 kg, axle configuration: 3 axles, first registration: 10/2018, Year of construction: 2018, gearing type: mechanical, Tare weight: 7000kg, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Pjdpszhpm Tofx Abhopu

Condition: used, axle configuration: 3 axles, first registration: 09/2018, total length: 9,800 mm, total width: 2,450 mm, total height: 1,150 mm, suspension: air, color: other, Year of construction: 2018, Equipment: ABS, = Additional options and accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6480 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2018, Steering direction: 2x20 + 1x30 + 1x40 + 1x45 high cube, Extendable chassis: middle / rear, Axle type: JOST = Further information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 1 mm; Tire tread depth right: 10 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 11 mm Weights Unladen weight: 6,480 kg Payload: 36,520 kg GVW: 43,000 kg Functional Loading platform height: 110 cm Environmental Emission class: Euro 0 Condition Ppedpfsy Da I Njx Abhju Overall condition: average Technical condition: average Optical condition: average Damage: none Financial information Leasing price: €221 per month (default, 60 months); Inquire for further information and conditions = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 09/2018, total length: 9,300 mm, total width: 2,500 mm, total height: 1,350 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = Pjdpfx Abeyxl E Nshopu - EBS = Notes = Number of axles: 3, Tare weight: 4100 kg, Gross vehicle weight: 43000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2018, Axle type: SAF = Further Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 11 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 11 mm Weights Unladen weight: 4,100 kg Payload: 38,900 kg GVW: 43,000 kg Functional Loading height: 120 cm Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €185 per month (standard, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 09/2018, total length: 9,300 mm, total width: 2,500 mm, total height: 1,350 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Type of chassis: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2018, Axle type: SAF = Additional Information = General Information Cabin: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Transmission: Manual transmission Ppjdeyxl E Ajpfx Abheu Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 9 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Functional Loading platform height: 120 cm Environmental Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 08.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €185 per month (standard, 60 months); Inquire for more information and conditions = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Sound business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 06/2002, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2002, Axle configuration Tire size: 385/65 R22.5 Axle brand: Fruehauf Podszgmh Eopfx Abhjpu Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Rear axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Rear axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Weights Unladen weight: 5,980 kg Payload: 32,020 kg GVW: 38,000 kg Condition Damage: None