Used Unloader Unloader for sale (1,789)

Condition: used, Year of construction: 2012, machine/vehicle number: LV45, Technical Summary and Application Scope – ATES Giorgia 6000 bphThe ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections.Main Technical DataType: Industrial glass bottle washer and rinser, suitable for recycled and new bottles.Nominal output capacity: up to 6,000 bottles/hour depending on bottle format, contamination level, and line configuration.Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows.Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance.Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing.Installed electrical power: approx. 20 kW.Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley).Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar.Drainage: integrated rinse and tank drainage via 2″ pipeline.Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection.Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage.Filtration: internal filtration plus 0.2 μm microfiltration for process water.Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency.System Architecture and Process FlowReturnable bottle cycle (full washing and rinsing)Automatic loading into baskets via push bars.Pre-wash spray to remove dirt and label residues.Immersion in hot caustic bath to disintegrate adhesives and organic matter.High-pressure internal and external washing through jetting manifolds.Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water.Continuous label and debris extraction with filtration to prevent clogging.New bottle cycle (rinsing only)Spray pre-wash.Pre-treatment with detergent solution. Njdpfx Alsxqmqzohswh

Year of construction: 1982, condition: used, Manesty – ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP system to guarantee fast return to production In conjunction with our m-tecTM control system, Oystar Manesty provides a fully validatable Clean in Place (CIP) option. From the initial rinse through to compressed air cleaning of solution tubes, the XLTMCota Clean in Place (CIP) was designed to promote fast return to production by eliminating the need for manual cleaning. Simple and fast loading and unloading facility Nwodpfx Aozg I T Ajlhsh Tablets can be loaded with the front door closed or open using simple load chutes designed to suit different types of containers. Tablets are discharged by reversing the direction of the drum. This method has been proven to be extremely fast and gentle at the same for safe handling of the finished product. TECHNICAL INFORMATION Weight : 1590 kg Coater Dimensions : H 2065 x W 1665 x D1475 Spray Guns : 3 Working Volume : 170 L Compressed Air Consumption (5bar from Coater) : 7.9 Air Volume Range (m3/hr) : 1500 – 2500 Main Heater Temperature Range (°C) : 10 – 85 Main Heater Steam Consumption ( kg/hr ) : 117 Sold with : Donaldson Torit – Dust collector DCE DF02 12R

Year of construction: 2016, condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MAX CUTTING THICKNESS: 16 mm mm MIN CIRCULAR SECTION: 80 mm MAX CIRCULAR SECTION: 610 mm MAX SQUARE SECTION: 400x400 mm MAX RECTANGULAR SECTION: 500x300 mm SOURCE: ROFIN DC045 ; 4500 W CONTROL UNIT: SIEMENS 840D WEIGHT: 100000 Kg Njdpfjytkdlox Alhowh ACCESSORIES: FUME EXHAUSTER NOTE: LENGTH OF LOADING BAR MIN.4.000-MAX 18.000 mm; LENGTH OF UNLOADING BAR MIN. 3.000 - MAX 12.500 mm; SHORT PIECE UNLOADING LENGTH UP TO 3.200 mm; 3D HEAD; CAPACITIVE SENSOR; AUTOMATIC SETTINGS; BOOSTER; FOCUS AUTOMATIC ADJUSTMENT

Condition: used, 8 m Office Container / Shipping Container – with WC, Storage & Full Equipment – Available Immediately! PRICE: €7,500 negotiable, ex Dunkirk, France AT A GLANCE: ✅ Office, WC & storage in one container ✅ Fully equipped: heating, sink, heavy-duty power, awning ✅ Ready for immediate delivery – only 2 units available! DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in excellent condition – perfect as office containers, site containers, or storage containers. The containers come from the French CARGLASS fleet and feature high-quality fittings. All technical components are fully functional and ready to use. The condition is guaranteed and will be documented on the invoice. Overview of equipment: ✅ Separate WC with washbasin ✅ Office area with plenty of natural light ✅ Kitchenette with sink & hot water boiler ✅ Storage room ✅ Heating & air conditioning ✅ Electric awning 3x7 m with remote control ✅ Heavy-duty power connection, electrical installation & exterior lighting ✅ Ramp & fire extinguisher Special features: ✅ Practical layout: office – WC – storage ✅ Original photos – condition as shown ✅ Ideal as a construction site office, container office or mobile service point ✅ Technically sound, ready for immediate use Nwedpfjzgwk Dox Alhsh DELIVERY & AVAILABILITY: ✅ Delivery within a maximum of 2 weeks ✅ Delivery costs (without unloading): upon request ✅ Immediate availability: 2 units ex Dunkirk, France Contact us now to inquire & reserve! We will gladly provide additional photos, technical drawings, and details upon request. NAUTEXA GmbH

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,992 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 300 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,100 mm, spindle motor power: 10,500 W, total height: 2,470 mm, total width: 2,110 mm, overall weight: 11,200 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl SLIMline, product length (max.): 5,190 mm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG MORI CLX 450 TC + Robo2go was manufactured in 2021. It features a swing diameter over bed of 500 mm, a turning diameter of 400 mm, and a maximum turning length of 1100 mm. The machine includes a powerful milling spindle with speeds up to 12,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 TC + Robo2go machine we have for sale. Contact us for further details. • Status: Demonstration / Training / Exhibition Machine • Control: Siemens SINUMERIK 840D sl SLIMline, 19" SLIMline multi-touch display • Swing over bed: 500 mm • Max turning diameter: 400 mm • Max turning length: 1100 mm • Bar capacity: 65 mm • Main spindle bore: 87 mm • Front bearing diameter: 130 mm • Knick speed: 485 rpm • Spindle torque (100% duty): 275 Nm • Spindle torque (40% duty): 345 Nm • Milling spindle interface: Capto C6 (Sandvik) • Milling spindle speed: up to 12,000 rpm • Milling spindle power (100% duty): 8.8 kW • Milling spindle power (40% duty): 10.5 kW • Milling spindle torque (100% duty): 73 Nm • Milling spindle torque (40% duty): 90 Nm • Holding torque (locked): 850 Nm • Swivel range: ±120° • Tool magazine: chain type • Tool capacity: 30 tools • Max tool diameter: 78 mm • Max tool diameter with adjacent free pockets: 125 mm Additional equipment, price on request • Robo2Go flexible workpiece loading/unloading system with 6-axis industrial robot • Interchangeable workpiece storage with trays • Capacity: up to 88 parts (Ø ≤ 60 mm); up to 29 parts (Ø ≤ 125 mm) • Robot Payload: 35 kg (available Robot Modules: 10 kg / 20 kg / 35 kg • Gripper base: triangular with blow-off nozzle; manual pressure adjustment • 3-jaw gripper for chuck parts (internal/external) • Minimum workpiece length: 20 mm • Diameter range external: Ø20–100 mm (module dependent) • Diameter range internal: Ø65–210 mm • 3-jaw gripper variants for shaft parts: Ø20–170 mm • Additional 2-jaw grippers for chuck/shaft parts: Ø20–80 mm (shaft parts) • Trays: max load 500 kg; workpiece Ø20–170 mm; length 120–950 mm; up to 5 levels • Interfaces: electrical interface for Robo2Go, Profibus, additional compressed air, additional Ethernet • Separate control terminal; integration into CELOS control • Robot special coating: RAL 9010 • Machine prepared for automation integration Technical Specification Nwodpezd Uxyefx Alhoh Counter Spindle Yes Driven Tools Yes Through-spindle Coolant Yes

Condition: new, Thomas Super Trad 301 So Easy – Semi-automatic metal bandsaw Promotional price: €9,400 instead of €11,100, excluding VAT. Capacity, round: 255 mm - The SO EASY saw enables a complete cutting cycle without constant operator presence thanks to the hydraulic control system for lowering the saw frame. - Hydraulic vice - Limit switch to adjust the saw frame return position directly above the material to be cut - Selector switch to switch to MANUAL cutting mode with a button for quick access to the material to be cut - Central control panel on the front of the machine with a bright alarm system - Automation is controlled via a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large, round "plateau" work table that rotates with the blade during miter cuts, guaranteeing excellent support for the material to be cut. This system prevents the saw blade from cutting the work table, as is the case with conventional bandsaws. - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for quick movements and is mounted on a rail to allow for lateral movement. - Cuts from 0° to 60° to the right and 45° to the left are possible - Saw blade rotation with 2 electric speeds - Saw blade tension adjustment via handwheel and safety microswitch in case of blade breakage or insufficient blade tension - Coolant electric pump - Saw blade cleaning brush FEATURES - Saw frame, vice and plateau made of cast iron - Precision saw blade guide with carbide pads and adjustable rollers - Gears immersed in oil STANDARD EQUIPMENT - Adjustable stop with millimeter scale - Hydraulic vice - Material support bracket - Bimetal M42 saw blade 2750 x 27 x 0.9 mm - Set of service keys - CE certification and operating and maintenance manual OPTIONAL - Roller conveyor loading side (2 m) - Roller conveyor unloading side with stop (2 m) - Blada minimal lubrication system Nsdpfxozcpkpe Alhswh - Start pedal Technical data - Capacity, round 0°: 255 mm - Capacity, round < 45°: 160 mm - Capacity, round 45° >: 200 mm - Capacity, round 60° >: 110 mm - Capacity, square 0°: 250 mm - Capacity, square < 45°: 160 mm - Capacity, square 45° >: 190 mm - Capacity, square 60° >: 110 mm - Capacity, rectangular 0°: 300 x 220 mm - Capacity, rectangular < 45°: 190 x 100 - 150 x 170 mm - Capacity, rectangular 45° >: 190 x 170 mm - Capacity, rectangular 60° >: 110 x 130 mm - Saw blade dimensions: 2750 x 27 x 0.9 mm - Saw blade speed: 33/66 m/min - Vice clamping width: 305 mm - Saw frame inclination: 30° - Working height: 940 mm - Gear reduction ratio: 40/1 - Flywheel diameter: 300 mm - 3-phase electric motor: 1.0 - 1.4 kW - Electric pump: 0.11 kW - Machine dimensions WxHxD: 800 x 1600 x 1800 mm - Machine weight: 440 kg

Condition: used, Year of construction: 2014, Fanuc M-710iC/50 with R-30iB The Fanuc M-710iC/50 is a medium-payload, multi-purpose industrial robot designed for high-speed performance and versatility. When paired with the R-30iB controller, it provides a robust solution for applications ranging from material handling to machine tending and polishing. Specification,Details Njdpfx Alsyz Rfaohowh Controlled Axes,6 Max Reach,2050 mm Max Payload,50 kg Weight (Arm),Approx. 560 kg Motion Range (J1),360° Max Speed (J1),175°/s Common Applications Material Removal: Grinding, deburring, and polishing. Machine Tending: Loading and unloading CNC machines or injection molding presses. Palletizing: Handling boxes or bags within its 50 kg weight limit. Assembly: Precise part placement in automotive or general manufacturing lines.

Condition: excellent (used), Year of construction: 2024, operating hours: 12,675 h, functionality: fully functional, A total of four identical KAPP gear grinding machines are for sale. KAPP NILES KX 260 TWIN Machine type: CNC gear grinding center / hobbing and profile grinding machine Manufacturer: KAPP NILES GmbH & Co. KG Number of machines for sale: 4 Address according to nameplate: Callenberger Straße 52, 96450 Coburg, Germany Model: KX 260 TWIN OEM machine number: XXX Year of manufacture: 2024 Inventory No. PPS: XXX Control: Siemens SINUMERIK Machine concept: TWIN / dual-spindle concept with rotary table Machining process: continuous hobbing grinding, optional profile grinding Automation concept: automatic loading, robot cell / FANUC loader visible Robot: FANUC Robot M-710iC/45M visible Condition: machine is powered on / screen is active / very modern, clean overall impression Manufacturer's specifications KX 260 TWIN Max. face diameter: 260 mm Max. workpiece length: 770 mm Module range: 0.5 – 6 mm Max. gear width: 320 mm, with corresponding design up to 520 mm Max. helix angle: ±45° These values correspond to the KAPP-NILES-KX-TWIN series; KAPP NILES describes the KX 260 TWIN as a machine for continuous hobbing grinding with dressable and undressable tools and specifies exactly these limit values for the KX 260 TWIN. Technical machine concept According to KAPP NILES, the KX TWIN series is designed for high production volumes in the medium and large series production of gears and shafts. The concept includes two identical workpiece spindles, which are arranged opposite each other on a rotary table. While one workpiece is being machined, the second workpiece spindle can be loaded and unloaded in parallel and aligned. Equipment / visible features Siemens SINUMERIK CNC control KAPP NILES operating interface TWIN spindle concept / two workpiece spindles Rotary table / indexing table Automatic loading cell FANUC M-710iC/45M robot Robot gripper / handling gripper visible Protective housing / safety cell Grinding wheel mounting / grinding spindle area visible Profile / hobbing grinding area visible Coolant / grinding oil area Work area lighting Full protection cabin Manual control unit / electronic handwheel on the control panel Signal light / traffic light CE marking visible on the machine housing Documentation holder / machine documents visible on the machine Electrical data according to nameplate Normal supply: 400 V AC Frequency: 50 Hz Normal power supply voltage: 400 V AC Control voltage: 24 V DC Lighting: 22 W / 230 V Installed power: 110 kVA Rated current: 79 A cos φ: 0.64 Fuse: 100 A gL Control cabinet weight: 1,000 kg Operating hours according to the counter in the photo T1 Total operating time: approx. 12,675 h T2 Net operating time: approx. 5,538 h Nwsdezdv Shepfx Alheh Additional photos and videos available upon request.

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Nwedpfxozbg Ezs Alhjh Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Year of construction: 2019, condition: good (used), 7 units of telescopic conveyor belts, MAXX REACH, 27m total length – used: Price per unit ex works: only €18,950 (net), including loading! Price for the purchase of 3 units: only €16,950/unit (net) ex works! Price for complete purchase: only €15,950/unit (net) ex works! Manufacturer: FMH CONVEYORS INT. LTD. Model: MAXX REACH Type: MR3185-800 Year of manufacture: 2019 Serial number: e.g. W190103-02-03 Nwjdszcxz Ropfx Alheh According to the manufacturer, extends to a total length of approximately 27m. Length when retracted: 8.80m This means the device extends approximately 18m! Width of main body: approximately 1.20m Total width approximately 1.53m plus motor on the side approximately 20cm 3-stage telescopic design Ideal for unloading trailers – the device can then also be positioned approximately 5 – 6m away from the unloading door, i.e. a forklift can still drive past it in the retracted state! Height: approximately 1.22m Total weight: 6,744 kg Belt width: 80cm 4.5kW, 3+N+E/V400/Hz50 Condition: good – very good, the devices were only used for approximately 9 months at Amazon! Available: immediately Location: Frankfurt a.M. area, later storage in Frankenberg / Saxony.

Condition: new, empty load weight: 360 kg, maximum load weight: 1,640 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, total length: 1,640 mm, total width: 1,110 mm, total height: 3,810 mm, suspension: steel, tire size: 165R13C 96/94N, construction height: 1,110 mm, Multi-purpose trailer prepared for transporting various types of material. Wheels under the transport surface The transport surface is wider and set higher than in other luggage trailer series, making manual loading and unloading easier. All side walls are removable, so the load can be loaded freely, e.g. with a forklift truck. Underframe made of structural steel, closed profile, bolted. Floor made of high-quality, waterproof and non-slip plywood. Possibility of attaching high welded steel mesh walls. | HIGH LOADER + 250/2 2T | Steel frame | Dimensions of loading area: L: 2.54m W: 1.51m Height of side wall: 0.40m | 8 lashing rings (4 left, 4 right) recessed in the floor | Knott axle with drum brake | Leaf spring suspension | Operating voltage 12V | Spindle parking brake | Front railing | Spare wheel on front wall | Errors, input and advance sales reserved. Nwjdpfxeu R D Sks Alhoh

Condition: used, Year of construction: 2022, power: 13 kW (17.68 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 8,500 kg, We are offering this used KiMLA BPF 2171 4-axis CNC machining center, manufactured in 2022. The package includes a KOGI dust extraction unit in a two-bag configuration (2.2 kW / 1,650 Pa), SCHMALZ distance and vacuum suction cups (suitable for 4-axis operation), an adjustable angular head for 4-axis machining, and a wide range of additional accessories. A valuation report is attached. Key features 4-axis machine – wide machining capabilities HSD 9 kW spindle, 24,000 rpm, ISO30 Automatic tool changer Dual vacuum foot with automatic lowering system Working area: 2,100 × 7,100 mm Tandem working mode: simultaneous machining on one side of the table while loading/unloading parts on the other, significantly increasing productivity Large working area enabling machining of non-standard and extra-long parts Nwjdpfxey Exyts Alhoh Pneumatic positioning pin system for fast and precise material positioning SCHMALZ vacuum cups for high-quality workpiece holding Condition and usage Machine currently in continuous production (can be inspected in operation) Regularly serviced Ready for immediate deployment Inspection in person or video presentation is possible. Additional equipment Chip extraction system included Optional (separate offer) Becker VariAir Control vacuum system Possibility to operate 2–3 CNC centers simultaneously, significantly improving energy efficiency Machine data Type: BPF Model: 2171 Serial number: 3586 Year of manufacture: 2022 Power supply: ~400 V Frequency: 50 Hz Power: 13 kW Weight: 8,500 kg Air pressure: 8 bar Axis travel (X × Y): 2,100 × 7,100 mm Z-axis travel: 400 mm Spindle: HSD 9 kW, 24,000 rpm, ISO30 Table type: Vacuum table Control system: 3D control module Drives: Digital AC servo drives Technology: High-Speed Machining (HSM) Tool length correction sensor included Control computer and operator panel included C-axis for angular aggregates Adjustable angle aggregate Extraction hood with support foot Automatic tool changer Rotary tool magazine Positioning pins, automatic (2 × 7 pcs) Base positioning pins (4 pcs) 6 SCHMALZ vacuum cups (single-ring type) PC-CAM machine control software Control system with dynamic toolpath optimization improving cutting smoothness and feed dynamics Integrated CAD/CAM module for part design and toolpath generation Remote diagnostics via internet Electronic gantry angle correction 20 kHz position controller frequency enabling higher dynamics, especially in curves Direct support for .dxf and .dwg files in control system Real-time hardware interpolation via control computer Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: used, Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, 5-Axis Machining Center This machine was used as a showroom machine from 2016 to 2022. From 2022, the machine was used for production at HAL Plauen for the processing of axle carriers. Before being used for production, the machine was completely overhauled/refurbished. In December 2024, a new milling spindle was purchased (the spindle has approximately 500 operating hours). Machine operating hours: 24,000 Working area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed rate / Rapid traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table load capacity: Nwedpfezc Ekrjx Alhjh -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s with chip conveyor and chiller/cooling unit • Manufacturer: Lahntechnik GmbH • Model: KESY 280-01 • Serial number: 2017-05981 • Year of manufacture: 2017 • Power rating: 13.6 kW • Nominal voltage: 400 V / 3~ / PE / 50 Hz • Control voltage: 24 V DC • Protection class: IP 54 • Refrigerant: R410A – 10.03 t CO₂ equivalent • Max. operating pressure: 30 bar (HD) / 19 bar (ND) • Empty weight: 400 kg • Country of origin: Germany The machine/asset does not include any product-related tools/fixtures or grippers (robots). The machine was taken out of production in October 2025 due to the factory closure. It is still powered on and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please review the videos available, which were taken of the machine in December 2025. Transport locks are not required. For loading and unloading, special Wenzler lifting/transport equipment is required. This equipment must be rented directly from Wenzler/Heller Group by the buyer. After lifting and unloading, the buyer must return the equipment to Wenzler.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, laser type: fiber laser, laser source manufacturer: IPG, pipe diameter (max.): 120 mm, pipe length (max.): 6,500 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, For sale: BLM GROUP LT5 tube laser cutting machine. The machine is fully operational. Laser is equipped with tube bundle loader und part collecting bench. Technical specifications: • Model: LT5 • Laser type: Fiber • Laser source: IPG YLR-1000-MM-WC Machine: • Fully operational in production • Integrated loading and unloading system • Test cuts possible during operation • High cutting quality and precision • Regularly maintained and used Nsdpozd Sccjfx Alhswh • Ready for immediate operation Additional photos and videos of the machine in operation can be provided upon request, as well as the possibility to inspect the machine during operation on site.

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Nwedot Hw R Dopfx Alhjh Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. Nwsdpfxot Hw D Rj Alhjh The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, Nedpfx Ast Hxa Telhewh * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Nedpfx Aewftt Uolhowh Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: excellent (used), Here, we offer a Mytron drying cabinet. The WT 850 drying cabinet is used for the simultaneous drying of multiple products or auxiliary devices in the semiconductor industry. Due to its robust design (box-profile frame construction) and the use of stainless steel for the heating chamber, the WT 850 drying cabinet can be used in a variety of applications. The rolling trolley allows for easy loading and unloading of the WT 850 drying cabinet. An exhaust nozzle with an adjustable damper allows the cabinet to be connected to a central extraction system. Technical data: External dimensions: Width 1145 mm x Height 1880 mm x Depth 1810 mm Dimensions of the heating chamber: Width 850 mm x Height 690 mm x Depth 1410 mm Volume of the heating chamber: approx. 830 liters Weight: approx. 230 kg, trolley 50 kg Temperature range: 10°C above ambient temperature to +120°C Spatial temperature consistency: ± 1°C Temporal temperature consistency: ± 1°C Nwodpfx Aszd R Tmolhjh Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug Power consumption: 4.5 kVA Fuse rating: 3 x 16 A, 1 x 6 A Control: Digital controller Safety device: adjustable over-temperature protection Pass-through opening: Exhaust nozzle 100 mm with adjustable damper at the top Intake nozzle 100 mm with adjustable damper at the top Type: WT 850 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Nwedpfx Ajzd Rmgjlheh Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Year of construction: 2021, condition: ready for operation (used), total width: 1,200 mm, total height: 2,300 mm, product length (max.): 1,200 mm, Automation system manufactured in 2021. This AMADA Jupiter System features a PLC controlled micro resistance welding technology with a workspace of 624 × 550 mm and a maximum welding area of 540 × 450 mm. It includes advanced capabilities such as welding automation, vision inspection, and data connectivity. If you are looking to get high-quality battery pack welding capabilities, consider the AMADA Jupiter System we have for sale. Contact us for further details. 40x units of Jupiter systems available (considered as a whole): welding automation includes the XYZ portal control system, welding control, welding monitoring, vision system, and data connectivity. Cooling units are not included. AMADA Jupiter Advanced Battery Pack Welder (2021) General • Model: Jupiter Advanced Battery Pack Welder • Condition: Very Good / Well Maintained • Machine Dimensions: 1,200 × 1,200 × 2,300 mm • PLC Controlled System • ISQ / MNC Welding ControllerMachine Type • Automated Micro Resistance Welding System • Battery Pack / Battery Module Welding SystemWelding Technology • Micro Resistance Welding • Frequency: 10 kHzWorking Area • Workspace: 624 × 550 mm • Welding Area (max.): 540 × 450 mm • Vision Area (max.): 540 × 450 mmPerformance • Welding Cycle Time: 1.8 sec (weld point to weld point) • Vision Inspection Time: 1.2 sec (vision point to vision point) • Operating Hours: range of 5,000–40,000 hElectrical Data • Power Supply: 400 VAC • Main Fuse: 40 A • Power Consumption: 2 kVAPneumatics • Compressed Air Requirement: 6 bar clean dry air Optional Equipment, not included • Robot Loading System • Vision System • SQL Database Traceability • Electrode Holders • Spare Electrodes Optional Robot Loading System General • Application: Automatic Loading / Unloading of Battery Packs • Integration: AMADA Jupiter Welding System • Robot Loading Machine 25Equipment • Automatic Part Handling • Integrated Vision Inspection • Integrated Welding Process Optional: 3x ASIC Robotics Steckautomat V (2022), price on request General • Manufacturer: ASIC Robotics AGApplication • Automatic insertion / assembly of battery cells • Suitable for 18650 cells • Suitable for 21700 cellsCompatible Cell Holder Types • Senec V2 • StreetScooter V6 • Ocado • LightyearPerformance • 1 × 4 cells simultaneously: approx. 1.0 sec/cell • 2 × 2 cells simultaneously: approx. 1.0 sec/cell • 4 × 1 cell: approx. 1.3 sec/cell • Technical efficiency: 95%Electrical Data • Voltage: 3 × 400 / 230 VAC • Frequency: 50 Hz • Fuse Protection: 25 A • Supply Cable: 6 mm²Pneumatics • Operating Pressure: 6–10 bar • Air Connection: Ø14 plug connection • Air Quality: Dry and oil-freeDimensions • Machine Height ASIC Roboter incl. Signal Tower: 2,720 mmWeight • Approx. 2,100 kgEnvironmental Conditions • Ambient Temperature: +5 °C to +40 °C • Relative Humidity: 45–85% non-condensingNoise Emission • Average Noise Level: 75 dB(A) Nwedpfjzdrazex Alheh

Condition: used, Year of construction: 2008, machine/vehicle number: DEPAL43, Used TMG VEGA 60 automatic Depalletizer 5000 BPHTechnical Specifications & Performance DataThis Automatic Depalletizer VEGA 60 is a robust solution engineered for reliable bottle handling in industrial packaging environments. Manufactured by TMG, it supports efficient unloading of bottles from pallets and integrates automatic interlayer management for streamlined operation. With a production speed of 3000 bph, it is well-suited for medium-capacity beverage production and used bottling line applications. Its design ensures consistent performance for both PET and Glass containers, particularly in 1.5L formats.Manufacturer: TMGModel: VEGA 60Year: 2008Production speed: 5000 bphBottle formats: Compatible with 1.5L bottle formatsContainer types: Designed for Glass bottle handlingAutomation: PLC-controlled operationSafety: Electronic safety barrierInterlayer management: Tier-sheet magazine with automatic interlayer removal; can remove protective hoods from the same magazineAdvanced Automation & Control SystemsThe VEGA 60 features PLC-based automation for precise and repeatable operation across shifts. The control logic enables smooth layer-by-layer depalletizing, coordinated motions, and clear fault diagnostics. The electronic safety barrier provides active operator protection, ensuring safe access during setup and maintenance while maintaining productivity. Quick settings allow fast adaptation to standard 1.5L bottle handling and efficient start-up after pauses.Production Line Integration CapabilitiesThis depalletizer integrates easily within new or second hand bottling equipment configurations. It can operate as a standalone depalletizing module or inline with conveyors, accumulation tables, rinsing machines, and downstream filling, capping, and labeling machinery. The automatic tier-sheet handling reduces manual intervention between layers, improving flow to subsequent packaging machinery. Its design supports both PET and Glass bottle logistics, making it a flexible choice for beverage production lines handling water, juice, beer, or wine in compatible formats.Machine Condition & Maintenance HistoryProfessionally engineered by TMG in 2008, this machine is presented as a second hand industrial packaging asset suitable for immediate integration once installed and commissioned. The PLC control and robust mechanical design contribute to predictable maintenance intervals and long service life.Operational Performance & VersatilityAt 3000 bph, the VEGA 60 is ideal for medium-output operations seeking dependable depalletizing performance. Automatic interlayer and hood removal minimize manual handling, reducing changeover time between pallet layers and enhancing workplace safety. The system is optimized for 1.5L bottles and supports both PET and Glass containers, aligning with a wide range of beverage production requirements and used bottling line upgrades.Installation Requirements & Site PreparationThe depalletizer requires adequate floor space for pallet infeed, tier-sheet magazine access, and discharge conve... Nedpfxozc Hqyo Alhswh

Condition: excellent (used), Fill 3D Ultrasonic Cutter Here we offer a Fill 3D ultrasonic cutting system. FILL 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasound-actuated cutting systems. Your advantages: Ergonomic loading and unloading Simple creation of cutting programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic cutter with low space requirements and simple kinematics. The Siemens CNC 840 D control system allows the cutting device to be programmed like a machine tool. Tool corrections or path changes can be easily carried out directly on the machine. As standard, the machine is equipped with a 20 kHz ultrasonic cutting unit. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis to allow cutting of tight radii and to save other axis movements (5 + 1 axes). Technical data: Machine data Part length max. 1,000 mm Part width max. 900 mm Part height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control Siemens Sinumerik 840D sl Technical data overall system: Fill 5-axis guided CFRP cutting system Type: SM - 03 Electricity: Supply voltage: 3 x 400 V AC Supply frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3,920 mm Width: approx. 3,400 mm Height: approx. 3,500 mm Weight: Total weight: approx. 1,500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Type: Fill 5-axis guided CFRP cutting system Type: SM - 03 Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone. Nodpezdy Iaofx Alhowh

Condition: new, functionality: fully functional, Year of construction: 2025, Tube laser cutting machine 6m/6m 6000/12000W Laser source: MAX Photonics Tube diameter: 20–350 mm Laser head: Raytools BS12K straight 2D head 6000 mm automatic loading, 6000 mm unloading Three vertical chucks Servo-assisted unloading table Nsdpfx Alewty R Aehjwh CNC control: FSCUT5000 EtherCAT-BUS CAD/CAM software: TubesT, Tube Pro Load capacity up to 500 kg

Condition: new, Year of construction: 2025, Laser source: 3kW Raycus Laser head: Raytools autofocus Control system: FSCUT 5000 A Nedpji Arwljfx Alhewh Loading of pipes up to 6400 mm long, unloading up to 4000 mm Positioning accuracy: ±0.05/1000 mm Acceleration: 1 m/s² Rotational speed: 120 rpm Max. positioning speed: 100 m/min Max. weight of a pipe: 250 kg Pipe diameter: 15-230 mm Overall machine size: 12728 × 3400 × 2450 mm